Rate Contract of Miscellaneous Electrical Installation/Repairing Work at East and West side of Riverfront Premises of Sabarmati Riverfront Development Corporation Ltd. (Limit Up to Rs.30.0Lacs).

Name of Work: Rate Contract of Miscellaneous Electrical Installation/Repairing Work at

East and West side of Riverfront Premises of Sabarmati Riverfront Development

Corporation Ltd. (Limit Up to Rs.30 Lacs).

Item No Description Unit Rate without GST

PART A SITC Items

Point wiring for Light / Fan/ Bell/ Primary Point with 2-

1.5 sq. mm & earth wire of 1.5 sq. mm (green) both

are of ISI marked 1.1 kv grade FRLS PVC

insulated multi strand copper wires upto max length of

10 mt, in below type of pipe erected with 6A Tissino

1 Type ISI marked flush type switch / bell push and

accessories erected on Metal / PVC/ Wooden Box

covered with 3 mm thick PC(Polycarbonate) /Acrylic/

Laminated sheet. with necessary Lamp holder/ceiling

rose /H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling Pt

(c) with oval conduit / PVC casing capping double

lock type erected flushed on wall/ceiling complete Pt.

(e) in existing pipe erected flushed on

wall/ceiling complete Pt

(j) in existing pipe erected concealed in wall/ceiling

Point wiring for independent PLUG with

following size mains earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires upto

10 mt length, in following below of pipe erected

2 complete with ISI marked 3 / 5 Pin socket and

tissino type switch erected with earth continuity

connection erected on Metal / PVC/ Wooden box

covered with 3 mm thick PC (Polycarbonate) /

Acrylic / Laminated sheet.

[A] For 6 amp plug and 6 amp switch with 2-

(A) sq. mm Cu. Mains from near by

switchboard/db board upto 6 mt.

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling Pt.

(c) with oval conduit /PVC casing capping double

lock type erected flushed on wall/ceiling complete Pt.

(e) in existing pipe erected flushed on

wall/ceiling complete Pt.

(j) in existing pipe erected concealed in wall/ceiling

[B] 6/16A Plug and 16 amp switch with 2-2.5 sq.

mm Cu. Mains from mcb db boards.

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling Pt.

(c) with oval conduit /PVC casing capping

double lock type erected flushed on wall/ceiling Pt.

(e) in existing pipe erected flushed on

wall/ceiling complete Pt.

(j) in existing pipe erected concealed in wall/ceiling

[C] 6/16A Plug and 16 A switch with 2-4 sq.mm Cu.

Mains with 2.5 sq.mm (green) earthing wire

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling Pt.

(c) with oval conduit /PVC casing capping double lock

type erected flushed on wall / ceiling complete Pt.

(e) in existing pipe erected flushed on

wall/ceiling complete

(j) in existing pipe erected concealed in wall/ceiling

Point wiring for on board looped PLUG with

tissino type single pole ISI marked Switch and Socket

3 erected with necessary connections erected on

wooden /Metal/ PVC Box covered with 3 mm thick

PC(Polycarbonate) /Acrylic sheet for open /

[A] wiring for following size.

[B] For 16 Amp. Pt.

Point wiring for secondary light point with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires, in below type of pipe to be

erected complete with earth continuity and necessary

connection with primary light with accessories erected

4 on Metal / PVC / wooden box covered with 3 mm

thick PC (Polycarbonate) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder /

ceiling rose / H.D. Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will

be considered as Mains for Secondary Point.

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling Pt.

(c) with oval conduit /PVC casing capping

double lock type erected flushed on wall/ceiling Pt.

(e) in existing pipe erected flushed on

wall/ceiling complete Pt.

(j) in existing pipe erected erected concealed in

wall/ceiling complete Pt.

Point wiring for Two Way Controlled Light Point with

2-1.5 sq.mm & earth wire of 1.5 sq.mm (green)

both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr

length, in following type of pipe to be erected

concealed in / flushed on wall / ceiling complete with

6A Tissino Type ISI marked accessories with earth

continuity erected on Metal / PVC / Wooden box

covered with 3 mm thick PC(Polycarbonate) /

Acrylic sheet with necessary Lamp holder/ceiling rose

/ H.D. Connector as directed.

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling Pt.

(c) with oval conduit /PVC casing capping

double lock type erected flushed on wall/ceiling Pt.

(e) in existing pipe erected flushed on

wall/ceiling complete Pt.

(j) in existing pipe erected erected concealed in

wall/ceiling complete Pt.

Point wiring for Light /Bell with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length , in below type of pipe

erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type,

6 erected on PVC / Metallic/ Wooden box, single

mounting base frame covered with textured/

metallic /white front plate modules erected on / in

wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling

(c) with oval conduit /PVC casing capping

double lock type erected flushed on wall/ceiling

(e) in existing pipe erected flushed on

wall/ceiling complete

(j) in existing pipe erected concealed in

wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of .ISI marked

KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and hum

free EME step type electronic fan regulator mounted

and accessories with earth continuity of following type

7 erected on PVC / Metallic / Wooden box, single

mounting base frame covered with textured /metallic /

white front plate modules erected on / in wall / ceiling

as per pipe erected with necessary ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling

(c) with oval conduit /PVC casing capping

double lock type erected flushed on wall/ceiling

(e) in existing pipe erected flushed on

wall/ceiling complete

(j) in existing pipe erected concealed in

wall/ceiling complete

Point wiring for Individual Plug with & earth wire

of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch &

8 pin Plug erected on PVC / Metallic / Wooden box

covered with appropriate front plate modules erected

on / in wall / ceiling as per pipe erected with following

type of accessories.

[I] For 6A Plug and 6 A switch with 2-1.5 sq.mm

(I) Cu. Wire from nearby switchboard/mcb db board

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling

(c) with oval conduit /PVC casing capping

double lock type erected flushed on wall/ceiling

(e) in existing pipe erected flushed on

wall/ceiling complete

(j) in existing pipe erected concealed in

wall/ceiling complete

[II] For 16A Plug and 16 amp switch with 2-2.5

sq.mm Cu. Wire from mcb db board.

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling

(c) with oval conduit /PVC casing capping

double lock type erected flushed on wall/ceiling

(e) in existing pipe erected flushed on

wall/ceiling complete

(j) in existing pipe erected concealed in

wall/ceiling complete

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm

(III) Cu. Wire with 2.5 sq.mm (green) earthing wire

from mcb d b board.

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling

(c) with oval conduit /PVC casing capping

double lock type erected flushed on wall/ceiling

(e) in existing pipe erected flushed on

wall/ceiling complete

(j) in existing pipe erected concealed in

wall/ceiling complete

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base

9 frame covered with textured/ metallic/ white

front plate modules erected on / in wall / ceiling with

following type accessories

Providing following type of Modular Type

Accessories mounted with PVC /metallic/Wooden

box, single mounting base frame covered with

10 textured / metallic/white front plate, modules

erected with necessary connections as per site

situation directed by Engineer In charge.

(1)One No. SP 6 Amp.

(2) One No 5 pin plug

(4) TV Co-axial Socket outlet

(5) Electronic hum Free steps EME Fan

(6) Fuse units 10Amp. or 16 Amp.

(7) Blank Plate Single

(8) Computer RJ-45 socket

(9) 16 Amp. SP one way switch

(10) 6/16Amp. Universal socket

(11) 6 Amps. Bell Push

(12) 6Amp. / 16 Amp. Two Way switch

(13) 6A/10A/16A/20A/25A/32A Single pole Modular

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole

Modular MCB Switch

(15) 32 Amps. DP switch with Indicator

(16)32 amp DP main switch Oparating with energy

(18) 13 Amp. International Modular Socket

(19) Modular Indicating Call Bell

(22)16/20/25 Amp. Modular Starter for Motor / A.C.

(24) Batten Holder/Angle Holder with modular

frame with metal ring. Ea

Providing & erecting following type of Modular Type

11 Accessories with necessary connection. As desired

by Engineer In charge

(1) 6 Amp. SP one way switch Ea

(2) 16 Amp. SP one way switch Ea

(3) 6/16Amp. Universal socket Ea

(4) 6 A socket Ea

(5) LAN cable connector with ferule Ea

Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with necessary

PVC fittings & Junction boxes fixed with adhesive

solution & Clamps with following dia of pipes, in

approved manner as directed

Providing & erecting PVC Corrugated Flexible

Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following sizes.

Supplying & erecting UPVC Mini trunking (PVC

Casing-n-Capping) having double-locking

arrangement with grooves, trunking of size not below

12.5 mm in height as per IS with accessories

of PVC/Resin polypropylene not below 1.8 mm

thick duly sealed in joint & erected on wall / ceiling

of following size .

Providing and erecting Mains with 1.1 KV

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of

15 pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for

earth continuity of following size

(A) With medium class Rigid PVC pipe and

(a) 2 wire 1.5 sq. mm Mtr.

(b) 2 wire 2.5 sq. mm Mtr.

(c) 3 wire 1.5 sq. mm Mtr.

(d) 3 wire 2.5 sq. mm Mtr.

(e) 4 wire 1.5 sq. mm Mtr.

(f) 4 wire 2.5 sq. mm Mtr.

(C) With oval conduit / PVC casing capping

double lock type

(a) 2 wire 1.5 sq. mm Mtr.

(b) 2 wire 2.5 sq. mm Mtr.

(c) 3 wire 1.5 sq. mm Mtr.

(d) 3 wire 2.5 sq. mm Mtr.

(e) 4 wire 1.5 sq. mm Mtr.

(f) 4 wire 2.5 sq. mm Mtr.

(E) (E) in existing pipe

(a) 2 wire 1.5 sq. mm Mtr.

(b) 2 wire 2.5 sq. mm Mtr.

(c) 3 wire 1.5 sq. mm Mtr.

(d) 3 wire 2.5 sq. mm Mtr.

(e) 4 wire 1.5 sq. mm Mtr.

(f) 4 wire 2.5 sq. mm Mtr.

providing and erecting Mains with 1.1 KV

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type

16 of pipe to be erected in / on wall / ceiling with 2.5 sq.

mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following

(A) with medium class Rigid PVC pipe and

(a) 2 wire 4 sq. mm Mtr.

(b) 2 wire 6 sq. mm Mtr.

(C) with oval conduit / PVC casing capping

double lock type

(a) 2 wire 4 sq. mm Mtr.

(b) 2 wire 6 sq. mm Mtr.

(E) (E) in existing pipe

(a) 2 wire 4 sq. mm Mtr.

(b) 2 wire 6 sq. mm Mtr.

providing and erecting Mains with ISI marked, 1.5KV

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing

17 pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and

bolts if required.

(f) One wire 10.00 sq. mm Mtr.

(g) One wire 16.00 sq. mm Mtr.

(h) One wire 25.00 sq. mm Mtr.

(i) One wire 35.00 sq. mm Mtr.

(j) One wire 50.00 sq. mm Mtr.

(k) One wire 70.00 sq. mm Mtr.

(l) One wire 95.00 sq. mm Mtr.

(m) One wire 120.00 sq. mm Mtr.

(n) One wire 150.00 sq. mm Mtr.

Providing & Erecting approved make following size of

TV Co-axial flexible cable comprising inner

conductor of solid bare copper insulated with Foam

18 PE & Secondary conductor made of poly -

Aluminium film bonded Al. Braids @ suitable

coverage overall sheathed with black PVC

(c) RG - 6 CCS Mtr.

(d) RG - 11 CCS Mtr

Supplying & erecting approved make Telephone

Cable electrolytic copper conductor PE insulation

twisted in two pairs & wrapped with FRLS PVC tape

& sheathed with FRLS PVC or HFFR outer Jacket

20 suitable for telephone wiring & confirming to C-DOT

erected in existing pipe of following size of

conductors & nos.of pairs. With necessary

[A] Conductor Size 0.5 mm

(1) One Pair Mtr.

(2) Two Pairs Mtr.

(3) Three Pairs Mtr.

(4) Five Pairs Mtr.

(5) Ten Pairs Mtr.

(6) Twenty Pairs Mtr.

(b) Armoured [Jelly Filled]

(1) Ten Pairs Mtr.

(2) Twenty Pairs Mtr.

(3) Fifty Pairs Mtr.

(4) One Hundred Pairs Mtr.

Supplying & erecting approved make LAN

19 cable of following size in existing pipe as per

[C] CAT - 6 Mtr

[D] CAT - 6 e Mtr

Providing & erecting main Distribution (MDF)

20 indoor type, back mounted frame as per DoT

standard approved with krone strips

(a) Suitable for 10 pair Ea.

(b) Suitable for 20 pair Ea.

(c) Suitable for 50 pair Ea.

(d) Suitable for 100 pair Ea.

(e) Suitable for 200 pair Ea.

Providing & Erecting 6 core fibre optic SM

21 9/125um double sheath, CSTA, Unitube, Rmtr.

Outdoor cable (per m)

Providing & Erecting following Shock proof tissino

type accessories erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/ Metal/Wooden Box.

erected on wall/ ceiling.

(2) One no 3/5 pin 6 A Socket Ea.

(3) One no Single pole 16 A Switch Ea.

(4) One no 6/16 A Universal Socket Ea.

(10) Jack type tissino Telephone outlet Ea.

(11) Tissino type Neon ‘Indicator Lamp’ Ea.

(12) Tissino type TV antenna socket Ea.

(13) Tissino type 10A/16A Kitkat fuse Ea.

(14) Electronic Hum free EME Socket Type Steps Ea.

Providing & erecting Switch board for Computer or

electric apparatus consisting of following items in

single board erected on PVC / Metal / Wooden board

concealed / open with 3 mm thick PC

23 (Polycarbonate) / Acrylic sheet erected as directed

1 no. 6A/16A universal plug-switch combined. 3 nos.

6A Switch 3 nos. 6A 5 pin Plug

For Tissino Type Accessories Ea.

Providing & erecting Switch board for Computer or

electric apparatus consisting of following modular

type accessories mounted with PVC/ Metallic

concealed/ open box with single mounting base

24 frame covered with textured/ metallic/ white front

plate, modules erected with necessary connections

as directed 1 no. 6A/16A universal plug-switch

combined. 3 nos. 6A Switch 3 nos. 6A 5 pin Plug

For Modular Type Accessories

Hanging bed switch / Bell push 5A erected on existing Ea.

26 Providing & erecting ISI marked 3 pin plug top.

(a) for 5/6 A., 240 V Ea.

(b) for 15/16A, 240 V Ea.

Supplying & erecting Approved make call bell

indicator with buzzing sound and Red light

indicating lamp with Red light button to attend the

call suitable for 240 v 50 c/s supply to be

28 Call bell / Buzzer,250 volts, complete erected. Ea.

Call bell gong type suitable for 230 volts, 50 c/s. Ea.

29 AC supply complete Erected

Decorative call bell Ting-tong box type 250 volts Ea.

complete erected

Supplying & erecting Electronic Type Cordless Call

Bell erected on PVC/Metal board having portable

31 bell push working on D.C. & bell on 230V A.C. Ea.

supply with cells / battery

Providing & erecting insulated socket 3P+N+E with Ea.

32 Plug16A rating which is comprised of Four pole MCB

slot and insulated socket IP40 cat-III

Providing & erecting insulated socket 3P+N+E with Ea.

Plug 32A rating which is comprised of Four pole

MCB slot and insulated socket IP40 cat-III

Approved make High pressure sodium vapour

34 lamp, Tubular/Elliptical type 70W. 230/240/250V.

erected, if required.

Approved make High pressure sodium vapour

35 lamp, Tubular/Elliptical type 150W, 230/240/250V,

erected , if required

Approved make High pressure sodium vapour

36 lamp, Tubular/Elliptical type 250W, 230/240/250V,

erected , if required

Approved make High pressure sodium vapour

37 lamp, Tubular/Elliptical type 400W,

230/240/250V, erected , if required

Erection & connection charges for 16A / 32 A DP

(a) on existing wooden block / A.I. frame Ea.

(b) on polished wooden block. Ea.

(c) on angle iron frame duly painted with Red Ea.

Providing Approved make Triple Pole Cast Iron

39 Clad Switch & rewirable Fuse with neutral link

415/500 V confirming to IS

Erection & connection Charges For 16A/32A TP

(a) on existing wooden block / A.I.frame Ea.

(b) on polished wooden block. Ea.

(c) on angle iron frame duly painted with Red Ea.

Providing Approved make Triple Pole Metal / Iron

42 Clad Switch & Fuse with neutral link 415/500

V confirming to IS

Erection & connection Charges for 63A/100A TP

(a) on existing wooden block / A.I.frame Ea.

(b) Erection on angle iron frame duly painted with Ea.

Providing Approved make Triple Pole Metal Clad

Switch Fuse Unit 415/500 V. with HRC fuse of

suitable load and neutral link confirming to IS.

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V, having normal

current rating up to 25 A to 100A. with Fixed thermal

& magnetic release suitable to work on A.C. supply

50 c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S.

housing. Cat-III

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having normal

current rating 125A with Fixed thermal & magnetic

46 release suitable to work on A.C.supply 50 c/s. with all Ea.

internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing.

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having Normal

current rating 200A. with variable Thermal & magnetic

47 release suitable to work on A.C.supply 50 c/s. with all Ea.

internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S.housing

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 35 KA. and above at 415 V . having

normal current rating 250A. with variable thermal &

48 magnetic release suitable to work on A.C.supply 50 Ea.

c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S.

providing and erecting Miniature circuit breaker single

pole 6A to 25A suitable to operate on 240 V

49 A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

Providing & erecting 240 V MCB double pole

switch for motor & inductive load (C Curve)

50 having 10 KA breaking capacity & confirms to IS

: 8828 in existing box having following

(A) 6 to 32 Amp.

Providing & erecting 415 V MCB Four Pole for Motor

& Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity

(a) 6 to 32 Amp.

Providing & erecting 415 V MCB three Pole for Motor

& Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity

(a) 6 to 32 Amp.

Providing and erecting Sheet Steel powder

coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1 & 3, IEC

53 61439-1 & 3 without MCB to house appropriate nos.

of MCBs. (The DBs should be used of same

company of MCB to be used) suitable for

(A) single phase incoming and horizontal single

(b) sheet steel double door (IP-43)

(B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type

(b) sheet steel double door

Providing and erecting Sheet Steel powder

coated Vertical MCB distribution board (VTPN) - flush

/ surface mounted double door (IP54) fitted with

insulated copper busbar, isolated neutral link, earth

bar and DIN rail, confirming to IS 13032 and BS 5486-

1986,IP-54 suitable for 63/100 AMP TPN MCCB +

RCCB as incomer and three phase outgoing as per

following .(The DBs should be used of same

company of MCB to be used)

(A)4 way outgoing Ea.

(B)6 way outgoing Ea.

(C)8 way outgoing Ea.

(D)12 way outgoing Ea.

Providing and erecting Sheet Steel powder

coated Vertical MCB distribution board (VTPN) flush /

surface mounted double door (IP54) fitted with

copper insulated busbar, isolated neutral bar, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

55 61439-1 & 3, suitable for 250 AMP TPN MCCB +

RCCB as incomer and three phase outgoing as

per following. (The DBs should be used of same

company of MCB to be used)

(A)4 way outgoing Ea.

(B)6 way outgoing Ea.

(C)8 way outgoing Ea.

(D)12 way outgoing Ea.

providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase 240 V,

56 50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating

erected as directed

(ii) 40Amps. DP

(iii) 63 Amps. DP

Providing and erecting Approved make RCCBs

conforming to IS:12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on 3 phase and neutral

57 415V, 50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate

any electronic component for following Max. rating

erected as directed.

(ii) 40Amps. FP

(iii) 63 Amps. FP

(iv) 100 Amps. FP (100 mA Sensitivity)

Providing and erecting busbar chamber

confirming to IS-375 fabricated from 16 G.M.S. sheet,

dust & vermin proof having hinged door with rubber

gasket and necessary busbar supports with

COPPER busbar having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section

58 area) duly wrapped with colour insulation tape for

phase sequence, three phase & neutral each

suitable for following current capacity with

necessary painting mounted on wall or pedestal

frame of required size with necessary connections.

(A) Suitable for 63/100 Amp. capacity Rn.Mtr

Providing and erecting required size HOT deep

Galvanised iron strip for earthing of H.T. , OCB/ ACB/

59 Transformer LT panel board, Motors etc. using proper Kg.

Providing and erecting required size Copper strip

for earthing of H.T. OCB / ACB/

60 Transformer, LT panel board, Motors etc. using Kg.

Providing and erecting Annealed bare Copper wire

Providing and erecting HOT deep Galvanised iron

62 strip wire 8 to 16 SWG. Kg.

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I. Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by

highly conductive compound with high charge

dissipation suitable for following type of applications

63 with chamber and heavy duty cover. (approved make

OEM has to submit test certificate) & having back

filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 / meter testing as per

IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill

Compound:- Earthing compound should be

capable to retain moisture for long time

Necessary test report must be submitted.

(a) For Electrical Installation up to 440V in

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

(b)For Electrical installation up to 11 KV in

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg.

(c) For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System (like Automation,

SCADA) i.e independent Earthing in normal soil. Ea.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Supplying & erecting in earthpit of minimum bore

dia. 225mm size approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 80 mm

having 80-200 Micron galvanising, Inner pipe dia of

40 mm having 200-250 Micron galvanising,

65 connection terminal dia of 14 mm with constant

ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and

heavy duty cover.(approved make OEM has to

submit test certificate including value of earth

resistane of installation.

[A] For electrical installation up to 440 V Length of

Back filling compound - 1 Nos. of Bag of

[B] For Electrical installation up to 11 KV

located in other than normal soil i.e. Soft Rock,

Marshy Soil etc. Ea.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg.

[C] For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System (like Automation,

SCADA) i.e. independent Earthing located in other

than normal soil i.e. Soft Rock, Marshy Soil etc.. Ea.

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Supplying & erecting funnel type earthing

having earth plate of following size burred in

specifically prepared earth pit 3 mtr. below ground

with 40 kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel with

a wire mesh for watering & bricks masonry block, C.I.

Cover complete as per para 7.3 of IS 3043 with

64 necessary length of double Galvanised Iron / copper

earth wire No 6 SWG bolted with lug to the plate and

covered in 12 mm dia. G.I. pipe 2.5 mtr long complete

connected to the nearest switch gear with end socket

as per direction & duly tested by earth tester

confirming to IS (As per drawing) with following

(A) With 30 x 30 x 0.35 cms: C.I. earth plate Ea.

Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink

shall be made of co- extruded polycarbonate

channel with diffuser part in needed opal finish with

company mark/name 160V to 270V, Power Factor

more than 0.9, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy > 85 lumens/watt,LED LED driver

65 efficiency > 85 % (fitting required LM-79 & LM-80

Certificates) (NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to

(ii) 18-20 Watts, Surge - 2KV, IP-20, conventional

Supplying and erecting led lamps with following

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500V in built-surge

66 protection, Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser

suitable LAMP holder

(i) 2 to 3 watts

(ii) 5 to 8 watts

(iii) 10 to 15 watts

(iv) 16 to 20 watts

(v) 21 to 30 watts

Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to

IS:513/CRCA/ aluminium pressure die cast powder

coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with

company mark/name 160V to 270V, Power Factor

more than 0.9, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens / watt, LED driver

efficiency > 85% ( fitting required LM-79 & LM-80

Certificates) (NOTE:Below description have shown

ranges of Wattage capacity of LED fittings. The

Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Square/ Circular shaped Surface / Recessed

Mount Downlight with provision for spring loaded

mounting clips complete.IP20

(i) 5-9 watts,Surge-2 KV

(ii) 11-15 watts, Surge-2 KV

(iii) 16-20 watts, Surge-2 KV

(iv) 22-24 watts, Surge-2 KV

(B) LED Panel Light with provision for Plane front

frame with translucent cover fixed to housing

(i)up to 8 Watts,4" x 4", Surge-2 KV

(ii) 10 watts, 4" x 4", Surge-2 KV

(iii) 12-15 watts, 6" x 6", Surge-2 KV

(iv) 18 to 20 watts, 8" x 8", Surge- 2 KV

(v) 24 watts, 12" x 12" , Surge-2 KV

(vi) 36 watts, 24" x 24", Surge- 2KV

(vii) from 45 to 48 watts, 24" x 24", Surge-2 KV

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,

68 Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K, Uniformity ratio >0.45, Luminaire

efficacy >100 lumens/ watt LED driver efficiency >

85 %.( fittings required LM- 79 & LM-80 certificates)

(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings. The Engineer

incharge may select any wattage capacity

between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line

supply with over-voltage protection.

(i) above 36 to 47 watts

(ii) above 48 to 59 Watts

(iii) Above 60 to 89 watts

(iv) above 90 to 119 watts

(v)above 120 to 159 watts

(vi)above 160 to 199 watts

(vii)above 200 to 250 watts

(B) Flood Light(IP-65), Surge protection - 4KV integral

and Light must have 440VAC line supply with over-

voltage protection.

(i) above 36 to 47 watts

(ii) above 48 to 59 Watts

(iii) Above 60 to 89 watts

(iv) above 90 to 119 watts

(v) above 120 to 159 watts

(vi) above 160 to 199 watts

(vii) above 200 to 250 watts

(C)Post Top Lantern LED fitting comprises of finish

cast aluminum spigot and spun aluminum canopy

fixed with opal polycarbonate, pipe arrangement for

vertical mounting driver and accessories wired upto

terminal block. IP

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

69 unarmoured copper cable 1.1 KV grade to be

erected as directed of following size.

(A) 2 core 2.5 Sq. mm Mtr.

(B) 2 core 4 sq.mm Mtr.

(C) 2 core 6 Sq. mm Mtr.

(D) 2 core 10 Sq. mm Mtr.

(E) 3 core 2.5 Sq. mm Mtr.

(F) 3 core 4 Sq. mm Mtr.

(G) 3 core 6 Sq. mm Mtr.

(H) 3 core 10 Sq. mm Mtr.

(I) 3 core 16 Sq. mm Mtr.

(J) 4 core 2.5 Sq. mm Mtr.

(K) 4 core 4 Sq. mm Mtr.

(L) 4 core 6 Sq. mm Mtr.

(M) 4 core 10 Sq. mm Mtr.

(N) 4 core 16 Sq. mm Mtr.

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor

70 for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of

(A) 3 core 2.5 Sq. mm Mtr.

(B) 3 core 4 Sq. mm Mtr.

(C) 3 core 6 Sq. mm Mtr.

(D) 3 core 10 Sq. mm Mtr.

(E) 3 core 16 Sq. mm Mtr.

(F) 3 core 25 Sq. mm Mtr.

(G) 3 core 35 Sq. mm Mtr.

(H) 3 core 50 Sq. mm Mtr.

(I) 3 core 70 Sq. mm Mtr.

(J) 3 core 95 Sq. mm Mtr.

(K) 3 core 120 Sq. mm Mtr.

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

71 1.1 KV to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables

(A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 Mtr.

(B) 3 1/2 core 35 Sq. mm (16 Sq. mm 1/2 Mtr.

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm Mtr.

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 Mtr.

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 Mtr.

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 Mtr.

(G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core) Mtr.

(H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core) Mtr.

(I) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 Mtr.

(J) 3 1/2 core 300 Sq.mm ( 150 Sq. Mm 1/2 Mtr.

(K) 3 1/2 core 400 Sq.mm ( 185 Sq. mm 1/2 core) Mtr.

(L) 3 1/2 core 500 Sq.mm ( 240 Sq. mm 1/2 core) Mtr.

(M) 3 1/2 core 630 sq. mm (300 sq.mm 1/2 core) Mtr.

Providing & laying approved make Double

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

72 necessary connecting accessories of same material

at required depth in existing trench for laying of

cable. below ground / road surface for enclosing

(A)50 mm outer dia Mtr.

(B)63mm outer dia Mtr.

(C))90 mm outer dia Mtr.

(D)120 mm outer dia. Mtr.

Providing & laying approved make ISI marked Rigid

PVC pipe having 6Kg / cm2 (Class-3) to be erected

73 at road crossing on or floor as directed for laying of

cable. The pipes as following size of dia & weight

(A) 40 mm inner Dia. (1.68 Kg / 6 RMT) Mtr.

(B) 50 mm inner Dia. (2.5Kg/6RMT) Mtr.

(C) 63 mm inner Dia. (4 Kg / 6RMT) Mtr.

(D) 75 mm inner Dia. (5.5 Kg/6RMT) Mtr.

(E) 90 mm inner Dia (8.0 Kg / 6RMT) Mtr.

(F) 110 mm inner Dia. (11.63 Kg/6 RMT) Mtr.

Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber

74 ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following

size of cables.

(A) 3 & 1/2 / 4 core 25 Sq. mm Ea.

(B) 3 & 1/2 core 35/50 Sq. mm Ea.

(C) 3 & 1/2 core 70 Sq. mm Ea.

(D) 3 & 1/2 core 95 Sq. mm Ea.

(E) 3 & 1/2 core 120 Sq. mm Ea.

(F) 3 & 1/2 core 150 Sq. mm Ea.

(G) 3 & 1/2 core 185 Sq. mm Ea.

(H) 3 & 1/2 core 240 Sq. mm Ea.

(I) 3 & 1/2 core 300 Sq. mm Ea.

(J) 3 & 1/2 core 400 Sq. mm Ea.

(K) 3 & 1/2 core 500 Sq. mm Ea.

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

75 connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Disconnecting the cable connection and Providing

straight joint with PVC mould using heat shrink/cast

resin type epoxy compound Insulating material and

making the joint complete using necessary in

lineconnectors, hardener, earth continuity

connection, spacers etc. and reconnecting the

same & ensure the joint resistance within the limits

(A) up to 25 Sq mm Cable Ea.

(B) 35 to 95 Sq. mm cable. Ea.

(C) 120 to 300 Sq. mm cable. Ea.

Providing & erecting Approved make Ceiling Fan

with double ball bearing ISI mark with Condenser

230 volt A.C.50 Hz 1200 mm sweep complete

77 having 3 blades aluminium body and blade sets Ea.

having ornamental design shanks, canopy erected

with earthing. [ Make shall be approved by Engineer

Supplying & erecting fan hook box of 10 mm

M.S. round bar bounded to the RCC bars up to 50mm

length each side and pierced through a 16 Gauge

78 M.S. box / Heavy Duty PVC box complete Ea.

erected concealed in Ceiling with necessary

Supplying & erecting approved make low noise

79 decorative exhaust fan having square frame ABS

body with inbuilt lowers & square frame.

200mm with 1350RPM Cat.II Ea.

250mm with 1350 RPM Cat.II Ea.

Supplying & erecting single phaseapproved make

industrial exhaust fan suitable for medium duty ring

80 mounted low noise operation suitable for medium

duty having following dia size and maximum speed

[A] 300-305 mm dia 900 RPM

[E] 450 mm dia 1400 RPM

Supplying and erecting approved make Bracket fan

of 230 volt, A.C. 50 Cy/s., 400/450 mm sweep

complete erected on wall or with lead Cores and

connections complete.

Supplying and erecting approved make double ball

bearing oscillating type Heavy duty bracket fan with

Aluminium Blades A.C. 23OV. 50cy/s wall mounted

with height adjustment and rotary tilting device

complete with guard, wall bracket, mounting

accessories as directed.

Supplying and erecting approved make pedestal fan

A.C. 230V. 50 Cy/s. 400 mm sweep oscillating

83 type and adjustable, height complete with guard

regulator, & standard lead flexible wires and plug top.

Supplying and erecting approved make

Pedestal Circulatory fan A.C. 230 V. 50 Cy/s.

84 mm sweep and adjustable height complete with

guard, & standard lead flexible wires and plug top.

Providing and erecting Approved make Ceiling fan

with double ball bearing ISI mark with condenser

A.C. 23OV 50 c/s 1200 mm. sweep complete,

85 canopy erected on existing hook or clamp with Ea.

earthing. [Make shall be approved by Engineer in

Supply, Installation, Testing and Commissioning of

suitable sweep, BEE 5 Star rated, Ceiling fan with

Brush Less Direct Current (BLDC) permanent ferrite

magnet Motor, class of insulation: B, Rust free 3 nos.

Aluminium blades, 2 nos. canopies, shackle kit with

earthing provision, copper winding, Power factor not <

0.9, Service Value (CMM/W) minimum 6.85, Air

delivery minimum 215 CMM, 350 RPM, 230v

(tolerance as per IS: 374-2019), THD < 10%, with

86 remote unit for Speed Control and all remaining

accessories including safety pin, nut bolts, washers,

temperature rise = 75 degree C (Max.), suitable for

140 to 285 Voltage and rectifier circuit with surge,

over current and overload protection, 50 Hz,

Single phase AC Supply, earthing etc. Complete as

required.[ Make shall be approved by Engineer in

(B) 1200 mm Sweep (48") Ea.

Supply, Installation, Testing and

Commissioning of suitable sweep, BEE 5 Star

rated, Ceiling fan with Brush Less Direct

Current (BLDC) permanent ferrite magnet

Motor, class of insulation: B, Rust free 3 nos.

Aluminium blades, 2 nos. canopies, shackle

kit with earthing provision, copper winding,

Power factor not < 0.9, Service Value (CMM/W)

minimum 6.85, Air delivery minimum 215 CMM,

RPM,230v (tolerance as per IS:374-2019), THD <

10%, compitible with electronic regulator unit for

87 Speed Control and all remaining accessories Ea.

including safety pin, nut bolts, washers,

temperature rise = 75 degree C (Max.),

suitable for 140 to 285 Voltage and rectifier

circuit with surge, over current and overload

protection , 50 Hz, Single phase AC Supply,

earthing etc. Complete as required.[ Make shall be

approved by Engineer in Charge] (A) 1200 mm

Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation without

leakage and earthing.

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

89 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of

following size of cables.

(A) 4 core 2.5 Sq. mm Mtr

(B) 4 core 4 Sq. mm Mtr

(C) 4 core 6 Sq. mm Mtr

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of

following size of cables.

(A) 4 core 10 Sq. mm Mtr

(B) 4 core 16 Sq. mm Mtr

(C) 4 core 25Sq. mm Mtr

Making trench in soft soil of suitable width of 90 cm

deep for laying cable or locating the fault all over the

91 run and back filling the same and making the surface Mtr.

as normal ground.

Making trench in Hard Murrum / Tar Road of suitable

width of 90 cm or required depth for laying any size

92 of cable or locating the fault all over the run and back Mtr.

filling the same and making the surface as normal

Disconnecting the cable connection and Providing

straight joint with PVC mould using heat shrink /cast

resin type epoxy compound Insulating material and

making the joint complete using necessary in line

93 connectors, hardener, earth continuity connection,

spacers etc. and reconnecting the same & ensure the

joint resistance within the limits as per IS.

(A) up to 25 Sq mm Cable Ea.

(B) 35 to 95 Sq. mm cable. Ea.

(C) 120 to 300 Sq. mm cable. Ea.

Supplying and erecting Direct - On - Line Starter with

18 A. rating contactor and with 3.5 Amp. 18A range

directly operated in totally insulated elegant enclosure

94 for single phase operation up to 3 HP as per IS

complete erected on P.W. Block with necessary

Supplying and erecting Direct-on-line, Starter with

15A.rating contractor and with 4-14A. range, directly

operated thermal overload relay in sheet steel

95 enclosure for 3phase 415V.50 c/s. A.C. motor up to

7.5 H.P.complete erected on P.W. Block with

necessary connection.

Supplying and erecting push button operated fully

automatic Star-Delta starter with 3 Nos.of 32A. rating

contactors and. 1 No. of directly operated thermal

96 overload relay having 20-32A range in sheet steel

enclosure for 3 phase 415V. 50 c/s. A.C. motors up to

35 H.P. complete erected on

(B) For erection on Angle iron frame add to

Supplying & erecting approved make self-priming

domestic monoblock water pump with 0.5 H.P. motor,

suitable for operation on 230 volts 50 c/s. AC supply

with metallic flange, delivery and discharge of 32 LPM

at 10 mtrs.head.

Supplying & erecting approved make self-priming

domestic monoblock water pump with 1 H.P motor,

suitable for operation on 230 volts, 50c/s. AC supply

with metallic flange, and M.S. impeller delivery and

following discharge

(a) 40 LPM at 24 mtrs. head suitable for 25mm dia.

Delivery- Cat.III

(b) 100 LPM at 14 mtrs. head suitable for 25 mm dia.

delivery - Cat.III

Providing & erecting open well type horizontal mono

99 block pump set with stainless steel body having

following specification

(C) 1 H.P. single phase open well motor pump set

suitable for 185 LPM discharge @ 25 mtr. head,

suitable for 32 mm dia. Delivery pipe with control

Providing & erecting open well horizontal mono block

100 pump set with cast iron body, complete for three

phase submersible motor having

[C] For 3 HP 3 phase open well horizontal mono block

pump set suitable for 85 LPM to 270 LPM @ 11 mtr

to 33 mtr head suitable for 50/65 mm dia delivery pipe

[D] For 5 HP 3 phase open well horizontal mono block

pump set suitable for 1350 LPM to 310 LPM @ 10 to

42 Mtr head suitable for 50/65 mm dia delivery pipe

[E] For 7.5 HP 3 phase open well horizontal mono

block pump set suitable for 1550 LPM to 370 LPM @

13.5 Mtr to 42 Mtr head suitable for 65/75 mm dia

[F] For 10 HP 3 phase open well horizontal mono

block pump set suitable for 1725 LPM to 940 LPM @

15 to 36 MTR head suitable for 65/80 mm dia delivery

[G] For 12.5 HP 3 phase open well horizontal mono

block pump set suitable for 1530 LPM to 950 LPM @

24 to 40 MTR head suitable for 65/80 mm dia

[H] For 15 HP 3 phase open well horizontal mono

block pump set suitable for 1600 LPM to 1025 LPM

@ 33 to 42 MTR head suitable for 65 /80 mm dia

Supplying & erecting approved make Automatic liquid

level controller 6A. with sensor testing as per

instruction of Engineer in charge on site complete

with wiring connection with existing wires , with

copper conductor from pump to upper and lower tank.

Supplying & erecting approved make motor control

cubical panel (Direct - on - line) made from 16 G.

CRCA sheet duly epoxy powder painted inside and

outside with hinged doors and locking, arrangement

consisting of suitable size of ON- OFF isolator (AC -

3/23duty) main fuses, single phasing preventer,

indicating lamps for R- Y - B phases, overload relay,

102 Automatic water level controller, Ammeter, Voltmeter

each with two way selector switch incoming, wires

duly socket crimped, main contactor & overload relay,

start - stop push buttons, to be erected on angle iron

frame grouted on wall as directed. The isolator,

overload relay & contactors will be of L & T, Siemens

or BCH make only.

(a) DOL up to 5.0 H.P. Ea.

(b) DOL for 7.5 H.P. Ea.

Supplying & erecting approved make 3 phase motor

control cubical panel ( Star - Delta) made from16 G.

CRCA sheet duly painted with epoxy powder painted

inside and outside with hinged doors and locking

arrangement, consisting of suitable size of ON- OFF

isolator (AC - 3/23 duty) main fuses, single phasing

preventer cum water level. Guard (Complete unit),

Toggle switch to by pass Single phase preventer cum

WLG, indicating lamps for R- Y- B phases, over load

relay, Automatic water level controller, Ammeter &

Voltmeter each with two way selector switch incoming

103 wires duly socket Crimped, Panel to be erected on

angle iron frame grouted on wall as directed. Star

Delta & main contactor, overload relay, thermal /

Electronic Star delta cutoff timer, start - stop push

buttons. The isolator overload relay & contactors of

L& T, Siemens or Cuttler Hamer make only. Panel to

be erected on angle iron frame ground on wall.

Providing and erecting ISI marked PVC insulated

104 PVC Sheathed Flat flexible Submersible copper cable

approved make of following Size.

(a) 3 Core x 1.5 Sq. mm. Mtr.

(b) 3 Core x 2.5 Sq. mm. Mtr.

(c) 3 Core x 4 Sq. mm Mtr.

(d) 3 Core x 6 Sq. mm. Mtr.

(e) 3 Core x 10 Sq. mm. Mtr.

(f) 3 Core x 16 Sq. mm. Mtr.

(g)3 Core x 25 Sq. mm Mtr.

Removing the pump set from foundation after

removing suction & discharge connection pipes & all

wiring connections taking it to workshop & open it for

fault finding , refitting the same, after carrying out

105 repairing, taking back on site refitting on foundation

with pipe & wiring connections & put in working

condition. (Excludes cost of repairing. Includes to &

from transportation)

(a) Up to 3 HP Job

(b) Above 3 HP to 7.5 HP Job

(c) 10 Hp to 20 HP Job

Removing deteriorated gasket, gland packing, washer

106 nuts & bolts before refitting of motor pump set.

(b) Above 3 HP to 7.5 HP Ea

Rewinding of 230V single phase motor as per original

winding design by using super enamelled copper

107 Wire and putting the same in working condition as per

(B) Upton 0.75 HP Ea

(C) Upton 1.0 HP Ea

Rewinding of 3 phase 440V motor as per original

winding design by using super enamelled copper

108 Wire and putting the same in working condition as per

Rewinding of 5 H.P., 3 phase 440V motor as per

original winding design by using super enamelled

copper Wire and putting the same in working

condition as per original.

Rewinding of 7.5 H.P., 3 phase 440V motor as per

original winding design by using super enamelled

110 copper Wire and putting the same in working Ea

condition as per original.

Rewinding of 10 H.P., 3 phase 440V motor as per

original winding design by using super enamelled

copper Wire and putting the same in working

condition as per original.

Rewinding single phase 230V motor for open well

horizontal mono pump set by using polycab copper

112 winding wire & putting the same in working order for

pump capacity of

Shifting of Split A.C. The Scope includes dismantling,

shifting, re-installing & re-commissioning of the units

including topping up of Refrigerant gas, minor civil

116 work wiring existing piping M S Stand electrical Ea

cabling with PVC drown piping for 1.00, 1.5 & 2.0 TR

Overhauling and servicing the Split type

A.C.MACHINES by Chemical cleaning of the

117 condenser, cooling coil etc. by veniclean /Eq. job

material, water & cleaning all necessary parts and

putting the machine in working order.

Providing and erecting approved make split

airconditioning unit consisting of copper condensing

unit with fan motor, hermetically sealed rotary

compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor

with its accessories by means of extra supplied

proper insulated copper tubing,drain PVC pipes

suitable for (cost includes powder coated Stand, Eco

Friendly green gas charging, 15A plug top & Remote

Control) with necessary core cutting.Premium Cat:O-

Genral,Mitsubishi Electric

(1)For ISEER range(KWH/KWH)(3.1 to 3.9)

(B) for 1 ton capacity Nos.

(C) for 1.5 ton capacity Nos.

(D) for 2 ton capacity Nos.

Supplying & installing MS standard type stand

mounting for outdoor unit of Split A.C. upto 4 TR

capacity erected with necessary hardware materials

Providing and erecting water cooler having storage

capacity 80Ltr. & cooling capacity 40 Ltr.per hour @

an ambient temp of 45˚ C.The outlet temp of the

water should drop by 15˚ C within a hour, The water

cooler should be comprising of hermetically sealed

120 compressor, fan motor, condensing unit, water tank Nos.

surrounded by evaporating coil, thermostats, relay

etc. complete with necessary inlet & outlet

connection. The body of water cooler will be made

from Stainless Steel.

Providing & erecting water cooler having storage

capacity 150 Ltr. & cooling capacity 150 Ltr per hour

@ an ambient temp of 45˚ C. The outlet temp. of the

water should drop by 15˚C within a hour, The water

cooler should be comprising of hermetically sealed

121 compressor, fan motor, condensing unit, water tank Nos.

surrounded by evaporating, coil, thermostats, relay

etc. complete with necessary inlet & outlet

connection. The body of water cooler will be made

from Stainless Steel.

Supplying and erecting water filter cum purifier with

ultra violate technology. (Aquaguard /waterdoc model

122 or equivalent symphony/ crystal/videocon model) Nos.

Supplying approved make domestic refrigerator of

123 50/60 Ltr storage capacity, single phase minimum 3 Nos.

Supplying approved make domestic refrigerator of

124 165 Ltr to 185 Ltr storage capacity, single phase Nos.

minimum 3 star rating.

carry out RCC Core cutting- up to 100 mm dia.

/200mm thick Wall/beam/slab with providing PVC

125 pipe of 3 mm thick inside and necessary finishing on Job

both ends of wall .

carry out RCC Core cutting- up to 100 mm

dia./300mm thick Wall/beam/slab with

126 providing PVC pipe of 3 mm thick inside and Job

necessary finishing on both ends of wall .

SITC of CAT6 UTP 23AWG Solid: Per Meter

127 (approved by competent authority i.e. not belowthe Ea.

rank of executive engg.

SITC of Patch Panel Cat 6 UTP Keystone Type-

128 Port-Fully Loaded (approved by competent authority Ea.

i.e. not belowthe rank of executive engg.

Providing Membrane 40 x 40 size for 100 to 250 Ltr.

Industrial R.O. Plant

Providing Row Water Pump of 0.5 H.P.

operating on 230V A.C. ,50 Hz supply &

Putting the same in working condition for 100 to

Ltr. Industrial R.O. Plant

Providing Vessel Service , Sand & Carbom media

131 and multi port valve multimedia material for 100 to Job

250 Ltr. Industrial R.O. Plant

Providing Erecting auto R.O. work new panel board

132 for 100 to 250 Ltr. Industrial R.O. Plant Job

Repairing high pressure pump upto 1 H.P.

133 operating on 230V A.C., 50 Hz supply, winding & Job

Bearing100 to 250 Ltr. Industrial R.O. Plant

Repairing solenoid valve and replacing coil 100 to

250 Ltr. Industrial R.O. Plant

Providing and Erecting 20" wound and spun Cartridge

135 100 to 250 Ltr. Industrial R.O. Plant Job

Providing & Erecting Hardware Material (elbow, pipe,

136 union etc.) 100 to 250 Ltr. Job

Industrial R.O. Plant

Repairing and servicing labour charges for 100 to

Ltr. R.O. System

138 Supply and Installation of New 100 Ltr. R.O. Plant Nos.

Dismantling charge for Split A.C. Machine (upto

Shifting (Transportation) charges for watercooler /

Supply M.S. Bottom stand for up to 80 litre storage

141 capacity water cooler Nos.

Supply M.S. Bottom stand for Above 80 litre to

litre storage capacity water cooler

Supplying and erecting insulated pair of soft copper

tubing open or concealed including power and control

143 cable,necessary PVC drain pipes for Split/Cassette Rmt.

AC machine up to 4 TR capacity

Plywood of 12 mm supply & Installation for Split A.C.

144 Machine IDU for any size Nos.

Zari work for copper piping & cabling with zari puran

145 using POP/White cement (including material) Ft.

146 Dismentling Work of Water cooler Nos.

147 Reinstallation Work of Water cooler Nos.

148 Dismentling Work of Water purifier Nos.

149 Reinstallation Work of Water puirfier Nos.

Condensor Replacement with copper condenser of

150 1.5 TR A.C. Machine with pressure testing & gas Job

Condensor Replacement with copper condenser of

151 2.0 TR A.C. Machine with pressure testing & gas Job

Condensor Replacement of watercooler with pressure

152 testing & gas charging Job

New Remote for Split Ac

Electronic timer for Split/window Ac

Supply and Installation of UPVC pipe outlet

Connections from Water Cooler with UPVC Pipe & all

155 accessories (Tee, Elbow, Union, Cock etc.) fixing with Job

clamp (a)upto 10 ft.

Supply and Installation of UPVC pipe outlet

Connections from Water Cooler with UPVC Pipe & all

accessories (Tee, Elbow,Union, Cock etc.) fixing with

clamp (b)upto 11 -20 ft.

157 Supply and installation of SS Tap for water cooler Nos

S.I.T.C. of Booster pump for water purifier

S.I.T.C. of New water level sensor for water purifier

160 S.I.T.C. of Bowl filter set for water purifier Nos

S.I.T.C. of new minimum 3 star outdoor unit of spilt ac

161 for ISEER Range (kWH/KWH)(3.1 to 3.9)New Nos

outdoor unit of Split ac

S.I.T.C. of new minimum 3 star indoor unit of spilt ac

162 for ISEER Range (kWH/KWH)(3.1 to 3.9)New Nos

outdoor unit of Split ac

163 Cable Laying in Kachha ( per mt. length) Mtr

164 Cable Laying in Pakka ( per mt. length) Mtr

Supply & Labour charges for Modification work of

relocation of JB upto 1.2 mtr from bottom. Scope of

work :- Hole drilling and fixing of JB with Loop In Loop

Out cable in GI / DWC / UPVC pipe (Rate extra for

pipe) with connection of fixtures and earthing wire

Decorative Post Top light fixtures - SITC of decorative

Post top lantern type Light Fixture with die cast

aluminum body and PC protector indirect type for

lighting distribution suitable for max. 45 Watt LED

lamp of low glare with minimum IP66 protection for

optical compartment of light fixture, Minimum IK

Having luminous Efficasy >= 80 lumens / watt at

colour temperature 3000/ 4000 K, CRI >70, with

mtr long 3 core FRLS cable,CRI >80,with surge

protection device of 10/10KV, Driver non integral

Type, with EPDM/Silicon rubber gasket with all

necessary Hadware, Internal Wiring with Lamp,

integral Ballast etc. complete in all respect with all

required accessories as per the detailed technical

specifications. Lighti fixtute to be provided with cross

holes with fixing allen KEY to be matched with

Existing Pole hole and if not Contractor Has to make

Hole as per LIght Fixture. Colour of light fixture should

be MRF anchor gray shade no 624 or as approved

SRFDCL. Make:- (Lighting Technologies / Keselec/ K-

Lite / Philips / Crompton / Bajaj /Ensave / Acon )

Decorative Post Top light fixtures - SITC of decorative

Post top lantern type Light Fixture with die cast

aluminum body and PC protector Direct type for

lighting distribution suitable for max. 45 Watt LED

lamp of low glare with minimum IP66 protection for

optical compartment of light fixture, Minimum IK

Having luminous Efficasy >= 80 lumens / watt at

colour temperature 3000/ 4000 K, CRI >70, with

mtr long 3 core FRLS cable,CRI >80,with surge

protection device of 10/10KV, Driver non integral

Type, with EPDM / Silicon rubber gasket with all

necessary Hadware, Internal Wiring with Lamp,

167 integral Ballast etc. complete in all respect with all No.

required accessories as per the detailed technical

specifications. Lighti fixtute to be provided with cross

holes with fixing allen KEY to be matched with

Existing Pole hole and if not Contractor Has to make

Hole as per LIght Fixture. Colour of light fixture should

be MRF anchor gray shade no 624 or as approved

SRFDCL. Make:- (Lighting Technologies /Keselec / K-

Lite /Philips/Crompton/Bajaj/Ensave/Acon )

For providing Wiremen at various premises of

168 SRFDCL (8 hrs. shift) Each

For Providing Wiremen Helper at various premises of

169 SRFDCL Each

170 630 Amp Spreader Terminals Ea

170 630 Amp Rotary Handle Ea

172 630 Amp Shunt Trip Ea

173 ELR With CBCT(for 630 amp FF MCCB) Ea

174 400A Spreader Terminals Ea

175 400A Rotary Handle Ea

176 400A Shunt Trip Ea

177 ELR With CBCT(for 400 amp FF MCCB) Ea

178 95 sq.mm. Cu Flexible Wire mtr

179 70 sq.mm. Cu Flexible Wire mtr

180 50 sq.mm. Cu Flexible Wire mtr

181 35 sq.mm. Cu Flexible Wire mtr

182 25 sq.mm. Cu Flexible Wire mtr

183 10 sq.mm. Cu Flexible Wire mtr

184 6 sq.mm. Cu Flexible Wire mtr

185 4 sq.mm. Cu Flexible Wire mtr

186 2.5 Sqmm lead wire Mtr

187 1.5 Sqmm lead Wire Mtr

188 1.5/2.5 sqmm Cu Lugs Ea

189 Sintex Junction Box 40x30 Ea

190 Sintex Junction Box 28x17 Ea

191 Sintex Junction Box 25x25 Ea

192 MCB Channel Mtr

193 (R-Y-B) LED Lamp Ea

194 B LED Lamp Ea

195 ELR With CBCT Ea

196 100A Spreader Terminals Ea

197 100A Rotary Handle Ea

198 100A Shunt Release Ea

wooden Computer Borad (4+4 no 15 amp switch and

199 15 amp socket with 10 mtr 2.5 sq mm 3 core cable Ea

with 15 amp top)

200 Lamp Holder Ea

201 5 mm Hylem Sheet mtr

202 100 mm Exhuast fan Ea

203 150 mm Exhaust fan Ea

204 200 mm Exhaust Fan Ea

205 250 mm Exhuast fan Ea

206 12 Moduler PVC Board Ea

207 6 modular PVC Board Ea

Supplying & Installing approved make air cooler

(desert cooler) 230Volts, having brass nuts-bolts, with

fan, pump, drip proof motor, filter pads, confirming to

208 IS-3315,separate control switch for pump & fan

complete with 5 mtrs. long 3core flexible copper Core

and top erected on suitable stand with following air

displacement capacity.

(B) With FRP (moulded fiber) body

(iii) 85 cu. mtrs / minute

(C)with ABS plastic body

(ii) 3000 cu. mtrs Hr.

Supplying & Installing approved make air cooler, All

plastic body injection molding made of 100% virgin

Poly propylene high impact resistance material, motor

should be 3 speed aluminum body with copper

winding with 950RPM/220Volts/50HZ, should be "P2"

type, cooling media should be 4 inch cellulose pad

209 with maximum 5 mm flute, all hardware SS

Power cord and 3 Pin molded plug top, should be ball

valve for automatic water refilling, should have water

drainage system, should have complete cover for air

cooler to protect when unused.

(A) motor 175W, fan 21-inch, sound maximum 63db,

air delivery 6000 CMH, can cover 900 square feet,

tank 60 Liters, cooling pad size 770x100x700 mm.

(B) motor 490W, fan should be one piece aluminum

pressure die cast 30" with air delivery 18000 CMH,

can cover 2500 square feet, sound maximum 67db, Ea.

tank 90 Liters, cooling pad size 1100x100x1150 mm.

Supply & Fixing Of 50W led Driver with input voltage

Ac 90-310v,5060Hz,output voltage Dc 50-75V,Output

current 750mA +-5% complete with

coonections,testing and commissioning

Supplying & erecting approved make time switch with

single pole air break contacts suitable for

V.15/16A.complete with self starting motor driven

clock ‘ON’ &’ OFF’ automatic arrangement at any

predetermined time during each 24 hours,With nickel

cadmium rechargeable battery backup erected as

Supplying & erecting approved make Digital time

switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching

setup time 1 minimum & LCD display. Also comprised

212 permanent ON/OFF switching. Programming Ea.

switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as required

with necessary connection erected as directed.

Supplying and erecting approved make Segment time

switch suitable for 230V+10%16A. floating contacts

with 24 hour dial having15/30 min. segments with

early manual override switching for on & off without

influencing the program sequence with quartz time

213 switch With power reserve, housed in fire proof Ea.

thermoplastic enclosure & transparent cover terminal

covers erected as required wire necessary

connection erected as directed.

Providing and erecting approved make light control

unit suitable to operate on 230V +20% having

ON/OFF delay time of 30-50 seconds and having

214 facility for Auto/manual system having two LDR lens Ea.

to intensity light having capacity of 5A complete

erected on section pillar with pipe and stand.

Supplying & erecting power contactor ,AC3 duty for

215 time switch complete erected as per direction Cat III

(A) 2 Pole 250V 12 Amp. Ea

(B) 2 pole 250V 32 Amp. Ea

(C) 4 pole 440V 16 Amp. Ea

(D) 4 pole 440V 40 Amp. Ea

Supplying & erecting approved make IP 55 grade

Company fabricated Timer Panel of following capacity

for switch On-Off street lights on time scheduling

basis made from 16G CRCA sheet duly epoxy power

painted inside and outside with hinged doors and

locking arrangement consisting of suitable size of

providng and erecting Approved make energy meter

217 230V, 50 Hz AC up to 20A erected as directed with

three year replacement guarantee.

providng and erecting Approved make single phase

electronic energy meter rating 5A/20A/40A based on

218 ASIC (Application Specific integral circuit) digital

technology with accuracy Class-I, temper proof, free

from effect of external magnetic field with phase,

earth,IIIreverse and impulse indications, 6 digit electro-

providng and erecting Approved make energy meter

3 phase 4 wire unbalanced load rating, 10A to

Amp. based on ASIC(Application specific Integral

Circuits) digital technology with accuracy Class - 1

temper proof, free from effect of external magnetic

field with 3 phase indication, earth & impulse

Supplying & erecting D.C.P. type fire extinguisher for

219 following capacity cartridge type with gun metal cap

150 gram CO2 gas cartridge, powder and brackets

[A] For 5 KgtoCapacity

IS 2171 1985 and complete erected with

[B] For 10 KG Capacity Ea

Supplying & erecting carbon dioxide (CO2) fire

extinguisher user of following capacity with necessary

clamps made from 50 x 6 mm M.S. Flat with nut &

bolts grouted in wall complete.

[A] For 4.5 Kg Capacity Ea

[B] For 5.5 / 6.5 KG Capacity Ea

Supplying & erecting ABC powder type 'Ceasefire'

type Fire extinguisher as per IS 13849 or 1 Kg

221 capacity with necessary clamp for erection on wall Ea

222 Solder less crimping type Copper lugs conforming to

Sq.mmof following size evenly crimped Ea.

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 50 KA and above at 415 V having

Normal current rating 400A. with variable Thermal &

223 magnetic release suitable to work on A.C.supply

Hz. With all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S.

ICS=100% of ICU only Cat III Ea.

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 50 K.A. and above at 415 V having

normal current rating up to 630A. with variable

thermal & magnetic release suitable to work on

A.C.supply 50 Hz. with all internal connections,

ICS=100% of ICU only Cat III Ea.

Providing and erecting metallic vitrified danger notice

board as per language suggested by engineer

225 incharge for MEDIUM VOLTAGE installation to be Ea.

erected as per IS-2551.

Providing and erecting metallic vitrified danger notice

board as per language suggested by engineer

226 incharge for HIGH VOLTAGE installation to be Ea.

erected as per IS.-2551.

Providing & erecting Medium Voltage Danger Notice

Board sticker as per language suggested by engineer

227 incharge of standard size as per IS-2551 Ea

Providing & erecting High Voltage Danger Notice

Board sticker as per language suggested by engineer

228 incharge of standard size-as per IS 2551 Ea

Supply of Fiberglass Step (A Type) Ladder - 4 FT

having following specifications.

It should have nonconductive Structural moulded top,

with Slots to keep tools close at hand, inside

Spreader Braces, Aluminium Feet with thick rubber

tread, nonconductive Full channel Fibreglass and two

229 pairs of gusset support at the bottom step. All gussets Ea.

are heavy duty steel.

Capacity : 300 lbs.

Step Size : 3” Width : 19” “Approx. Spread :

Wt. :8 Kg Approx. Cube : 4.05’

Supply of Fibreglass Step (A Type) Ladder - 6 FT

having following specifications :

It should have nonconductive Structural moulded top,

with Slots to keep tools close at hand, inside

Spreader Braces, Aluminium Feet with thick rubber

tread, nonconductive Full channel Fibreglass and two

230 pairs of gusset support at the bottom step. All gussets Ea.

are heavy duty steel.

Capacity : 300 lbs. Step Size : 3” Width : 23”

Spread : 41” Approx.

Wt. : 11 Kg Approx. Cube : 6.2’

Supply of Fibreglass Step (A Type)Ladder-8 FT

having following specifications :

It should have nonconductive Structural moulded top,

with Slots to keep tools close at hand, inside

Spreader Braces, Aluminium Feet with thick rubber

tread, nonconductive Full channel Fibreglass and two

231 pairs of gusset support at the bottom step. All gussets Ea.

are heavy duty steel.

Capacity : 300 lbs. Step Size : 3”

Width : 26” Approx. Spread : 54” Approx. Wt. : 15 Kg

Supply of Fibreglass Step (A Type) Ladder - 10 FT

having following specifications :

It should have nonconductive Structural moulded top,

with Slots to keep tools close at hand, inside

Spreader Braces, Aluminium Feet with thick rubber

tread, nonconductive Full channel Fibreglass, two

232 pairs of gusset support at the bottom step and All Ea.

gussets are heavy duty steel.

Capacity : 300 lbs. Step Size : 3” Width : 29”

Approx. Spread : 66”Approx. Wt. : 19 Kg Approx.

Supply of Fibreglass Step Trestle (A Type) Ladder -

6 FT having following specifications :

It should have heavy gauge steel hinges suitable for

industrial application ,inside Spreader Braces,

Aluminium Feet with thick rubber tread,

nonconductive Full channel Fiberglass,two pairs of

233 gusset support at the bottom step and All gussets Ea.

are heavy duty steel. It should have steps on both the

sides for climbing. Capacity : 300 lbs." Step Width : 3”

Bottom Width:23” Approx.

Spread : 52”Approx.Wt.:13 Kg Approx. Cube :

Supply of Fibreglass Step Trestle (A Type) Ladder -

8 FT having following specifications :

It should have heavy gauge steel hinges suitable for

industrial application ,inside Spreader Braces,

Aluminium Feet with thick rubber tread,

nonconductive Full channel Fibreglass, two pairs of

234 gusset support at the bottom step and All gussets are Ea.

heavy duty steel. It should have steps on both the

sides for climbing. Capacity:300 lbs. Step Width:3”

Bottom Width : 26” Approx.

Spread : 67” “Approx. Wt. : 20 Kg Approx.

Supply of Fibreglass Step Trestle (A Type) Ladder -

10 FT having following specifications :

It should have heavy gauge steel hinges suitable for

industrial application ,inside Spreader Braces

,Aluminium Feet with thick rubber tread,

nonconductive Full channel Fibreglass ,two pairs of

235 gusset support at the bottom step and All Ea.

gussets are heavy duty steel. It should have steps on

both the sides for climbing. Capacity : 300 lbs." Step

Width : 4” Bottom Width : 29” Approx. Spread : 83”

Approx. Wt. : 27 Kg Approx. Cube : 13.44’

Supply of Fibreglass Platform Step (A Type) Ladder -

6 FT having following specifications :

It should have large fully serrated

platform 15” wide 20” deep which locks ladder

,Aluminium feet with thick rubber tread, top rail guard

236 to serve as a railing, two pairs of gusset support at Ea.

the bottom step and All gussets are heavy duty steel.

Capacity : 300 lbs. Step Width : 3’ Approx.

spread : 50” Width : 26.5” Approx. Wt. : 16 Kg

Approx. Cube : 8.15’"

Supply of Fibreglass Platform Step (A Type) Ladder -

8 FT having following specifications :

It should have large fully serrated

platform 15” wide 20” deep which locks ladder,

Aluminium feet with thick rubber tread, top rail guard

237 to serve as a railing, two pairs of gusset support at Ea.

the bottom step and All gussets are heavy duty steel.

Capacity : 300 lbs. Step Width : 3’ Approx.

spread : 62” Width : 29.5” Approx. Wt. : 22 Kg

Supply of Fibreglass Platform Step (A Type) Ladder -

10 FT having following specifications :

It should have large fully serrated

platform 15” wide 20” deep which locks ladder

Aluminium feet with thick rubber tread, top rail guard

238 to serve as a railing, two pairs of gusset support at Ea.

the bottom step and All gussets are heavy duty steel.

Capacity : 300 lbs. Step Width : 4’ Approx.

spread : 75” Width : 32” Approx. Wt. : 29 Kg

Supply of Fibreglass Platform Step (A Type) Ladder -

15 FT having following specifications :

It should have large fully serrated

platform 15” wide 20” deep which locks ladder

239 Aluminium feet with thick rubber tread, top rail guard Ea.

to serve as a railing, two pairs of gusset support at

the bottom step and All gussets are heavy duty steel.

Capacity : 300 lbs

Supply of Fibreglass Platform Step (A Type) Ladder -

18 FT having following specifications :

It should have large fully serrated

platform 15” wide 20” deep which locks ladder

240 Aluminium feet with thick rubber tread, top rail guard Ea.

to serve as a railing, two pairs of gusset support at

the bottom step and All gussets are heavy duty steel.

Capacity : 300 lbs.

Liaisoning work for additional load for requirement,

electrical power connection charges and inspector

241 approval for power(to be paid to concern electrical Job

power supplier company)

Liaisoning work for power supply procurement/To

resume the service in case of electrical break down

242 with site visit,Test report submission ,meter

conection,fualt,rectification in T.P/UGVSL and also all

Single site only one service connection Per

Single site more than1 up to 10 no. of service Per

242.2 connection

Single site more than 10 no of service connection Per

Providing ,Supplying and Operating Required

vehicals/mashinaries on riverfront for

243 diff.maintanance work including diesel,driver etc.all

complete for working 8 hrs shift as directed by

243.1 for Tractor with trolly shift

RGB Amplifier Inpitu/output voltage:DC 12-24V,Total

244 output of current with required Accessories for no

Lighting letters

RGB Controler Inpitu/output voltage:DC 12-24V for

Lighting letters

246 Jumper for LED Lighting Letters no

PART A TOTAL AMOUNT

PART A TOTAL AMOUNT

PART-B LIST OF BUYBACK ITEMS

Existing Tubelight with tube and its accessories

Swicthboard - 2 module to 16 module (with all related

248 accessories like switch, Socket, regulator, conduit) Each

249 Copper Wire size from 1.0 Sqmm to 6.0 Sqmm Each

Aluminium cable size from 10 Sqmm to 25 Sqmm

251 Copper cable size from 10 Sqmm to 25 Sqmm Each

252 SP MCB size from 6 to 25 A Each

253 Dp MCB size from 25 to 63 A Each

254 FP MCB size from 63 to 200 A Each

Exhasut Fan 200 mm - 300 mm (metal and PVC

256 Ceiling Fan - 1200mm with Fan rode and hook Each

257 Wall Fan size- 400 mm - 600mm Each

258 Distribuiton Board SPN - 4 Way to 16 Way Each

259 Distribuiton Board TPN - 4 Way to 16 Way Each

260 Flood Light - 50 to 200 Watt Each

Any OLD LED Fitting surface/recess - 9 Watt to

262 Existing Streetlight Poles Each

263 Existing Streetlight fittings Each

264 Decorative Post top fittings Each

265 Up to 80 ltr capacity water cooler Each

266 150/150 ltr/hr capacity water cooler Each

267 water purifier up to any capacity Each

PART-B TOTAL AMOUNT

PART-B TOTAL AMOUNT

Net Amount (Part A - Part B)

Total Amount without GST

Total Amount without GST

Total Amount with GST

Total Amount with GST

I/We am/are willing to carry out work at_________________%above or ___________%

Below the estimated cost mentioned above.

The amount of my/our tender works out as under Estimated cost put up to tender:-

Add__________% Above:-Rs.____________OR :-Deduct___________%Below:-

Net Amout in Rs.(After Additional/deduction):-__________________________________

NOTE:- (1)The Quoted Rate shall be inclusive of all taxes GST.