Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.4 LAccepted-AOC | L1 | Accepted-AOC Accepted Vide Resolution No.9(2) dtd.16/09/2025 of MOONNILAVU GP | |
| 2 | L2₹3.8 L+₹40,158.12 (11.8%)Rejected-AOC MUKALEL HOUSE KUMILY | IDUKKI | KERALA | 685501 | L2 | Rejected-AOC Higher rate and hence not admitted | |
| 3 | L3₹3.8 L+₹40,803.12 (12.0%)Rejected-Finance | L3 | Rejected-Finance Higher rate and hence not admitted |
| Sl No | Description | Qty | Unit | Jomy Mathew L2 | Prince Mathew L1 | stjudepoonjar L3 |
|---|---|---|---|---|---|---|
| 1.00MAINTENANCE WORK | ||||||
| 1.00 | 50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete | 7.74 | cum | 7,691 ₹59,528.34 | 6,876.16 ₹53,221.48 Lowest | 7,691 ₹59,528.34 |
| 1.00 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 90 | kg | 544 ₹48,960 | 486.51 ₹43,785.9 Lowest | 544 ₹48,960 |
| 1.00 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 53.04 | sqm | 1,278 ₹67,785.12 | 1,143.27 ₹60,639.04 Lowest | 1,278 ₹67,785.12 |
| 1.00 | 11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete | 122.78 | sqm | 1,173 ₹1,44,024.46 | 1,048.93 ₹1,28,790.77 Lowest | 1,173 ₹1,44,024.46 |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 107.5 | sqm | 369 ₹39,667.5 | 330.57 ₹35,536.28 Lowest | 375 ₹40,312.5 |
| 1.01 | 13.47.1:Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) | 103.2 | sqm | 203 ₹20,949.6 | 182.01 ₹18,783.43 Lowest | 203 ₹20,949.6 |
Tender Value
₹3.8 L
EMD Value
₹9,529
Closing Date
25 Sept 2025, 4:00 pmClosed
Assistant Engineer
Office of the Assistant Engineer LID EW Section MOONNILAVU
Project No 74/26-Maintenance of Veterinary Hospital and Krishibhavan
2025_LSGD_798323_1
04/2025/AE/LSGD/MNLV/2025-26/4
Open Tender
Civil Works - Buildings
Item Rate
Moonnilavu GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹840
Yes
₹9,529
Yes
8 Dec 2025
17 Sept 2025
26 Sept 2025
17 Sept 2025
25 Sept 2025
17 Sept 2025
Amount
MAINTENANCE WORK
50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete
21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.47.1:Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
Jomy Mathew (BID ID -2357261)
stjudepoonjar (BID ID -2357373)
Bidder Name
stjudepoonjar
Jomy Mathew
Prince Mathew
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1323027.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .