RATE CONTRACT FOR OIL BASED PAINTING ON KERBS, THERMOPLASTIC ROAD MARKINGS AND OTHER TRAFFIC REGULATION MAINTENANCE WORKS ON BOTH BANKS OF THE SABARMATI RIVER FOR THE SABARMATI RIVERFRONT PROJECT.

Bill of quantities (BOQ)

SABARMATI RIVER FRONT DEVELOPMENT CORPORATION LTD (SRFDCL )

BILL OF QUANTITIES

Rate Contract for oil based painting on Kerbs, Thermoplastic Road Markings and

Other Traffic Regulation Maintenance Works on Both Banks of the Sabarmati River for

the Sabarmati Riverfront Project.

Sr. Amount in Rs.

No. Without GST

1 Section : Traffic Works

Total Amount in Rs. (Without GST)

Total Amount in Rs. (Without GST)

I / We am / are willing to carry out work at _____________________ % above / below* percent

(should be written in figures and words) of the estimated cost, as mentioned above. Amount of my /

our tender works out for Rs. ________________ (in figures)

--------- (in words)

Note: * Please strike out above or below, whichever is not applicable.

1. No extra payment shall be paid for material testing, soil testing and any other tests as required.

2. The unidentified utilities shall be shifted or reconstructed as per prevailing S.O.R rates of

Ahmedabad Municipal Corporation/ R & B SOR.

Quantity Total amount

Quantity Total amount

Item Description Unit estimated (In Rs.)

but may be (Without GST)

Providing and laying hot applied thermoplastic road marking

compound of approved paints strictly of (Automark -

"Specsmark", Asian Paints - "Apcomark", Katalline-

"Traffix O" or Berger Paints -"Sigmark" make) on

bitumen/concrete road surface in one coat including cleaning

the surface of all dirt, dust seals, oil, grease and foreign

material, markings of 100 mm width and 2.5 mm thick road

marking strips with retro-reflective finish, incorporating reflect

rising glass beads @ 250 gms per sq.m. of marked area. The

1 thermoplastic material shall be heated using a pre-melter, and

the work shall include site demarcation, pre-marking, finishing,

and traffic control/management during execution, complete as

directed by the Engineer-in-Charge and in accordance with

applicable specifications.

The finished surface to be level, uniform and free from streaks

The marking should meet the performance criteria for night time

reflectivity, wet reflectivity and skid resistance as mentioned in

the section-15 of IRC 35-2015.

a White colour / Yellow Colour : Pavement Markings 20000 364.08

b Letters / Arrows : Directional Arrows / Word messages Nos 300 486.44

Supplying and fixing cat eye/Road Stud/RPM (Stimsonite)

made out from Acrilo beautile sterine injuction high compressed

2 molding with reflector made of MMC (prismatic type of size Nos 75 372

12cm x 6cm x2.5cm) provided with bituminous adhesive 100g.

with each unit for fixing. (High Intensity grade)

Providing and fixing signage film of reflectorized Micro

3 Prismatic Grade Sheet (Type-XI) of require size suitable for Smt 25 3390

fixing on existing Traffic Bollard

Providing and applying One coat of oil paint of approved make

strictly such as Nerolac, Dulux, Berger Paints, Asian Paints,

4 Nippon on existing curbs of the central verge and footpath, over Smt 32000 56

previously painted surfaces, including surface cleaning, and as

directed by the Engineer-in-Charge.

Providing and applying Two coat of oil paint of approved make

strictly such as Nerolac, Dulux, Berger Paints, Asian Paints,

5 Nippon on existing curbs of the central verge and footpath, over Smt 3500 78

previously painted surfaces, including surface cleaning and as

directed by the Engineer-in-Charge.

Providing and applying One coat of primer and Two coat of

oil paint of approved make strictly such as Nerolac, Dulux,

6 Berger Paints, Asian Paints, Nippon on new and existing Smt 1500 100

curbs of the central verge and footpath including surface

cleaning and preparation as directed by the Engineer-in-Charge.

Total Amount in Rs. (Without GST)

Total Amount in Rs. (Without GST)

*GST will be paid separately.