Provision of shed for storage of Tools and dies in Foundry Section inside Factory area at OFMK

Amount

SURFACE EXCAVATION : Surface excavation in hard/dense soil n.exc (not exceeding ) 30 cm deep and averaging 15CM deep and getting out inclulding all as specified and directed.

EXCAVATION: Excavation in trenches in hard/dense soil not exceeding 1.5m width and 1.5m depth and getting out including all as specified and direcated.

EXCAVATION: Excavation in over areas in hard/dense soil not exceeding 1.5m depth and getting out nclulding all as specified and directed.

FELLING OF TREE: Felling of tree exc.30 cm and not exc.100 cm girth including cutting of trunk and branches and stacking of serviceable material and disposal of unserviceable material to a distance n exc. 50m and clearing site

GRUBBING UP TREE TRUNK : Grubbing up tree trunk of girth exceeding 100 cm and not exceeding 150 cm, including cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, stacking of serviceable materials and removing of unserviceable materials to a distance n. exc. 50 m and clearing site.

REMOVING OF EXCAVATED MATERIAL Removal of excavated material to a distance exceeding 500M but not exceding 1KM and deposting where directed, complete all specified and directed.

MOORUM : Supply and filling of Moorum/Red Bajri, filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed..

REINFORCEMENT : Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips .

FORMWORK : Formwork with rough finished surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams,slabs sides and soffits of foundations and plinth beams; and similar work; vertical or to batter.

BRICKWORK - Brickwork with sub class B bricks in 1:4 cement mortar, straight or curved in plan exc. 6 m mean radius, built in all as specified and directed.

PCC FLOORING : Cement concrete of 100 mm thickness in floors, sub-floors, sub-bases, pavings etc. of type D-2, 1:4:8 (40 mm graded aggregate)

PCC FLOORING : Cement concrete of 100 mm thickness in floors, sub-floors, sub-bases, pavings etc. of type B1, 1:2:4 (20 mm graded aggregate)

WEARPROOF TOPPING : Wearproof topping as specified of 20mm thickness with ratio 1:1:2 (incorporating and approved metallic floor hardner) laid on conrete floors and pavings, and finished even and smooth ( except metallic hardner ) etc., and finished to an even and fair surface including all as specified and directed by EIC.

HARDENER : Only Supply of Metallic Floor Hardener for wearproof topping, metallic floor hardner and cement are mixed in dry state, including all as specified and directed by EIC.

DIVIDING STRIPS : Supply and Fixing of Glass dividing strips of 3mm thick and not exceed 22mm width, fixing in concrete flooring to match the top surface includign all as specified and directed by EIC.

RCC : Reinforced Cement Concrete for footings, plinth beams,bases for columns etc. of type B1, 1:2:4 mix by using 20 mm graded aggregates, complete all as directed and specified.

RCC :M&L - Reinforced Cement Concrete , Type B1, 1:2:4 Mix by using 20mm graded aggregate in coloums, beams,lintels,chajjas,cantilevers, etc. over 1.5 m span.complete all as specified and directed

PCC : M&L - Plain Cement concrete 1:2:4 , type B2 with 40 mm graded aggregate, in foundation, filling and mass concrete, complete all as specified and directed.

PCC : M&L - Plain Cement concrete (1:4:8), type D2 with 40 mm graded aggregate, in foundation, filling and mass concrete .

STONE MASONRY : Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6.

PLASTERING :Rendering 12 mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces including provision of border and creation of raised portions etc. complete all as specified

PLASTERING : Setting Coat of 5mm thick, trowelled to even and smooth finish with ratio 1:2 on plastering serfaces including all as specified and direced by EIC.

RCC : Providing precast Cement Concrete solid building blocks of grade B1, 1:2:4 mix or slabs 10cm thick setting in CM (1:4)complete , all as directed and specified

STRUCTURAL STEEL WORK: Structural steel work for making roof trusses, stancstions, purlins, girders etc with suitable Pipes, Square Tubes etc. of Gr. Fe-410-W-(Gde-E-250) quality "B" including cutting, welding complte with suitable guset plates, bolts, nuts etc with errection complete all as specified and directed.

ROOF SHEETS: Pre-Painted galvolume aluminum zinc coating GI based Corrugated steel sheet 0.5 mm thick of sny colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall fixed with self tapping screws complete all as specified.

ROOF SHEETS: Pre-Painted galvolume aluminum zinc coating GI based Plain steel sheet 0.5 mm thick of sny colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall fixed with self tapping screws complete all as specified.

CEMENT PAINTING : Cement Painting to walls/ceilings with White or Tinted of two coats before that One Coat of Primer to be applied on new surfaces, including preparation of surface, all as specified and directed.

ENAMEL PAINTING: Rendering synthetic enamel painting on Steel surfaces over one coat of zinc chrome red oxide - surfaces of any description over 10 cm width or girth including preparation - TWO coats Make: Asian

DISTEMPERING : M & L Oil Bond Distemper in walls with White or Tinted of two coats includig one coat primer with alkali resistant priming paint, to be applied including preparation of surface, all as specified and directed, brand Snocem.

ROLLING SHUTTER : Supply & fixing of steel rolling shutters, thickness of laths 1.25 mm, with ball bearing, as specified including top cover, anchoring rod, hasp and staple gear operated Type with bevel gear box crank handle and one shop coat of primer; erected in position as indicated, complete all as specified and directed.

LOCKS : Supply and Fixing of Safety Lever Locks mild steel with 4 levers for rolling shutters and supply of Ball bearing for rolling shutters, including all as specified and directed by EIC.

STEEL WINDOWS : Supply and Fixing of Steel Windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, including al as specified and directed by EIC.

FIGURED GLASS : Figured glass 4mm thick, pin head type and glazing with oil putty in squares n exc. 0.5 sqm. In each plane.

SCREW BOLTS AND NUTS : Supply & Fixing of M24 Mild steel bolts, purpose made with hexagonal or square head one end and screwed both ends: each screwed and to be fitted with washers and one hexagonal or square not , exc 30cm long exc. 12mm dia and not exceeding 20mm dia including all as specified and directed.

POINT WIRING: Supply and fixing /Drawing of cables in PVC pipe of 1"or 3/4 " Dia ,one Light point or one fan point controlled by one switch with cables 1.5 sq.mm size of copper conductor cables FR PVC Make Finolex/Havells in PVC conduit concealed (chases cutting extra) ,includes all accessories like bends ,tees ,screws ,clips ,plugs,clamps,junction boxes ,cutting holes in or through walls ,fixing of wooden boards ,earth wire and nuetral etc and testing as specified all connections to be given by copper Pin/ eye type lugs including for earth connections complete all as specified by EIC.

POINT WIRING : Supply and fixing /Drawing of cables in PVC pipe of 1"or 3/4 " Dia ,one 3 pin socket outlet 15 amps independent, with 4.0 sq.mm size of copper conductor cables FR PVC in PVC conduit concealed ,includes all accessories like bends ,tees ,screws ,clips ,plugs,clamps,junction boxes ,cutting holes in or through walls ,fixing of wooden boards ,earth wire. All connections to be given by copper Pin/ eye type lugs including for earth connections etc, and testing as specified by EIC 's technical instructions amended from time to time.

CEILING ROSE : Suply and fixing of ceiling Rose,PVC/Polycorbonate,3 terminal Make Anchor / Havells/Maru of ISI quality.

MCB :Supply and fixing of MCB single pole 5 to 40 amp Make Schneider/legrand of ISI quality.All connections to be given by copper Pin/ eye type lugs including for earth connections

MCB D.B :supply and fixing of MCB D.B single door of SPN 8 way with 200Amps rated bus bar phase distribution type including Grouting into the wall neatly and terminate all cables neatly with cable glands and lugs Make legrand/Schneider complete all as specified by EIC.

MCCB:Supply and fixing of MCCB 4 pole ,100 Amps with fixed thermal magnetic release up to breaking capacity 16KA frame N2,415 volts complete all as specified by EIC.Make:scheinder / Legrand/Havells/ C&S.

SWITCH :supply and fixing of switch piano flush type single pole one way 6 amps MakeAnchor / Havells ISI quality

SWITCH CUM SOCKET :supply and fixing of switch and socket combination 2 in 1 , 3/5 pin 16 AMPS FLUSH type Make Anchor / Havells of ISI quality.

FAN REGULATOR: Material and labour step[ type electronic fan regulator flush type on the existing phenoliclaminated sheet stc as required. Make Anchor / Havells

CEILING FAN : Labour only for ceiling fan (M.D. Supply) and connecting up including provision of canble from ceiling rose ot connector fan.

EARTHING: Earthng complete with Galvanised steel earth plate electorode 60x60 cm x 6.3 mm thick, buries directlyin ground ( Earth pit not less than 2.25 meters deep below ground level ) with top edge of the plate not less than 1.5 meters below ground level, connected to Galvanised iron or steel strip 25x 4 mm as earthing lead by means of bolts , nuts, check nuts and washers of GI or steel all as shown in Electrcal plate no. 3 connected to earth test point all as specified or indicated including testing on complettion.

EARTH CONTINUITY CONDUCTOR : Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buries in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc, as required 25x 4mm GI strip

GI PIPE : Supply and Fixing of GI pipe to protect earthing strip 40mm dia medium grade for earthing complete all as specified and directed

PRECAST CEMENT CONCRETE : M & L of precast cement concrete B1 1:2:4 (20mm graded aggregate ) in covers slabs for earth pits with plain faces size (40x40x5cm) complete all as specied and directed.

INDUSTRIAL SOCKETS : Supply and Fixing of single pole and nuetral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB industrial sockets for A/Cs 3 pin 220 V Make Legrand/Schneider and all connections to be given by copper Pin/ eye type lugs including for earth connections

SUB MAIN WIRING : Supply and fixing of wiring for Sub Main wiring along with earth wire with following sizes of FR PVC Insulated copper conductor single core cable 2x6 Sq.mm + 1x6 sq.mm earth wire in PVC Conduit wiring Make Finolex/Havells complete all as specified by the EIC

HIGH BAY LIGHT : Supply & Fixing of LED High Bay Light with adjustable aluminium mounting (Whatage 100 Watts, rated voltage 230 Volts AC make Philips/Wipro/Bajaj/Crompton

MCCB ENCLOSURE : Supply & Fixing of MCCB Enclosure Box for 4 pole MCCB 125 A make L&T / HPL/ INDO ASAIN complete all as specified and directed by EIC.

CEILING FAN : Supply for ceiling fan 1200 mm sweep single phase make CG/Orient/Usha

gurudev infra projects limited