Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹13.0 LAccepted-AOC | 1 | Accepted-AOC AGREEMENT EXECUTED | |
| 2 | Rejected-Technical | - | Rejected-Technical REJECTED |
Tender Value
₹12.5 L
EMD Value
₹31,247
Closing Date
29 Oct 2024, 3:00 pmClosed
BIJOY.K.N
SE COCHIN CORPORATION
EyE2/7400/23-DIV 33-Providing new posts and LED Street lights at Coastal road under Kochi Municipal Corporatio
2024_LSGD_697778_21
EYE2/7600/22
Open Tender
Electrical Works
Item Rate
160 days
ERNAKULAM
Please refer tender documents
8 documents required · 8 mandatory
₹2,760
Yes
₹31,247
Yes
15 Jul 2025
23 Oct 2024
30 Oct 2024
23 Oct 2024
29 Oct 2024
23 Oct 2024
Amount
Part-I-Electrical works
OD111557/2023-2024:Excavation of soft soil of size 1Mx1Mx1.5M for making of foundation of concrete structure for mounting of Octogenal GI post at a depth of 1.75 mtr .Concreating work includes providing 10 mm thick layer of plain cement concrete at bottom ,and RCC in 1;2;4 of size .6Mx.6Mx0.1mm thick as foot slab and continues RCC work of size .35x.35 mtr for a height of 1.75 mtr and plastering exposed surface with cement plaster.
OD111566/2023-2024:Conveyance installation testing and commissioning of Octogaonal Pole with support of Mini crane made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x12 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 8 Meters
OD111574/2023-2024:Supply Conveyance, installation, testing and commissioning of 100W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)(Make-Havells/Surya/Philips)
OD111577/2023-2024:Earthing with GI earth pipe 1 mtr. long 40mm dia. medium class including providing 12mm dia,drilled holes minimum 6 nos along the entire length in alternate arrangement providing test joint using 2 nos ,25x3mm GI strip minimum size 25cm suitably shaped and tightly clamped to the pipe electrode using 25x6 mm steel bolts ,nuts &washer & providing 2 nos ,6mm dia. drilled holes for clamping & bolting earth lead & making masonary chamber made of bricks and duly plastered
90.16.3.1:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)20 x 3 mm GI strip
OD111871/2023-2024:Supply and providing 250x250x170 mm or nearest size thermo plastic outdor junction box suitable for mounting fuse unit and N/L on suitably clamped on post
OD111870/2023-2024:Supply and installation of 1 Nos of 32 A,415 V HRC bakelite fuse fitting with HRC fuse link and 32 A N/L on existing meter/cubicle board
OD111869/2023-2024:Supply and providing 250x250x170 mm or nearest size thermo plastic outdor junction box suitable for mounting fuse unit/ MCB etc on suitably clamped on tubuler post/on concrete fountation o (SINTEX or equivelent make) with DIN bar for fixing MCB and providing heavy guage connector for loop in and out of aluminium armoured from one post to another cable
2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
90.6.5.11:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm
9.1.3:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 16 sq. mm (22mm)
OD111580/2023-2024:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation40/38 mm or nearest size
90.12.5.4:Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.2 core 16 sq mm
AJITH
Bidder Name
CHANDRAMOHANAN
AJITH
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .