Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 LAccepted-AOC | L1 | Accepted-AOC AGREEMENT EXECUTED BY THE CONTRACTOR | |
| 2 | L2₹1.6 L+₹233.83 (0.15%)Rejected-AOC | L2 | Rejected-AOC HIGHER RATE , HENCE REJECTED |
| Sl No | Description | Qty | Unit | SHAMSUDHEEN C L1 | Siyas K L2 |
|---|---|---|---|---|---|
| 1.00KITCHEN SHED RENOVATION | |||||
| 1.00 | 15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet | 44.37 | sqm | 144.73 ₹6,421.67 Lowest | 150 ₹6,655.5 |
| 1.00 | 15.17.2:Dismantling steel work in single sections including dismembering and stacking within 50 metes lead in:Channels, angles, tees and flats | 354.96 | kg | 2.01 ₹713.47 Lowest | 2.01 ₹713.47 Lowest |
| 1.00 | 50.6.7.1:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc. | 2.14 | cum | 6,920.07 ₹14,781.27 Lowest | 6,920.07 ₹14,781.27 Lowest |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 185.7 | kg | 196 ₹36,397.2 Lowest | 196 ₹36,397.2 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 165.07 | kg | 158.75 ₹26,204.86 Lowest | 158.75 ₹26,204.86 Lowest |
| 1.01 | OD322108/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with
zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,
complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required. | 66.96 | sqm | 529.37 ₹35,446.62 Lowest | 529.37 ₹35,446.62 Lowest |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 9.3 | metre | 479.56 ₹4,459.91 Lowest | 479.56 ₹4,459.91 Lowest |
| 1.01 | OD322760/2025-2026:Providing and fixing 150 mm semi circular PVC 4kgf/cm2 rain water gutter pipe with iron
brackets with 25x5 mm size flat, screws and washers etc., including making necessary
connections with rain water pipes etc. complete. | 18.6 | metre | 350.7 ₹6,523.02 Lowest | 350.7 ₹6,523.02 Lowest |
| 1.01 | 10.6.2:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover | 2.7 | sqm | 3,052.72 ₹8,242.34 Lowest | 3,052.72 ₹8,242.34 Lowest |
Tender Value
₹1.7 L
EMD Value
₹4,235
Closing Date
16 Oct 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GREESHMA G R
Office of the Assistant Engineer LID EW SECTION KARULAI GP
ANNUAL PLAN 2025 26 KARULAI GP WARD 1 KITCHEN RENOVATION OF PULLI GUP SCHOOL KARULAI GP PRO NO 127 2025 26
2025_LSGD_806860_11
02/2026/AE/LID EW/KLI
Open Tender
Civil Works - Buildings
Item Rate
KARULAI GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹4,235
Yes
20 Nov 2025
8 Oct 2025
18 Oct 2025
8 Oct 2025
16 Oct 2025
8 Oct 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1344365.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .