REPAIRS TO FENCING AND BOUNDARY WALL IN CENTRAL SECTOR UNDER AGE B/R-I AREA AT MIL STN KOTA

Amount

Taking down cement plaster of any description and thickness on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and removal all rubbish material outside of MoD land complete all as specified and directed.

Demolition of brick work/stone boulder masonry, built in CM incl all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L providing cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L brick work with pulverized fuel Ash-lime bricks (Fly ash bricks - non modular size), straight or curved on plan exc 6 m mean radius, built in CM 1:6, complete all as specified and directed.

M&L walling of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6, including finishing the joint, flush as the work proceeds complete all as specified and directed.

M & L for walling of random rubble, except stone i.e. using old serviceable stone obtained from demolition under serial item No. 4.00 (here-in-before), uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6, including finishing the joint, flush as the work proceeds complete all as specified and directed.

Extra over lime or sand stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses, with maximum depression on face from straight edge held against the dressed surface not exceeding 40 mm; to block in course masonry, complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonry surfaces or other than fair faces of brick work in cement mortar 1:4, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for applying two coats of cement based paint on newly plastered surfaces of walls over and including a coat of chalk whitening & including preparation of surfaces, complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm dia, single socketed, in any length with rubber ring joints and laid in trenches/floor and including taking down old unserviceable existing pipe complete all as specified and directed.

M&L for preparing new steel surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer, complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out concrete, brick work, masonry, etc. embedded portion and making good disturbed ground complete all as specified & directed.

Dismantling fencing wire mesh, any type complete all as specified & directed.

Excavating in post holes (or similar holes) in any type of soil, each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm around foundation concrete as ordered, watering and removing surplus soil to a distance not exceeding 50 m and making good surface, complete all as specified and directed.

M & L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

S & F of framed work as in doors or gates of angles or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with including either hooks and hinges or steel hanging door fittings (excluding of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing, conforming to Fe-290 Grade-E-165, complete all as specified and directed.

S & F for mild steel work of angle iron or flat iron etc for hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts ; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only for mild steel round bars, 10 mm dia and over, cut to length, bent to shape and provided as support to chain link fencing complete all as specified and directed.

Supply only chain link MS galvanised fencing of any size /type complete all as specified and directed.

Fixing only chain link fencing, including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. & including provision of binding wire complete all as specified and directed. Note:- Supply only Chain link and line wire shall be measured and paid separately under respective item of this BOQ.

S & F of galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line of wire to be measured) & including dismantling of old wire fencing complete all as specified and directed.

S & F for mild steel screw bolts 11 to 15mm shank dia neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 5cm but not exceeding 10cm long and dia of neck exceeding 10mm but n.exc 15mm complete all as specified and directed.

S & F in renewal of aluminium HPL (High Pressure Laminate) sheets 6mm thick, weather resistant, glossy/matte finish, design wood type for main gate application & including all fittings and fixtures complete all as specified and directed.

S&F in renewal of stainless steel direction/sign boards supported on legs of 50mm stainless steel 304 grade pipe of hight 2.70m on one side and 2.10m other side of road with 1.2m x 1.8 m SS square pipe frame with 40mm x 40mm square pipe and and 3mm ACP sheets both side visibility covered with 12mm x 12mm SS square pipe, digital HP point as per art work reflective complete all as specified and directed.

Material & Labour in renewal of providing and fixing stainless steel (Grade 304) as in decorative type tubular pipe, chain and alphabet letter work/figure etc., as required made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts & including fixing with suitable arrangement complete all as specified and directed.

ANNAPURNA ENTERPRISES (BID ID -3130855)

Aditya Enterprises (BID ID -3130868)

M/S MOHINI ENTERPRISES (BID ID -3130642)

Ganesh Contruction (BID ID -3131484)

L P Singh and Co. (BID ID -3131478)

M/s Prem Associates (BID ID -3129221)

TARKESHWAR DASS CONSTRUCTION COMPANY (BID ID -3128916)