Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.7 LAccepted-AOC 0 BADRI ELECTRICALS NEAR SHRIGOR FALI NEAR ANADABAWA CHAKLO JAMNAGAR GUJARAT 361001 UDYAM GJ 10 0001822 | JAMNAGAR | GUJARAT | 361001 | L1 | Accepted-AOC L1 AND REASONABLE | |
| 2 | L2₹20.9 L+₹1.1 L (5.54%)Rejected-Finance 37 B SAHEB KRUPA SOC JIVAN CHETAN SCHOOL SAMA ROAD VADODARA GUJARAT PIN 390 008 | VADODARA | GUJARAT | 390008 | L2 | Rejected-Finance NOT L1 | |
| 3 | L3₹22.3 L+₹2.5 L (12.6%)Rejected-Finance | L3 | Rejected-Finance NOT L1 | |
| 4 | L4₹23.0 L+₹3.2 L (16.3%)Rejected-Finance | L4 | Rejected-Finance NOT L1 | |
| 5 | L5₹28.0 L+₹8.2 L (41.7%)Rejected-Finance | L5 | Rejected-Finance NOT L1 |
| Sl No | Description | Qty | Unit | Pratik Enterprise L2 | M/S JAYCONSTRUCTION CO L4 | M/S Super Steel Works L3 | M/S Badri Electicals L1 | PRAFUL ENTERPRISES L5 |
|---|---|---|---|---|---|---|---|---|
| 1.00Chair Dinning FD-69/228, 279 including | ||||||||
| 1.01 | M&L for removing unserviceable plastic cane and providing new plastic cane 2 to 2.5mm wide for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description( weaving shall be Godrej pattern) and all as directed by Engr-in-Charge and as shown on drg . | 1,011 | Each | 164 ₹1,65,804 | 207 ₹2,09,277 | 153 ₹1,54,683 Lowest | 165 ₹1,66,815 | 306 ₹3,09,366 |
| 1.02 | S&F 1 st class HW front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge. | 500 | Each | 55 ₹27,500 | 63 ₹31,500 | 53 ₹26,500 Lowest | 55 ₹27,500 | 66 ₹33,000 |
| 1.03 | S&F 1 st class HW rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge. | 510 | Each | 65 ₹33,150 Lowest | 72 ₹36,720 | 73 ₹37,230 | 65 ₹33,150 Lowest | 76 ₹38,760 |
| 1.04 | S&F 1 st class HW leg stiffner as per drg Including taking down stiffner all as specified and as directed by Engineer-in-Charge. | 350 | Each | 35 ₹12,250 | 36 ₹12,600 | 11 ₹3,850 Lowest | 34 ₹11,900 | 66 ₹23,100 |
| 1.05 | S&F 1 st class HW back stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge. | 360 | Each | 35 ₹12,600 | 36 ₹12,960 | 21 ₹7,560 | 34 ₹12,240 | 16 ₹5,760 Lowest |
| 1.06 | S&F triangular bracket 60x60x25 mm as per drg. | 4,000 | Each | 15 ₹60,000 | 18 ₹72,000 | 21 ₹84,000 | 14 ₹56,000 Lowest | 46 ₹1,84,000 |
| 1.07 | Removing unserviceable canning Patti of any side and S&F new canning Patti as per existing and asper drg. | 500 | Each | 45 ₹22,500 | 54 ₹27,000 | 31 ₹15,500 | 55 ₹27,500 | 26 ₹13,000 Lowest |
| 1.08 | S&F Nylon Buffers shoes fixed in repairs. | 4,044 | Each | 2 ₹8,088 Lowest | 2.7 ₹10,918.8 | 2 ₹8,088 Lowest | 3 ₹12,132 | 2.66 ₹10,757.04 |
| 2.00Chair Dinning FD-69/228, 279 PVC Seat | ||||||||
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
6 Apr 2026, 6:00 pmClosed
GE (A) JAMNAGAR
INFANTRY LINES JAMNAGAR
REPAIRS /MAINTENANCE INCLUDING POLISHING AND RE-CANNING OF WOODEN FURNITURE ITEMS HELD ON CHARGE OF BSO (A) JAMNAGAR AND ISSUED TO OFFR MD ACCN ,JCO/ORS MD ACCN AND OTM ACCN OF UNIT DEPLOYED UNDER HQ 31 INF BDE AT INF LINE,BG LINE JAMNAGAR.
2026_MES_756565_1
8226
Open Tender
Civil Works - Others
Item Rate
180 days
JAMNAGAR
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GE ARMY JAMNAGAR
₹80,000
29 May 2026
17 Mar 2026
8 Apr 2026
18 Mar 2026
6 Apr 2026
30 Mar 2026
Chair Dinning FD-69/228, 279 including
M&L for removing unserviceable plastic cane and providing new plastic cane 2 to 2.5mm wide for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description( weaving shall be Godrej pattern) and all as directed by Engr-in-Charge and as shown on drg .
S&F 1 st class HW front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW leg stiffner as per drg Including taking down stiffner all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW back stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.
S&F triangular bracket 60x60x25 mm as per drg.
Removing unserviceable canning Patti of any side and S&F new canning Patti as per existing and asper drg.
S&F Nylon Buffers shoes fixed in repairs.
Chair Dinning FD-69/228, 279 PVC Seat
Removing old seat and S&F PVC Seat as per drg.
S&F 1 st class HW front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW leg stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW rail as per drg Including taking down rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW back stiffner as per drg Including taking down old componant all as specified and as directed by Engineer-in-Charge.
S&F triangular bracket 60x60x25 mm, fixed in repairs as per drg.
S&F Nylon Buffers shoes fixed in repairs.
Chair Writing FD-280 /250/20
M&L for removing unserviceable plastic cane and providing new plastic cane 2 to 2.5mm wide for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description( weaving shall be Godrej pattern) and all as directed by Engr-in-Charge and as shown on drg .
S&F 1 st class HW front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW leg stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW back stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW armrest as per drg Including taking down old componant all as specified and as directed by Engineer-in-Charge.
Removing unserviceable canning Patti from any side and S&F new canning Patti as per existing and asper drg.
S&F 1st cl HW triangular bracket 60x60x25 mm as per drg, fixed in repair
S&F Nylon Buffers shoes fixed in repairs.
Chair Easy FD-229/17
M&L for removing unserviceable plastic cane from Seat and Back and providing new plastic cane 2 to 2.5mm wide for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description( weaving shall be Godrej pattern) and all as directed by Engr-in-Charge and as shown on drg . Taking down old can for seat and back and S&F nylon Canning as per drg.
S&F 1 st class HW front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW front / rear rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW back frame rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW side rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW armrest as per drg Including taking down old componant all as specified and as directed by Engineer-in-Charge.
h) Removing unserviceable canning Patti and S&F new canning Patti as per existing and as per drg.
g) S&F triangular bracket 60x60x25 mm, fixed in repairs as per drg.
S&F Nylon Buffers shoes fixed in repairs.
Chair WBB or BKB w/o arms FD-56, FD-285
Removing old seat and S&F new PLY Seat as per drg.
S&F 1 st class HW front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW leg stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW rail as per drg Including taking down rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW back stiffner as per drg Including taking down old componant all as specified and as directed by Engineer-in-Charge.
g) S&F triangular bracket 60x60x25 mm, fixed in repairs as per drg.
S&F Nylon Buffers shoes fixed in repairs.
REPAIRS TO CHAIR DINNING OFFICER (DRG NO FD/MAP-II/04 AND FD/06/MAP-10) M&L for removing unserviceable/broken part and S&F new part made out of 1st class hard wood teak (Teak wood )duly shaped as per drg included tightening the joints by pinning,screwing ,nailing glueing and placing every part intact all as specified in drg and Engr-in-Charge and as shown on drg.
Front leg as specified in the drawing
Rear leg as specified in the drawing
Stiffeners as specified in the drawing
Front/back/ side rail as specified in the drawing
S&F New Cushion 75mm thick 40 density with fabric fixed in repair on seat of 12mm thick ply of approved colour and quality
Back support as specified in the drg
S&F 1 class HW stopper 75x75x75mm as per drg fixed in repair
S&F new hard PVC shoe with screw & washer complete all as specified.
REPAIRS TO CHAIR DINNING WITH LONG BACK OFFICER M&L for removing unserviceable/broken part and S&F new part made out of 1st class hard wood teak (Teak wood )duly shaped as per drg included tightening the joints by pinning,screwing ,nailing glueing and placing every part intact all as specified in drg and Engr-in-Charge and as shown on drg.
Front leg as specified in the drawing
Rear leg as specified in the drawing
Stiffeners as specified in the drawing
Front/back/ side rail as specified in the drawing
S&F New Cushion 75mm thick 40 density Make: Sleepwell/Kurlon/Coolfoam or higher than curlon with fabric (Superior Quality )fixed in repair on seat of 12mm thick ply Make of approved colour and quality
Back support as specified in the drg
S&F 1 class HW stopper 75x75x75mm as per drg fixed in repair
S&F new hard PVC shoe with screw & washer complete all as specified.
REPAIRS TO CHAIR EASY WITH CUSHION
M&L for removing unserviceable broken rear legs and supply and fix new rear legs made out of 1st class hard wood teak suitabe for Chair writing all as directed by Engr-in-Charge and as shown on drg.
M&L for removing unserviceable broken front legs and supply and fix new front leg made out of 1st class hard wood teak suitable for Chair writing all as directed by Engr-in-Charge and as shown on drg.
M&L for removing unserviceable broken side/front/back member of chair and supply and fix new side/front/back member made out of 1st class hard wood teak and provide 3mm dia holes at a spacing of 10mm to 12.5mm centre to centre along the length of member for the purpose of canning suitable for Chair writing all as directed by Engr-in-Charge and as shown on drg.
M&L for removing unserviceable broken arms rest left or right of chair and supply and fix new arms rest left or right made out of 1st class hard wood teak shape and size suitable for Chair writing all as directed by Engr-in-Charge and as shown on drg.
S&F New Cushion 75mm thick 40 density with stitching with d in repair on seat of 12mm thick ply of approved colour and quality
REPAIR TO TEAPOY FD WOODEN FD-382
M & L for removing unserviceable/ broken legs and S & F new legs made out of first class teak wood suitable for repair to Teapoy all as specified and directed by Engr-in-Charge.
All as per srl item 5(f) here in before but long Rail/Stiffener/side rails
Removing of old unserviceable existing table top and S&F new table top pre-laminated particle board of 18/19mm thick as per approved shade BWP exterior grade of of make NOVAPAN/ARCHID LAM ISI marked including 4mm thick teak wood beading all around table top of Teapoy complete as per approved colour and shade all as directed by Engineer-in-Charge.
S&F new hard PVC shoe with screw & washer complete all as specified.
REPAIRS TO TABLE CENTRE FD-274/29(M)/235
Taking out old unserviceable top and S&F new top of pre-laminated particle board 18/19 mm thick exterior grade as per approved shade make NOVAPAN/ARCHID LAM/KIT LAM ISI marked of existing size and 4 mm thick teak wood edging all around for table top complete all as specified directed by Engineer-in-Charge.
Taking out old unserviceable broken long rails and S&F new long rails of 1st class teak wood (Teak) as per existing shape and size duly planned and finished including tightening of joint complete all as directed by Engineer-in-Charge.
Taking out old unserviceable broken short rails and S&F new short rails of 1st class hard wood (Teak) as per existing shape and size duly planned and finished including tightening of joint complete all as directed by Engineer-in-Charge.
Taking out old unserviceable broken legs and S&F new legs of 1st class hard wood (Teak) as per existing shape and size duly planned and finished including tightening of joint complete all as directed by Engineer-in-Charge.
S&F new hard PVC shoe with screw & washer complete all as specified.
REPAIR TO PEG TABLE FD 384
M & L for removing unserviceable/ broken legs and S & F new legs made out of first class teak wood suitable for repair to Peg Table all as specified and directed by Engr-in-Charge.
Removing of old unserviceable existing table top and S&F new table top pre-laminated particle board of 18/19mm thick as per approved shade BWP exterior grade of make NOVAPAN/ARCHID LAM ISI marked including 4mm thick teak wood beading all around table top of Peg Table complete all as directed by Engineer-in-Charge.
Removing of old unserviceable long rail and S&F new long rail of 1st class hard wood (TW) as per existing shape and size to peg table complete all as specified and directed by Engineer-in-Charge.
S&F new hard PVC shoe with screw & washer complete all as specified.
REPAIRS TO BED PLYWOOD TOP FD-247 & FD-246
M & L for removing unserviceable / broken leg from bed plywood top and S & F new leg made out of 1st class teak wood and made to shape and all as shown on drg and as directed by Engr-in-Charge.
M & L for removing unserviceable plywood from Head board of Bed plywood top and S & F new 4mm thick plywood one side teak face ( Natural teak) to both side of Head board including 15mm wide 6mm thick teak wood round beeding providing for both side of head board and 35mm wide 4mm thick teak wood beeding for top of head board and all as specified and as directed by Engr-in-Charge.
M & L for removing unserviceable plywood from Foot board of Bed plywood and S & F new 4mm thick plywood one side teak face ( Natural teak) to both side of Foot board including 15mm wide 6mm thick teak wood beeding providing both side of Foot board and 35mm wide 4mm thick teak wood beeding for top of the head board and all as specified and as directed by Engr-in-Charge.
M & L for removing unserviceable long rail from Bed plywood top and S & F new long rail made out of 1st class teak wood and made to shape and al as specified and as directed by Engr-in-Charge.
M & L for removing unserviceable centre rail from Bed plywood top and S & F new centre rail made out of 1st class teak wood and made to shape and al as specified and as directed by Engr-in-Charge.
S & F triangular shape corner bracket size 75X 75mm long and 25mm thick made out of 1st class teak wood to be fixed to legs to long rail of bed plywood top with 50mm wood screw 2 Nos for each bkt and all as directed by Engr-in-Charge.
M & L for removing old unserviceable/ wornout existing plywood top from Bed plywood top and S & F new 12mm thick plywood BWR grade Type AA of size 1940 X 915mm approved make and fixing it by minimum 18 Nos 30mm brass screw for each bed and all as specified and as directed by Engr-in-Charge.
M & L for polishing of bed plywood top with french polish for obtaining glossy finish including preparation of wooden surfaces by scrapping with sand paper & apply putty whereever required and as directedby Engr-in-Charge.
Table Dining 6 /8 Persons : FD-273, 239
S& F Top with 18/19mm prelaminated board Extrior Gde bothe side laminated of approved shade with 6mm thick teakwood beeding duly french polished including taking down old top as directed by Engineer-in-Charge.
S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class hw long Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW short Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW Triangular wooden bracket 100X100X20mm thick as per drg Including taking down old part all as specified and as directed by Engineer-in-Charge.
S&F new hard PVC shoe with screw & washer complete all as specified.
Table Writing/Medium/Study : FD-249 &FD-275
S& F Top with 18/19mm prelaminated board Extrior Gde bothe side laminated of approved shade with 6mm thick teakwood beeding duly french polished including taking down old top as directed by Engineer-in-Charge.
S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class hw foot rest as per drg including taking down old componant all as specified and as directed by Engineer-in-Charge.
S&F 1 st class hw stiffner as per drg including taking down old componant all as specified and as directed by Engineer-in-Charge.
S&F Sides of cabinet with 18mm thick ply wood BWP grade with 1.5mm thick lamination as per drg, all as specified and as directed by Engineer-in-Charge.
S&F 1 st class hw short rail as per drg including taking down old componant all as specified and as directed by Engineer-in-Charge.
S&F 1 st class hw front/long rail as per drg including taking down old componant all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW drawer as per drg Including taking down old drwaer complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.
S&F cabinet door with locking arrangement as per drg Including taking down old componant complete all as specified and as directed by Engineer-in-Charge.
Replacement of unserviceable veneer ply of cabinet i.e sides, back, front of cabinet with new veneer plywood BWR grade 4 mm thick as shown in drg all as specified and as directed.
S&F new hard PVC shoe with screw & washer complete all as specified
Table 3'X2' or 900X600mm with Drawer FD-41,224
S& F Top with 18/19mm prelaminated board Extrior Gde both side laminated of approved shade with 6mm thick teakwood beeding duly french polished including taking down old top as directed by Engineer-in-Charge.
S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class hw long Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW short Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW Long Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW short Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW drawer as per drg Including taking down old drwaer complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.
S&F new hard PVC shoe with screw & washer complete all as specified
Table 3'X2' or 900X600mm without Drawer FD-55/284/224/41(M)
S& F Top with 18/19mm prelaminated board Extrior Gde both side laminated of approved shade with 6mm thick teakwood beeding duly french polished including taking down old top as directed by Engineer-in-Charge.
S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class hw long Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW short Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW Long Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW short Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.
S&F new hard PVC shoe with screw & washer complete all as specified
Almirah Mess utensils : FD-93
Replacement of unserviceable veneer back ply with new veneer plywood BWR grade 6 mm thick as shown in drg all as specified and as directed.
Replacement of door shutter as shown in drg all as specified and as directed.
S&F 1 st class HW drawer as per drg Including taking down old drawer complete all as specified and as directed by Engineer-in-Charge.
Top with 18/19mm thick ply wood with 1.5mm thick lamination of approved shade with TW beeding as per drg.
S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.
Bin Linen Mulitpurpose : FD-2E6/MAP/09
Replacement of unserviceable veneer back ply with new veneer plywood BWR grade 6 mm thick as shown in drg all as specified and as directed.
Replacement of door shutter as shown in drg all as specified and as directed.
S&F 1 st class HW drawer as per drg Including taking down old drawer complete all as specified and as directed by Engineer-in-Charge.
Top with 18/19mm thick ply wood with 1.5mm thick lamination of approved shade with TW beeding as per drg.
S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.
S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.
Side Board : FD-241/371 /26(M)/MAP
Replacement of unserviceable veneer back ply with new veneer plywood BWR grade 6 mm thick as shown in drg all as specified and as directed.
Replacement of door shutter as shown in drg all as specified and as directed.
S&F 1 st class HW drawer as per drg Including taking down old drawer complete all as specified and as directed by Engineer-in-Charge.
Top with 18/19mm thick ply wood with 1.5mm thick lamination of approved shade with TW beeding as per drg.
S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.
S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs Allumandle as per drg.complete all as specified and as directed by Engineer-in-Charge.
Sofa set 4 seater with Arms Drg No. FD-258, 281, 373
M&L replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density (Make: Sleepwell/Kurlon/Coolfoam) as per drg.
Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new coushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.
S&F 1 st class HW front / rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.
Replacement of U/S 1 st class HW Batten of seat and back as per Drg.
Replacement of U/S 1 st class HW Arms as per Drg.
f) Replacement of U/S 1 st class HW front/rear/side rail of single seater of as per Drg.
S&F Nylon Buffers shoes fixed in repairs.
Sofa set 5 seater with Arms Drg No. FD-258, 281, 373,CWE(B)FD/0607
M&L replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density (Make: Sleepwell/Kurlon/Coolfoam) as per drg.
Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new coushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.
S&F 1 st class HW front / rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.
Replacement of U/S 1 st class HW Batten of seat and back as per Drg.
Replacement of U/S 1 st class HW Arms as per Drg.
f) Replacement of U/S 1 st class HW front/rear/side rail of single seater of as per Drg.
g) Replacement of U/S 1 st class HW front/rear rail of 3 seater of as per Drg.
h) Replacement of U/S side rail of 3 seater of as per Drg.
S&F Nylon Buffers shoes fixed in repairs.
Sofa Chair Single seater/Two seater with Arms Drg No. 281,
M&L replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density (Make: Sleepwell/Kurlon/Coolfoam) as per drg.
Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new coushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.
S&F 1 st class HW front / rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.
Replacement of U/S 1 st class HW Batten of seat and back as per Drg.
Replacement of U/S 1 st class HW Arms as per Drg.
f) Replacement of U/S 1 st class HW front/rear/side rail of single seater of as per Drg.
S&F Nylon Buffers shoes fixed in repairs.
Rack side Three spaces wooden WDE 27
S&F 1 st class HW Three Tray per drg Including taking down old Tray complete all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW shelf per drg Including taking down old Shelf complete all as specified and as directed by Engineer-in-Charge.
S&F 1 st class hw Rear Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class hw Front Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.
Hat Stand with Mirror FD-233, 288
S&F Mirror shall be of 6 mm thick approved quality , including taking down old mirror all as specified and as directed by Engineer-in-Charge.
Taking down old back ply and S&F 4mm thick commercial plywood all as specified and as directed
Taking down old front ply and S&F 4mm thick commercial plywood all as specified and as directed
Taking down old peg and S&F new pegs all as specified and as directed
Taking down old key hole and S&F new key hole all as specified and as directed
Replacement of unserviceable veneer ply of i.e s, front Hat Stand S&F with new veneer plywood BWR grade 4 mm thick as shown in drg all as specified and as directed.
Board Notice FD -99R
S&F sliding glass shutter of 6 mm thick including all joints and fixing as required as per drg and approved quality , including taking down old glass shutter all as specified and as directed by Engineer-in-Charge.
S&F Green blazer cloth fixed on 12mm thick soft as approved quality , including taking down old Green blazer cloth with soft board all as specified and as directed by Engineer-in-Charge.
Replacement of unserviceable veneer ply of i.e s, front Hat Stand S&F with new veneer plywood BWR grade 4 mm thick as shown in drg all as specified and as directed.
Table Dining 6 Persons FD-273
S& F Top with 18/19mm prelaminated board Extrior Gde bothe side laminated of approved shade with 6mm thick teakwood beeding duly french polished including taking down old top as directed by Engineer-in-Charge.
S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class hw long Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW short Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW Triangular wooden bracket 100X100X20mm thick as per drg Including taking down old part all as specified and as directed by Engineer-in-Charge.
S&F new hard PVC shoe with screw & washer complete all as specified.
Table Dining 8 Persons FD-273
S& F Top with 18/19mm prelaminated board Extrior Gde bothe side laminated of approved shade with 6mm thick teakwood beeding duly french polished including taking down old top as directed by Engineer-in-Charge.
S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class hw long Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW short Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW Triangular wooden bracket 100X100X20mm thick as per drg Including taking down old part all as specified and as directed by Engineer-in-Charge.
S&F new hard PVC shoe with screw & washer all as specified and as directed by Engineer-in-Charge.
Table Dinning 120X90cm FD/MAP-II/03
S& F Top with 18/19mm prelaminated board Extrior Gde both side laminated of approved shade with 6mm thick teakwood beeding duly french polished including taking down old top as directed by Engineer-in-Charge.
S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class hw long Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW short Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW Long Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW Triangular wooden bracket 100X100X20mm thick as per drg Including taking down old part all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW short Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.
S&F new hard PVC shoe with screw & washer complete all as specified
Table Dinning 600X600cm FD-95,293
S& F Top with 18/19mm prelaminated board Extrior Gde both side laminated of approved shade with 6mm thick teakwood beeding duly french polished including taking down old top as directed by Engineer-in-Charge.
S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class hw long Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW short Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW Long Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW short Stiffener as per drg Including taking down old stiffner complete all as specified and as directed by Engineer-in-Charge.
S&F new hard PVC shoe with screw & washer complete all as specified
REPAIRS TO BED PLYWOOD TOP DOUBLE BED CWE/FD/0612
M & L for removing unserviceable / broken leg from bed plywood top and S & F new leg made out of 1st class teak wood and made to shape and all as shown on drg and as directed by Engr-in-Charge.
M & L for removing unserviceable plywood from Head board of Bed plywood top and S & F new 4mm thick plywood one side teak face ( Natural teak) to both side of Head board including 15mm wide 6mm thick teak wood round beeding providing for both side of head board and 35mm wide 4mm thick teak wood beeding for top of head board and all as specified and as directed by Engr-in-Charge.
M & L for removing unserviceable plywood from Foot board of Bed plywood and S & F new 4mm thick plywood one side teak face ( Natural teak) to both side of Foot board including 15mm wide 6mm thick teak wood beeding providing both side of Foot board and 35mm wide 4mm thick teak wood beeding for top of the head board and all as specified and as directed by Engr-in-Charge.
M & L for removing unserviceable long rail from Bed plywood top Double Bed and S & F new long rail made out of 1st class teak wood and made to shape and al as specified and as directed by Engr-in-Charge.
M & L for removing unserviceable centre rail from Bed plywood top and S & F new centre rail made out of 1st class teak wood and made to shape and al as specified and as directed by Engr-in-Charge.
S & F triangular shape corner bracket size 75X 75mm long and 25mm thick made out of 1st class teak wood to be fixed to legs to long rail of bed plywood top with 50mm wood screw 2 Nos for each bkt and all as directed by Engr-in-Charge.
M & L for removing old unserviceable/ wornout existing plywood top from Bed plywood top and S & F new 12mm thick plywood BWR grade Type AA of size 1940 X 915mm approved make and fixing it by minimum 18 Nos 30mm brass screw for each bed and all as specified and as directed by Engr-in-Charge.
Table Dining 8 Persons 1800x900mm : CWE/IB/FD/0604
S& F Top with 18/19mm prelaminated board Extrior Gde bothe side laminated of approved shade with 6mm thick teakwood beeding duly french polished including taking down old top as directed by Engineer-in-Charge.
S&F 1 st class hw Leg as per drg including taking down old leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class hw long Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW short Rail as per drg Including taking down old rail all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW Triangular wooden bracket 100X100X20mm thick as per drg Including taking down old part all as specified and as directed by Engineer-in-Charge.
S&F new hard PVC shoe with screw & washer complete all as specified.
REPAIR TO TABLE OFFICE OFFICER WOODEN
Removing of old unserviceable existing top and S&F new table top of pre-laminated particle board 18/19mm thick exterior grade as per approved shade of make NOVAPAN ISI marked with 4mm thick teak wood other side balancing beading all around table top of table office clerk complete all as directed by Engineer-in-Charge.
Replacement of leg of teak wood, size shape design as in drawing for table office clerk wooden all as directed by Engineer-in-Charge.
Repalcement of long rail made out of teak wood, size, shape design as in drawing for table office clerk wooden all as directed by Enigneer-in-Charge.
Replacement of drawer made of teak wood size, shape design as in drawing for table office clerk wooden including 35mm dia knob all as directed by Engineer-in-Charge.
S&F new hard PVC shoe with screw & washer complete all as specified.
S&F 1 st class HW Triangular wooden bracket 100X100X20mm thick as per drg Including taking down old part all as specified and as directed by Engineer-in-Charge.
S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.
REPAIR TO TABLE OFFICE CLERK WOODEN
Removing of old unserviceable existing top and S&F new table top of pre-laminated particle board 18/19mm thick exterior gradeas per approved shade of make NOVAPAN ISI marked with 4mm thick teak wood other side balancing beading all around table top of table office clerk complete all as directed by Engineer-in-Charge.
Replacement of leg of teak wood, size shape design as in drawing for table office clerk wooden all as directed by Engineer-in-Charge.
Repalcement of long rail made out of teak wood, size, shape design as in drawing for table office clerk wooden all as directed by Enigneer-in-Charge.
Replacement of drawer made of teak wood size, shape design as in drawing for table office clerk wooden including 35mm dia knob all as directed by Engineer-in-Charge.
S&F 1 st class HW Triangular wooden bracket 100X100X20mm thick as per drg Including taking down old part all as specified and as directed by Engineer-in-Charge.
S&F in repairs Knob as per drg.complete all as specified and as directed by Engineer-in-Charge.
Stool Dressing CB FD-DB 6115 FD 27,252/282 including
M&L for removing unserviceable plastic cane and providing new plastic cane 2 to 2.5mm wide for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description( weaving shall be Godrej pattern) and all as directed by Engr-in-Charge and as shown on drg .
S&F 1 st class HW front leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW rear leg as per drg Including taking down leg all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW leg stiffner as per drg Including taking down stiffner all as specified and as directed by Engineer-in-Charge.
S&F 1 st class HW back stiffner as per drg Including taking down old stiffner all as specified and as directed by Engineer-in-Charge.
S&F triangular bracket 60x60x25 mm as per drg.
Removing unserviceable canning Patti of any side and S&F new canning Patti as per existing and asper drg.
S&F Nylon Buffers shoes fixed in repairs.
REPAIR TO TABLE DRESSING LADIES FD FD-251/378/278 Taking down old UNSV existing parts of table dressing ladies and replacement of the same with S&F of new parts made to shape fixed in position all as shown on drg :-
Replacement of top of table dressing ladies, Top shall be of 19mm thick commercial particle board over which 1.5mm thick plastic laminated sheet is fixed all as specified and directed by Engineer-in-Charge.
-do- but sides of 19mm thick teak wood plank
-do- but bottom of 19mm thick teak veneer face on one side other side commercial particle board all as specified and directed by Engineer-in-Charge.
-do- but mirror of size 355x1220mm and 5.5mm thick make Modi Guard/Atul
-do- but leg of size 150x45x45mm
.-do- Back shall be 12mm thick particle board with commercial ply on both side.
.-do- but sliding glass shutter with wheel.
side and back of drawer shall be of 12mm thick teak wook plank. Bottom of drawer shall be of 6mm thick commercial plywood. Front of drawer shall be 19mm thick particle board over which 1.5mm thick plastic laminated sheet is fixed 3mm thick teak wood edging shall be provided to all sides, front and edges of drawers, Teak wood vertical support out of 45mmx45mm provided the back of mirror all as specified and directed by Engineer-in-Charge.
REPAIR TO TABLE DRESSING GENTS Fd 07-04-2023 Taking sown old UNSV existing parts of table dressing Gents and replacement of the same with S&F of new parts made to shape fixed in position all as shown on drg :-
Replacement of top shown on drg all as specified and directed by Engineer-in-Charge.
-do- but sides of 12mm thick particle board all as specified and directed by Engineer-in-Charge.
-do- but bottom of 12mm thick teak veneer face on one side other side commercial particle board all as specified and directed by Engineer-in-Charge
-do- but mirror of size 410x790 and 5.5mm thick make Modi Guard/Atul, all as specified and directed by Engineer-in-Charge.
One nob of aluminium anodized shall be provided to each drawer all as specified and directed by Engineer-in-Charge.
REPAIRS TO CHAIR DINNING OFFICER (DRG NO CWE()/FD/0611 M&L for removing unserviceable/broken part and S&F new part made out of 1st class hard wood teak (Teak wood )duly shaped as per drg included tightening the joints by pinning,screwing ,nailing glueing and placing every part intact all as specified in drg and Engr-in-Charge and as shown on drg.
Front leg as specified in the drawing
Rear leg as specified in the drawing
Front/back/ side rail as specified in the drawing
S&F New Cushion 75mm thick 40 density with fabric fixed in repair on seat of 12mm thick ply of approved colour and quality
Back support as specified in the drg
S&F 1 class HW stopper 75x75x75mm as per drg fixed in repair
S&F new hard PVC shoe with screw & washer complete all as specified.
REPAIRS TO TABLE CENTRE TWO TIER CWE B/FD/613
Taking out old unserviceable top and S&F new top (for table Top )of pre-laminated particle board 18/19 mm thick exterior grade as per approved shade make NOVAPAN/ARCHID LAM/KIT LAM ISI marked of existing size and 4 mm thick teak wood edging all around for table top complete all as specified directed by Engineer-in-Charge.
Taking out old unserviceable top and S&F new top (for table bottom) of pre-laminated particle board 18/19 mm thick exterior grade make NOVAPAN/ARCHID LAM/KIT LAM ISI marked of existing size and 4 mm thick teak wood edging all around for table fi top complete all as specified directed by Engineer-in-Charge.
Taking out old unserviceable broken long rails and S&F new long rails of 1st class teak wood (Teak) as per existing shape and size duly planned and finished including tightening of joint complete all as directed by Engineer-in-Charge.
Taking out old unserviceable broken short rails and S&F new short rails of 1st class hard wood (Teak) as per existing shape and size duly planned and finished including tightening of joint complete all as directed by Engineer-in-Charge.
S&F 1 class HW stopper 75x75x75mm as per drg fixed in repair
S&F new hard PVC shoe with screw & washer complete all as specified.
REPAIR TO TABLE Marble Top FD-133,1015
S&F newMarble top as per size mentionned in drawing with complete fixture all as directed by Engineer-in-Charge.
Replacement of leg of teak wood, size shape design as in drawing for table marble top all as directed by Engineer-in-Charge.
Repalcement of long rail made out of teak wood, size, shape design as in drawing for table office clerk wooden all as directed by Enigneer-in-Charge.
Replacement of short rail of teak wood size, shape design as in drawing for table marble top wooden including 35mm dia knob all as directed by Engineer-in-Charge.
S&F 1 class HW stopper 75x75x75mm as per drg fixed in repair
S&F new hard PVC shoe with screw & washer complete all as specified.
REPAIRS TO Desk FD
Removing of old unserviceable top of Desk STA of size 1220mmx530mm and 170mm high in front and 220mm high at back. The back od desk shall be 6mm thick MDF board of 6mm thick pre-laminated particle board with teak veneer shade as directed by Engineer-in-Charge.
Removing of unserviceable short stiffeners 380mm long joining and legs in short side at 100mm from bottom of legs and shall be provided of 25mm dia mil steel tube of 1.6mm wall thickness all as directed by Engineer-in-Charge.
M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted and applying French polish of walnut shade as per of approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed Desk FD
Repair to Stool Dressing with cushioned ,
M&L replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density (Make: Sleepwell/Kurlon/Coolfoam) as per drg.
Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new coushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.
S&F 1 class HW stopper 75x75x75mm as per drg fixed in repair
S&F new hard PVC shoe with screw & washer complete all as specified.
Repair to trestle Store Room Wooden of size 2440x 1220x6mm
M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted and applying two or more coat of French polish of dark walnut shade as per approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge for the following items
S&F 1 class HW stopper 100x100x100mm fixed in repair
Tigheting of loose joints in tops, legs and bracing of trestle store room wooden
POLISHING OF WOODEN FURNITURE:- M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted and applying French polish of walnut shade as per of approved quality to achieve uniform smooth texture and high glossy finish after filling holes with bees wax all as specified & as directed by Engr-in-Charge for the following items :-
Chair Dining (FD-269/279/228)
Chair Dining PVC Seat
Chair Writing FD-280/261
Chair Easy FD-229/17(M)/201
Chair Dinning officer
Chair WBB or BKB w/o arms FD-56, FD-285
Peg table FD-25/277/384
Table dining 8 pers FD-273/376/ 1115
Table dining 6 pers FD-273 /1115/274
Table dressing Gents with mirror FD-230`/291/294
Table writing/writing med FD-275/249/151
Teapoy FD-382/237/278/387
Table centreFD-274 /29(M)/235/375
Table Office clerk wooden DB-120
Table 3'X2' /900x600x760mm with drawer FD-231/223/234/284
Table 3'X2' /900x600x760mm without drawer FD-231/223/234/284
Sofa Set 5 seater FD-281,FD/MAP/II/02
Sofa set 4 seater FD-281
Sofa Chair single seater FD-281
Stool Dressing CB FD-DB 6115 FD 27,252/282
Table office officer wooden WDF-2973
Table 3'x3'/900x900x760mm FD-88/291
Table 600x600x760mm FD-95/293
Table Dining 8 Persons 1800x900mm : CWE/IB/FD/0604
Table Dining 6 Persons 1800x900mm : CWE/IB/FD/0605
Rack Rifle wooden
Trestle store room wooden FD-86M
Table Dinning Ors wooden
Bed Plywood Top Double Bed
Almirah Large Wooden
Almirah Med Wooden
Almirah Med Wooden 1/2H and 1/2S
Almirah Mess utensils : FD-93
Hat Stand with Mirror FD-233, 288
Rack side Three spaces wooden WDE 27
Rack Map Wooden FD2M
Rack Letter FD-80
Rack Laundry FD-85 FD-87
Rack Stores/Record of size 7'6"x5'6"
Table 12'x3' w/o Drawer
Table Card
Stool 2' height wooden
Rack for Record 6'x2'x6'
Table Dinning Ors wooden
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
BOQ_847469.xls
BOQ • 0.53 MB
8226tenderfurniture.pdf
Tender Documents • 1.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .