Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.4 LAccepted-AOC | L1 | Accepted-AOC Awarded being L1 | |
| 2 | L2₹28.3 L+₹1.9 L (7.01%)Rejected-AOC VILL BHANGERI PO ROORKEE PIN 247667 | HARIDWAR | UTTARAKHAND | 247667 | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹29.9 L+₹3.4 L (13.0%)Rejected-AOC D 502 SHIVILOK COLONY RAIPUR ROAD DEHRADUN | DEHRADUN | DEHRADUN | UTTARAKHAND | L3 | Rejected-AOC Being not L1 | |
| 4 | L4₹32.4 L+₹6.0 L (22.6%)Rejected-AOC 20 C RAGHUVANSH ENCLAVE KALIDAS ROAD DEHRADUN | L4 | Rejected-AOC Being not L1 |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
13 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (MES) Roorkee
GARRISON ENGINEER ROORKEE
WELCOME MAINT IN MD ACCN IN AGE B/R-III UNDER GE ROORKEE
2023_MES_595959_2
8392/266/E8
Open Tender
Civil Works
Item Rate
180 days
ROORKEE
Please refer tender documents
8 documents required · 8 mandatory
₹500
GE (MES) Roorkee
₹84,000
Yes
21 Aug 2023
22 Jun 2023
17 Jul 2023
22 Jun 2023
13 Jul 2023
29 Jun 2023
Amount
Taking down cement plastering at any description on brick wall etc including raking out joints hacking for key scrubbing down with water etc and removing unserviceable material,outside of A 1 defence land complete all as specified and directed.
M&L rendering 10 mm thick in CM 1:3 in ceiling finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for white washing three coats on ceiling incl preparation of newly plastered surfaces.complete all as specified and directed by Engr In Charge.
M&L Rendering 15 mm thick cement plaster on brick walls in CM 1:4 mixed with integral water proofing compound finished to even & smooth w/o using extra cement. Note :- Integral water proofing compound will be measured and paid seperately.
M&L for preparation of old decorated surface of exterior wall by complete removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint (wallmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of exterior paint. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of acrylic emulsion paint for each building. (v). The colour / shade will be all as approved by GE / AGE (I) (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor
M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper over one coat of wall putty using roller all as specified and prescribed by manufacturer of paint Ist Quality and all as directed at site by Engr-in-Charge . Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v). The colour / shade will be all as approved by GE / AGE (I)
Supply only water proofing compound ISI Marked complete all as specified and directed.
M&L Rendering 15 mm thick on fair faces of brick work or concrete walls surfaces in CM 1:6 finished to even & smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- 1. The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v). The colour / shade will be all as approved by GE / AGE (I) (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor complete all as specified and directed.
M&L for preparation of new surface of internal wall by reputed paint manufacturers and applying two coats of acrylic distemper over one coat of wall putty using roller all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge . Note:- (i) The new surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v). The colour / shade will be all as approved by GE / AGE (I)
M&L for preparation of old surface of wall plastered including cornices and pillasters etc and applying one coat of white wash on wall all as specified and as directed by Engr-in-Charge.
M&L for preparation of old surface of ceiling plastered including cornices and pillasters etc and applying one coat of white wash on ceiling all as specified and as directed by Engr-in-Charge.
M & L for complete removal of existing treatment on walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of walls and applying 1.00mm thick wall care putty of approved makes as on wall surfaces and two coats of oil bound distemper (White or tinted ) by Roller complete all as specified and directed.
M & L for complete removal of existing treatment on ceiling, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of ceiling and applying two coats of Oil bound distemper by Roller complete all as specified and directed.
M & L for complete removal of existing treatment on walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of walls and applying two coats of cement base paint complete all as specified and directed.
M&L for preparation of old painted wooden surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality complete all as specified and directed by Engg in charge.
M&L for preparation of old painted steel surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality complete all as specified and directed.
M&L for for writing letters/Bldg Nos or figures(Block, Roman or Indian) on wall 10cm height using synthetic enamel paint white or circular /black painted, black back ground complete all as specified and directed.
Demolition of cement concrete (un-reinforced) of any description and in any position complete all as specified and directed.
M&L 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base/leveling course etc.complete all as specified and directed.
M&L for providing cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in sides of PCC tiles/ interlocking tiles, bed blocks, for hold fast and similar work complete all as specified and directed.
M&L Cement concrete tiles 25cm x 25cm x 20mm thick, machine pressed with gray cement and pigment set jointed and pointed in neat cement slurry in floors, and cut and polished over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for 60 mm thick Glossy Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade made with grey cement and pigment complete all as specified and directed
Supply and laying sand (25 mm thickness ) for cushioning to interlocking paver block complete all as specified and directed.
M&L for coloured pavement ceramic tile (min size 300 x 300 mm) and 10 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over 15mm thick screed bed in CM 1:6 complete all as specified.
M & L for granite 14-16 mm thick (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding of front side if required complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M & L for coloured glazed ceramic joint free tiles in vertical surface 450X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 complete all as specified and directed.
M & L for Non - skid coloured ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
M & L Vitrified coloured ceramic tiles double charged, 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
M & L Vitrified coloured ceramic tiles double charged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding not 0.36 sqm in walls etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl laid over and including 10 mm thick backing coat in CM 1:4, as on vertical surfaces such as skirting, dados, etc, complete all as specified and as directed.
Demolition of RCC of any description and in any position complete all as specified and directed.
M & L for precast reinforced cement concrete type B-1 1 : 2 : 4 in landings, cover slabs for manholes, kitchen platform etc and similar articles with plain faces, with plain fair faces, including chamfers, weathering, throating etc and setting in mortar complete with joints to match set in CM 1:6 complete all as specified and directed.
M & L Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required incl cranking, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Easing of wooden window shutters (One unit shall comprise of one window irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts etc.
Easing of wooden door /CB shutters (One unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts sliding bolt etc.
Easing of steel window shutters (One unit shall comprise of one window irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts etc.
Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed .
Taking down chowkhat or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified and directed .
S & F pressed steel frame size 105x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed.
S & F pressed steel frame size 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed.
M&L Plain cement concrete B-1 1:2:4 ( 20 mm graded stone aggregate ) in filling of preseed steel frame , complete all as specified and directed
S & F factory made 30 mm thick 2nd class HW glazed skeleton shutter divided into square with plain chamfered or rounded with sash bars open rebated and prepared to receive glass/gauge etc. with plain chamfered rounded fitted with cut and mitred beads size of members of window, ventilator shutters, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24 (a) and fitted to chowkhat complete all as specified and directed .
S & F Factory made 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides including fixing of rubber door cills, complete as directed.
M & L for preparation of newly surface of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutter from the frame) not exc. 1.5 sq. m each complete all as specified and directed .
S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S & F solid PVC door frame of size, 50x47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and directed.
S & F factory made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded including taking down existing windows complete all as specified and directed.
S & F factory made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded including taking down existing windows complete all as specified and directed.
S&F MS framed work such as grills, gratings, hold fast etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bar, barred iron door, ladders, framed balusters, walk way, railings frame work of water tank and similar work confirming to Fe 290 Gde E165 complete all as specified and directed.
M & L for preparation of newly steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.
S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed.
S & F 150 mm long floor door stopper of Aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door complete all as specified and directed.
S&F 150mm ordinary helical door spring incl. roller and roller plate complete all as specified and directed. "make : Ritz."
S&F butt hinges 125mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed complete all as specified and directed.
S&F butt hinges 100mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed complete all as specified and directed.
S&F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.
S&F 100mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed.
S&F 250mm long alumn. alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section complete all as specified and directed.
S & F in repair150 mm long floor door stopper of Aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door complete all as specified and directed.
S&F in repair 150mm ordinary helical door spring incl. roller and roller plate complete all as specified and directed. "make : Ritz."
S&F in repair butt hinges 125mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed complete all as specified and directed.
S&F in repair butt hinges 100mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed complete all as specified and directed.
S&F in repair 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.
S&F in repair 100mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.
S&F in repair aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.
S&F in repair aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed.
S&F in repair 250mm long alumn. alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section complete all as specified and directed.
Hacking out old broken glass of any thickness/size or quality from wooden/metal frame fixed with putty/beading & S&F 3mm thick sheet glass, plain ordinary quality not exc 0.5sqm in each pane with and incl putty/beading complete all as specified and directed.
All as per item No above but 3mm thick pin headed glass complete all as specified and directed.
S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc. complete all as specified and directed.
S & F in repairs of 25 mm dia stainless steel fancy type curtain rod with and including stainless steel fancy type brackets, stops, in suitable size and necessary rings, side caps etc. complete all as specified and directed.
S & F in repairs Stainless steel Door Stopper single leg Best quality complete all as specified and directed.
S&F rubber door cill 40/50mm as required in door cill complete with required nails etc. complete all as specified and directed.
S&F door seal brush with aluminium holder length 85 CM to 90 CM complete with required nails etc complete all as specified and directed.
M & L for replacement of wooden glazing beading not exc 3 sq cm of sectional area of 2nd class hard wood straight (any size) finished wrought of glazing or gauged joinery for fixing wire gauge/securing glass pane complete all as specified and directed.
S & F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110 mm bore) including taking down complete all as specified and directed.
S & F in repairs PVC (SWR) bends / elbow 110 mm complete all as specified and directed.
S & F in repairs PVC (SWR) 'T' 110 mm complete all as specified and directed.
S & F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (75 mm bore) including taking down complete all as specified and directed.
S & F in repairs PVC (SWR) bends / elbow 75 mm complete all as specified and directed.
S & F in repairs vitreous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap (Make : Parryware/Hindware) and making good the disturbed surface to match with the existing complete all as specified and as directed.
S & F vitreous china squatting pan (Orissa pattern) long pan including connection to trap, and to flushing pipe , anti-syphonage pipe etc incl making good to floor fixed in repair size 580x440mm white with integral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush) complete all as specified and directed.
S&F in repairs Floor mounted viterous china wash down water closet including self close seat cover white incl 'S' trap and including Flushing Cistern making good the disturbed surface to match with the existing complete all as specified and directed. ( Make : Prayag Cat No 4230 or Equivalent )
S&F in repairs Wall Hung viterous china wash down water closet including self close seat cover white incl 'S' trap including concealed Flushing Cistern and making good the disturbed surface to match with the existing complete all as specified and directed. ( Make : Prayag Cat No 4520 or Equivalent )
S&F in repairs plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified.
S&F in repair Self closing Seat cover for floor mounted water closet , complete all as specified and directed
S&F in repair Self closing Seat cover for Wall hung water closet , complete all as specified and directed
S&F in repairs vitreous china wash hand basin, white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified.(Make : Prayag cat No 4645 or Equivalent)
S&F in repairs Pedestal type vitreous china wash hand basin, complete all as specified.(Make : Prayag cat No 4603 or Equivalent)
M & L in repair GI tubing ISI marked medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified incl taking down complete all as specified and directed.
M & L in repair GI tubing ISI marked medium grade 20 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified incl taking down complete all as specified and directed.
S&F in repairs towel rail 600mm long 20mm dia brass chromium plated with brackets fixed with wooden guities embeded in cement mortar (1 : 3) with steel screws etc, complete all as specified. ( Make : Prayag Cat No Ba-1S or Equivalent)
S&F Cabinet Mirror (400mm x 500mm) complete all as specified. (Make : Prayag Cat No.555)
S & F in repairs for stainless steel peg set of six complete all as specified and directed. (ISI Marked)
S & F in repairs mild steel chromium plated grating (round) 125 mm dia fixed in cement mortar 1:3 over floor/nahani trap (with hole and without hole) complete all as specified and directed.
S&F in repairs CP brass shower rose 100mm size over head shower round ABS Chrome without arm suitable for 15mm bore pipe complete all as specified. (Make : Prayag cat No. BOS-11 or Equivalent )
S&F in repairs CP brass shower rose 150mm Square size shower with 300mm arm suitable for 15mm bore pipe complete all as specified. (Make : Prayag cat No. ECO - 63 or Equivalent)
S&F in repairs PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed. (Make Pryag/ Cera)
S&F in repairs PVC connection 600mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed. (Make Pryag/ Cera)
S&F in repairs waste fitting (coupling) brass chromium plated 32mm dia for WHB complete all as specified and directed (Make : Prayag Cat No. BEA-15)
All as per item No above but for stainless steel sink of size 40/50 mm complete all as directed, (Make : Prayag Cat No. BEA-16B)
S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed.(Make : Parryware/ Pryag/ Cera).
S & F in repair Brass CP wash hand basin mixer incl copper nipple for connecting with PVC connection 15mm for mixing hot & cold water screwed down for iron pipe and fixed. (Make : Prayag Cat No. 7350 or Equivalent).
S & F in repair wall mixer Non Telephonic 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete (Make : Prayag cat No.7365 or Equivalent )
S & F in repair wall mixer with 3 in 1 ( Provision for over head shower and hand shower) 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete (Make : Prayag cat No.7380 or Equivalent )
S&F in repairs handshower with 1.2 Mtr flexible tube and hooks complete suitable for 15mm bore pipe complete all as specified. (Make : Prayag cat No. BH-73 or Equivalent )
S&F in repairs brass chromium plated bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified. (Make : Prayag Cat No 7306 or EQUIVALENT ).
S & F in repairs brass chromium plated bib tap (long body) for iron pipe of 15 mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed.
S & F in repairs stop/angle cock ISI marked fancy type, chromium plated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15 mm bore complete all as specified and directed. (Model : COS-103053/MQT-513KN Make : ESSCO (Jaquar) OR EQUIVALENT RANGE OF Prayag, JAQUAR, Pearl).
S&F in repairs chromium plated cast copper alloy stop cock fancy type (concealed type)screwed both ends high pressure for 15mm bore size iron pipe or ferrule complete all as specified . (Make : Prayag Cat No 7318 or Equivalent)
M & L for 75mm dia cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
S&F in repairs 15mm dia brass chromium plated pillar tap with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long scewed shank complete all as specified. Make : Prayag Cat No 7302 OR EQUIVALENT
S&F in repairs health faucet with (1.5 Mtr tube & hooks ) complete all as specified. (Make : Prayag Cat No.BEA-93 or Equivalent)
S&F in repairs Jet Spray with (1.5 Mtr tube) complete all as specified. (Make : Prayag Cat No.BEA-17 or Equivalent)
S & F in repairs CP toilet paper holder complete all as specified and directed. Make : Jaguar / Pearl /Pryag.
Dismantling of water tanks 1000 ltr of capacity and removing to store complete all as specified and directed.
M&L 1000 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl 20mm PTMT ball valve (Ball valve make:- Prayag) hoisted and fixed in position all as specified in SSR Part I.
Dismantling of water tanks 500 ltr of capacity and removing to store complete all as specified and directed.
M&L 500 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl 20mm PTMT ball valve (Ball valve make:- Prayag) hoisted and fixed in position all as specified in SSR Part I.
S & F in repairs HDPE PVC lid (cover) for 500 Ltrs capacity PVC tank complete all as specified and directed.
S&F in repair Stainless steel sink, 1.00mm thick for with out drainage board kitchen or laboratory, with plug, waste fittings, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete (Make:- Nirali ).
S & F of stainless steel plate rack of size 31” X 30” X 10” made of 1 mm thick stainless steel plate complete al as specified..
S & F of Soap dish, any type, fixed to plugs with chromium plated brass screws all as specified and directed.
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. Make Prayag, Pearl).
S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long corner shelf size as per manufacturer specified. Make Prayag / Pearl.
M&L 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed
M&L powder coated Anodised aluminium frame for doors, windows, ventilators, partition walls etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
M&L powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including 01 no mortice lock, necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, door stoper, hinges if required, anodised aluminum snap beading screws etc. hungs/ sliding type including particle board as required complete all as specified and directed.
S&F anodised powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer in Charge.
S&F sheet glass 5 mm thick ordinary quality and glazing with neoprane beading to aluminium frame complete exc 0.5 sqm in each pane complete all as specified and directed.
S&F aluminium powder coated grill 2"x2" aparture of weight not less than 2.5 Kg per Square metre fixed in aluminium windows complete all as specified and directed.
S & F in repairs for 9 mm thick Multi layer water proof ply wood (make: Radium/sunrise or equivalent) fixed with screws to timber frame work for cabinet car case both sides covered with and including cost of 0.8mm thick decorative laminates, Mica type 1 of surface finished, colour, pattern as approved fixed with approved adhesive and the thickness of the shutter is edge lipped by 9 mm width x 1 mm thick PVC sheet using solvent cement etc. including ,magnet, piono hinges, including fixing of bascket in kitchen with all fixing accessories etc complete as direction of GE, manufacturer's specification and drawing complete all as specified and directed.
S & F in repairs for 18mm thick Multi layer water proof ply wood (make: Radium/sunrise or equivalent) fixed with screws to timber frame work for cabinet car case both sides covered covered with and including cost of 0.8mm thick decorative laminates, Mica type 1 of surface finished, colour, pattern as approved fixed with approved adhesive and the thickness of the shutter is edge lipped by 18 mm width x 1 mm thick PVC sheet using solvent cement etc. including ,magnet, piono hinges, including fixing of bascket in kitchen with all fixing accessories etc complete as direction of GE, manufacturer's specification and drawing complete all as specified and directed.
S&F stainless steel bascket cutlurry size-15"x20"x4" (width may be vary as per site contion from 15" to 21") incl powder coated drawer runner/ channel and soft close as required complete all as specified as per manufaturer instruction (PVC shutter/ board paid seperately). Make Hettich.
S&F stainless steel bascket plain size-15"x20"x6" (width may be vary as per site contion from 15" to 21") incl powder coated drawer runner/ channel as required complete all as specified as per manufaturer instruction. Make Hettich and equivalent.
S&F stainless steel bascket for thali size-15"x20"x8" (width may be vary as per site contion from 15" to 21") incl powder coated drawer runner/ channel as required complete all as specified as per manufaturer instruction. Make Hettich and equivalent.
S&F stainless steel bascket for plate size-15"x20"x6" (width may be vary as per site contion from 15" to 21") incl powder coated drawer runner/ channel as required complete all as specified as per manufaturer instruction. Make Hettich and equivalent.
S&F stainless steel bascket plain size-15"x20"x6" (width may be vary as per site contion from 15" to 21") incl powder coated drawer runner/ channel as required complete all as specified as per manufaturer instruction. Make Hettich and equivalent.
S&F in repairs 32mm bore and 75cm long PVC waste pipe for WHB complete all as specified.
M & L for preparation of old treated wall /roof surface including scrapping with wire brushes, rubbing down with emery paper, washing etc and applying one coat of exterior emulsion paint (APEX / Weather coat) complete all as specified and directed.
M & L 150mm size stainless steel bright finish handle (ISI marked) complete all as specified and directed.
Supply and fix in repair Auto hinges for cabinet case d(Make: KARF/HITACHI or equivalent) complete all as specified and directed.
S&F PVC waste pipe of standard pattern, not less than 75cm long , 32/40mm dia for steel sink waste cuppling orurinal of suitable size. Note: (i) All the joinery to be incorporated in work will be factory made. Contractor must submit the supply order to GE and AGE office with in one week of receiving sample approval letter (ii) All the bath/sanitary fittings to be incorporated in work will be brought to MES store in two batches of 50% each and will be subsequently issued as and when necessary to maintain necessary quality. First 50% within 10 days of WO and second as and when directed by Engr-in-Charge. (iii) Rates quoted above shall be inclusive of above points.
AMAR NATH SHARMA
VINAYAK CONSTRUCTION COMPANY
shreyansh construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .