Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
25 Sept 2026, 6:00 pm3d left
Chief officer, Botad Nagar Palika
item rate tender for building reparing work in botad city (2026/27) (2ND ATTEMPT)
344514
26/2026-27
Open
Civil - All
Works
Bhavnagar
3 documents required · 3 mandatory
₹900
chief officer botad nagarpalika
₹50,000
14 Sept 2026
14 Sept 2026
14 Sept 2026
25 Sept 2026
14 Sept 2026
No Item Unit Rate
Excavation for foundation upto 1.5 m depth including sorting out and stacking
of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) CUMT
1 Loose or soft soil
Excavation for foundation upto 1.5 m depth including sorting out and stacking
of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) CUMT
2 Dense or Hard soil
Excavation for foundation upto 1.5 m depth including sorting out and stacking
of useful materials and disposing off the excavated stuff upto 50 Meter lead.(C) CUMT
Excavation for foundation upto 1.5 m depth including sorting out and stacking
of useful materials and disposing off the excavated stuff upto 50 Meter lead.(E) CUMT
Box cutting the road surface to proper slope and camber for making a base for road
work including removing the excavated stuff and depositing on the road side slope CUMT
5 as directed upto 50Mt.lead.
Demolition including stacking of serviceable materilas and disposal of
6 unserviceable materials with all lead and lift. (i) R.C.C. work
Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand
broken stone aggregates 40 mm nominal size) and curing complete excluding cost CUMT
7 of formwork in (A) Foundation and Plinth (upto 10 ton) for road work
Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4-
graded stone aggregates 20 mm nominal size) and curing complete including cost
of formwork and reinforcement for reinforced concrete work in (A) Foundations,
8 footings, Base or columns and Mass concrete (upto 10 ton) for road work
Providing and laying controlled cement concrete M.250 and curing complete
including the cost of formwork, channelwork in (A) Foundations, footings,
Base of columns and Mass concrete. (for road work and foundation)
Providing and laying controlled cement concrete M.200 exposed work with
curing etc. complete including the cost of formwork but excluding the cost of
reinforcement for R.C.C. work in (A) BEAMS :(ii) Having cross-sectional area
10 more than 0.08Sq.M and upto 0.12 Sq.M
Providing and laying controlled cement concrete M.200 exposed work with
curing etc. complete including the cost of formwork but excluding the cost of
reinforcement for R.C.C. work in (A) BEAMS :(iii) Having cross-sectional area
11 more than 0.12Sq.M and upto 0.18 Sq.M
Demolition of Brick work and stone masonry including stacking of serviceable
materilas and disposal of unserviceable materials with all lead and lift.(ii) In CUMT
12 Cement Mortar.
Brickwwork using common burnt clay building bricks having crushing strength
not less than 35 kg/sq.cm infondation and plinth Cement Mortar 1:6 (1-Cement : CUMT
13 6- Fine sand) (B) Conventional
Supplying Labour Charges For Mason-1 for site works / miscellaneous work
etc.complete as directed by Engineer in Charge Each
Supplying Labour Charges For Mazdoor (Male) for site works/ miscellaneous
work etc.complete as directed by Engineer in Charge Each
Filling available excavated earth(excluding rock) in trenches. plinth,sides of
foundations etc. in layers notexceeding 20 cm. in depth consolidating each cumt
16 disposited layer by ramming and watering
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,
17 binding and placing in position complete upto floor two level
Brick work using common burnt clay building bricks having crushing strength
not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- cumt
18 Cement : 5 -fine sand)(A) Modular
ii) Half brick masonry in common brunt clay building bricks having crushing
strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5 (1- Cement : 5 -coarse sqmt
19 sand ) in foundation and plinth (A) Modular
Extra for brick work in superstructure above floor two level Item No.35 Fly
Providing and fixing M.S. grills of required pattern to iron frames of
windows/doors etc. with M.S. flats at required spacings and
frame alround, square or round bars with round headed bolts and nuts or by
21 screws. (B) ORNAMENTAL GRILL
Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring
treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1- sqmt
22 cement : 3- coarse sand ) finishing with flush pointing in white cement.
Providing and laying polished Kota stone slab flooring over 20mm (Average)
thick base of cement mortar 1:6 (1-cement : 6- coarse sand) or L.M. 1.1.5 laid
over and jointed with grey cement slurry including rubbing and polishing etc.
23 complete. (B) 30mm thick
Providing and laying broken chine mosaic flooring for terrace using 12 mm
to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain
or slope and to be tempered to bring mortar creme out upto surface using white sqmt
cement including rounding off junctions and extending them upto 15 cm along
24 the wall,clearing with water and oxalic acid etc. as directed.
Providing 15mm thick cement plaster in single coat on Rough (Similar)side of
single or half brick walls for interior plastering upto floor two level and finished sqmt
25 even and smooth in (i) Cement mortar 1:3 (1- cement:3-sand)
Providing 20mm thick cement plaster in single coat on single or half brick walls
for interior plastering upto floor two level and finished even and smooth in (i) sqmt
26 Cement mortar 1:3 (1-cement:3-sand)
Wall painting (two coats) with plastic emulsion paint of approved brand and
manufacture on undecorated wall surface to give an even shade including
thoroughly brushing the surface free from mortar droppings and other foreign
27 matter and sand papered smooth.
Distempeing (Two coats) with oil bound distemper of approved brand and
manufacture and of required shade on wall surfaces to give an even shade, over
and including a priming coat with distemper primer of approved brand and
manufacture after thoroughly brushing the surface free from mortar dropping and
other foreign matter and also including preparing the
28 surface even and sand papered smooth.
Cement washing with portland cement slurry on wall surface (two coat) to give a
smooth finish including thoroughly broomings the surface to remove all dirt, rmt
29 mortar drops and other foreign Brand.
Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle
30 posts 40mm x 40 mm x6 mm and oil painting 3 coats fixed at 2.5 Mt,C/c. with
five Horizontan lines and two diagonals of galvanised steel barbed wire
weighting 9.38 Kg. per 100 Metre, strained and fixed to posts with G.I,staples
including fixing the postsin ground with 0.5 M x 0.5.M x 0.5 M.
block in C.C1:5:10 etc complete.
Iron & Steel Works
Providing, fabricating, assembling, hoisting / erecting and fixing in position at all
heights of all shapes and sizes with all leads and lifts equal and unequal angles,
flats, channels, structural steel hollow box sections RHS, SHS, tubular of TATA
Structura box sections, (square, rectangular, tubular hollow sections as per IS
4923 & 1161) confirming to latest IS:808 for the work of railings, jali, Entry
gates, bracings, platforms, brackets monkey ladder, cattle trap, insert plates,
windows, false ceiling, rolled steel, channels, angles, angle cleats, gusset plates,
chequred plate, position hips and jack lifters, purlins,etc. including cutting and sqmt
welding the members as per detailed drawing and design. The rate shall include
coat of zinc chromate yellow oxide primer and 2 coats of synthetic enamel paint
of approved make over all the surfaces of the steel sections. (Only standard
measurements will be paid for as actual cut length used at site). Rate shall be
inclusive of cutting, wastage, welding, bending, bolting wherever necessary, in
position welding of required length, grinding, finishing edges, filling the welded
spots with paint. It should also include the cost of approved size of zinc coated
31 nut-bolt and any type and size of Anchor fastners of Hilti or Fisher makes.
Engineer Chief Officer
Botad Nagarpalika Botad Nagarpalika
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
TENDER BUILDING WORK (2).pdf
schedule b 2nd attempt.pdf
02 Vollume-2 Specification Building.pdf.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .