Fabrication work of various line Materials for HT/LT line & TC at Valsad rural division store (Atak pardi) under Valsad Rural Division premises.

Item Code Details of works Unit FY 2024-25

FABRICATION FROM RAW MATERIALS OF MILD STEEL

Fabrication of Anchor Rod from 16 SQ.mm MS

Raoundbar & 65 mm x 65 mm x 6 mm /

1 mm x 50 mm x 6 mm M.S. angle as per No.

approved drawing and requirement of the

Fabrication of Eye Bolt from 16 SQ.mm MS

Raoundbar with supplying of 2 (two) nuts of

suitable size as per approved drawing and

requirement of the company.

Fabrication of Turn Buckle from 16 SQ.mm MS

9910000028/ Raoundbar & 65 mm x 65 mm x 6 mm /

3 mm x 50 mm x 6 mm M.S. angle as per No.

9910000016 approved drawing and requirement of the

Fabrication of 11' (feet) long Top/Bottom/D.O.

angle from 65 mm x 65 mm x 6 mm M.S.

angle as per approved drawing and

requirement of the company.

Fabrication of 9' (feet) long Top/Bottom/D.O.

angle from 65 mm x 65 mm x 6 mm M.S.

angle as per approved drawing and

requirement of the company.

Fabrication of 4'6" (feet) long Tapping /

bracing angle from 65 mm x 65 mm x 6 mm

M.S. angle as per approved drawing and

requirement of the company.

Fabrication of 2'3" (feet) long bracing/ support

angle from 65 mm x 65 mm x 6 mm M.S.

angle as per approved drawing and

requirement of the company.

Fabrication of 11KV HT 'V' Cross Arm from

mm x 65 mm x 6 mm M.S. angle as per

approved drawing and requirement of the

Fabrication of 11KV HT Top fitting from

mm x 65 mm x 6 mm M.S. angle and 50mm

x 6 mm M.S. flat as per approved drawing and

requirement of the company.

Fabrication of 22KV HT Top fitting from

mm x 65 mm x 6 mm M.S. angle and 50mm

x 6 mm M.S. flat as per approved drawing and

requirement of the company.

Fabrication of 22KV HT 'V' Cross Arm from

mm x 65 mm x 6 mm M.S. angle as per

approved drawing and requirement of the

Fabrication of Guy Clamp pair suitable for PSC

pole from 50mm x 6 mm M.S. flat as per

approved drawing and requirement of the

Fabrication of 'U' Clamp from 50mm x 6 mm

13 9910000024 M.S. flat as per approved drawing and No.

requirement of the company.

Fabrication of 'C' clamp suitable for PSC pole

from 50mm x 6 mm M.S. flat as per

approved drawing and requirement of the

Fabrication of 'C' clamp suitable for RSJ

GIRDER pole from 50mm x 6 mm M.S. flat as

per approved drawing and requirement of the

Fabrication of Three hole patti from 50mm x

16 9910000056 6 mm M.S. flat as per approved drawing and No.

requirement of the company.

Fabrication of 11' (feet) long Top/Bottom

channel from 100 mm x 50 mm x 5 mm M.S.

channel as per approved drawing and

requirement of the company.

Fabrication of 9' (feet) long Top/Bottom

channel from 100 mm x 50 mm x 5 mm M.S.

channel as per approved drawing and

requirement of the company.

Fabrication of 11'(feet) long angle bracing

from 50 mm x 50 mm x 6 mm M.S. angle as

per approved drawing and requirement of the

Fabrication of 9'(feet) long angle bracing from

50 mm x 50 mm x 6 mm M.S. angle as per

approved drawing and requirement of the

Fabrication of 11' (feet) long channel welded

21 9910000062 from assorted length of scrap channel as per No.

approved and requirement of the company

Fabrication of 9' (feet) long channel welded

22 9910000063 from assorted length of scrap channel as per No.

approved and requirement of the company

Fabrication of Guy Clamp pair suitable for

mtr PSC pole from 50mm x 6 mm M.S. flat as

per approved drawing and requirement of the

Fabrication of Guy Clamp pair suitable for

9/11mtr RSJ GIRDER pole from 50mm x

mm M.S. flat as per approved drawing and

requirement of the company.

Fabrication of 5' (feet) long Tapping angle

from 65 mm x 65 mm x 6 mm M.S. angle as

per approved drawing and requirement of the

Fabrication of H.T. Ext'n suitable for 22KV

system from 65 x 65 x 6 mm M.S. angle as per

approved drawing and requirement of the

Fabrication of H.T. Ext'n suitable for 11KV

system from 65 x 65 x 6 mm M.S. angle as per

approved drawing and requirement of the

Fabrication of 750 mm long Channel for HT AB

conductor from 100mm x 50mm x 5mm M.S.

Channel as per approved drawing and

requirement of the company.

Fabrication of 22KV HT "V" Cross Arm from

100mm x 50mm x 5mm M.S. Channel as per

approved drawing and requirement of the

Total of schedule B:-

Amount in Words: (Twenty Five Lacs Only)

1. DGVCL will provide key material like M.S. materials, ABC/Bare conductors, PSC/RSJ

Poles, Insulators, Fabricated materials etc to the contractor.

2. All fabricated items shall be fabricated as per DGVCL approved drawing and by

welding rods confirming to the relevant ISI specification and as directed by Engineer

3. Necessary electricity connection for fabrication items shall be provided by DGVCL on

payment of required charge for connection & electricity bill of the same shall be paid

4. All the rates are inclusive of PF & Exclusive of GST applicable time to time.

5. All fabricated items shall be painted with good quality (ISI Marked) of red oxide

6. Fabrication items are to be prepared at Valsad rural division store (Atak

7. All steel material are to be painted as below:

(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ poles &

steel fabricated materials of RSJ/PSC poles is must be required.

(b) Two coats of approved ISI mark red oxide (primer) is to be properly painted for the RSJ

poles & steel fabricated materials of RSJ/PSC poles.

(c) Two coats of approved ISI mark silver paint (i.e. triple mangoes or equivalent quality

silver paint) is to be properly painted on to the RSJ poles & steel fabricated materials of

Executive Engineer (O&M)

Valsad Rural Division.