AUGMENTATION OF JAMJODHPUR NAGAR PALIKA WATER SUPPLY SCHEME

SUMMARY (SCHEDULE-B)_AUGMENTATION OF JAMJODHPUR NAGAR PALIKA WATER SUPPLY SCHEME

BID DOCUMENTS FOR "DESIGNING, CONSTRUCTION OF WATER TREATMENT PLANT, PROVIDING, LOWERING, LAYING,

TESTING & COMISIONING OF CLEAR WATER & RAW WATER RISING MAIN & GRAVITY MAIN, PUMP HOUSE, SECURITY CABIN,

COMPOUND WALL, ELECTROMAGNETIC FLOW METERS, AND PUMPING MACHINERY WITH FIVE YEAR OPERATION AND

MAINTENANCE PERIOD UNDER AMRUT 2.0 FOR JAMJODHPUR NAGARPALIKA”

SR NO SCHEDULES NAME OF WORK Final Tender Cost

Raw water rising main connecting Fulzar Dam HW to Existing & Propsed

1 SCHEDULE - B1 ₹

2 SCHEDULE - B2 Water Treatment Plant ₹

3 SCHEDULE - B3 Clear Water Gravity Main Proposed WTP to Existing Sump ₹

4 SCHEDULE - B4 Compound wall with Gate ₹

5 SCHEDULE - B5 Security Cabin ₹

6 SCHEDULE - B6 Pump House ₹

Jamjodhpur WSS Pumping Machinary for Fulzar Dam to Existing &

7 SCHEDULE - B7 ₹

Proposed WTP(Mech)

Jamjodhpur WSS Pumping Machinary for Fulzar Dam to Existing &

8 SCHEDULE - B8 ₹

Proposed WTP(Ele)

Jamjodhpur WSS Pumping Machinary for Fulzar Dam to Existing &

9 SCHEDULE - B9 ₹

Proposed WTP (Ins)

Jamjodhpur WSS Pumping Machinary for Existing Sump to Existing ESR

10 SCHEDULE - B10 ₹

Jamjodhpur WSS Pumping Machinary for Existing Sump to Existing ESR

11 SCHEDULE - B11 ₹

Jamjodhpur WSS Pumping Machinary for Existing Sump to Existing ESR

12 SCHEDULE - B12 ₹

Amount (1) in Rs. ₹

14 SCHEDULE - C1 OPERATION AND MAINTANANCE (FOR 5 YEARS) ₹

Total Amount (1+2) in Rs. ₹

Total Amount (1+2) in Rs. ₹

Schedule B1_Raw water rising main connecting Fulzar Dam HW to Existing & Propsed WTP

Sr No Description Unit Quantity Rate Amount

Excavation for pipe line trenches for water supply, sewerage line, manhole

etc. all with shoring and struting if required as per required gradient and

line including safety provisions using site rails and stacking excavated

1 stuff including up to all required lead cleaning the site etc. complete for all Cum 11865.00 ₹ 102.35 ₹

lifts and strata as specified.

i) 0.0 to 1.5 mt depth.

a) In all sorts of soil and soft murrum

b In hard murrum, boulders incl. macadam road. Cum 2967.00 ₹ 155.25 ₹

Providing and supplying D. I. K-9 grade pipes for following nominal bore

diameter with internal cement mortar lining including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading,

2 unloading, conveyance to departmental stores, stacking etc. complete. (IS Rmt. 99.00 ₹ 1,655.00 ₹

8329-2000). For Sewerage Project Cement Mortar Lining Shall be With

Sulphate resistence Cement.

a) 150mm dia Pipe

b 200mm dia Pipe Rmt. 77.00 ₹ 2,239.00 ₹

c 250mm dia Pipe Rmt. 8800.00 ₹ 2,998.00 ₹

Lowering, laying and jointing C. I. S & S Spun pipes suitable for Tyton

joints / Mortar lined D. I. Pipes of various classes with CI / MS specials of

3 following diameters in proper position, grade and alignment as directed by Rmt. 90.00 ₹ 87.40 ₹

Engineer-in-charge including hydraulic testing etc. comp.

a) 150 mm dia pipe

b 200 mm dia pipe Rmt. 70.00 ₹ 113.85 ₹

c 250 mm dia pipe Rmt. 8000.00 ₹ 146.05 ₹

Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot

bends, tees, reducers or any other specials as per BS-EN-545/1995 Class-

A series K12 suitable for use with D.I. Pipes manufactured as per

IS:8329/1994delivery of specials is to be made site of works any where in

Gujarat including all taxes, loading, unloading, carting, stacking,

insurance, inspection charges, octroi etc. complete.

Socket & Spigot Type

For 80 to 300mm dia

Sr No Description Unit Quantity Rate Amount

Refilling the pipeline trenches incl. ramming, watering, consolidating

desposal of surplus stuff as directed within a radius of 3 km

Providing and supplying ISI mark CI D/F Sluice valves , butterfly valves &

Reflux valves of following class and diameter including all taxes,

insurance, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to departmental stores, stacking etc.

comp. Sluice valves as per IS - 780 & 2906 1984/ BF Valve IS 13095 with

P.N.1.6 with hand wheel/cap operated (PD type short body)

Providing and supplying and fixing C.I. Temper proof Air valves with SS

304 Float gun metal- nozzle of approved make & quality of following class

and diameter including all taxes, insurance, transportation, freight

7 charges, octroi, inspection charges, loading, unloading, conveyance to Nos. 16.00 ₹ 16,016.00 ₹

departmental stores, stacking etc. complete.

With Isolating Sluice Valve PN

Lowering, laying and jointing in position following C. I. / D/F Reflux valves,

Butterfly valves, Sluice valves including cost of all labour, jointing

material, including nut bolts and giving satisfactory hydraulic testing, etc.

i) Air Valve Double Ball Flanged

For Sluice Valve

ii) P.N.1.6 with hand wheel/cap operated (PD type short body) Nos. 1.00 ₹ 672.75 ₹

Sr No Description Unit Quantity Rate Amount

Erection of air valve riser by installing new M.S pipe of 6mm thick and

3.2mt length with necessary fittings such as flange of appropriate size,nut

bolts and embeded the pipe in R CC M:15 with offset of 10 cm around

pipe with necessary steel etc complete

Air valves double ball Flanged

Construction of valves chambers in brick or bela stone masonry, locally

available in C. M. 1:6. Foundation concrete 150 mm thick in C. C. 1:4:8 of

trap metal size 25 mm to 40 mm thick, inside cement plaster in C. M. 1:3

and cement pointing outside in C. M. 1:3 and top cover of precast RCC

slab 100 mm thick (with key hole in two parts, each with handles or MS

Bar etc. complete as given size) Upto 1 Mt. depth from G. L. to pipe invert

level incl. complete civil works but excl. cost of excavation and refilling,

with cast in situ RCC slab in one single piece with fixing of CI-MH Frame

and cover (excl. cost of CI-MH Frame and cover) with 23 mm thick brick

masonry wall in C.M.1:6 WIth precast RCC slab in two piece, 15mm thick

ii For 0.5 m extra Depth Nos. 2.00 ₹ 6,996.60 ₹

iv For 0.5 m extra Depth Nos. 17.00 ₹ 5,150.85 ₹

Providing C.C.M.:100 for encasing pipes using trap metal size 12 mm to

11 50 mm incl. form work curing consolidation etc. complete for various Cum 172.00 ₹ 4,730.87 ₹

location on pipe line. using trap metal 20 mm nominal size

R.C. C. PIPE (Horizontal Cast)

Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting

Cement) in standard lengths of following class and diameter suitable for

either collar joints or rubber ring joints including all taxes, insurance,

transportation. freight charges, octroi,inspection charges,

12 loading,unloading, conveyance to departmental stores, stacking etc. Rmt. 300.00 ₹ 663.00 ₹

Note: One collar should be supplied with each full length plain ended RCC

pipe, cost included in rates below. One rubber ring should be supplied

with each full length socketed pipe,costincluded in rates below.

Class NP2 Test Pressure 0.7 Kg/sq.cm (For River Crossing)

Sr No Description Unit Quantity Rate Amount

L,L& J of R.C.C. Pipes

Lowering, laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of following

diameters in proper position, grade and alignment at all level as directed

13 by engineer in charge including conveyance from stores to site of work, Rmt. 300.00 ₹ 174.80 ₹

labour, giving hydraulic testing as per ISl code.

Class NP2,NP3,NP4

Drilling of 600mm dia Horizontal borehole for watermain pipeline crossing

under the road incl in all strata with requried length incl fixing of 500mm

dia M.S/RCC casing pipe with pushing etc complete various size of pipe

for 273.3 to 365.8 mm dia (For 45 mt Length)

Without Water main & withMS Casing Pipe-500 thick:8

Highway Crossing- 250 MM Dia

Road Reinstitment for RCC / CC Road : Providing and laying cement

concrete 1:3:6 ( 1: Cement : 3- Coarse Sand : 6- hand broken stone

aggregates 40mm nominal size) and curing complete excluding cost of

formwork in (A) Foundation & Plinth including Box cutting the road

surface to proper slope and camber for making a base for road work

including removing the excavated stuff and depositing on the road side

slope as directed upto any lead with Providing and laying cement concrete

M250 and curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in

( A ) Foundation, footing, Base of Columns and mass concrete including

Providing & Laying M,S,Side Rail of road thickness with necessary nut

bolt plates fixing as per width, applying plate vibrator,electric or diesel in

channel.Comp. with V.D. system (Trimix) by using the all necessary

equipments & materil & machinery,such as running screed vidrator on

prelaid M.S.channel for levelling vaccum pumps, floating & power

trovelling etc.Complete

Sr No Description Unit Quantity Rate Amount

Road Reinstitment of Ashphalt Road : Preparing surface by Brushing with

wire brushes for removing caked mud etc, Construction of 200mm thick

Granular Sub Base (Grading I) by providing coarse graded Black Trap

material, mixing by machanical means / rotavator, spreading in uniform

layers with motor grader as per required slope and gradient on prepared

surface and compacting with vibratory roller at OMC to achieve the

desired compaction complete as per MORT & H clause 401,Providing &

laying spreading and compacted stone aggregate to wetmix macada

cm th. As per sprecification including premixing with water in machinemix

plant, carrige on road materals by tripper laying in uniform layers with

paver, base of coarse vibretor roller to the face and vibreter achive the

dry., Providing and applying PRIMER COAT with bitumen emulsion using

emulsion pressure distributor at the rate of 0.75 kg/sqm, Providing &

17 Laying 37.50 mm thick Bituminous Macadam with B.T. Aggregate as per sqmt 500 ₹ 2,013.00 ₹

MORT & H specification & asphalt grade (VG-30/60-70) for tack coat @

2.5 Kg. / 10 Sq.m. on B.T surface With Mechanical Sprayer & Bitumen

Grade (VG-30) for mixing @ 34.00 Kg. / M.T. i.e. 3.40 % of total weight of

mix including heating & mixing the aggregate & asphalt in drum mix

plant,Providing and Laying 25 mm thick Semi Dense Bituminous Carpet

(Seal Coat) with B.T. aggregate as per M.O.R.T. & H. gradation and

bitumen grade ( VG-30 ) for mixing @ 50.00 Kg/M.T. i.e. 5.0% by weight

of total mix including heating & mixing the aggregate and asphalt by of

drum mix plant and spreading the same by paver finisher and

consolidation with power roller, Providing & Applying Ashphalt pinting by

spraying asphalt 80 / 100 grade of 5.00 kg / 10 smt. & than spreading

sand at a rate 0.03 cmt / 10 smt. Including preparing surface heating

asphalt etc. complete as directed

Sr No Description Unit Quantity Rate Amount

Full Bore Electromagnetic Flow Meter (Regular Power Operated)- PN

Design, Supply, Installation, Testing, Commissioning of Full Bore

Electromagnetic flow meter with factory calibrated, Regular Power

Operated, flanged connection, Flow sensor, Indicator, transmitter and

totaliser with all accessories viz.surge arrestor, associated cables,

cabinets, hardwares, etc complete as per following specifications: Flow

Meter/ Sensor: DC pulsed type, IP 68 Protection, Flanged process

connection as per IS 1538 or equivalent standard, SS304/ Metllic Alloy

Flow Tube, SS316/ SS 316 L/ Hastelloy Sensor, SS316/ Hastelloy

Grounding Ring/ Inbuilt Grounding Electrode, Neoprene / Polyurethane/

Hard Rubber/ Rilsan lining, SS304/ Die Cast Aluminium/ Carbon steel with

18 Anticorrosive Paint Coil Housing with Junction Box, CS flanges. Flow No 1.00 ₹ 1,15,377.00 ₹

Transmitter/ Converter ( Remote Field Mounted): Microprocessor based,

Modular design, 2 line LCD for indication of actual flow rate, forward,

reverse, sum totaliser display, ±0.5% accuracy at 0.3 to 4 m/sec velocity,

4 to 20 mA with HART/Modbus output, one scalable pulse, one status

output, IP 67 protection, Die cast aluminium/ polycarbonate/ SS316 with

Anticorrosive Paint/ PU finish with glass window enclosure, Inbuilt

EEPROM and Data Logger, 20 meters cable length for sensor to

transmitter communication etc alongwith wall mounted/ stand mounted

cabinet. Full Bore Electromagnetic Flow Meter (Regular Power Operated)-

a) 150 mm Nominal Bore

b 200 mm Nominal Bore No 1.00 ₹ 1,43,211.00 ₹

Schedule B2_Water Treatment Plant

Sr No Description Unit Quantity Rate Amount

Conventional WTP(Description ofItem forturnkey Tender)

Conventional Water Treatment Plant : Designing (hydraulic, process, structural and aesthetic),constructing and commissioning Conventional Water

Treatment Plant consisting of all Civil, Mechanical and Electrical components of various sub-works as given below including necessary hydraulic

testing, structural testing, equipment testing, trial run for 3 months, etc. complete as directed by Engineer-in-charge (turn-key job). The Design shall

confirm to IS/CPHEEO Manual

1.1 Aeration Fountain/Cascade Aerator/ Inlet Chamber

1.2 Ventury Flume/Partial flume - With necessary flow measuring devices/meter consisting of mechanical/digital indicator

1.3 Flash Mixer - Rapid mixing device design confirming to IS : 7090 of 1985.Detenion time 60 seconds, velocity gradient 300-400 sec-1 with fans gear

and motor assembly as per design.

1.4 Flocculate - Design confirming to IS : 7208 – 1974 (Type-C). Detention period 30miutes with flocculator paddles or other suitable mechanism with

gear and motor assembly as per design.

1.5 Clarifier - Circular tank with horizontal flow pattern, detention period 2.5 hours, overflow rate 30 cubic meter per square meter per day (to be

specified), Weir loading not more than 300 cubic meter per meter per day, with mechanical sludge scraper confirming to IS : 10313 – 1982 and bridge

as per design with gear and motor assemblies.

1.6 Rapid Sand Filters and Filter House. Filter designed for filtration rate of 6,000 litres per square meter per hour, minimum 2 beds for plant up to

MLD, for larger plants as specified, pipe gallery and platform minimum 5.5 meter in width. a) Filter Media - Effective size 0.45 to 0.70 mm, uniformity

coefficient not more than 1.7 nor less than 1.3, depth of sand 0.75 M, free board 50 cm, gravel 0.45 M in depth, sand and gravel confirming to IS :

(i) – 77, backwash by air wash(if specified) and hard wash by water, standard appurtenances (to be specified), rate of flow controller, filter gauge, sand

expansion gauge, etc., b) Wash Water Tank -Wash water tanks of capacity equal to 2% of designed quantity of filtered water in a day (+) 10% with 8 to

10 head (as specified) wah water tank shall be constructed on RCC column/slabs only. c) Wash Water Pumps - Capacity to fill water tank in 1 hour with

100% standby. d) Air Blowers - Capable of delivering 600 LMP per square meter of free air, of filter area with pressure@ 0.4 kg/square cm at the

underdrains (100% standby). e) Valves/gates - Inlet, outlet ,wash water inlet –outlet and all types and sizes of valves /gates as per design (MOC of gate

shall be CI). f) Gauges/meters - All types gauges and meters required for filter operations and backwashing etc. as per design of specified make/brand.

1.7 Chemical House in Two Storyes (floor wise area as specified). RCC framed structure with brick masonary infill walls. ground floor and first flour area

as per data/specifications shall be provided. Minimum clear head room for doors, pessages, galleries etc. shall be 2.10 m. it shall be 2.40 m in case of

Alum dosing tank. Ground floor to accommodate 90 days alum requirements and a) Sundry storage, b) First floor to accommodate alum and lime

tanks, etc., c) Solution Tanks. Minimum 3 tanks (one for preparation, second for dosing and third as standby), each tank capable of giving 8 hours

maximum dose without interruption, minimum free board 0.30 M, trays for dissolving, level indicator, mechanical agitation devices, solution feed and

drain lines, solution feed device (constant head device, strength of solution up to 10% only) confirming to IS : 9222 Part – 1/1979

1.8 Store House (area as specified) - Suitable for alum storage of three months requirement in monsoon with 10% extra capacity for other sundry

1.9 Vacuum feed type Chlorinators – make to be specified and approved by GWSSB. a) Confirming to IS : 10533 – A Part – 2/1983.

1.10 By pass arrangements- for Inlet to CCT, Clarifloculator to Filte bed through channel & Filter feed channel to CCT C.I. or M.S. ppes as specified) of

size as per design. Drainage arrangements RCC pipes up to plot boundary (as specified ) diameter as per design. (Backwash drain with RCC pipe to

plant boundery Or to recirculation sump), (Clarifloculator sludge removing drainwithRCC pipe)

1.11 Electric installation - Both internal and external including entire plant area (as specified)

1.12 Laboratory equipments - As perrequirement(to be specified duringtendering).

1.13 Sanitaryblocks - Sanitary Block Area 15 square meter minimum up to 25 MLD and 25 square meter abOve 25 MLD (or as specified).

1.14 Administrative block and internalroads. - To accommodate office room, chlorine room, laboratory room panel board room, blower room etc. and

asphalt road to connect all units from main gate of plot.

1.15 Devwatering duringentire work using any technique.

1.7 Chemical House in Two Storyes (floor wise area as specified). RCC framed structure with brick masonary infill walls. ground floor and first flour area

as per data/specifications shall be provided. Minimum clear head room for doors, pessages, galleries etc. shall be 2.10 m. it shall be 2.40 m in case of

Alum dosing tank. Ground floor to accommodate 90 days alum requirements and a) Sundry storage, b) First floor to accommodate alum and lime

tanks, etc., c) Solution Tanks. Minimum 3 tanks (one for preparation, second for dosing and third as standby), each tank capable of giving 8 hours

maximum dose without interruption, minimum free board 0.30 M, trays for dissolving, level indicator, mechanical agitation devices, solution feed and

Sr No drain lines, solution feed deviceDescription Unit only) confirming

(constant head device, strength of solution up to 10% Quantity Rate

to IS : 9222 Part – 1/1979 Amount

1.8 Store House (area as specified) - Suitable for alum storage of three months requirement in monsoon with 10% extra capacity for other sundry

1.9 Vacuum feed type Chlorinators – make to be specified and approved by GWSSB. a) Confirming to IS : 10533 – A Part – 2/1983.

1.10 By pass arrangements- for Inlet to CCT, Clarifloculator to Filte bed through channel & Filter feed channel to CCT C.I. or M.S. ppes as specified) of

size as per design. Drainage arrangements RCC pipes up to plot boundary (as specified ) diameter as per design. (Backwash drain with RCC pipe to

plant boundery Or to recirculation sump), (Clarifloculator sludge removing drainwithRCC pipe)

1.11 Electric installation - Both internal and external including entire plant area (as specified)

1.12 Laboratory equipments - As perrequirement(to be specified duringtendering).

1.13 Sanitaryblocks - Sanitary Block Area 15 square meter minimum up to 25 MLD and 25 square meter abOve 25 MLD (or as specified).

1.14 Administrative block and internalroads. - To accommodate office room, chlorine room, laboratory room panel board room, blower room etc. and

asphalt road to connect all units from main gate of plot.

1.15 Devwatering duringentire work using any technique.

1 2 followingconditions shallform a part and parcel of the tender

2.1 Filter house tiles should be glazed vitrified mat finish and tile on wall up to window sill. Around valve area granite flooring to be provided.

2.2 Allchannels shouldbe withinsidechinamosaic/epoxy coated.

2.3 All railing should be SS railing (SS 304) as per latest IS standard.

2.4 External paint should be of weather proof coating with primer and 3 coatpaint

2.5 Opening of window & door should be framed with granite. All platform for kitchen/laboratory shall be of granite and fixed in sandwich with bottom of

kota/white marble. All Window shall be of Anodised Aluminum section (1.2mm guage section) with wired glasses, also provided with grill

/jaali/laluminium weldmesh to prevent birds entry Doors shall be of anodised aluminum section(1.2mm guage of section) patial glazed and partial panel

with 4mm backelite sheet. Main entry door should be 2.0meter wide with 3.Omtr entry poarch.

2.6 Roof top of all unit of the WTP is approchable through staircase. All staircase of entire WTP should be RCC only.(No MS ladder or No MSStaircase)

2.7 Bathroom shOuld have shower facility

2.8 Chlorination neutralized pits(Lime pit) shall be made and mock dril practice for leakage neutralization to be carried out while commisSIoning

2.9 Fire safety equipment with Safety kit.

2.10 At chlorination room safety mask and hand gloves, gum boots etc. should be available.

2.11 All vehicle access roads shall be of RCC and balance of Paver block type

2.12 Proper arrangement shall be made for storage of PAC solution and Alum with arrangment of vertical lifting of platform through guide rails operated

2.13 Proper sludge disposal arrangement shall be made with sludge drying beds

2.14 All building terrace shall be finished with high quality water proofing like china mosaic flooring with proper slope and drainage for rain water

2.15 IMinimum plinth height of filter house shall be 0.6 m. Also outlet channel RLshall be at plinth level

2.16 Clear walkway excluding column and valve operating valves shal be 1meter.

2.17 Air blower shall be placed on ground floor

2.18 Pipe gallery shallbe embedded in flooring

2.19 Inlet pipe from flash-mixture to Clariflocculator shall be epoxy coated.

2.20 Flooring of Loading area like tonner/alum store etc. shall be of Polished Kota stone flooring and open/other space shall be of paver block pitching.

Notes: 1)Conditions from Sr. No. 2 to 2.16 & 3.1 to 3.20 shall from a part and parcel of the tender and must be incorporated in draft tender papers of

conventional treatment plants. 2) Aeratormust be provided.3) Hydraulic design criteria approved by Technical committee shall |be referred and item

description shall be modified accordingly|(4) Structural design criteria approved by technical committee shll be applicablefordesign5) Design flow shall

be specified in M^3/hour in data sheet considering 22 hours WTP run time in a day to treat requirement water quantity of a day( i.e. 24 hours) of

population to be served with design rate of water supply. No separate overloading provision shall be kept in any tender clause (6) All other details shall

with 4mm backelite sheet. Main entry door should be 2.0meter wide with 3.Omtr entry poarch.

2.6 Roof top of all unit of the WTP is approchable through staircase. All staircase of entire WTP should be RCC only.(No MS ladder or No MSStaircase)

2.7 Bathroom shOuld have shower facility

2.8 Chlorination neutralized pits(Lime pit) shall be made and mock dril practice for leakage neutralization to be carried out while commisSIoning

2.9 Fire safety equipment with Safety kit.

Sr No 2.10 At chlorination room safetyDescription

mask and hand gloves, gum boots etc. should beUnit available. Quantity Rate Amount

2.11 All vehicle access roads shall be of RCC and balance of Paver block type

2.12 Proper arrangement shall be made for storage of PAC solution and Alum with arrangment of vertical lifting of platform through guide rails operated

2.13 Proper sludge disposal arrangement shall be made with sludge drying beds

2.14 All building terrace shall be finished with high quality water proofing like china mosaic flooring with proper slope and drainage for rain water

2.15 IMinimum plinth height of filter house shall be 0.6 m. Also outlet channel RLshall be at plinth level

2.16 Clear walkway excluding column and valve operating valves shal be 1meter.

2.17 Air blower shall be placed on ground floor

2.18 Pipe gallery shallbe embedded in flooring

2.19 Inlet pipe from flash-mixture to Clariflocculator shall be epoxy coated.

2.20 Flooring of Loading area like tonner/alum store etc. shall be of Polished Kota stone flooring and open/other space shall be of paver block pitching.

Notes: 1)Conditions from Sr. No. 2 to 2.16 & 3.1 to 3.20 shall from a part and parcel of the tender and must be incorporated in draft tender papers of

conventional treatment plants. 2) Aeratormust be provided.3) Hydraulic design criteria approved by Technical committee shall |be referred and item

description shall be modified accordingly|(4) Structural design criteria approved by technical committee shll be applicablefordesign5) Design flow shall

be specified in M^3/hour in data sheet considering 22 hours WTP run time in a day to treat requirement water quantity of a day( i.e. 24 hours) of

population to be served with design rate of water supply. No separate overloading provision shall be kept in any tender clause (6) All other details shall

be as per design criteria and detail specifications.7) The following rates are for sites falling in seismic zone ll for sites falling in zone IV and V rates shall

be increased 5% and 8 % respectively8) The rates includes excavation ,refilling and throwing away extra stuff at alllead.(9) The following rates are for

preliminary or rapid estimate ofWTP

For 3 MLD WTP at Jamjodhpur HW Each 1 ₹ 47,41,456.90 ₹

Schedule B3_Clear Water Gravity Main Proposed WTP to Existing Sump

Sr No Description Unit Quantity Rate Amount

Excavation for pipe line trenches for water supply, sewerage line, manhole

etc. all with shoring and struting if required as per required gradient and

line including safety provisions using site rails and stacking excavated

1 stuff including up to all required lead cleaning the site etc. complete for all Cum 488.00 ₹ 102.35 ₹

lifts and strata as specified.

i) 0.0 to 1.5 mt depth.

a) In all sorts of soil and soft murrum

b In hard murrum, boulders incl. macadam road. Cum 122.00 ₹ 155.25 ₹

Providing and supplying D. I. K-7 grade pipes for following nominal bore

diameter with internal cement mortar lining including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading,

2 unloading, conveyance to departmental stores, stacking etc. complete. (IS Rmt. 330.00 ₹ 3,110.00 ₹

8329-2000). Rate for DI pipe based on Wholesale Price index of Pig Iron

as 157.60 for the month of Dec-2022.

a) 300 mm dia pipe

Lowering, laying and jointing C. I. S & S Spun pipes suitable for Tyton

joints / Mortar lined D. I. Pipes of various classes with CI / MS specials of

3 following diameters in proper position, grade and alignment as directed by Rmt. 300.00 ₹ 178.25 ₹

Engineer-in-charge including hydraulic testing etc. comp.

Refilling the pipeline trenches incl. ramming, watering, consolidating

desposal of surplus stuff as directed within a radius of 3 km

Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot

bends, tees, reducers or any other specials as per BS-EN-545/1995 Class-

A series K12 suitable for use with D.I. Pipes manufactured as per

IS:8329/1994delivery of specials is to be made to site of works any where

in Gujarat including all taxes, loading, unloading, carting, stacking,

insurance, inspection charges, octroi etc. complete.

Socket & Spigot Type

For 80 to 300mm dia

Sr No Description Unit Quantity Rate Amount

Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846

(Latest Edition) of following class and diameter including all taxes,

insurance, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to departmental stores, stacking etc.

P.N.1.0 with hand wheel/cap operated (PD type short body)

Lowering, laying and jointing in position following C. I. / D/F Reflux valves,

Butterfly valves, Sluice valves including cost of all labour, jointing

material, including nut bolts and giving satisfactory hydraulic testing, etc.

7 complete. Nos. 4.00 ₹ 1,087.90 ₹

P.N.1.0 with hand wheel/cap operated (PD type short body)

Construction of valves chambers in brick or bela stone masonry, locally

available in C. M. 1:6. Foundation concrete 150 mm thick in C. C. 1:4:8 of

trap metal size 25 mm to 40 mm thick, inside cement plaster in C. M. 1:3

and cement pointing outside in C. M. 1:3 and top cover of precast RCC

slab 100 mm thick (with key hole in two parts, each with handles or MS

Bar etc. complete as given size) Upto 1 Mt. depth from G. L. to pipe invert

level incl. complete civil works but excl. cost of excavation and refilling,

with cast in situ RCC slab in one single piece with fixing of CI-MH Frame

and cover (excl. cost of CI-MH Frame and cover) with 23 mm thick brick

masonry wall in C.M.1:6 WIth precast RCC slab in two piece, 15mm thick

b For 0.5 m extra Depth Nos. 4.00 ₹ 3,498.30 ₹

Sr No Description Unit Quantity Rate Amount

Road Reinstitment for RCC / CC Road : Providing and laying cement

concrete 1:3:6 ( 1: Cement : 3- Coarse Sand : 6- hand broken stone

aggregates 40mm nominal size) and curing complete excluding cost of

formwork in (A) Foundation & Plinth including Box cutting the road

surface to proper slope and camber for making a base for road work

including removing the excavated stuff and depositing on the road side

slope as directed upto any lead with Providing and laying cement concrete

M250 and curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in

( A ) Foundation, footing, Base of Columns and mass concrete including

Providing & Laying M,S,Side Rail of road thickness with necessary nut

bolt plates fixing as per width, applying plate vibrator,electric or diesel in

channel.Comp. with V.D. system (Trimix) by using the all necessary

equipments & materil & machinery,such as running screed vidrator on

prelaid M.S.channel for levelling vaccum pumps, floating & power

trovelling etc.Complete

Providing bedding incl. ramming, watering, levelling, consolidating etc.

10 Complete as per standard and instruction of engineer incharge Cum 15.00 ₹ 69.00 ₹

As above with selected excavated earth available near site

Schedule B4_Compound wall with Gate

Sr No Description Unit Quantity Rate Amount

Construction of compound wall in B.B. Masonary in C.M. 1:6 with R.C.C.

columns at 3.0 m c/c & R.C.C. Beam below G.L. ( Including

reinforecement) with 15 mm thick Cement plaster to all exposed concrete

and masonary structure and embeding broken glass pieces at top in

coping of compound wall including excavation in all strata, P.C.C., form

work for R.C.C. work, plastering, cement paint clearing the site etc.

complete as per the detailed drawing attached.

Fulzar Dam H.W.

Providing & Fixing Iron gates for compound wall of required size &

specification as per the drawings with 2 No of R.C.C. column size 0.45 x

0.45 m ( including reinforcement) with 15 mm thick cement plaster to all

exposed surface including excavation in all strata, P.C.C., form work for

R.C.C. work , painting to all Iron exposed surfaces( incl. brusing

cleaning & priming coat ) and cleaning the site etc. the site etc. complete

as per the detailed drawing attached.

Fulzar Dam H.W.

Schedule B5_Security Cabin

Sr No Description Unit Quantity Rate Amount

Excavation for foundation for loose and soft soil including sorting out and

stacking of useful materials and disposing of the excavated stuff up to

a) From 0.0 to 1.5 m.

Add extra for Disposing off the excavated stuff of above items for lead of

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand :

3 6- hand broken stone aggregates 40 mmnominal size) and curing Cum 11.01 ₹ 2,957.89 ₹

complete excluding cost of formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete M.200 and curing

complete excluding the cost of formwork and reinforcement for reinforced

concrete work in (A) foundations, footings, Base of columns and Mass

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level

Brick work using common burnt clay building bricks having crushing

6 strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Cum 30.9741 ₹ 4,388.47 ₹

Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto floor

two level and finished even and smooth in (i) Cement mortar 1:3 (1-

20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

9 L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey Sqmt 34.80 ₹ 965.59 ₹

cement slurry mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete

Sr No Description Unit Quantity Rate Amount

Distempeing (Two coats) with oil bound distemper of approved brand and

manufacture and of required shade on wall surfaces to give an even

shade, over and including a priming coat with distemper primer of

approved brand and manufacture after thoroughly brushing the surface

free from mortar dropping and other foreign matter and also including

preparing the surface even and sand papered smooth.

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP

shutter with wood grain raised panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The core of the shutter

& frame is to be filed up with injected polyurethene foam done in situ

13 alongwith embedded wooden pieces for stiffening & also taking hinges & Sqmt 7.56 ₹ 2,019.98 ₹

fintures. The whole FRP frame & shutter is to be water proof weather

proof, termite proof & resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with fastener sleeve & alluminium fixtures &

Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 95mm x 24mm x 1.17mm @ wt.of

Kg/mt , horizontal Three track member size 92mm x 31.75mm x

1.30mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal member size

40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size

40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as

per details etc

15 Providing fixing Rain water Downtake pipe 110 mm dia UPVC 6 Kg ISI Rmt 18.00 ₹ 205.00 ₹

General Plumbing Cost including providing Basic Pipeline of UPVC 50mm

16 dia with 6 point connections and over head tank of 1000 lit of Sintax or Job 3.00 ₹ 20,000.00 ₹

equivalent make and 6 brass tap connection etc complete..

Cleaning & grubbing road land including uprooting rank vegetation grass

bushes,shrubs,sapling and tress girth upto 300 mm removal of stumps of

tress cut earlier and disposal of unserviceable material by Mechanical

means in area of light jungle

Sr No Description Unit Quantity Rate Amount

Providing Fixing Commisioning 20 nos Point Wiring 3 Nos Ceiling Fans,

NosTube Lights 2 Nos 6x3 and 4 nos 1X 7 Modular switch board Plug with

Modular switch Board with required set of Wiring and external water proof

lighting. Including metering installation and supply charges.

Schedule B6_Pump House

Sr No Description Unit Quantity Rate Amount

Designing(aesthetically) and constructing pumproom with positive

suction and Negative suction With Gantry (Min. Height 4.5 M) Upto

M plinth level to top slab beam bottam

1. Minimum 15 % opening for ventilation should be provided.

2. Pump room rolling shutter, door and windows of aluminium section and

window grill of iron should be provided (Included in Cost).

3. Plinth level of Pump house should be min.1 meter above GL.

4.Cost does not include foundation for pumping machinery.

a) At Fulzar Dam HW (Size of Pump House 12 mt x 14 mt. (12 X

Schedule B7_Jamjodhpur WSS Pumping Machinary for Fulzar Dam to Existing & Proposed WTP(Mech)

Sr No Description Unit Quantity Rate Amount

Borewell Submersible Pump Sets:

Supply, Installation, Testing & Commissioning (SITC) of Electric motor

driven borewell submersible pump set confirming to IS 8034 and motor

1 confirming to IS 9283 working at 3 phase 400 / 440 volt 50 Hz AC supply Nos. 4.00 ₹ 42,518.00 ₹

& 2900 RPM. etc. as per relevant IS and Specification.

Rating: Minimum 30 KW, Capacity: 1150 LPM, Head: 62 mtrs. (2W+ 2S) -

Category No.: 9.0 - Fulzar Dam to Existing & Proposed WTP

Lowering of openwell Horizontal Submersible pump sets/bore well pump

sets in Well/Sump with HDPE pipe/GI/MS column pipe by means of chain

pulley block/fixture & jointing the cable with fuse unit / Control panel board

including fitting accessories & making it in working condition including

satisfactory testing.

Sluice Valve - PD Type - Short Body (PN - 1.6):

Supply, Installation, Testing & Commissioning (SITC) of ISI mark CI D/F

Sluice Valve as per IS 14846 PN 1.6 with Manually / Gear operated of

following sizes with SS 304 seat rings, SS rising spindle with all hot

dipped galvanised hardwares, bolts, nuts & washers, gaskets including all

taxes, insurance, transportation, freight charges, Inspection Charges,

loading unloading, conveyence to pump house, stacking, security etc.

complete as per IS and Specification.

Size: 250 mm NB (Gear Operated - On Header) - Fulzar Dam to Existing

Size: 100 mm NB (Gear Operated - On Delivery of each Pump) - Fulzar

Dam to Existing & Proposed WTP

Lowering, laying and jointing in position following C. I. I D/F Reflux valves,

Butterfly valves, Sluice valves and Air valves including cost of all labour,

jointing material, including nut bolts and giving satisfactory hydraulic

testing, etc. complete.

Size: 250 mm NB (Gear Operated - On Header) - Fulzar Dam to Existing

Size: 100 mm NB (Gear Operated - On Delivery of each Pump) - Fulzar

Dam to Existing & Proposed WTP

Sr No Description Unit Quantity Rate Amount

Refulx Valve (PN - 1.6):

Supply at Site, Storage, Installation, Testing & Commissioning (SITC) of

ISI mark CI D/F Refulx valve as per IS 5312 (Latest Edition) of following

class and diameter including all taxes, insurance, transportation, frieght

5 charges, octroi, inspection charge, loading Un-loading, conveyence to Nos. 1.00 ₹ 27,830.00 ₹

departmental stores, stacking etc. complete. to be installed on Delivery

Side Pipe as per specifications.

Size: 250 mm NB (Header Side) - Fulzar Dam to Existing & Proposed

Size: 100 mm NB (Delivery Side) - Fulzar Dam to Existing & Proposed

Lowering, laying and jointing in position following C. I. I D/F Reflux valves,

Butterfly valves, Sluice valves and Air valves including cost of all labour,

jointing material, including nut bolts and giving satisfactory hydraulic

testing, etc. complete.

Size: 250 mm NB (Gear Operated - On Header) - Fulzar Dam to Existing

Size: 100 mm NB (Gear Operated - On Delivery of each Pump) - Fulzar

Dam to Existing & Proposed WTP

EXPANSION BELLOWS (PN - 1.6):

Supply, installation, testing & commissioning (SITC) of flange ends

Expansion Bellow as per EJMA standards of overall length of minimum

300 mm, designed for 15 mm axial compression and 5 mm axial

extension with tie rods etc. of following MOC & pressure ratings.

MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304;

Weldends: IS 2062 Gr. B; Flanges: IS 2062 Gr. B (Drilling as per IS 1538 /

IS 6392 ) & Limit Rods & Nuts: CS - IS 1367. As per detail specification.

Size: 250 mm NB- on (Header Side) - Fulzar Dam to Existing & Proposed

WTP ( Header Side for Valve + For Flow meter)

Size: 100 mm NB- on (Delivery Side) - Fulzar Dam to Existing & proposed

Sr No Description Unit Quantity Rate Amount

AIR VALVE (PN - 1.6):

Supply, Installation, Testing & Commissioning (SITC) of CI Tempor proof

Flanged double acting kinetic Air Valve with Isolation Sluice Valve as per

IS 14845 PN - 1.6 & IS - 14846 PN - 1.6 respectively with SS304 float,

gun metal nozzle, complete hardware's, bolts, nuts & washers, gaskets

8 etc. including all taxes, Insurance, Transportation, freight charges, Nos. 1.00 ₹ 16,016.00 ₹

Inspection charges, loading, unloading, conveyance to departmental

stores, stacking, security etc. as per IS and Specification. As per detail

Size: 80 mm NB - PN 1.6 (On Header line outside the Pump house) -

Fulzar Dam to Existing & Proposed WTP

Lowering, laying and jointing in position following C. I. I D/F Reflux valves,

Butterfly valves, Sluice valves and Air valves including cost of all labour,

jointing material, including nut bolts and giving satisfactory hydraulic

testing, etc. complete.

Size: 250 mm NB (Gear Operated - On Header) - Fulzar Dam to Existing

Manufacture, Supply & Delivery of Electric Resistance Welded (Up to

400mm)/Submerged Arc Welded(Above 400mm) M.S.Pipe having

beveled ends plate or coil conforming to IS-3589-2001 or its latest

revision/ ammendment for following thickness outside diameter at

GWSSB store or site anywhere in Gujarat State including all taxes,

insurance, transportation, freight charges, octroi, inspection charges,

10 loading, unloading conveyance to Departmental stores, stacking etc. all Rmt 50.00 ₹ 2,336.00 ₹

complete. (Rate for MS Pipe based on the ex. works price of HR Coil as

Rs.58500 per MT - withouth GST (Above 3.15 mm to 10 mm) & Rs.

59000.00 per MT without GST (Above

mm) as onJan-23.( WPI Index of H. R Coil of Dec-22 is 144)

Header Side: 250 mm dia. (5.0 mm thickness) - Fulzar Dam to Existing &

Lowering, laying, Jointing & welding in position to correct line & level M.S.

Pipe with outer gunniting & inside lining/Epoxy painting on pedestal or

chairs upon prepared formation or prepared bedding in trenches the rates

11 include conveyance from store to site of work loading, unloading, joint Rmt 50.00 ₹ 251.00 ₹

plastering, hydrotesting etc.complete.

Header Side: 250 mm dia. (5.0 mm thickness) - Fulzar Dam to Existing &

Sr No Description Unit Quantity Rate Amount

Supply, Installation, Testing & Commissioning (SITC) of MS fabricated

specials with both side flanges like Blind flange, Elbow, Eccentric /

Cocentric tapers, bends, Y Joints, Flanges, ductfoot bend, Puddle pipe,

12 Bell mouth, Tee joint, Reducers, Nut - Bolt, Gaskets Etc. of required size Kgs 2130.00 ₹ 98.00 ₹

& in required quantities as per relevant IS for suction, delivery & header

Delivery Side: 100 mm dia. (4.5 mm thickness)

Providing & laying reinforced cement concrete in Thrust Block / Pipe /

Valves Supports etc. with tar steel black trap kapchi as coarse aggregate

for raft, grillage footing inclusive providing binding necessary size TMT

steel bar with centering form work, consolidating as per directive in 1:2:4

13 For SITC Civil SOR 2022-23 Part-1 C1(RCC), Item No. 3 (2) Page No.43 Cu. Mtr. 15.00 ₹ 8,566.40 ₹

Rs. 4906.00 Cum with form work by adding Tar steel bar 50 Kg./ cum

(Civil SOR 2022-23 Part-1 C1(RCC) Item. No. 3 (2) Pg. No. 43 Rs.

4906.00 Cu. M. with Foam work by adding Tar Steel, bara 50 Kg. CuM @

Civil SOR 2022-23 Pg. 45 Item. No. 9.2 comes to 50 Kg. X Rs. 73.208 =

Rs. 3660.4 + 4906.00 = Rs. 8566.4 per CuM) for duty point.

Schedule B8_Jamjodhpur WSS Pumping Machinary for Fulzar Dam to Existing & Proposed WTP(Ele)

Sr No Description Unit Quantity Rate Amount

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V, having normal current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.

250 AMP cat-III

11kV Ring Main Unit (RMU)

Supply, installation, testing & commissioning Indoor type 11 KV, 630 Amps. 21 kA for 3 second

SF6 type extensible and motorized 5 way smart Ring Main Unit (RMU) complete with (2 VCB +

3 LBS) with FRTU and FPI as per IS

11 kV Two Pole Structure Assembly:

SITC of 11 kV double pole 9 meter high structure made of 6" X 3" 'I" section girder, 4" X 2"

channels, clamps, nuts, bolts, stay wires including earthing system with following accessories

duly connected with ACSR conductors as per approved drawing & in compliance with

requirement of IEC.

(a) 11 kV, 200 A drop out fuses with Synthetic Resin Bonded Paper (SRBP) tubes: 1 Set (01

piece per phase).

(b) 11 kV, 400 A G.O.D. switch complete with earth switch, insulators, operating handle with

galvanised pipe, square bar: 1 Set.

(c) 11 kV lightning arrestor with clamps: 3 Nos.

(d) 11 kV Disc Insulators (70KN): 3 Nos.

(e) 11 kV Pin Insulators (5KN): 3 Nos.

(f) 20 mm dia. GI Stay Sets Complete: 2 Set.

11 kV Double Pole Structure Assembly

Sr No Description Unit Quantity Rate Amount

SITC of outdoor type, three phase, oil immersed, distribution transformer of required KVA &

voltage ratio, copper double wound, vector group - Dyn11, HV delta connected & LV star

connected with neutral brought out connected to provide separate earthing terminals, bushing /

cable box on HV side and cable box on LV side suitable for cables or bus duct as per

requirement with standard fittings, conforming to IS: 1180 (Part-1) / 2014 with its latest

amendment including first fill of transformer oil & following accessories.

(a) Oil conservator with filling holes with cap and prismatic oil level gauge.

(b) Silica Gel dehydrating breather charged with silica gel

(c) Oil drain cum sampling valve with plug

(d) Oil filter valve

(e) Lifting Eyes / Hooks / Lugs

(f) Two earthing terminal

(g) Diagram and rating plate

(h) Air release plug

(i) Explosion vent with diaphragm

(j) Thermometer pocket

(k) Four bi-directional plain roller with base channel with hauling holes

(l) Fixed / Separate type radiator banks

(m) Off circuit externally operated tapping switch (For rating < 1000 kVA)

(n) 100 mm stem type oil temperature indicator (For rating < 500 kVA)

(o) Bucholtz relay with shut off valve (For rating ≥ 500 KVA)

(p) 150 mm dial type oil temperature indicator with Alarm / Trip contact (For rating ≥ 500 kVA)

(q) 150 mm dial type winding temperature indicator with Alarm / Tip contact (For rating ≥

(r) Marshalling box (For rating ≥ 500 kVA)

(s) 150 mm dia. magnetic type oil gauge (For rating ≥ 1600 kVA)

(t) Inspection cover & Jacking lugs (For rating ≥ 1600 kVA)

For transformer having oil storage capacity for 2000 liters and higher, nitrogen injection fire

Casting of transformer plinth / foundation including oil soak pit (where required) in situ

reinforced cement concrete in M 20 using granite, quartzite trap metal of size 6 mm to 20 mm

for RCC work including providing of 53 grade cement & Fe 415 grade TMT bars, scaffolding,

centering, form work, curing etc. complete.

RCC plinth / foundation for transformer of capacity ≤ 315 KVA. - Plinth Dimension -

LOW VOLTAGE (LT) PANEL BOARD (PMCC):

5 SITC of PMCC Panel (50kA) complete in all respects as per Specification / IS and Providing ₹ -

Common Panel including following as minimum:

Sr No Description Unit Quantity Rate Amount

LV POWER CONTROL CENTER (PCC): Supply, installation, testing and commissioning LV

Distribution Board (LVDB) totally enclosed, dust & vermin proof, indoor type, fabricated from

CRCA sheet steel with minimum thickness of 3 mm for base frame/ channel/ gland plates,

mm for load bearing members/ doors & 1.6 mm for internal partitions, minimum degree of

protection - IP 52 as per IS: 2147, suitable for operation on 3-Phase, 4 Wire, 415V, 50Hz,

Neutral effectively grounded, with instrumentation compartments accomodating meters, aux /

protective relays, LED type indicating lamps & control MCBs as per IS: 13947, current &

voltage transformers as per IS: 2705, air insulated electrolitic grade Aluminum/ Copper busbar

for three phase & neutral system, GI earth bus for entire length, power/ control wiring using

1100V grade, FRLS insulated copper conductor wires conforming to IS: 694 & 8130, equipment

fittings, horizontally running busbar compartment height of minimum 300 mm, incoming &

ougoing cable connections for 1100V grade, Aluminium/ Copper conductor XLPE/ PVC

insulated & PVC sheathed armoured cable. LVDB shall have required incomming of following

type & ratings.

Above 80 A, upto & including 250 A, 3 & 4 Pole, Air Break Fixed MCCB conforms to IS / IEC

60947-2 with trip free mechanism, current limiting type with Microprocessor release (O / C, S /

C & E / F) with adjustable settings & having minimum 2NO+2NC potential free auxiliary

contacts with all necessary Electro-Mechanical protections & interlocks etc. MCCB module,

Incommer shall have following technical features:

4 Pole, MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of

Icu), Microprocessor release

Control Panel Board with Auto Transformer Starter:

Auto transformer starter suitable for local & remote pump control application consisting of Auto

Transformer (vacuum impregnated, air cooled having three (3) tappings at 50%, 65% and

5.2 80%), incomer MCCB / MPCB, overload relay and contactors as per Type II coordination NOS 4 ₹ 33,403.00 ₹

including digital MFM with RS 485 communication port, analogue type ammeter with selector

switch, run hour meter, required protective relays & control accessories.

A. T. S. from 36 to 45 HP

LT Power Capacitor:

Supply, installation, testing & commissioning heavy duty APP type capacitor unit, vacuum

impregnated with non-PCB / non toxic oil, internally delta connected with built in internal fuses

complete with discharge resistances & terminal cover, rated for 440 V AC, 3 Phase, 50 Hz as

per IS: 13585 Part-1.

APP type Capacitor - 14 kVAR for each

Sr No Description Unit Quantity Rate Amount

Lighting Distribution Board (LDB) as under:

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of

6 same company of MCB to be used) suitable for Three phase incoming and single phase NOS 1 ₹ 5,086.44 ₹

horizontal type outgoing Per phase isolation type (PPI) single door 4 way Prewired Lighting

Distribution Board Suitable to house :

Incoming: 25A FP, ELMCB (30mA), Cat-III

Outgoing: 20A SP MCB (4 nos.), 16A SP MCB (4 nos.)

MEDIUM VOLTAGE CABLES

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable trench /

cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming

to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes:

3.5 c X 185 Sq.mm AL XLPE Armoured (For Two Pole Structure to RMU to Transformer to

MCCB Box to MCCB Panel)

6.1 3 Core x 25 Sqmm CU XLPE Armoured cable (For 30 KW) Four Motors MTR 300 ₹ 534.00 ₹

6.2 4 C x 4 Sq.mm CU XLPE Armoured (For LDB, Instruments and Other.) MTR 200 ₹ 141.00 ₹

CABLE END TERMINATION AND CONNECTION :

Providing & fitting heavy duty brass cable glands (nickel-plated) with washers & rubber ring

conforming to IS, suitable for 3, 3½ & 4 core cables of following type & sizes:

Double Compression Brass Cable Glands

3.5 c X 185 Sq.mm AL XLPE Armoured (For Two Pole Structure to RMU to Transformer to

MCCB Box to MCCB Panel)

6.4 3 Core x 25 Sqmm CU XLPE Armoured cable (For 30 KW) Four Motors Nos 8 ₹ 203.00 ₹

7 4 C x 4 Sq.mm CU XLPE Armoured (For LDB, Instruments and Other.) Nos 8 ₹ 107.00 ₹

Providing & fitting crimping type Cable Terminals (Lugs) conforming to IS of following types and

Aluminium Reducer Terminals (in Sq.mm.)

3.5 c X 185 Sq.mm AL XLPE Armoured (For Two Pole Structure to RMU to Transformer to

MCCB Box to MCCB Panel)

7.2 3 Core x 25 Sqmm CU XLPE Armoured cable (For 30 KW) Four Motors Nos 24 ₹ 24.00 ₹

7.3 4 C x 4 Sq.mm CU XLPE Armoured (For LDB, Instruments and Other.) Nos 32 ₹ 8.00 ₹

Sr No Description Unit Quantity Rate Amount

Maintenance free Chemical Earthing

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe

dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover. (A)(approved

make OEM has to submit test certificate including value of earth resistance of installation duly

7.4 stamped and signed by agency and officer Incharge has to ensure the value of earthing Nos 4 ₹ 4,544.92 ₹

resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:-

< 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time Necessary test report must be

submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg. (for LT panel and Pump)

INTERNAL WIRING:-

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

8 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green MTR 20 ₹ 76.27 ₹

colour for earth continuity of following size

with medium class Rigid PVC pipe and accessories

Main wiring with 3 wire 1.5 Sq.mm

Supply,Installation,Testing and Commissioning of Main wiring with 3 wire 2.5 sq. mm as per

tender specification / IS

INTERNAL POINT WIRING:-

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell push & accessories and earth

9.1 continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base NOS 7 ₹ 414.41 ₹

frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete. cat-III

Sr No Description Unit Quantity Rate Amount

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type

of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling

as per pipe erected with following type of accessories.

For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu.

With medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete.

Point wiring for Individual Plug with earthwire of 1.5 sq.mm (Green) both are of ISI marked

1.1kV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected

concealed in/ on surface of wall/ ceiling complete with Modular type switch & 5 pin Plug erected

on PVC/ Metallic box covered with appropriate front plate modules erected on/ in wall/ ceiling

as per pipe erected with following type of accessories.For 16A Plug with 2-2.5 sq.mm Cu. Wire

with medium class Rigid PVC pipe and accessories.Cat. - III

LED LIGHT FIXTURES:

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

Luminaire efficacy> 85 lumens/watt ,LED efficiency-110 lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux make LED used for

luminaire. ( fitting required LM-79 & LM-80 Certificates)

Tube Light with integral/ nonintegral driver

22-24 Watts, Surge - 2KV,IP-20, 4 feet, Cat-III

Sr No Description Unit Quantity Rate Amount

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with

10 condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing hook or Set 1 ₹ 1,580.51 ₹

clamp with earthing. [Make shall be approved by Engineer in charge]

EXTERNAL LIGHTING:

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than

10.1 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 NOS 2 ₹ 6,027.12 ₹

lumens/watt . LED driver efficiency > 85 %.( fittings required LM 79 & LM-80 certificates)

(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.)

Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply

with over-voltage protection.

Above 60 to 90 watts - Cat. - III

B' class galvanised iron pipe 32 mm outside dia 45 cms long duly welded on 20 cms x 20 cms

11 x 3 mm thick M.S. base plate, erected on wall or corner for mounting luminaire with necessary NOS 2 ₹ 338.98 ₹

hardware materials duly painted. For wall mounting indoor & Outdoor Flood light Fixtures on

wall of Buiding.

SAFETY ACCESSORIES:

11.1 Supplying & erecting ABC powder type 'Ceasefire' type Fire extinguisher as per IS 13849 or 1 NOS 2 ₹ 838.98 ₹

Kg capacity with necessary clamp for erection on wall. (for 2no. LT Room Room)

Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn,

crepe bandage, gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape for

12 medicinal user, Scissors, anti-septic solution (savlon or similar) etc. (All above contents shall NOS 1 ₹ 296.61 ₹

be of standard makes)

(For Pump house / LT Room)

Providing printed instruction Chart both in English and Gujarati and duly framed with front

glasses, for treatment of person suffering from electric shock. (1no. For LT Room)

Supplying 4 mm rubber matting of following thickness as per IS:15652/IEC 61111 (for LT

Schedule B9_Jamjodhpur WSS Pumping Machinary for Fulzar Dam to Existing & Proposed WTP (Ins)

Sr No Description Unit Quantity Rate Amount

PRESSURE GAUGE:

Design, Supply, Installation, Testing, Commissioning (SITC) of Bourdon Type

Pressure Gauge, ±1% accuracy, Direct bottom 1/2" NPT (M) process connection, IP

67, Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L Bourdon Tube,

1 SS316 Movement material, Aluminium dial with black graduation on white Nos 5 ₹ 1,412.00 ₹

background, Micro Zero adjustable pointer, neoprene gasket, Blow out disc, shatter

proof glass, SS tag plate etc as per IS 3624.( Pump delivery & header).As per detail

Range : 0 - 20 kg / sq.cm. - (150 mm Dial Size)

Flow Meter (Regular Power Operated)-: (PN - 1.6)

Supply, Installation, Testing & Commissioning (SITC) of Full Bore Electromagnetic

flow meter with factory calibrated, Regular Power Operated, flanged connection,

Flow sensor, Indicator, transmitter and totaliser with all accessories viz. surge

arrestor, associated cables, cabinets, hardwares, etc complete as per following

specifications:

Flow Meter/ Sensor:

DC pulsed type, IP 68 Protection, Flanged process connection as per IS 1538 or

equivalent standard, SS304 / Metallic Alloy Flow Tube, SS316 / SS 316 L / Hastelloy

Sensor, SS316 / Hastelloy Grounding Ring / Inbuilt Grounding Electrode, Neoprene /

2 Polyurethane / Hard Rubber / Rilsan lining, SS304 / Die Cast Aluminium/ Carbon Nos 1 ₹ 1,28,921.10 ₹

steel with Anticorrosive Paint Coil Housing with Junction Box, CS flanges.

Flow Transmitter/ Converter (Remote Field Mounted):

Microprocessor based, Modular design, 2 line LCD for indication of actual flow rate,

forward, reverse, sum totaliser display, ±0.5% accuracy at 0.3 to 4 m/sec velocity,

to 20 mA with HART/Modbus output, one scalable pulse, one status output, IP

protection, Die cast aluminium / polycarbonate / SS316 with Anticorrosive Paint / PU

finish with glass window enclosure, Inbuilt EEPROM and Data Logger, 30 meters

cable length for sensor to transmitter communication etc. alongwith wall mounted/

stand mounted cabinet.

Meter Size: 250 mm (At header) - Fulzar Dam to Proposed WTP

Schedule B10_Jamjodhpur WSS Pumping Machinary for Existing Sump to Existing ESR 1, 2 & 3 (10 LL) (Mech)

Sr No Description Unit Quantity Rate Amount

Horizontal Mono Submersible Pump sets:

Supply, installation, testing & commissioning of Monoset sub. pump 3 phase 400/440 vott,

c/s. A.C. Supply & 2900 RPM , as per IS 14220 MOC : Casing: CI-FG260, Impeller : Bronze &

Shaft : SS:41 as per relevant IS.

1 M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB , Shaft: SS 410, Shaft Nos 9.00 ₹ 36,346.00 ₹

Sleeve: SS 410, Mechanical Seal (Above 30 kW), Base Frame: MS.. as per relevant IS and

Rating: Minimum 15 KW, Capacity: 1517.00 LPM, Head: 32 mtrs. (2W+ 1S) - S.M. Category -

4.6 - Existing Sump to Existing ESR 1 (10 LL), ESR 2 (10 LL) & ESR 3 (10 LL)

Lowering of openwell Horizontal Submersible pump sets/bore well pump sets in Well/Sump

with HDPE pipe/GI/MS column pipe by means of chain pulley block/fixture & jointing the cable

1.1 with fuse unit / Control panel board including fitting accessories & making it in working Nos 9.00 ₹ 943.00 ₹

condition including satisfactory testing.

Above 7.5 to 20 HP

Sluice Valve - PD Type - Short Body (PN - 1.6):

Supply, Installation, Testing & Commissioning (SITC) of ISI mark CI D/F Sluice Valve as per

IS 14846 PN 1.6 with Manually / Gear operated of following sizes with SS 304 seat rings, SS

rising spindle with all hot dipped galvanised hardwares, bolts, nuts & washers, gaskets

including all taxes, insurance, transportation, freight charges, Inspection Charges, loading

unloading, conveyence to pump house, stacking, security etc. complete as per IS and

Size: 150 mm NB Gear Operated (Delivery Side)

2.1 Size: 250 mm NB Gear Operated (Header Side) Nos 6.00 ₹ 20,098.00 ₹

Lowering, laying and jointing in position following C. I. I D/F Reflux valves, Butterfly valves,

Sluice valves and Air valves including cost of all labour, jointing material, including nut bolts

and giving satisfactory hydraulic testing, etc. complete.

Size: 150 mm NB Gear Operated (Delivery Side)

3.1 Size: 250 mm NB Gear Operated (Header Side) Nos 6.00 ₹ 946.00 ₹

Refulx Valve (PN - 1.6):

Supply at Site, Storage, Installation, Testing & Commissioning (SITC) of ISI mark CI D/F

Refulx valve as per IS 5312 (Latest Edition) of following class and diameter including all taxes,

4 insurance, transportation, frieght charges, octroi, inspection charge, loading Un-loading, Nos 9.00 ₹ 8,348.00 ₹

conveyence to departmental stores, stacking etc. complete. to be installed on Delivery Side

Pipe as per specifications.

Size: 150 mm NB (Delivery Side)

4.1 Size: 250 mm NB (Header Side) Nos 3.00 ₹ 27,830.00 ₹

Lowering, laying and jointing in position following C. I. I D/F Reflux valves, Butterfly valves,

Sluice valves and Air valves including cost of all labour, jointing material, including nut bolts

and giving satisfactory hydraulic testing, etc. complete.

Size: 150 mm NB (Delivery Side)

5.1 Size: 250 mm NB (Header Side) Nos 3.00 ₹ 946.00 ₹

Sr No Description Unit Quantity Rate Amount

EXPANSION BELLOWS (PN - 1.6):

Supply, installation, testing & commissioning (SITC) of flange ends Expansion Bellow as per

EJMA standards of overall length of minimum 300 mm, designed for 15 mm axial compression

and 5 mm axial extension with tie rods etc. of following MOC & pressure ratings.

MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS 2062 Gr. B;

Flanges: IS 2062 Gr. B (Drilling as per IS 1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS

As per detail specification.

Size: 150 mm NB- on (Delivery Side)

6.1 Size: 250 mm NB- on (Header Side for Valve + For Flow meter) Nos 6.00 ₹ 8,192.00 ₹

AIR VALVE (PN - 1.6):

Supply, Installation, Testing & Commissioning (SITC) of CI Tempor proof Flanged double

acting kinetic Air Valve with Isolation Sluice Valve as per IS 14845 PN - 1.6 & IS - 14846 PN -

1.6 respectively with SS304 float, gun metal nozzle, complete hardware's, bolts, nuts &

7 washers, gaskets etc. including all taxes, Insurance, Transportation, freight charges, Nos 3.00 ₹ 16,016.00 ₹

Inspection charges, loading, unloading, conveyance to departmental stores, stacking, security

etc. as per IS and Specification. As per detail specification.

Size: 80 mm NB - PN 1.6 (On Header line outside the Pump house) - Existing Sump to Existing

ESR 1 (10 LL), ESR 2 (10 LL) & ESR 3 (10 LL)

Lowering, laying and jointing in position following C. I. I D/F Reflux valves, Butterfly valves,

Sluice valves and Air valves including cost of all labour, jointing material, including nut bolts

8 and giving satisfactory hydraulic testing, etc. complete. Nos 3.00 ₹ 411.00 ₹

Size: 80 mm NB - PN 1.6 (On Header line outside the Pump house) - Existing Sump to Existing

ESR 1 (10 LL), ESR 2 (10 LL) & ESR 3 (10 LL)

Supply, Installation, Testing & Commissioning (SITC) of MS fabricated specials with both side

flanges like Blind flange, Elbow, Eccentric / Cocentric tapers, bends, Y Joints, Flanges,

ductfoot bend, Puddle pipe, Bell mouth, Tee joint, Reducers, Nut - Bolt, Gaskets Etc. of

required size & in required quantities as per relevant IS for suction, delivery & header line.

Manufacture, Supply & Delivery of Electric Resistance Welded (Up to 400mm)/Submerged Arc

Welded(Above 400mm) M.S.Pipe having beveled ends plate or coil conforming to IS-3589-

2001 or its latest revision/ ammendment for following thickness outside diameter at GWSSB

store or site anywhere in Gujarat State including all taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading, unloading conveyance to Departmental stores,

stacking etc. all complete. (Rate for MS Pipe based on the ex. works price of HR Coil as

Rs.58500 per MT - withouth GST (Above 3.15 mm to 10 mm) & Rs. 59000.00 per MT without

mm) as onJan-23.( WPI Index of H. R Coil of Dec-22 is 144)

Delivery Side: 150 mm dia. (4.5 mm thickness)

10.1 Header Side: 250 mm dia. (5.0 mm thickness) Rmt 200.00 ₹ 2,336.00 ₹

Sr No Description Unit Quantity Rate Amount

Lowering, laying, Jointing & welding in position to correct line & level M.S. Pipe with outer

gunniting & inside lining/Epoxy painting on pedestal or chairs upon prepared formation or

11 prepared bedding in trenches the rates include conveyance from store to site of work loading, Rmt 200.00 ₹ 251.00 ₹

unloading, joint plastering, hydrotesting etc.complete.

Header Side: 250 mm dia. (5.0 mm thickness)

11.1 Delivery Side: 150 mm dia. (4.5 mm thickness) Rmt 200.00 ₹ 180.00 ₹

Providing & laying reinforced cement concrete in Thrust Block / Pipe / Valves Supports etc.

with tar steel black trap kapchi as coarse aggregate for raft, grillage footing inclusive providing

binding necessary size TMT steel bar with centering form work, consolidating as per directive

in 1:2:4 ratio.

12 For SITC Civil SOR 2022-23 Part-1 C1(RCC), Item No. 3 (2) Page No.43 Rs. 4906.00 Cum Cu. Mtr. 8.00 ₹ 8,566.30 ₹

with form work by adding Tar steel bar 50 Kg./ cum (Civil SOR 2022-23 Part-1 C1(RCC) Item.

No. 3 (2) Pg. No. 43 Rs. 4906.00 Cu. M. with Foam work by adding Tar Steel, bara 50 Kg. CuM

@ Civil SOR 2022-23 Pg. 45 Item. No. 9.2 comes to 50 Kg. X Rs. 73.208 = Rs. 3660.4 +

4906.00 = Rs. 8566.4 per CuM) for duty point.

Schedule B11_Jamjodhpur WSS Pumping Machinary for Existing Sump to Existing ESR 1, 2 & 3 (10 LL) (Ele)

Sr No Description Unit Quantity Rate Amount

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA. at 415 V, having normal current rating up to

1 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply Nos 1.00 ₹ 27,476.69 ₹

50 c/s. with all internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing.

400 AMP cat-III

11kV Ring Main Unit (RMU)

Supply, installation, testing & commissioning Indoor type 11 KV, 630 Amps. 21 kA

for 3 second SF6 type extensible and motorized 5 way smart Ring Main Unit (RMU)

complete with (2 VCB + 3 LBS) with FRTU and FPI as per IS

11 kV Two Pole Structure Assembly:

SITC of 11 kV double pole 9 meter high structure made of 6" X 3" 'I" section girder,

4" X 2" channels, clamps, nuts, bolts, stay wires including earthing system with

following accessories duly connected with ACSR conductors as per approved

drawing & in compliance with requirement of IEC.

(a) 11 kV, 200 A drop out fuses with Synthetic Resin Bonded Paper (SRBP) tubes:

Set (01 piece per phase).

(b) 11 kV, 400 A G.O.D. switch complete with earth switch, insulators, operating

handle with galvanised pipe, square bar: 1 Set.

(c) 11 kV lightning arrestor with clamps: 3 Nos.

(d) 11 kV Disc Insulators (70KN): 3 Nos.

(e) 11 kV Pin Insulators (5KN): 3 Nos.

(f) 20 mm dia. GI Stay Sets Complete: 2 Set.

11 kV Double Pole Structure Assembly

Sr No Description Unit Quantity Rate Amount

SITC of outdoor type, three phase, oil immersed, distribution transformer of required

KVA & voltage ratio, copper double wound, vector group - Dyn11, HV delta

connected & LV star connected with neutral brought out connected to provide

separate earthing terminals, bushing / cable box on HV side and cable box on LV

side suitable for cables or bus duct as per requirement with standard fittings,

conforming to IS: 1180 (Part-1) / 2014 with its latest amendment including first fill of

transformer oil & following accessories.

(a) Oil conservator with filling holes with cap and prismatic oil level gauge.

(b) Silica Gel dehydrating breather charged with silica gel

(c) Oil drain cum sampling valve with plug

(d) Oil filter valve

(e) Lifting Eyes / Hooks / Lugs

(f) Two earthing terminal

(g) Diagram and rating plate

(h) Air release plug

(i) Explosion vent with diaphragm

(j) Thermometer pocket

(k) Four bi-directional plain roller with base channel with hauling holes

(l) Fixed / Separate type radiator banks

(m) Off circuit externally operated tapping switch (For rating < 1000 kVA)

(n) 100 mm stem type oil temperature indicator (For rating < 500 kVA)

(o) Bucholtz relay with shut off valve (For rating ≥ 500 KVA)

(p) 150 mm dial type oil temperature indicator with Alarm / Trip contact (For rating ≥

(q) 150 mm dial type winding temperature indicator with Alarm / Tip contact (For

rating ≥ 1000 kVA)

(r) Marshalling box (For rating ≥ 500 kVA)

(s) 150 mm dia. magnetic type oil gauge (For rating ≥ 1600 kVA)

Casting of transformer plinth / foundation including oil soak pit (where required) in

situ reinforced cement concrete in M 20 using granite, quartzite trap metal of size

mm to 20 mm for RCC work including providing of 53 grade cement & Fe 415 grade

TMT bars, scaffolding, centering, form work, curing etc. complete.

RCC plinth / foundation for transformer of capacity ≤ 315 KVA. - Plinth Dimension -

LOW VOLTAGE (LT) PANEL BOARD (PMCC):

5 SITC of PMCC Panel (50kA) complete in all respects as per Specification / IS and ₹ -

Providing Common Panel including following as minimum: For ESR - 1 &

Sr No Description Unit Quantity Rate Amount

LV POWER CONTROL CENTER (PCC): Supply, installation, testing and

commissioning LV Distribution Board (LVDB) totally enclosed, dust & vermin proof,

indoor type, fabricated from CRCA sheet steel with minimum thickness of 3 mm for

base frame/ channel/ gland plates, 2.0 mm for load bearing members/ doors &

mm for internal partitions, minimum degree of protection - IP 52 as per IS:

suitable for operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded,

with instrumentation compartments accomodating meters, aux / protective relays,

LED type indicating lamps & control MCBs as per IS: 13947, current & voltage

transformers as per IS: 2705, air insulated electrolitic grade Aluminum/ Copper

busbar for three phase & neutral system, GI earth bus for entire length, power/

control wiring using 1100V grade, FRLS insulated copper conductor wires

5.1 conforming to IS: 694 & 8130, equipment fittings, horizontally running busbar Set 1.00 ₹ 43,183.00 ₹

compartment height of minimum 300 mm, incoming & ougoing cable connections for

1100V grade, Aluminium/ Copper conductor XLPE/ PVC insulated & PVC sheathed

armoured cable. LVDB shall have required incomming of following type & ratings.

Above 80 A, upto & including 250 A, 3 & 4 Pole, Air Break Fixed MCCB conforms to

IS / IEC 60947-2 with trip free mechanism, current limiting type with Microprocessor

release (O / C, S / C & E / F) with adjustable settings & having minimum 2NO+2NC

potential free auxiliary contacts with all necessary Electro-Mechanical protections &

interlocks etc. MCCB module, when used as

Incommer shall have following technical features:

4 Pole, MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of

Icu), Microprocessor release

Control Panel Board with Star Delta Starter:

Star Delta starter suitable for local & remote pump control application consisting of

MPCB, overload relay and contactors as per Type II coordination including digital

voltmeter, analogue ammeter with selector switch, run hour meter, required

protective relays & control accessories

S. D. from 16 to 20 HP

LT Power Capacitor:

Supply, installation, testing & commissioning heavy duty APP type capacitor unit,

vacuum impregnated with non-PCB / non toxic oil, internally delta connected with

built in internal fuses complete with discharge resistances & terminal cover, rated for

440 V AC, 3 Phase, 50 Hz as per IS: 13585 Part-1.

APP type Capacitor - 5 kVAR for each

LOW VOLTAGE (LT) PANEL BOARD (PMCC):

6 SITC of PMCC Panel (50kA) complete in all respects as per Specification / IS and ₹ -

Providing Common Panel including following as minimum: For ESR -

Sr No Description Unit Quantity Rate Amount

LV POWER CONTROL CENTER (PCC): Supply, installation, testing and

commissioning LV Distribution Board (LVDB) totally enclosed, dust & vermin proof,

indoor type, fabricated from CRCA sheet steel with minimum thickness of 3 mm for

base frame/ channel/ gland plates, 2.0 mm for load bearing members/ doors &

mm for internal partitions, minimum degree of protection - IP 52 as per IS:

suitable for operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded,

with instrumentation compartments accomodating meters, aux / protective relays,

LED type indicating lamps & control MCBs as per IS: 13947, current & voltage

transformers as per IS: 2705, air insulated electrolitic grade Aluminum/ Copper

busbar for three phase & neutral system, GI earth bus for entire length, power/

control wiring using 1100V grade, FRLS insulated copper conductor wires

6.1 conforming to IS: 694 & 8130, equipment fittings, horizontally running busbar Set 1.00 ₹ 43,183.00 ₹

compartment height of minimum 300 mm, incoming & ougoing cable connections for

1100V grade, Aluminium/ Copper conductor XLPE/ PVC insulated & PVC sheathed

armoured cable. LVDB shall have required incomming of following type & ratings.

Above 80 A, upto & including 250 A, 3 & 4 Pole, Air Break Fixed MCCB conforms to

IS / IEC 60947-2 with trip free mechanism, current limiting type with Microprocessor

release (O / C, S / C & E / F) with adjustable settings & having minimum 2NO+2NC

potential free auxiliary contacts with all necessary Electro-Mechanical protections &

interlocks etc. MCCB module, when used as

Incommer shall have following technical features:

4 Pole, MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of

Icu), Microprocessor release

Control Panel Board with Star Delta Starter:

Star Delta starter suitable for local & remote pump control application consisting of

MPCB, overload relay and contactors as per Type II coordination including digital

voltmeter, analogue ammeter with selector switch, run hour meter, required

protective relays & control accessories

S. D. from 16 to 20 HP

LT Power Capacitor:

Supply, installation, testing & commissioning heavy duty APP type capacitor unit,

vacuum impregnated with non-PCB / non toxic oil, internally delta connected with

built in internal fuses complete with discharge resistances & terminal cover, rated for

440 V AC, 3 Phase, 50 Hz as per IS: 13585 Part-1.

APP type Capacitor - 5 kVAR for each

Sr No Description Unit Quantity Rate Amount

Lighting Distribution Board (LDB) as under:

Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

7 MCBs.(The DBs should be used of same company of MCB to be used) suitable for NOS 2.00 ₹ 5,086.44 ₹

Three phase incoming and single phase horizontal type outgoing Per phase isolation

type (PPI) single door 4 way Prewired Lighting Distribution Board Suitable to house :

Incoming: 25A FP, ELMCB (30mA), Cat-III

Outgoing: 20A SP MCB (4 nos.), 16A SP MCB (4 nos.)

MEDIUM VOLTAGE CABLES

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded

Aluminium conductor, galvanised steel flat strip / round wire armoured, extruded

PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary

8 clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road MTR 150.00 ₹ 622.00 ₹

crossing or floor as per site requirement) conforming to IS:7098 (Part-1) &

IEC:60502 (Part-1) of following sizes:

3.5 c X 185 Sq.mm AL XLPE Armoured (For Two Pole Structure to RMU to

Transformer to MCCB Box to MCCB Panel)

3.5 c X 35 Sq.mm AL XLPE Armoured (For Incomer to MCCB to LVPCC to Control

8.2 3 Core x 6 Sqmm CU XLPE Armoured cable (For 15 KW) Three Motors MTR 200.00 ₹ 153.00 ₹

8.3 3 Core x 6 Sqmm CU XLPE Armoured cable (For 15 KW) Three Motors MTR 200.00 ₹ 153.00 ₹

8.4 3 Core x 6 Sqmm CU XLPE Armoured cable (For 15 KW) Three Motors MTR 200.00 ₹ 153.00 ₹

8.5 4 C x 4 Sq.mm CU XLPE Armoured (For LDB, Instruments and Other.) MTR 200.00 ₹ 141.00 ₹

Sr No Description Unit Quantity Rate Amount

CABLE END TERMINATION AND CONNECTION :

Providing & fitting heavy duty brass cable glands (nickel-plated) with washers &

rubber ring conforming to IS, suitable for 3, 3½ & 4 core cables of following type &

Double Compression Brass Cable Glands

3.5 c X 185 Sq.mm AL XLPE Armoured (For Two Pole Structure to RMU to

Transformer to MCCB Box to MCCB Panel)

3.5 c X 35 Sq.mm AL XLPE Armoured (For Incomer to MCCB to LVPCC to Control

9.2 3 Core x 6 Sqmm CU XLPE Armoured cable (For 15 KW) Three Motors Nos 6.00 ₹ 107.00 ₹

9.3 3 Core x 6 Sqmm CU XLPE Armoured cable (For 15 KW) Three Motors Nos 6.00 ₹ 107.00 ₹

9.4 3 Core x 6 Sqmm CU XLPE Armoured cable (For 15 KW) Three Motors Nos 6.00 ₹ 107.00 ₹

9.5 4 C x 4 Sq.mm CU XLPE Armoured (For LDB, Instruments and Other.) Nos 8.00 ₹ 107.00 ₹

Providing & fitting crimping type Cable Terminals (Lugs) conforming to IS of following

types and sizes

Aluminium Reducer Terminals (in Sq.mm.)

3.5 c X 185 Sq.mm AL XLPE Armoured (For Two Pole Structure to RMU to

Transformer to MCCB Box to MCCB Panel)

3.5 c X 35 Sq.mm AL XLPE Armoured (For Incomer to MCCB to LVPCC to Control

10.2 3 Core x 6 Sqmm CU XLPE Armoured cable (For 15 KW) Three Motors Nos 18.00 ₹ 8.00 ₹

10.3 3 Core x 6 Sqmm CU XLPE Armoured cable (For 15 KW) Three Motors Nos 18.00 ₹ 8.00 ₹

10.4 3 Core x 6 Sqmm CU XLPE Armoured cable (For 15 KW) Three Motors Nos 18.00 ₹ 8.00 ₹

Sr No Description Unit Quantity Rate Amount

10.5 4 C x 4 Sq.mm CU XLPE Armoured (For LDB, Instruments and Other.) Nos 32.00 ₹ 8.00 ₹

Maintenance free Chemical Earthing

Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover. (A)(approved make OEM has to

submit test certificate including value of earth resistance of installation duly stamped

11 and signed by agency and officer Incharge has to ensure the value of earthing Nos 4.00 ₹ 4,544.92 ₹

resistane mentioned in test Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to retain moisture for long

time Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg. (for LT panel and Pump)

INTERNAL WIRING:-

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed in

12 /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated MTR 40.00 ₹ 76.27 ₹

stranded wire of green colour for earth continuity of following size

with medium class Rigid PVC pipe and accessories

Main wiring with 3 wire 1.5 Sq.mm

Supply,Installation,Testing and Commissioning of Main wiring with 3 wire 2.5 sq.

mm as per tender specification / IS

Sr No Description Unit Quantity Rate Amount

INTERNAL POINT WIRING:-

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete. cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of accessories.

For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu.

With medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete. Cat. - III

Point wiring for Individual Plug with earthwire of 1.5 sq.mm (Green) both are of ISI

marked 1.1kV grade FRLS PVC insulated multistrand copper wires, in following type

of to be erected concealed in/ on surface of wall/ ceiling complete with Modular type

12.4 switch & 5 pin Plug erected on PVC/ Metallic box covered with appropriate front NOS 4.00 ₹ 661.86 ₹

plate modules erected on/ in wall/ ceiling as per pipe erected with following type of

accessories.For 16A Plug with 2-2.5 sq.mm Cu. Wire with medium class Rigid PVC

pipe and accessories.Cat. - III

Sr No Description Unit Quantity Rate Amount

LED LIGHT FIXTURES:

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of

thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated

and high U.V. & corrosion resistance with diffuser with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

Luminaire efficacy> 85 lumens/watt ,LED efficiency-110 lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux make LED used

for luminaire. ( fitting required LM-79 & LM-80 Certificates)

Tube Light with integral/ nonintegral driver

22-24 Watts, Surge - 2KV,IP-20, 4 feet, Cat-III

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark

with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on

existing hook or clamp with earthing. [Make shall be approved by Engineer in

EXTERNAL LIGHTING:

Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings required LM 79 & LM-80 certificates) (NOTE:

Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.)

Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection.

Above 60 to 90 watts - Cat. - III

B' class galvanised iron pipe 32 mm outside dia 45 cms long duly welded on 20 cms

14.1 x 20 cms x 3 mm thick M.S. base plate, erected on wall or corner for mounting NOS 4.00 ₹ 338.98 ₹

luminaire with necessary hardware materials duly painted. For wall mounting indoor

& Outdoor Flood light Fixtures on wall of Buiding.

Sr No Description Unit Quantity Rate Amount

SAFETY ACCESSORIES:

Supplying & erecting ABC powder type 'Ceasefire' type Fire extinguisher as per IS

13849 or 1 Kg capacity with necessary clamp for erection on wall. (for 2no. LT Room

Supplying stand first AID box with antiseptic cream, medicine for use on wounds due

burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-aid)

15.1 adhesive tape for medicinal user, Scissors, anti-septic solution (savlon or similar) NOS 2.00 ₹ 296.61 ₹

etc. (All above contents shall be of standard makes)

(For Pump house / LT Room)

Providing printed instruction Chart both in English and Gujarati and duly framed with

15.2 front glasses, for treatment of person suffering from electric shock. (1no. For LT NOS 2.00 ₹ 127.12 ₹

Supplying 4 mm rubber matting of following thickness as per IS:15652/IEC

Schedule B13_Jamjodhpur WSS Pumping Machinary for Existing Sump to Existing ESR 1, 2 & 3 (10 LL) (Ins)

Sr No Description Unit Quantity Rate Amount

PRESSURE GAUGE:

Design, Supply, Installation, Testing, Commissioning (SITC) of Bourdon Type

Pressure Gauge, ±1% accuracy, Direct bottom 1/2" NPT (M) process

connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel,

SS316 L Bourdon Tube, SS316 Movement material, Aluminium dial with black

graduation on white background, Micro Zero adjustable pointer, neoprene

gasket, Blow out disc, shatter proof glass, SS tag plate etc as per IS 3624.(

Pump delivery & header).As per detail specification.

Range : 0 - 10 kg / sq.cm. - (150 mm Dial Size) - Existing Sump to Existing

ESR 1 (10 LL), ESR 2 (10 LL) & ESR 3 (10 LL)

Flow Meter (Regular Power Operated)-: (PN - 1.0)

Supply, Installation, Testing & Commissioning (SITC) of Full Bore

Electromagnetic flow meter with factory calibrated, Regular Power Operated,

flanged connection, Flow sensor, Indicator, transmitter and totaliser with all

accessories viz. surge arrestor, associated cables, cabinets, hardwares, etc

complete as per following specifications:

Flow Meter/ Sensor:

DC pulsed type, IP 68 Protection, Flanged process connection as per IS

or equivalent standard, SS304 / Metallic Alloy Flow Tube, SS316 / SS 316 L /

Hastelloy Sensor, SS316 / Hastelloy Grounding Ring / Inbuilt Grounding

Electrode, Neoprene / Polyurethane / Hard Rubber / Rilsan lining, SS304 / Die

2 Cast Aluminium/ Carbon steel with Anticorrosive Paint Coil Housing with Nos 3.00 ₹ 1,17,201.00 ₹

Junction Box, CS flanges.

Flow Transmitter/ Converter (Remote Field Mounted):

Microprocessor based, Modular design, 2 line LCD for indication of actual flow

rate, forward, reverse, sum totaliser display, ±0.5% accuracy at 0.3 to 4 m/sec

velocity, 4 to 20 mA with HART/Modbus output, one scalable pulse, one status

output, IP 67 protection, Die cast aluminium / polycarbonate / SS316 with

Anticorrosive Paint / PU finish with glass window enclosure, Inbuilt EEPROM

and Data Logger, 30 meters cable length for sensor to transmitter

communication etc. alongwith wall mounted/ stand mounted cabinet.

Meter Size: 250 mm (At header) - Existing Sump to Existing ESR 1 (10 LL),

ESR 2 (10 LL) & ESR 3 (10 LL)

Schedule C1_O & M for 5 years

For All Components Amount in Rs

S No. Components Quantity Unit For WTP (B)

Other than WTP (A) (A + B)