Various types of BONNET Welding for TOA Valve Assy FAVTA4881.

Select, Excess (+), Less (-)

Tender Inviting Authority: P BALAKUMAR

Name of Work:Various types of BONNET Welding for TOA Valve Assy.

Contract No: FAVTA4881

Name of the Bidder/ Bidding Firm / Company : Vendor Code:

Sl. No. Material Description Material Code Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate In Figure (INR- Indian Rupee) / Unit GST (If applicable in Percentage) GST Amount in Rs. P SCOPE HSN / SAC Code

BONNET-W012 931113710000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite and stainless steel hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-L001 931117140000 No Excess(+) Full Conversion INR 1) Clean the hardfacing area. 2) Hardfacing the seat as per wps A.1.H.02. 3) Stress releiveing as per wps A.1.H.02. 4) Chuck the smaller dia part.Turn face and od(except taper) as per drawing. 5) Chuck the larger dia part.Turn od,radius & threding as per drawing. 6) OD taper turning 7) Conduct LPI on hardfacing area. 8) Mill the groove as per drawing. 9) Punch material code ant firm code 10) Final inspection.

BONNET-L006 931117150000 No Excess(+) Full Conversion INR 1) Clean the hardfacing area. 2) Hardfacing the seat as per wps A.5.H.01. 3) Stress releiveing as per wps A.5.H.01. 4) Chuck the smaller dia part.Turn face and od(except taper) as per drawing. 5) Chuck the larger dia part.Turn od,radius & threding as per drawing. 6) OD taper turning. 7) Conduct LPI on hardfacing area. 8) Mill the groove as per drawing. 9) Punch material code ant firm code 10) Final inspection.

BONNET-L025 931117160000 No Excess(+) Full Conversion INR 1) Clean the hardfacing area. 2) Hardfacing the seat as per wps A.1.H.02. 3) Stress releiveing as per wps A.1.H.02. 4) Chuck the smaller dia part.Turn face and od(except taper) as per drawing. 5)Chuck the larger dia part.Turn od,radius & threding as per drawing. 6) OD taper turning. 7) Conduct LPI on hardfacing area. 8) Mill the groove as per drawing. 9) Punch material code ant firm code 10) Final inspection.

BONNET-L028 931117170000 No Excess(+) Full Conversion INR 1) Clean the hardfacing area. 2) Hardfacing the seat as per wps A.5.H.01. 3) Stress releiveing as per wps A.5.H.01. 4) Chuck the smaller dia part.Turn face and od (except taper)as per drawing. 5) Chuck the larger dia part.Turn od,radius & threding as per drawing. 6)OD taper turning. 7) Conduct LPI on hardfacing area. 8) Mill the groove as per drawing. 9) Punch material code ant firm code 10) Final inspection.

BONNET-L049 931117180000 No Excess(+) Full Conversion INR 1) Clean the hardfacing area. 2) Hardfacing the seat as per wps A.1.H.02. 3) Stress releiveing as per wps A.1.H.02. 4) Chuck the smaller dia part.Turn face and od(except taper) as per drawing. 5) Chuck the larger dia part.Turn od,radius & threding as per drawing. 6) OD taper turning. 7) Conduct LPI on hardfacing area. 8) Mill the groove as per drawing. 9) Punch material code ant firm code 10) Final inspection.

BONNET-L052 931117190000 No Excess(+) Full Conversion INR 1) Clean the hardfacing area. 2) Hardfacing the seat as per wps A.5.H.01. 3) Stress releiveing as per wps A.5.H.01. 4) Chuck the smaller dia part.Turn face and od(except taper) as per drawing. 5) Chuck the larger dia part.Turn od,radius & threding as per drawing. 6) OD taper turning 7) Conduct LPI on hardfacing area. 8) Mill the groove as per drawing. 9) Punch material code ant firm code 10) Final inspection.

BONNET-L053 931117200000 No Excess(+) Full Conversion INR 1) Clean the hardfacing area. 2) Hardfacing the seat as per wps A.1.H.02. 3) Stress releiveing as per wps A.1.H.02. 4) Chuck the smaller dia part.Turn face and od(except taper) as per drawing. 5) Chuck the larger dia part.Turn od,radius & threding as per drawing. 6) OD taper turning. 7) Conduct LPI on hardfacing area. 8) Mill the groove as per drawing. 9) Punch material code ant firm code 10 Final inspection.

BONNET-L056 931117210000 No Excess(+) Full Conversion INR 1) Clean the hardfacing area. 2) Hardfacing the seat as per wps A.5.H.01. 3) Stress releiveing as per wps A.5.H.01. 4) Chuck the smaller dia part.Turn face and od(except taper) as per drawing. 5) Chuck the larger dia part.Turn od,radius & threding as per drawing. 6) OD taper turning. 7) Conduct LPI on hardfacing area. 8) Mill the groove as per drawing. 9) Punch material code ant firm code 10) Final inspection.

BONNET-G003 931118780000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite and stainless steel hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-G013 931118790000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite and stainless steel hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-G076 931119510000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite and stainless steel hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-G092 931120080000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite and stainless steel hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-G089 931120090000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite and stainless steel hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-G002 931120500000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite and stainless steel hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-G004 931121860000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite and stainless steel hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-R057 931131180000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite and stainless steel hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-R060 931131190000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite and stainless steel hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-R033 931131220000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite and ss overlay area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning 5) Mark the tap holes as per drg. 6) Drill & tap as per marking.(Choose standard pitch) 7) Punch material code and firm code. 8) Final inspection.

BONNET-W425 931134710000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite and stainless steel hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-G145 931134730000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite and stainless steel hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-G148 931134740000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite and stainless steel hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-L153 931135050000 No Excess(+) Full Conversion INR 1) Clean the hardfacing area. 2) Hardfacing the seat as per wps A.1.H.02. 3) Stress releiveing as per wps A.1.H.02. 4) Chuck the smaller dia part.Turn face and od (except taper)as per drawing. 5) Chuck the larger dia part.Turn od,radius & threding as per drawing. 6) OD taper turning. 7) Conduct LPI on hardfacing area. 8) Mill the groove as per drawing. 9) Punch material code ant firm code 10) Final inspection.

BONNET-L156 931135060000 No Excess(+) Full Conversion INR 1) Clean the hardfacing area. 2) Hardfacing the seat as per wps A.5.H.01. 3) Stress releiveing as per wps A.5.H.01. 4) Chuck the smaller dia part.Turn face and od (except taper)as per drawing. 5) Chuck the larger dia part.Turn od,radius & threding as per drawing. 6) OD taper turning. 7) Conduct LPI on hardfacing area. 8) Mill the groove as per drawing. 9) Punch material code ant firm code 10) Final inspection.

BONNET-L097 931135070000 No Excess(+) Full Conversion INR 1) Clean the hardfacing area. 2) Hardfacing the seat as per wps A.1.H.02. 3) Stress releiveing as per wps A.1.H.02. 4) Chuck the smaller dia part.Turn face and od (except taper)as per drawing. 5) Chuck the larger dia part.Turn od,radius & threding as per drawing. 6)OD taper turning. 7) Conduct LPI on hardfacing area. 8) Mill the groove as per drawing. 9) Punch material code ant firm code 10) Final inspection.

BONNET-L100 931135080000 No Excess(+) Full Conversion INR 1) Clean the hardfacing area. 2) Hardfacing the seat as per wps A.5.H.01. 3) Stress releiveing as per wps A.5.H.01. 4) Chuck the smaller dia part.Turn face and od(except taper) as per drawing. 5) Chuck the larger dia part.Turn od,radius & threding as per drawing. 6) OD taper turning. 7) Conduct LPI on hardfacing area. 8) Mill the groove as per drawing. 9) Punch material code ant firm code 10) Final inspection.

BONNET-L089 931135090000 No Excess(+) Full Conversion INR 1) Clean the hardfacing area. 2) Hardfacing the seat as per wps A.1.H.02. 3) Stress releiveing as per wps A.1.H.02. 4) Chuck the smaller dia part.Turn face and od(except taper) as per drawing. 5) Chuck the larger dia part.Turn od,radius & threding as per drawing. 6) OD taper turning. 7) Conduct LPI on hardfacing area. 8) Mill the groove as per drawing. 9) Punch material code ant firm code 10) Final inspection.

BONNET 125/2500-L092 931135100000 No Excess(+) Full Conversion INR 1) Clean the hardfacing area. 2) Hardfacing the seat as per wps A.5.H.01. 3) Stress releiveing as per wps A.5.H.01. 4) Chuck the smaller dia part.Turn face and od(except taper) as per drawing. 5) Chuck the larger dia part.Turn od,radius & threding as per drawing. 6) OD taper turning. 7) Conduct LPI on hardfacing area. 8) Mill the groove as per drawing. 9) Punch material code ant firm code 10) Final inspection.

BONNET-R081 931150740000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite and ss overlay area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning 5) Mark the tap holes as per drg. 6) Drill & tap as per marking.(Choose standard pitch) 7) Punch material code and firm code. 8) Final inspection.

BONNET-R084 931150750000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite and ss overlay area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning 5) Mark the tap holes as per drg. 6) Drill & tap as per marking.(Choose standard pitch) 7) Punch material code and firm code. 8) Final inspection.

BONNET-V401 931198740000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od(except taper) and id as per drg. 2) Conduct LPI on stellite hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-V404 931198750000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od(except taper) and id as per drg. 2) Conduct LPI on stellite hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-V065 931198760000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning 5) Mark the tap holes as per drg. 6) Drill & tap as per marking.(Choose standard pitch) 7) Punch material code and firm code. 8) Final inspection.

BONNET-V068 931198770000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning 5) Mark the tap holes as per drg. 6) Drill & tap as per marking.(Choose standard pitch) 7) Punch material code and firm code. 8) Final inspection.

BONNET-V241 931202790000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning 5) Mark the tap holes as per drg. 6) Drill & tap as per marking.(Choose standard pitch) 7) Punch material code and firm code. 8) Final inspection.

BONNET-V244 931202800000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning 5) Mark the tap holes as per drg. 6) Drill & tap as per marking.(Choose standard pitch) 7) Punch material code and firm code. 8) Final inspection.

BONNET-W402 931215890000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od(except taper) and id as per drg. 2) Conduct LPI on stellite hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-W403 931215900000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Weld stellite 21 as per wps. 2) Stress releiving as per wps. 3) Stage inspection. 4) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 5) Conduct LPI on stellite area. 6) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 7) OD taper turning. 8) Punch material code and firm code. 9) Final inspection.

BONNET-W246 931216010000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od(except taper) and id as per drg. 2) Conduct LPI on stellite hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-W244 931216020000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od(except taper) and id as per drg. 2) Conduct LPI on stellite hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-WA01 931230360000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od(except taper) and id as per drg. 2) Conduct LPI on stellite hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-WA04 931230370000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od(except taper) and id as per drg. 2) Conduct LPI on stellite hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-WA09 931230380000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od(except taper) and id as per drg. 2) Conduct LPI on stellite hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-WA12 931230390000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od(except taper) and id as per drg. 2) Conduct LPI on stellite hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-WA17 931230400000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od(except taper) and id as per drg. 2) Conduct LPI on stellite hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-WA20 931230410000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od(except taper) and id as per drg. 2) Conduct LPI on stellite hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-WA25 931230420000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od(except taper) and id as per drg. 2) Conduct LPI on stellite hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-R593 931236460000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite and ss overlay area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning 5) Mark the tap holes as per drg. 6) Drill & tap as per marking.(Choose standard pitch) 7) Punch material code and firm code. 8) Final inspection.

BONNET-WB23 931240260000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od(except taper) and id as per drg. 2) Conduct LPI on stellite hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-WB26 931240270000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping. 1) Chuck on smaller dia part.Face and turn od(except taper) and id as per drg. 2) Conduct LPI on stellite hardfacing area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-WB82 931245000000 No Excess(+) Full Conversion INR 1) Chuck on smaller dia part.Face and turn od(except tpaer) and id as per drg. 2) Conduct LPI on stellite area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4)OD taper turning. 5) Punch material code and firm code. 6) Final inspection.

BONNET-V689 931253400000 No Excess(+) Full Conversion INR Full Scope as per drg,except lapping 1) Chuck on smaller dia part.Face and turn od (except taper)and id as per drg. 2) Conduct LPI on stellite area. 3) Chuck on larger dia part.Face and turn od and id as per drg. Maintain overall length as per drg.Cut threads as per drg. 4) OD taper turning 5) Mark the tap holes as per drg. 6) Drill & tap as per marking.(Choose standard pitch) 7) Punch material code and firm code. 8) Final inspection.

Total in Figures

Quoted Rate in Figures Select %

Quoted Rate in Words

Please Enable Macros to View BoQ information