Construction of LILO of 220KV Tanalpur CB Ganj line at proposed 220KV Substation Banbasa Tanakpur

Amount

Construction of LILO of 220 kV Tanakpur - CB Ganj Line at proposed 220 kV Substation Banbasa, Tanakpur

PART A : SUPPLY

Towers

Fabrication, Galvanizing & Supply of Normal Stub/Raised Chimney Stub (Material Grade E250 For MS & E350 For HT of Quality B0) for various type of 220 kV D/C towers with cleat including Nuts & Bolt.

For B type (2o-30o)

For C type (30o-60o)

Supply of Towers

Galvanized B type D/C tower with Bolts, Nuts, flat washers, pack washers including 3 mtr. 6 mtr. & 9 mtr Body Extension.

Galvanized C type D/C tower with Bolts, Nuts,flat washers, pack washers including 3 mtr. 6 mtr. & 9 mtr Body Extension.

Galvanized Template of B type tower including Bolts, Nuts & washers etc.(1 Nos.)

Galvanized Template of C type tower including Bolts, Nuts & washers etc.(1 Nos.)

ACSR Zebra Conductor

Single Tension fitting for Single ACSR Zebra Conductor suitbale for 160 KN Insulator

Pilot fitting suitable for Single ACSR Zebra (90 KN Disc Insulator)

Tension fitting for GS Earth wire 7/10 SWG

Disc Insualtor 160 KN

Disc Insualtor 90 KN (for Pilot String)

Accessories for conductor & earth wire

Vibration damper for Zebra Conductor

Flexible Copper Bond

Repair sleeve for ACSR Zebra conductor

Mid span compression joint for ACSR Zebra Conductor

Mid span compression joint for GS earth wire 7/10 SWG

Supply of following tower accessories

Number plate

Danger Plate

Circuit Plate (set of two)

Phase Plate (set of three)

Anti-Climbing device

Pipe type earthing

Supply of following items for aviation requirements

Span markers

Obstruction lights (to be provided as per IS 5613)

1 Medium + 2 low intensity

1 Medium + 4 low intensity

Supply of Wind Measuring Equipment

Supply of OPGW

OPGW 24 Fibre - 220KV

All requiered hardware such as Tension assemblies, earthing bond and downlead clamps as needed for a tension tower suitable for 24 Fibre OPGW on 220 kV lines

Vibration Damper

Reinforcing rod

Splice enclosure along with the downlead clamps as needed for 24 Fiber OPGW

Approach Cable 24 Fibre

Junction Box (OPGW-Approach cable) along with downlead clamp for 24 Fibre

FODP 24F : Indoor Type, rack mounted with FCPC coupling and pig tails (5 mtrs each).

Description of Work / Item(s)

Amount

Construction of LILO of 220 kV Tanakpur - CB Ganj Line at proposed 220 kV Substation Banbasa, Tanakpur

PART B : Erection

Survey

Survey, Profiling, Alignment etc. including prepration of Tower schedule, Check survey, pegmarking of locations,Optimisation of tower locations, prepration of forest case complete in all respect ready for submission to nodal officer (if any) etc.

Soil Investigation

Setting of Stubs, inlcuding all foundation work but excluding the cost of concreting and excavation

B type Double Circuit (2o- 30o ) tower

C type Double Circuit (30o- 60o) tower

Concrete for RCC type foundations including all material, shoring and shuttering if any, forming, concreting and curing of water inlcuding cost of cement for concrete (cost of supply of MS steel bar is not to be included)

Excavation of foundation pits including all earthwork, backfilling and levelling etc.

Super structure erection of various type of towers, tower part, tower extention (complete) with bolts & nuts and including all work above ground level excluding hoisting of insulators & fitting of danger plate, number plate, phase plate, circuit plate, anti climbing devices and bird guards, but including punching of bolts.

B type tower including Erection for 3 mtr., 6 mtr. & 9 mtr. Body Extension

C type tower including Erection for 3 mtr., 6 mtr. & 9 mtr. Body Extension

Laying, Stringing, Tensioning, clamping, jointing etc. complete with Single ACSR Zebra conductor including hoisting of insulators and fitting of vibration dampers etc. for complete route of D/C Single Zebra.

Grounding work for Pipe type earthing including excavation and backfilling (Set of Two).

Tack welding on bolts and nuts on Ist section of towers

Fixing of tower accessories:

Danger plate

Number plate

Phase Plate (set of three)

Circuit Plate (set of two)

Anti-Climbing device

M.S. Steel bar for reinforcement

Installation of Avaition Items

Span markers

Obstruction lights (to be provided as per IS 5613)

1 Medium + 2 low intensity

1 Medium + 4 low intensity

Painting of Towers (above 45m from ground level)

Installation of Wind Measuring Equipment

Erection of OPGW

Laying, Stringing Tensioning, clamping, jointing etc. complete with OPGW 24 Fibre - 220 KV and all requiered hardware such as Vibration damper, tension assemblies, earthing bond and downlead clamps as needed for a tension tower suitable for 24 Fibre OPGW on 220 kV lines

Reinforcing rod

Splice enclosure along with the downlead clamps as needed for 24 Fiber OPGW

Approach Cable 24 Fibre

Junction Box (OPGW-Approach cable) along with downlead clamp for 24 Fibre

FODP 24F : Indoor Type, rack mounted with FCPC coupling and pig tails (5 mtrs each).

Description of Work / Item(s)

Amount

Total Part-A (Supply) from BoQ1 sheet WITHOUT GST

Total Part-B (Erection) from BoQ2 sheet WITHOUT GST

Add GST* Amount on (Total of Part-A + Total of Part-B) above

JAGAD ELECTRICAL AND FABRICATORS (BID ID -346910)

M/S AJAY TOMAR CONTRACTOR (BID ID -343604)

JAGAD ELECTRICAL AND FABRICATORS (BID ID -346910)