GENERAL-PMMSY-Mechanical conveyor system and automation at Ponnani Fishing Harbour-General Civil Work

Amount

Supply and installation of Mechanical Conveyor System and Automation at Ponnani Fishery Harbour

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.22.1:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars

2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

13.3.1:20 mm cement plaster of mix:1:4 (1 cement : 4 fine sand)

OD9579/2024-2025:Supply and Installation of Heavy duty type, motorised overhead conveyor hoist & overhead trolley with capacity 500 Crates ( each weighing 60kg )per hour. This includes 1. Motorised Hoist consisting of - Gear motor of minimum capacity 5 HP to lift a load of at least 8 nos of fish carrying crates, each crates having max. size 650mm L X 445mm W X 300mm H, net weight of 60 kgs at a time with a Lifting Speed of Min 20 Meters/min. suitable rating 3Ph. 415V 50Hz 1E2 eff. Class of preferred makes, corrosion grade to withstand saline atmosphere. Gear Box with Min Torque - 750 Nm and Preferable Gear Ratio 31, Winch with 10 mm dia SS304 wire rope of suitable length, drum of suitable size and hooks of suitable type, suitable to lift and drop the loaded caged platform in a controlled manner. Drive: Bidirectional, SS304 made UCP bearing: 1 set, Preferable Drum Diameter -140 mm made of SS 304, 10 mm thickness. Over head hoist shaft of material SS 304, diameter 56mm. All the Items must be corrosion grade to withstand saline atmosphere. 2.Motorised Trolley consisting of - 45mm SS 304 round bar as shaft,SS304 made UCP208/equivalent bearings, 2hp, 3 phase, 415/440V 5 Hz, IE2 efficient gear motor to transport a loaded cage platform of total weight of about 1250 kg (weight includes weight of motors, gears, hoists, etc.), Gear box having a minimum torque 150 N-m, preferable gear ratio 15, the trolley is capable of travelling at a speed of 30 m/min. The frame work should be made of SS 304 C-channel structure of thickness 6mm. A roof for trolley is to be installed as a protection from rain and bird excreta, etc. made of 1mm sheet whose frame work is to be made with 25 mm x 25mm x 2mm square tube. The rate includes cost of all materials, conveyance, loading and unloading, fitting charges etc complete

OD10153/2024-2025:Supply and Installation of Structural work for SS304 caged platform for accommodating 8 nos of fish crates, which includes 6mm plate, 40mm x 40mm x 2mm Square tube, ISF, suitable arrangements should be made to hook the caged platform to the overhead electric hoist including cost of all materials, conveyance, loading, unloading charges, welding, fitting, buffing nd finishing etc. complete as per direction of departmental officers at site. (Refer Code 10.2 of DSR 2018)

OD10154/2024-2025:Supply and Installation of SS wired mesh with 10 SWG at the door and sides of caged platform for crates including cost of all materials, conveyance, fitting, loading and unloading charges etc. complete as per direction of departmental officers at site

OD9584/2024-2025:Supply Fabrication and Installation of MS I beam, rail and structural supports ISMB 150 for trolley rails, and ,10mm plate base plates, 6mm plate as gusset plates and at T joints, SS fasteners and foundation bolts & Anchor bolts as per the Drawings.

OD10160/2024-2025:Supply and Installation of EN 8 hardened 30 mm square bar as rails to be installed above already fabricated ISMB 150 mm including conveyance, loading, unloading, fitting as per direction of departmental officers at site

OD10608/2024-2025:Galvanizing of all MS parts including I beams, Square rails, and other MS parts including Fastners in the whole automation system, including cost of all materials, conveyance, loading and unloading charges, labour, fixing after galvanizing etc. complete as per the direction of departmental officers at site

OD9577/2024-2025:Supply Installation Testing and Commissioning of Electrical & automation, electrical control panel, ,MS/GI powder coated of suitable size, 1.5m Thick IP 65 protection, MCCB 63 A 4P, 3 phase with spreaders and ELR, VAF type energy meter, 3 set current transformers 100/5A,3 pole MCBs 4 Nos, VFDs for all motors according to the rating, PLC + extension cards, SMPS - 24 V, Inter posing relays, contactors and other interlock, protection circuits, wires, ducts, fasteners etc, indicators, push buttons , cables, glands, power sockets, limit switches, emergency switches , indicators, tower lamps, hooters. Incomers, breakers etc of suitable ratings and preferred makes. PLC based, semi automatic control for overhead conveyors. VFD based drives for all equipments except portable equipments. Wires, ducts and other accessories of preferred makes Havells/RR Kabel or equivalent with best quality ensured. PLC programming has to be done in such a way that unloading of crates need to be done at 3 points according to the instruction of departmental officers at site

OD9581/2024-2025:Testing and Commissioning as per design and directions of Department officers at site including and obtaining necessary approval from all the needed state and central agencies for the successful operation of the automation system including trial run for minimum 3days, training for the operators etc. including cost of Consumables, welding and cutting gas , Cutting and grinding wheels, welding rods, polishing wheels fat the time of commissioning the automation system etc.complete

Vortex Automation (BID ID -2184011)

Bidder Name

R.V. Engineering Industries

Vortex Automation