BID DOCUMENTS FOR DEVELOPMENT WORK OF ICONIC ROAD AT OLD INDORE ROAD OF DAHOD NAGARPALIKA. UNDER: SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKAS YOJANA (ICONIC ROAD) GRANT. YEAR: 2025-26.

Total Amount Rs.

Note : 4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor President Chief Officer

Dahod Nagarpalika Dahod Nagarpalika

SBD SECTION-7 BILL OF QUANTITIES-269

DAHOD NAGARPALIKA, DAHOD

ESTIMATE FOR CONSTRUCTION WORK OF ASPHALT ROAD WIDENING AT OLD INDORE ROAD , AT DAHOD

Item Qty. Description Unit Amount

1 1152.00 Box Cutting the Road Surface to proper slope and

Cmt camber for making a base for road work including

removing the excavated stuff and dipositing to road

slope as directed all lead and lift etc. complete upto

2 480.00 Providing and laying compacted 150 mm thick B.T.

Cmt Metalling (40 to 63 mm size) using Stone screening

mm of 0.16 Cmt./10 Smt. and 0.08 Cmt./10 Smt., Stone

Dust including spreading in uniform layer, watering and

consolidation by vibratory roller achived the desired

density, as per clause.404 of M.O.R.T. & H. specification

3 720.00 Providing and Laying Bituminous Grout 75 mm thick

M.T. compacted in single layer with using B.T. chips of

required gradation and asphalt VG-30 grade at 1.99%

by wright of mix or mixing and 4.00 Kg./10 Smt. asphalt

VG-30 for tack coat & using B.T. chips of required

gradation including cleaning and heating asphalt premix

material bt drum mix process in proper gradation and

laying with paver finisher including rolling and

consolidation with 8-10 tonne vibratory roller and

providing all material, equipment, tools and plants, fire

wood, oil, kerosene, labour charges etc. complete using

contractor's own machineries, drum mix plant and

paver finisher etc. complete.

4 396.00 Providing and Laying 37.50 mm thick Bituminous

M.T. Macadam with B.T. aggregate as Per MORT & H.

specification & asphalt for tack coat @ 2.50 Kg./10 Smt.

with Mechanical Sprayer & Bitumen Grade 60/70 for

mixing @ 34.00 Kg./M.T. i.e., 3.40 % of total weight of

mix including heating the aggregate & asphalt in

continous batching drum mix plant and spreading the

same by paver finisher & consolidation with vibratory

roller including providing all materials equipments,

tools & plants, fire wood, oil, kerosene, labour charges

etc. complete using contractor's own machinery drum

mix plant & paver finisher etc. complete.

SBD SECTION-7 BILL OF QUANTITIES-270

5 966.00 Providing and Laying 25mm thick S.D.B.C. with B.T

M.T. Aggregate as per M.O.R.T and H. specificaton and (VG

30) asphalt grade 60/70 mixing at 50 kg/M.T. i.e. 5.0%

by weight of total mix incuing heating the aggregate and

asphalt in continous batching drum mix plant and

spreading the same by paver finisher and consolidation

with vibratory rollar including providing all materials

equipments, tols and plants, fire wood, oil, kerosene,

labour charges etc. complete using contractor own

machinary drum mix plant and paver finisher etc.

6 16800.00 Providing and laying Bituminous Painting spreading hot

Smt asphalt at the rate of 5 Kg./10 Smt. and spreading flushing

sand or stone dust at the rate of 0.15 Cmt./10 Smt. rate

including all cost of sand, equipment T & P firewood, oil,

kerosene, labour charges etc. complete by using

contractor's own machineries.

7 900.00 Supplying and fixing reinforced concrete heavy duty non-

Rmt pressure pipes with collars for culverts carrying heavy

traffic as per IS 458-1991 specifications including setting

the pipes in C.M. 1:2 watering and laying (to level or

slopes) of class NP3 of following internal daimeters.(ii)

450mm dia.. For Utility Shifting

Add 2 % Contengency Charges

Add 1 % Quality Controll Charges

SBD SECTION-7 BILL OF QUANTITIES-271

DAHOD NAGARPALIKA DAHOD

ESTIMATE FOR CONSTRUCTION WORK OF PAVER BLOCK & KERBING AT OLD INDORE ROAD , AT

Qty. Description Unit Amount

1 960.00 Excavation for foundation in Loose or soft soil 1:5

Cmt. mt. Depth including sorting out and stacking of

useful materials and depositing of the excavated

stuff for all the leads and lift etc. complete as

directed by Engineer-in-charge.

a) 0.00 to 1.50 M. depth 125.86 Cmt.

2 550.00 Providing and laying cement concrete 1:4:8 (1-

Cmt. Cement : 4- coarse sand : 8- hand broken stone

aggregates 40 mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth 2679.92 Cmt.

3 4800.00 Providing and fixing pre-cast concrete kerb stone of

Rmt. gray cement based concrete block 30cm

length,30cm height and 15cm thick of M200 grade

concret as per approved design and including

excavation for fixing in proper line and level,filling

the joint with C:M 1:3 (1cement:3fine sand) etc

For Kerbing 412.13 Rmt.

4 5500.00 Providing and fixing pre-cast Rubber Dye inter

Smt locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed by

mechanically pressed and as per approved design

including 75mm Sand layer for levelling and filling

the joint with sand in proper line and level etc

complete. 702.02 Smt

Add : 18% GST, Charges Rs.

Add : 2% Contingency Charges Rs.

SBD SECTION-7 BILL OF QUANTITIES-272

Add : 1% Quality Controll Rs.

SBD SECTION-7 BILL OF QUANTITIES-273

DAHOD NAGARPALIKA DAHOD

ESTIMATE FOR CONSTRUCTION WORK OF DIVIDER & M.S.PEDISTRAL FOR SCULPTURE AT OLD INDORE

ROAD, AT DAHOD.

Qty. Description Unit Amount

1 180.00 Excavation for foundation in Loose or soft soil 1:5 mt.

Cmt. Depth including sorting out and stacking of useful

materials and depositing of the excavated stuff for all the

leads and lift etc. complete as directed by Engineer-in-

a) 0.00 to 1.50 M. depth 125.86 Cmt.

2 60.00 Providing and laying cement concrete 1:4:8 (1- Cement :

Cmt. 4- coarse sand : 8- hand broken stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

3 Providing and laying controlled cement concrete M-200

and curing complete excluding the cost of formwork and

reinforcement of reinforced concrete work in.

a. 270.00 -- do -- for R.C.C Vertical Wall 4511.61 Cmt.

b. 15.50 -- do -- for Post for Sculpture 4590.39 Cmt.

4 14260.00 Providing TMT Bar FE 500D reinforcement for R.C.C. work

Kgs. including bending, binding and placing in position

complete upto floor two level 77.29 Kg.

5 3600.00 Providing Formwork of ordinary timber plankings so as to

Smt. give a rough finished including centering, shuttering,

struting and propping etc. height of propping and

centering below supporting floor to ceiling not exceeding

4.0 Mt. and removal of the same for cast in situ

reinforced concrete and plain concrete work.

For Vertical Wall 249.67 Smt.

SBD SECTION-7 BILL OF QUANTITIES-273

6 3460.00 Providing and applying 10 mm thick smooth cement

Smt. plaster in single coat of fair side of brick/concrete walls

for interior plastering for G.F. upto floor two level in

C.M.(1:3) (1 cement, 3 sand) including finishing even and

smooth with floating coat of neat cement slurry including

scaffolding curing etc. complete as directed by Engineer-

in-charge. 202.49 Smt.

7 2160.00 Painting line, deashes, arrow, letter etc on road, Air fields

Smt and like in two coats with road marking paint, brushing,

including cleaning the surface of all dirt, dust and other

foreign matter(1) over 10cm width 59.35 Smt

8 490.00 Filling in foundation and plinth with murrum or selected

Smt. soil in layers of 20cm. thickness including watering,

ramming and consolidating etc. complete. 273.07 Smt

9 1.00 PLANTING COST OF TREE IN DIVIDER AT ICONIC ROAD

Job 269317.76 Job

Add : 18% GST, Charges

Add : 2% Contingency Charges Rs.

Add : 1% Quality Controll Rs.

SBD SECTION-7 BILL OF QUANTITIES-274

DAHOD NAGARPALIKA DAHOD

NAME OF WORK :- ESTIMATE FOR 3D WALL PAINTING , PLANTATION AT OLD INDORE ROAD,

Item Qty. Description Total Unit Amount

1 4320.00 Providing Artistic 3D wall Painting on Godi road Bridge

Smt. location up to 10 Mtr Height 1484.70 Smt.

2 240.00 Providing Loam or Clay soil of approval quality on site.

Smt. 146.40 Smt.

3 1200.00 Laying out Lawn: After excavating soil upto 30 cm

Smt. depth, preparing soil for planting by supplying and

mixing pepairing soil for planting by supplying and

mixing Farm Yard Manure at the rate of 5 cu. m. per

100 Sq. Mt. area, providing and planting suckers of

pure dharo ( doob ) grass roughly at 10 cm x 10 cm

distance and maintaining till well established etc

complete ( about 45 days ). 72.62 Smt.

4 200.00 PLANTING TREES AND SHURBS After excavating pit of

Nos. the size 60 cm X 60 cm X 60 cm refilling with the same

by providing and mixing farm yard manure at the rate

of 0.06 cum per pit providing and planting well grown

sapling of specified variety and maintaining till well

established (about 45 days) complete. 121.45 Nos.

5 1125.00 STREET LIGHT BRACKET - Providing,

PER SQ.FT Supplying & Installation Decorative

Bracket With Lighting

Height 3 ft PER

Length 2.5 ft 676.70 SQ.FT

Add : 18% GST Rs.

Add : 2% Contingency Charges Rs.

Add : 1% Quality Controll Rs.

SBD SECTION-7 BILL OF QUANTITIES-275

DAHOD NAGARPALIKA - DAHOD

NIRMAL GUJARAT 2.0 (ICONIC ROAD)

NAME OF WORK : PROVIDING, ERECTING & INSTALLATION OF STREET LIGHT POLES

LOCATION : DEVELOPMENT WORK OF ICONIC ROAD AT OLD INDORE ROAD , AT DAHOD

Estimated Cost Rs.

Item No. & Description Qty. Unit Rate Per Amount

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm

or required depth for laying any size of cable or locating the fault all

over the run and back filling the same and making the surface as normal

Total 1200.00 Mtr. 75.75 Mtr.

(B) If additional machinery like hammer driller or JCB use [Add]

Total 250.00 Mtr. 357.54 Mtr.

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground / road surface for enclosing

(A)50 mm outer dia

Total 1200.00 Mtr. 62.62 Mtr.

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper

cable 1.1 KV grade to be erected as directed of following size.

(E) 3 core 2.5 Sq. mm

Total 1200.00 Mtr. 137.36 Mtr.

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection.

(iv) above 90 to 120 watts

Total 140.00 Nos. 6566.01 Ea.

SBD SECTION-7 BILL OF QUANTITIES-276

Item No. & Description Qty. Unit Rate Per Amount

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road crossing or floor of

following size of cables.

(A) 4 core 10 Sq. mm

Total 1200.00 Mtr. 676.70 Mtr.

(B) 4 core 16 Sq. mm

Total 1200.00 Mtr. 987.78 Mtr.

providing and erecting Miniature circuit breaker single pole 0.5A to 2A

system and having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark

Total 10.00 Nos. 270.68 Ea.

Pproviding and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed thermal

& magnetic release suitable to work on A.C. supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Total 10.00 Nos. 6173.12 Ea.

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board necessary IP-

42 and above protection as per approval from engineer incharge made

from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG

thick CRC M.S.sheet for internal partitions with necessary accesories

supporting angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter connecting

PVC copper wire / copper-aluminium strips, rubber grommets, rib,

bakelite control fuses/MCB for measuring instruments, earth bus &

earth bolts, foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and rubber

gasket,heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be supplied

with following approved manufacturers with following size

(B) The standard companies switch gear shall be used and only

manufacturers at CPRI approved factory

(i) with 350mm depth

Total 10.00 Sq.Mtr 17584.10 Sq.Mtr

SBD SECTION-7 BILL OF QUANTITIES-277

Item No. & Description Qty. Unit Rate Per Amount

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded

by highly conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate) & having

back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:-

< 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture

for long time Necessary test report must be submitted

[B] For Electrical installation up to 11 KV located in other than

normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

Total 10.00 Nos. 8636.51 Ea.

Supplying and erecting approved make Conical Pole (Medium Duty )

Made from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS 2629/2633/4759,

with required base plate and integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable terminations as erected on suitable

foundation (included) with necessary GI nut-bolts/J-Bolts. as per

details given by manufacturer considering site requirement.

The length of poles are as below.

(C) 5 Mtr. Long 70 mm Top X 145 mm bottom dia, 3 mm thickness.

Total 60.00 Nos. 8145.65 Ea.

(G) 9 Mtr. Long 70 mm Top X 205 mm bottom

dia, 3 mm thickness

Total 40.00 Nos. 16666.01 Ea.

Supplying and erecting street light pole bracket comprising main B

Class GI pipe of 4.2 cm/require outside dia. complete with suitable B

Class GI sleeve tubing of approx. 45cms.length and suitable for

76.5mm/80mm or require size pole top having sufficient fastners for

fixing the brackets and having suitable rise as per site condition as

directed and spread of 2 mtr.with suitable welded stiffener reducer and

with lock nut complete painted with one coat of Red oxide / PU base

primer and two coats of Aluminium / PU paint. Suitable for side entry

fitting brackets of following nos of arms.paint with following nos of

[a] Single Arm bracket 2 Mtr

Total 60.00 Nos. 795.88 Ea.

[B] Double Arm Bracket 2 Mtr.

Total 40.00 Nos. 1227.15 Ea.

SBD SECTION-7 BILL OF QUANTITIES-278

Item No. & Description Qty. Unit Rate Per Amount

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 60 x 60 x 150 cm. Deep in

below ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm)

high upper ground level with necessary curing and finishing in

approved manner.

( for 9 & 10 mtr pole)

Total 100.00 Ea. 1652.36 Ea.

Supplying & erecting approved make Digital time switch having lithium

cell 6 years operative and operate battery backup 1 channel day clock

with 14 memory programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time 1 minimum &

LCD display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic enclosure

& transparent cover erected as required with necessary connection

erected as directed.

Total 10.00 Nos. 3168.37 Nos.

Supplying & erecting power contactor ,AC3 duty for time switch

complete erected as per direction Cat III

[D] 4 pole 440V 40 Amp.

Total 10.00 Nos. 2782.55 Nos.

Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long

'B' grade G.I. pipe with necessary coupling buch buried in specially

prepared earth pit & G.I. earth wire of 8 SWG erected & connected as

Total 10.00 Nos. 823.15 Nos.

(D) LED Strip Light

(ii) Minimum 7.2W -240 LED per meter,(2 wire, IP-65) with non

integral suitable Driver complete Cat-lll

Total 1500.00 Mtr. 220.18 Mtr.

Total Amount Rs. ..............

Total Amount Rs. ..............

Add 18% GST Charge Rs…...…......

Add 3% Contigency Charge Rs…...…......

Net Amount Rs. ..............

SBD SECTION-7 BILL OF QUANTITIES-279

DAHOD NAGARPALIKA DAHOD

ESTIMATE FOR R.C.C BENCHES AT OLD INDORE ROAD , AT DAHOD.

Sr. Item Qauntity Total Rate Per Amount

1 Pre-cast Concrete Reinforced Bench . As 25.00 8080.00 No.

Per Directed Engi. In Charge excluding

Labour, Transpotation & All Taxes. Etc

Add : 5% of Transportation Charge Rs.

Add : 18% of GST Rs.

SBD SECTION-7 BILL OF QUANTITIES-280

DAHOD NAGARPALIKA DAHOD

NAME OF WORK: LED SCREENS AT OLD INDORE ROAD, AT DAHOD.

Sr. Qty. Unit Discription Total Unit Amount

1 supplying, installing, testing, and commissioning an advanced

outdoor LED display system with a 16:9 aspect ratio, made of

durable die-cast aluminium cabinets. The display will have a high-

resolution pixel pitch of up to 4 mm, a brightness of at least

nits, and IP65 protection for all-weather outdoor use. It is

designed for 24x7 continuous operation with wireless Wi-Fi

connectivity for remote content management. The scope includes

providing the mounting structure, power supply, cabling, earthing,

surge protection, and control system with software. Pixel Pitch:

Maximum 4 mm * Display Size: Length 281–290 cm, Height

191–200 cm * Brightness: Minimum 7000 nits (calibrated) * Life

of Light Source: 100,000 hours * Ingress Protection: IP65 (front

and rear) * Duty Cycle: 24 x 7 continuous operation *

Connectivity: Wireless Wi-Fi 802.11 b/g/n Finally, the system will

be tested, commissioned, and demonstrated, ensuring reliable

performance as per the Engineer-in-charge’s directions or any

2.00 Nos. concern authority. 1767500.00 Nos.

Add :- 18% of GST, Rs.

Add :- 1% of Qaulity Controll, Rs.

Add :- 2% of Contingency Charges, Rs.

SBD SECTION-7 BILL OF QUANTITIES-281

DAHOD NAGARPALIKA DAHOD

NAME OF WORK : ESTIMATE FOR ROAD FURNITURE AT OLD INDORE ROAD, AT DAHOD

SUB ESTIMATE :- FURNITURE

Qauntity Item Discription Total Rate Unit Amount

1 1680.00 Road marking with hot applied thermoplastic paints with

Smt. reflectorising glass beads on bitumin surface providing

and laying a hot applied thermoplastic compound

mm thick including reflectorising glass beads @ 250gms

per sqm area, thickness of 2.5mm is excluding of

surface applied glass beds as per IRC:35- 2015. The

finished surface to be level, uniform and free from

streaks and holes. zebra patta /bump patta lane/center

line/ edge line/cut patta. The white color marking should

provide liminance coefficinet on cemend road shalll be

min 130 mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service life during the day time.

The marking should meet the performance criteria for

night time reflectivity, wet reflectivity and skid resistance

as mentioned in the section-15 of IRC 35-2015.

Warranty for the Retro reflectivity should be two years.

2 2020.00 Supplying and fixing Cat eye (Stimsonite) made out from

Nos Acrilo beautile sterine ijunction high compressed molding

with reflector made of MMC ( Prismetic type of size

12cm x 6cm x 2.50cm) provided with betuminous

adhesive 100g. With each unit for fixing (High Intensity

Grade) 375.72 Nos

3 12.00 Direction (Junction) Sign :-Providing and fixing sign

Each boards made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size 244x122 cms.

rectangular as per design of IRC-67- 2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality

epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T.Specifications; 4.0mtr long (2 Nos.)

stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron

angle of 50 x 50 x 5mm; painted with bestquality epoxy

coatings in black and white bends. The details of symbol

foreach board shall be as per theinstruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg.including excavation,

curing etc.complete under the supervision of engineer in

charge. A warranty for 10 years for the Retro reflective

SBD SECTION-7 BILL OF QUANTITIES-282

sheeting from original manufacturer & a certified copy of

3 year outdoor exposure test report from third party test

lab for the product offered shall be submitted by

contractor. (A) Class-C Type-11 Retro Reflective

4 6.00 Village Name Sign :-Providing and fixing sign boards

Each made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size 90x60 cms.

rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality

epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.3mtr long stand post

of 75 x 75 x 6mm / 65NB Circular MS Pipe as required

and frame fabricated from suitable size iron angle of 35 x

35 x 3mm; painted with bestquality epoxy coatings in

black and white bends. The details of symbol or

inscription/letters / numerals for each board shall be as

per the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms.

for each leg.including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty

for 10 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

5 10.00 Facility Informatory Sign :-Providing and fixing sign

Each boards made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size 80 x 60 cms

rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality

epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.6mtr long stand post

of 75 x 75 x 6mm / 65NB Circular MS Pipe as required

and frame fabricated from suitable size iron angle of 35 x

35 x 3mm; painted with bestquality epoxy coatings in

black and white bends. The details of symbol foreach

board shall be as per theinstruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg.including excavation,

curing etc.complete under the supervision of engineer in

charge. A warranty for 10 years for the Retro reflective

sheeting from original manufacturer & a certified copy of

3 year outdoor exposure test report from third party test

lab for the product offered shall be submitted by

contractor. (A) Class-C Type-11 Retro Reflective

sheeting 5906.48 Each

SBD SECTION-7 BILL OF QUANTITIES-283

6 10.00 STOP Sign :-Providing and fixing sign boards made out

Each of 2mm aluminium sheet / 4mm ACP (Aluminum

composite Panel); size 90 cms Octagone as per design

of IRC-67-2012. Pre treated with phospheting process &

acid etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint ;reflectorised with

Micro Prismatic Grade retro refiectivesheeting of Type-

11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of 75 x

75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 35 x

x 3mm; painted with bestquality epoxy coatings in black

and white bends. The details of symbol foreach board

shall be as per theinstruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 10 years for the Retro reflective

sheeting from original manufacturer & a certified copy of

3 year outdoor exposure test report from third party test

lab for the product offered shall be submitted by

contractor. (A) Class-C Type-11 Retro Reflective

sheeting 7213.42 Each

7 10.00 Route Marker sign :-Providing and fixing sign boards

Each made out of 2.0 mm aluminium sheet / 4 mm ACP

(Aluminum composite Panel); size 60x45 cm rectangular

plus 30x25cm additional plate as per design of IRC-67-

2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint ;reflectorised with Micro

Prismatic Grade retro refiectivesheeting of Type-11 as

per ASTM D-4956 and latest M.O.S.T.Specifications;

mtr long stand post of 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from suitable

size iron angle of 35x 35 x 3mm; painted with bestquality

epoxy coatings in black and white bends. the details of

symbol or inscription / numerals for each board shall be

as per the instruction of engineer in charge.The fixing at

site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms.

for each leg.including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty

for 10 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

SBD SECTION-7 BILL OF QUANTITIES-284

8 2.00 Providing and fixing overhead high intensity grade retro

Each reflective Informatory / Destination Boards 6 (six) Nos.

made out of 2mm aluminium sheet; size 180x120 cms

rectangle as per the design of IRC-67-1977. Pre-treated

with Phospheting process and acid-etching coated with

one coat of epoxy primer and two coats of best quality

epoxy paint, reflectorised with retro reflective sheeting as

per latest MOST specifications. Letters and numerals

should be as per IRC-30-1968. The details of symbol of

inscription/ numerals for each board shall be as per the

instruction of engineer in charge. The boards shall be

mounted on high level over head type portal frame

(Gantry) made out of MS section of suitable size as per

detailed drawing/ design including cost of erection and

painting. 1027181.11 Each

9 12.00 Providing and fixing 5th Kilometer stone of precast C.C.

Each 1:2:4 including necessary reinforcement as per I.R.C.

type design in C.C. 1:4:8 including painting,lettering etc.

complete (For N.H., S.H. and M.D.R.)

10 12.00 Providing and fixing Hectometer as per I.R.C. type

Nos. design including painting, lettering etc. complete.(ii)

Fixing in C.C. 1:5:10

11 10.00 The Solar Powerd Traffic Blinker are Manufactured by

Nos. using superior quality raw material & are known for their

uniterupted operation and self generated power. The

whole assembly includes solar panel, frame for solar

panel, traffic signal blinker, wire harness, charge

controller, battery, battery box, signal pole etc. 15150.00 Nos.

Add : 2% Contingency Charges Rs.

Add : 1% Quality Controll Rs.

SBD SECTION-7 BILL OF QUANTITIES-285