Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.0 LAccepted-AOC 10 2 PARAS SOCIETY PANCHVATI JAMNAGAR GUJARAT 361008 | JAMNAGAR | JAMNAGAR | GUJARAT | 361008 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹35.5 L+₹55,883.75 (1.60%)Rejected-Finance 101 VRAJ APARTMENT OPP POLICE HEAD QUARTER SARU SECTION ROAD JAMNAGAR 361008 | JAMNAGAR | JAMNAGAR | GUJARAT | 361008 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹36.4 L+₹1.4 L (4.04%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹36.8 L+₹1.8 L (5.20%)Rejected-Finance 103 HARIAKSH PLAZA HOSPITAL ROAD BHUJ KUTCH GUIARAT 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹37.7 L+₹2.7 L (7.72%)Rejected-Finance PLOT NO 626 627 GIDC BEHIND GANGOTRI DIARY PORBANDAR 360 577 | PORBANDAR | GUJARAT | 360577 | L5 | Rejected-Finance Being L5 |
Tender Value
₹35.5 L
EMD Value
₹71,000
Closing Date
14 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I CG PORBANDAR
Military Engineer Services, GE I CG Porbandar, DHQ No. 1, Opp. Birla Cement Factory, Porbandar-360575
PROVISION OF BASEKET BALL COURT AT ICGS PIPAVAV UNDER GE (I) CG PORBANDAR
2023_MES_618953_1
8911
Open Tender
Civil Works
Item Rate
180 days
PIPAVAV
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE I CG PORBANDAR
₹71,000
Yes
14 Nov 2023
15 Sept 2023
16 Oct 2023
15 Sept 2023
14 Oct 2023
30 Sept 2023
Amount
SCHEDULE 'A' B/R ITEMS
Surface dressing not exceeding 15cm deep in soft/loose soil, complete all as specified and directed by Engineer-in-Charge.
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and directed by Engineer-in-Charge.
Excavation in trenches not exceeding 1.5 Metre wide and not exceeding 1.5 Metre in depth for foundation etc. not exceed 10 Sqm on plan and not exceed 1.5 Metre in depth and getting out in soft/loose soil, complete all as specified and directed by Engineer-in-Charge.
Returning filling in, including spreading leveling, watering and well ramming in layer not exceed 25 cm in soft/loose soil, complete all as specified and directed by Engineer-in-Charge.
Removing excavated material exceed 250 Metre and not exceed 500 Metre depositing where directed at a level not exceed 1.5 Metre above the starting point, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for Hardcore of broken stones or boulders of gauge not exe 63mm, deposited spread, levelled in layers n exe 15cm thick watered and rammed to a true surface, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for plain cement concrete type D-2, 1:4:8 (40mm graded aggregate) as sub base, foundation, filling & mass concrete, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for 150mm thick Plain Cement concrete type C-2, 1:3:6 (using 40mm graded aggregate) as in sub base of floors, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for 100mm thick Plain Cement concrete type B-1, 1:2:4 (using 20 mm graded aggregate) as in flooring with alternate panel including necessary formwork, Finishing cement concrete surface even and smooth without using extra cement, adding with fibre reinforcement, complete all as specified and directed by Engineer-in-Charge. Note :- Fibre reinforcement shall be measured and paid seperatelly.
(a) Supply only polyester triangular fibres as secondary reinforcement in concrete shall be 6/12mm long with circum circle diameter of 30-35 microns, designed for melting point of 240-260 degree Celsius & having specific gravity 1.34 - 1.40. (b) Polyester triangular fibres, where indicated, shall be uniformally mixed at the rate of 0.25% (or at the rate as per manufacturer's instructions) by weight of cement. Mixing shall be deemed to be included in respective main item (like integral water proofing compound)
Material & Labour for Moorum/red bajri filling in floors or pavings, laid in layers not exceed 15 cm thick, spread, levelled and rammed including watering, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for laying machine pressed precast conctete interlocking reflective coloured pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade, including interstices filling with fine sand etc., complete all as specified and directed by Engineer-in-Charge.
Material & Labour for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for precast concrete block masonry with solid block exc 10 cm in width, type C-1, 1:3:6 (usiing 20 mm gaded stone aggregate) setting in cement mortar (1:6), complete all as specified and directed by Engineer-in-Charge.
Material & Labour for plain cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in coping, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for rendering 15mm thick in cement mortar 1:4 on concrete/ stone surfaces finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for preparation of new plastered surfaces of wall and applying two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as per the manufacturers instructions, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for Kota stone slab 20-25mm thick, in one piece, in riser of steps, above block masonary, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for forming Construction Joint 60 mm deep x 10mm wide filled with sealing compound Grade B, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for forming contraction dummy joints 30mm deep x 10mm wide filled with sealing compound grade B, complete all as specified and directed by Engineer-in-Charge.
Supply and fixing basket ball board including basket ball pole with connected items complete set consisting of mainly the following components :- (a) 20 mm thick fibre acrylic sheet / 'A' grade malesian board white including 50 x 50 x 2 mm thick with MS black square pipe frame with board of size 71" x 41" including standard marking on board. (b) 450 mm dia basket dunking iron ring with net made out of 18mm dia MS pipe fixed to board as per standard practice. (c) Top holding plate made out of 6 mm thick MS plate including 4 Nos 100 mm long 16 mm dia bolt and nuts. (d) Base plate made out of 6 mm thick MS plate including 4 Nos 16 mm dia, 650 mm long bolts and nuts. (e) Basket ball pole 150 mm dia and 2.5 mm thick round mild steel black pipe of standard height approx 3.20 Mtr verticle above floor level and 1.0 mtr deep below floor level fixed in PCC 1:2:4 and approx 2.2 Mtr projection /extensions to fix the board with adjoint pipe of square 50 x 50 and 2 mm thick as per standard practice as specified & directed by Engr-In-Charge. (f) All MS items duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge
Material & Labour for Providing, supplying and installation of 8 Layer acrylic synthetic flooring for basket ball court (3 to 4mm thick) over Plain cement concrete with following stages given below:- (i) JOINT : Special fibre treatment for concrete surface expension/ construction /dummy joints. (ii) PATCH:- 100% Acrylic based emulsion to repair cracks of concrete and asphalt pavement It should be carried out after 30 days from the date of placement of concrete. (iii) PRIMER – 100% Acrylic Unic Floor based emulsion to improve bond of acrylic court system to the concrete or asphalt surface. (iv) RESURFACER:- 02 layer of Acrylic Resurfacer 367 - 30 for filling and smoothing asphalt or concrete surfaces in preparation for Acrylic ITF Approved tennis court system. And fills the surface chips, voids and conceals repairs while providing a smooth surface for colour coating. (v) RUBBER CUSHION COAT:- 02 layer of Acrylic Floor rubber cushion for asphalt or concrete surfaces in preparation for Acrylic ITF approved system. (vi) ULTRA RUBBER CUSHION COAT:- 02 Layers of Acrylic Floor rubber cushion for asphalt or concrete surfaces in preparation for Acrylic ITF approved system. (vii) PRECOAT:- 2 layers of Acrylic based textured tennis top coat. Ideal for colour coating tennis and basketball courts and other sport pavement surfaces. (viii) LINES :- 2 layers of acrylic latex white striping paint textured based ITF approved complete all as specified and directed by Engineer-in-Charge. [Note:- The work shall be executed through specialised agency / applicator of synthetic flooring and material shall be approved ITF standards of Make carbolink india Pvt Ltd or equivalent and colour of synthetic flooring shall be approved by GE / Engr-In-Charge. The unit rate quoted by the contractor/bidder shall be deemed to be included guarantee peiod of three years from the date of completion. The security deposit amount shall be calculated as per the scale laid down by MES for calculated individual security deposit on the toal amount of said item.
SCHEDULE 'A' ELECTRICAL ITEMS
Supply and fixing LED Dot 45 Watts (5700K), IP 66, high performance LED streetlight, with aesthetic aluminium powder coated housing and precise street optic lens and IK10 impact resistance, nuts & bolts etc., complete all as specified and directed by Engineer-in-Charge. Make : Wirpo cat No. LR08-611-XXX-57-XX or its equivalent in Philips/Bajaj
Supply and laying of XLPE insulated and PVC armoured heavy duty 1100 volt grade electric LT UG cable with aluminium conductor of size 16 Sqmm 4 Core laid in trenches/along the wall/pole including making good the disturbed surfaces of walls/floor etc. all connections complete as required at site and complete all as specified and directed by Engineer-in-Charge.
Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed by Engr-in-Charge.
Supply and Fixing of GI steel tubing light grade 32 mm dia for laying in ground and road crossing along the pole in coping etc. for cable protection including necessary fittings, clamps for supports, etc., including making good the disturbed surfaces of walls/floor etc., complete all as specified and directed by Engineer-in-Charge. Make - Tata/Jindal/Surya Prakash
Supply and laying 50 /38 mm Double Walled Corrugated (DWC) Pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS14930 (Part-II) for protection of UG cables, laid in trenches / road / drain or fixed along wall, poles or laid under floor, complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing MCCB Metal enclosures, MCCB FP 63 Amps 415 Volts 16 KA fixing in Metal enclosure, in wall mounted type concealed/ Surface mounted and making good the disturbed surfaces of walls / ceiling / floor etc. complete with all accessories, main switch and connecting the cables with proper, complete all as specified and directed by Engineer-in-Charge. Make:-Cat Part No. - 5078 01 & 4200 13 of Legrand or Equivalent from ABB/Havells/Schneider
Supply and Fixing automatic street light switch NATURE SWITCH for automatic switching of streets lights based on lux level of natural light. The sensor (nature switch) along with suitable power contactor, MCB and support terminals should be enclosed in pole /wall mountable enclosure made out of rust proof, electric shock proof, termite proof and FR grade special moulding compound conforming to IP-54. The contactor, MCB and circuit wiring 16 sqmm copper shall be suitable, complete all as specified and directed by Engineer-in-Charge. Make :- Model No. SWADEEP-02EC-5kW3P (3 PHASE) of Healer or equivalent to Havells /L&T
Material and labour for Multi standard Copper Conductor cable of 1.5 Sq mm 3 Core size, drawn through inside of pole, for interconnection of cable light/looping box to light etc., complete all as specified and directed by Engineer-in-Charge. Make :- Polycab/Plaza/Havells
Supply and fixing Octagonal hot dip galvanised iron pole, 6 Metre long with base plate, 300 mm long weather proof reinforced door opening with junction box mounting arrangement, inbuilt junction box, 'J' shape, EN8 foundation bolt with nuts template including RCC foundation as per manuacturer's design conforming to IS 1786 and hot dip galvanised bracket Single arm for fixing of street light and one no. of MCB 6 Amp including terminal block. The foundation shall extend above surrounding levels by 200mm, complete all as specified and directed by Engineer-in-Charge. Make :Wipro/Surya/ Bajaj /Utkarsh NOTE :The contractor should submit manufacturer's foundation drawing before commencement of foundation work. Excavation/earthwork, removal and returning filling included in the quoted rate.
Supply and fixing Octagonal hot dip galvanised iron pole, 6 Metre long with base plate, 300 mm long weather proof reinforced door opening with junction box mounting arrangement, inbuilt junction box, 'J' shape, EN8 foundation bolt with nuts template including RCC foundation as per manuacturer's design conforming to IS 1786 and hot dip galvanised bracket without arm for fixing of street light and one no. of MCB 6 Amp including terminal block. The foundation shall extend above surrounding levels by 200mm, complete all as specified and directed by Engineer-in-Charge. Make :Wipro/Surya/ Bajaj /Utkarsh NOTE :The contractor should submit manufacturer's foundation drawing before commencement of foundation work. Excavation/earthwork, removal and returning filling included in the quoted rate.
Supply and Fixing LED Flood light 100 Watts (5700K), IP 66, high performance LED with aesthetic aluminium powder coated housing and precise street optic lens, nuts & bolts etc., complete all as specified and directed by Engineer-in-Charge. Make : Wirpo cat No. LF20-122-060-57-G3 or its equivalent in Philips/Bajaj
M/s SK Traders
Nitesh Enterprise
Vijay Construction Co
K K Construction Co
JAMNAGAR ELECTRIC AND MACHINERY CO
roxy enterprise
JAY BHARAT METAL SUPPLIERS
stage.html
html • 0.06 MB
technical_692992.pdf
PDF • 0.20 MB
techsummary_692992.pdf
PDF • 4.03 MB
finance_692992.pdf
PDF • 0.36 MB
BOQ Comparative Chart
xlsx • 0.02 MB
finsummary_692992.pdf
PDF • 0.39 MB
8911AOC.pdf
PDF • 0.31 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .