Upgradation of PWD Main road to Solda Bhatoli PCM road (Kotla Solda Siyuhni road) km. 0/0 to 8/620 under PMGSY -II (Batch-I 2019-20) Package No. HP-04-309 in Tehsil Jawali District Kangra (HP)

Amount

Excavation in hilly area in all heights and depths and in all kind of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/ wedging out of rock ( where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the required line, grades cutting and trimming of side slopes , camber, super elevation and level shown as per the drawing and as directed by the Engineer-in- Charge at site according to the as per M.O.R.D. technical specification section 300 and 1600 and sorting out surplus materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus material to the approved dumping sites through all modes of transporation including head load or animals transport or by mechanical means along with its levelling fine dressing and carriage of machineries, materials, tools equipments and safety measures and incidential necessary to complete the work by mechanical means and / or labour if required. 482.63 cubic metre quantity from stones/useful materials to be recovered from the contractor at the rate 300/- (Rupees three hundred) per cubic metre in the bill on pro-rata basis as per actual quantity executed. Any loss to public property during the course of execution shall be the absolutely responsibility of the contractor which shall have to be compensated by him in all cases including carriage of materials within all leads and lifts. The rate is including octroi, royality, malkana toll tax or others taxes imposed by the Government excluding GST.

Loosening of the ground upto a level of 300mm (three hundred milimetres) below the sub grade level, watered, graded and compacted in layers to meet requirement of tables 300.1 and 300.2 for sub grade construction as per technical specification clause 303 and as per directions and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, or other taxes imposed by the Government excluding GST .

Construction of sub grade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leads transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000m (One thousand metre) as per MORD technical specification clause 407,as per the direction and the entire satisfaction of Engineer-in-Charge Including carriage of material within all leads and lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST .

Earth work in excavation in foundations for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera and all type of classification of soil comprising of ordinary / mixed soil, ordinary rock, hard rock chiseling /wedging out rocks ( Where blasting is prohibited) as per drawings and as per M.O.R.D. technical specification section 300 and 1600 and as per direction of the Engineer- In – Charge including setting out shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material including shoring and strutting and pumping and bailing out water (surface and sub soil water ) upto any depth any quantam of water including cleaning of slush which may arrise out during dewatering as per direction of Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental . The rate is including octroi, royality, malkana, toll tax, or other taxes imposed by the Government excluding GST.

Back filling with granular material obtained from approved quarry/ road side cutting behind abutments, wing wall return walls, and retaining walls/ Breast walls complete as per drawing and MORD technical specifications clause 1203 and 1604 and as per directions and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, or other taxes imposed by the Government excluding GST .

Construction of 175mm (one hundred seventy five milimetres) consolidated thickness Granular sub base by providing well graded material spreading in uniform layers with Tractor mount grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with three wheel 80-100 (Eighty/Hundred) KN static roller to achieve the desired density complete as per MORD technical specifications clause 401 for grading-I Material as per entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana and Toll tax, or other taxes imposed by the Government excluding GST.

Providing and laying spreading and compacting by mechanical means stone aggregate/ specified size to water bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 (Eighty/Hundred) K.N. static Road roller in stages to proper grade and camber applying and brooming with application of stone screening type-B of size 11.2mm (eleven point two milimetres) nominal size), at the rate of 0.20 cum ( zero point two zero cubic metres) per ten square metres and binding material at the rate of 0.06 cubic metre per ten square metre to fill up the intersitices of course aggregate, watering and compacting to the required density grading –II 63mm to 45mm ( Sixty three millimetres to forty five millimetres) size 75mm (Seventy Five millimetres) compacted thickness as per M.O.R.D. technical specifications clause 405 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidential . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Providing and laying spreading and compacting stone aggregate/ specified size to water bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 (Eighty/Hundred) K.N. static Road roller in stages to proper grade and camber applying and brooming with application of stone screening type-B of size 11.2mm (eleven point two milimetres) nominal size) at the rate of 0.18 cum ( zero point one eight cubic metres) per ten square metres, to fill up the intersitices of course aggregate, watering and compacting to the required density grading –III 53mm to 22.4mm (Fifty three milimetres to twenty two point four milimetres) size 75mm (Seventy Five millimetres) compacted thickness as per M.O.R.D. technical specifications clause 405 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidential . The rate is including octroi, royality, Malkana, toll tax, s or other taxes imposed by the Government excluding GST .

Providing and applying primer coat with BITUMEN emulsion (SS-1) with Nano Techonolgy on the prepared surface of granular base including cleaning of road surface with Hydraulic brooms and spraying primer @ 0.85 Kg. (Zero point eight five kilogram) per square metre using one part of bitumen emulsion SS-I and two part of water mixed with Nano Tera prime emulsion 1% (One percent) of weight of emulsion by mechanical means as per M.O.R.D. technical specifications clause 502 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads' lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST .

Providing and applying tack coat with bitumen emulsion (RS-I) with Nano Techonolgy using emulsion distributor at the rate of 0.25 kgs. (Zero decimal two five kilogram) per square metre one part of bitumen emulsion RS-I and two part of water mixed with 1.4% (one decimal four percent) nano tack emulsion of weight of emulsion on the prepared granular surfaces treated with primer and cleaned with hydraulic broom as per MORD technical specification clause-503, including hauling of material in all leads lifts as per the entire satisfaction and direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, malkana toll tax and other taxes imposed by the Government excluding GST .

Providing and applying tack coat with bitumen emulsion (RS-I) with Nano techonolgy Nano tack using emulsion distributor at the rate of 0.25 kgs. (Zero decimal two five kilogram) per square metre one part of bitumen emulsion RS-I and two part of water mixed with 1.4% (one decimal four percent) nano tack emulsion weight of emulsion on the prepared bituminous surfaces cleaned with Hydraulic broom as per MORD technical specification clause 503, including hauling of material in all leads lifts as per the entire satisfaction and direction of Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, royality, malkana toll tax and other taxes imposed by the Government excluding GST .

Providing and laying 50mm (fifty milimetres) thick bituminous macadam with Nano Techonolgy with hot mix plant using crushed aggregate of grading as per table 500.4 premixed with bituminous binder, transported to work site upto any lead laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per MORD technical specification clause 504 Nano nanotechnology at the rate of 0.1% (zero decimal one percent) of weight of bitumen binder VG-10 including hauling of material in all leads lifts as per the entire satisfaction and direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, malkana toll tax and other taxes imposed by the Government excluding GST.

Providing and laying 30mm (Thirty five milimetres) compacted thickness bituminous concrete with minimum 100-120 TPH (one hundred to one hundred twenty) tonne per hour hot mix batch/ drum type plant with electronic control Grading-II using crushed aggregate 13.2mm (thirteen point two milimetres) nominal size of specified grading premixed with bitumen binder 5.5% (five point five percent of mix and filler using VG-10 with Nano Technology at the rate of 0.1% (zero decimal one percent) of weight of bitumen binder of mix weight transported to site, laid with censor paver finisher hydraulic with censor control to the required grade, level and alignment over a previously prepared surface and rolling complete with smooth wheeled roller 8-10 (eight to ten) tonne capacity for initial break down rolling and vibratory roller 8-10(eight to ten) tonne capacity or pneumatic tyre roller of 12-15 (twelve – fifteen tonne) with tyre pressure of atleast 0.56MP’ (zero point five six) for intermediate rolling and finish rolling with 6-8 (six to eight) tonne smooth wheeled tandom roller to achieve the desire compaction as per MORTH technical specifications clause 507 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate also includes octroi, royality, malkana toll tax, or other taxes imposed by the Government excluding GST.

Scarifying the existing bituminous road surface to a depth of 150 mm (one hundred fifty milimetres) and disposal of scarified material upto any lead and lifts as per MORD Technical Specification Clause 301.4, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excuding GST.

Construction of un-reinforced, dowel jointed at expansion and construction joints only plain cement concrete pavement M-30 (M-thirty) (Grade) as per design over a prepared sub base with 43 grade (forty three) cement or any other equivalent as per clause 1501 conforming to IS:383 maximum size of coarse aggregate not exceeding 25mm, (Twenty five millimetres) mixed in a concrete mixer of not less than 0.2cum (Zero point two cubic metres) capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick (One hundred twenty five micron )polythene film wedges, steel plates including levelling the form work as per drawing, spreading the concrete with shovel, rakes, compacted using needle, screed and plate vibrator and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars of appropriate dia near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slab for fourteen days using curing compound (where specified) and water finishing to lines and grade as per drawing and MORD technical specifications clause 1501, and curing complete, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Providing and laying of cold applied plastic paint 2.5 mm (two point five milimetres) thick including reflectorising glass beads @ 250 gms (two hundred fifty grams) per sqm area, thickness of 2.5 mm (two point five milimetres) is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes, as per MORTH Technical specification clause 803, the direction and the entire satisfaction of Engineer-in-Charge Including carriage of material within all leads and lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Providing and laying of interlocking concrete block pavements having thickness 80mm (Eighty milimetres) as per drawing and technical specifications section 1500, including carriage of materials within all leads, lifts and other incidental charges.The rate also includes octroi, royality, malkana toll tax and other taxes imposed by the Government excluding GST.

Providing and laying concrete for plain concrete in open foundation complete nominal mix 1:4:8 (one cement : four sand : eight graded stone aggregate 40mm (forty milimetres) in Retaining walls and Breast walls as per drawing and technical specifications section 800,900 and 1200, as per the direction and the entire satisfaction of Engineer-in-Charge Including carriage of material within all leads and lifts and other incidental . The rate is including of octroi, royality, Malkana, GST or other taxes imposed by the Government excluding GST.

Providing and laying 100mm ( One Hundred millimetre) dia ISI marked PVC pipe weep holes in brick masonry/ stone masonry, plain/reinforced concrete abutment, wing wall, return wall and retaining/breast walls extending through the full width of the structures with slope of 1(V): 20(H) one vertical : twenty horizental towards draining face complete as per drawing and M.O.R.D. technical specifications section 700 and 1200 and as per direction and entire satisfaction of Engineer – in- Charge, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Providing and laying mechanically mixed and vibrated concrete for plain concrete in open foundation for all type of structure complete of plain cement concrete nominal mix 1:3:6 ( One cement : three sand : six graded crushed stone aggregate 20mm ( Twenty millimetre) nominal size on ground or under water including curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arise at the time of laying concrete complete for all heights/ depths including the cost of form work as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 as per the direction of Engineer-in-Charge Including carriage of material within all leads and lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Providing and laying mechanically mixed and vibrated plain cement concrete M-15 (M-Fifteen) with minimum cement contents not less than 275 kg (Two hundred seventy five kilogram) per cubic metre on ground or under water including pumping or bailing out water/ dewatering surface and sub soil water and removal of the slush which may arise at the time of laying concrete for all heights/ depths and any quantum of water for sub structure and the like etcetera in toe walls and parapets etcetera as per drawings and M.O.R.D. technical specifications section 800, 900 and 1200 including the cost of form work curing complete, including carriage of materials within all leads, lifts and other incidental or as per the entire specification and directions of Engineer-in-Charge . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST .

Providing and laying rubble stone flooring in cement mortar 1:3 (one cement : three sand) laid over cement concrete bedding inclusive of the cost complete, as per drawing and MORD techanical specification section 1300 as per the direction of Engineer-in-Charge Including carriage of material within all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Providing and laying concrete cradle bedding with M-15 (M-fifteen) Grade Cement Concrete as per section/ clause 800, 900 and 1101 Type A (Concrete Cradle) Bedding, as per the direction of Engineer-in-Charge Including carriage of material within all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Fillling in foundation trenches as per drawing and as per MORD technical specification Clause 305.3.9 Earth filling , as per the direction of Engineer-in-Charge Including carriage of material within all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government excluding GST.

Providing and laying ( to level or slope) 900 mm dia (nine hundred millimetre ) diametre reinforced cement concrete heavy duty non pressure pipes IS Class NP-3 for culverts on first class bedding or granular material in single row including fixing collar with cement mortar 1 : 2 ( One cement : two sand) but excluding the cost of excavation, protection works, back filling, concrete and masonry work in head walls and parapets as per drawing and M.O.R.D. technical specifications clause 1101 and as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidential . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST .

Providing and laying of boulder apron laid in wire crates with 4mm (four milimetres) dia G.I. wire conforiming to IS:280 and IS:4826 in 100mmx100mm (One hundred milimetres into one hundred milimetres) mesh (woven diagonally) including 10 percent (ten percent) extra for laps and joints laid with stone boulders weighing not less than 40kg (Forty kilogram) each as per drawing and MORD technical specifications clause 1301, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST .

Supplying fitting and placing HYSD bars reinforcement (Fe-415) in sub structure complete as per drawing and as per MORD technical specification section 1000 and 1200 including cutting, bending binding and placing in position complete in all respect including cost of binding wire up to any heights/ depths including carriage of materials with in all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Supplying fitting and placing HYSD bars reinforcement in super structure complete as per drawing and as per MORD technical specification section 1000 and 1400 including cutting, bending binding and placing in position complete in all respect including cost of binding wire up to any heights/ depths including carriage of materials with in all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Providing and laying mechanically mixed and vibrated/ plain cement concrete in sub structure using grade M-20 (M-twenty) designed mix with minimum cement contents not less than of 330kg (three hundred thirty kilogram) per cubic metre with 20mm (Twenty milimetres) nominal size graded crushed stone aggregate as per drawing and as per M.O.R.D. technical specifications section 800, 900 and 1200 including the cost of form work in Bed Block and dirt walls but excluding the cost of reinforcement for reinforced concrete work as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidential . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Providing and laying mechanically mixed and vibrated/ plain cement concrete in open foundation using grade M-20 (M-twenty) designed mix with minimum cement contents not less than of 330kg (three hundred thirty kilogram) per cubic metre with 20mm (Twenty milimetres) nominal size graded crushed stone aggregate as per drawing and as per M.O.R.D. technical specifications for roads section 800, 900 and 1200including the cost of form work in abutment but excluding the cost of reinforcement for reinforced concrete work as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidential . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure as per drawing and M.O.R.D. technical specification section 800, 900 and 1400 R.C.C. Grade M-25 (M-twenty five) designed mix with minimum cement contents not less than of 400 kg. (four hundred kilogram) per cubic metre with 20mm ( twenty millimetre) nominal size graded crushed stone aggregate and curing complete including cost of form work but excluding the cost of reinforcement for reinforced concrete work in deck slab, wheel guard etc. as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidential . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Providing and fixing of typical PMGSY informatory sign board with logo as per M.O.R.D. specification and drawing . Three MS plates of 1.6 mm ( one point six millimetre) thick top and middle plate duly welded with MS flat iron 25mmx5mm ( twenty five millimetre into five millimetre) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm ( twenty five millimetre into twenty five millimetre into five millimetre). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 Nos. ( Two Nos.) 75mmx75mm (seventy five millimetre into seventy five millimetre) of 12 SWG ( twelve standard wire gauge) sheet tubes posts duly embedded in cement concrete M-15 ( M fifteen) grade blocks of 450mmx450mmx600mm ( four hundred fifty millimeters into four hundred fifty millimeters into six hundred millimeters), 600mm ( six hundred millimeters) below ground level. Including mechanically mixed and vibrated. The top most diamond plate will be welded to middle plate by 47mmx47mm ( forty seven millimeter into forty seven millimeters) of 12 SWG ( twelve standard wire gauge) steel plate tube. All MS will be stove enameled on both sides. Lettering and printing, arrows, borders etcetera will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and M.O.R.D. technical specifications section 1700 and as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Reinforced cement concrete mechanically mixed and vibrated M-15 (M-Fifteen) grade fifth kilometre stone/ precast stone of standard design as per IRC : 8 ( eight) Fixing in position including painting and printing etcetera as per drawing and M.O.R.D. technical specification Clause 1703 ( ordinary kilometre stone precast). Including hauling of materials in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST

Reinforced cement concrete mechanically mixed and vibrated M-15 (M-Fifteen) grade kilometre stone/ local stone of standard design as per IRC : 8 ( eight) Fixing in position including painting and printing etcetera as per drawing and M.O.R.D. technical specification Clause 1703 ( ordinary kilometre stone precast). Including hauling of materials in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Reinforced cement concrete mechanically mixed and vibrated M-15 (M-Fifteen) grade kilometre stone/ local stone of standard design as per IRC : 8 ( eight) Fixing in position including painting and printing etcetera as per drawing and M.O.R.D. technical specification Clause 1703 (200 Mtrs.) ( two hundred ) metre stone precast). Including hauling of materials in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST .

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board 600mm (Six hundred milimetres ) equilateral triangle as per IRC:67 made of 1.5mm (One point five milimetres) thick M.S. (mild steel) sheet duly stove white colour in front and grey colour on back with red reflective border of 65mm (sixty five milimetres) width and required letters and figures with reflective tape engineering grade as per clause 1701.3.9 of MORD for rural roads or required shade and colour supported and welded on 47mmx47mm of 12 SWG (forty seven milimetres into forty seven milimetres) of (twelve standard wire gauge) sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 (M-Fifteen) grade cement concrete 450x450x600mm (Four hundred fifty into four hundred fifty into six hundred milimetres) 600mm (six hundred milimetres) below ground level as per drawing and MORD technical specifications section 1700, Including hauling of materials in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board 600mm (Six hundred milimetres ) circular as per IRC:67 made of 1.5mm (One point five milimetres) thick M.S. (mild steel) sheet duly stove white colour in front and grey colour on back with red reflective border of 65mm (sixty five milimetres) width and required letters and figures with reflective tape engineering grade as per clause 1701.3.9 of MORD for rural roads or required shade and colour supported and welded on 47mmx47mm of 12SWG (forty seven milimetres into forty seven milimetres) of (twelve standard wire gauge) sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 (M-Fifteen) grade cement concrete 450x450x600mm (Four hundred fifty into four hundred fifty into six hundred milimetres) 600mm (six hundred milimetres) below ground level as per drawing and MORD technical specification section 1700, Including hauling of materials in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Providing and erecting directions and place identification retro reflectorised sign up to 0.90 sqm (Zero decimal ninety square metres) size as per IRC:67 made of encapsulated lens type reflective sheeting vide M.O.R.D. technical specifications clause 1701.2.3 fixed over aluminum sheeting 2mm (Two milimetres) thick with area not exceeding 0.9 sqm (Zero decimal nine square metres) supported on a mild steel single angle iron post 75x75x6mm (Seventy five into seventy five into six milimetres) 2 Numbers (Two Numbers) firmly fixed to the ground by means of properly designed foundation with M-15 (M-fifteen) grade 1:2½: 5 (One cement : two and half sand : five graded crushed/ broken stone aggregate 20mm (Twenty milimetres) nominal size) cement concrete 450mmx450mm x600mm (Four hundred fifty milimetres into four hundred fifty milimetres into six hundred milimetres) and 600mm (Six hundred milimetres) below ground level as per drawings and MORD technical specifications section 1700 including painting, angle iron, posts with primer and two coats of epoxy paint including hauling of materials in all leads and lifts and other incidental or as per entire satisfaction and direction of Engineer-in-Charge. Including carriage of material within all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Providing and erecting directions and place identification of semi reflective maintenance sign boards as per IRC:67 made of 2mm (Two milimetres) thick M.S. sheet duly/stove enameled paint white colour in front and grey colour on back with reflective tape of engineering grade as per MORD specifications of required shade and colour supported and welded on two numbers 47mmx47mm (Forty seven milimetres) into forty seven milimetres) of 12SWG (twelve standard wire gauge) square tube of 3050mm (three thousand fifty milimetres) height duly strengthened by 25mmx5mm (Twenty five milimetres into five milimetres) M.S. flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 (M-Fifteen) grade cement concrete 450mmx600mm (four hundred fifty milimetres into six hundred milimetres) 600mm (six hundred milimetres) below ground level as per drawing and MORD technical specification section 1700, including hauling of materials in all leads and lifts and other incidental or as per entire satisfaction and direction of Engineer-in-Charge. Including carriage of material within all leads and lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Providing and fixing Guard stone/ Boundary pillar made of Reinforced cement concrete/ local stone of standard design as per IRC:25 on curves fixed in position including finishing and lettering but excluding painting as per drawing and MORD technical specification Clause 1704, as per entire satisfaction and direction of Engineer-in-Charge. Including carriage of material within all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Providing and Fixing pavement marker (Cat eyes) made out of ABC 3 M (three) plastic of size 128x110x29.5 mm ( one hundred twenty eight into one hundred ten into twenty nine decimal five millimetres) without nail having 50mm ( fifty millimetres) stem of ABS . The pavement marker shall be installed with epoxy ABS as per specification including carriage of materials and equipment with all mode of transportation and as per direction of Engineer-in-charge including carriage of materials within all leads and lifts, other incidentals.The rate is including of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government excluding GST.

Providing and fixing road side delineator of height 600mm made of MS pipe of size 50mm of 1.6 SWG having High intensity micro prismatic reflective sheeting confirming to ASTM type-XI upto 300mm length Balance 300mm It shall be painted with synthetic enamel paint of alternate colour black & white strips. It shall be fixed with 30 x 30 x 30cm block with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded crushed stone aggregate 20mm nominal size complete in all respect as per specifications. The work shall be executed as per the direction of the Engineer- Incharge Including carriage of material within all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Painting lines, dashes, arrows, etcetera on roads in two coats on new work with ready mixed road marking paint conforming to IS: 164 on bitumeneous/ concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and technical specification clause 1702, as per entire satisfaction and direction of Engineer-in-Charge. including carriage of material within all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Collection of materials for bio-engineering techniques from appropriate approved species including trimming the stems and making the cuttings and transporting while wrapped in damp material as per entire satisfaction and direction of Engineer-in-Charge. including carriage of material within all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Planting unrooted hardwood cuttings (2.0 m in length and 3.0 to 8.0 cm in diameter) of appropriate approved species on slopes, including final preparation of cuttings, preparing lines, digging trenches to specified dimensions and forming fascines as per entire satisfaction and direction of Engineer-in-Charge. including carriage of material within all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST.

Road side tree planting containerzed tree and shurbs including potting, transplanting, compacting and mulching on slopes 30 degree to 60 degree pits size 30 cm diametre into 30cm depth. Providing and mixing compost with thre soil, Provisioning and applying of pesticides of required including labour abd transporation to the site as per entire satisfaction and direction of Engineer-in-Charge. including carriage of material within all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, or other taxes imposed by the Government excluding GST .

M/S CHANAN SINGH AND CO.

M/s Dinesh Construction Works

NISHCHAL MAHAJAN

V S Saini Contractor

rajat thakur