Providing solar fencing for the plot at Block-1 and Malakam coconut nursery at Seed Garden Complex Munderi

Amount

Solar fencing

od1512/2019_2020 : Crystalline siliconetrrestrial photo voltaic module conforming toIEC61215/is 14286 with peak voltage of 100 watts

od1513/2019_2020 : Power fence Energizer of standard make conforming to IEC 60335-2-76-2002 of IS 302-2-76

od1514/2019_2020 : Battery for solar power fencing 12 V 100 A H Rechargeable maintenance free Lead Acid battery of reputed make.

od1515/2019_2020 : Supplying strain insulators should be made of high quality industrial plastic rated for 15 K V ,UV stabilizedand fire resistant

od1516/2019_2020 : Fencing wire for solar system should be 12 gauge high tensile steel and should be hot dip galvanized toat least 250 Gsm, to ensure rust-free performance of 10 years

od1517/2019_2020 : Earth Kits with stainless steel core, encased with electrolytes should be deployed insufficient numbers to protect energizer from lightning strikes and to ensure uniformshock, along the entire length of the fence.

od1518/2019_2020 : Lead out cable for fence system Double insulated cable inner core wire 2 sq.mm hot dipped galvanizedsteel core, capable of withstanding 15 KV should be provided to prevent bimetal salt formation atconnections.

od1519/2019_2020 : Tool Kit For solar fencing system including neon tester and Digital Voltage meter.

od1520/2019_2020 : Lightning diverter for solar fencing system

od1521/2019_2020 : Supplying and providing Warning alarm system to alert external intrusion of fence line .

od1522/2019_2020 : Providing Spring / Rope gate kit to electrify the gate at the entrance or any such similar requirements. It consists of spring / steel rope with handle made up of Polyethylene

od1523/2019_2020 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

od1524/2019_2020 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

od1525/2019_2020 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

od1526/2019_2020 : Supplying reel insulator

od1527/2019_2020 : Permanent wire tightner made of special aluminium alloy designed for 15 K V U V stabilised.

od3727/2019_2020 : Supplying and installing suitable battery charger and charge control unit for fencing system of standardmake

od3731/2019_2020 : Warning sign boards for every 250 m distance along the fence line

od1528/2019_2020 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

od1529/2019_2020 : Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.<br>All kinds of soil

4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

od1530/2019_2020 : Fencing with high tension wire through insulators tied in the intermediate/corner posts fixed an average distance of 3 m apart including the labor charge of fixing posts into lines and levels ,tying insulators to the posts etc. complete the fence line excluding the cost of materials.

od1531/2019_2020 : Providing and fixing angle iron frames for doors, windows and ventilators of mildsteel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall withdash fastener, including fixing of necessary butt hinges and screws and applying apriming coat of approved steel primer, all complete as per the direction ofEngineer In charge.

M/s Power Fencing

Bidder Name

M/s Power Fencing

New General Store