Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.3 LRejected-Finance | ₹18.3 L | L1 | Rejected-Finance Negotiation not done by the contractor |
| 2 | Rejected-Technical | - | - | Rejected-Technical L2 |
| 3 | Not Admitted-Fee/PreQual/Technical/Finance | - | - | Not Admitted-Fee/PreQual/Technical/Finance Not qualified for AOC |
| Sl No | Description | Qty | Unit | Khadilkar R L2 | A G ANTONY L1 |
|---|---|---|---|---|---|
| 1.00construction of MCF | |||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 4.1 | cum | 359.72 ₹1,476.29 Lowest | 359.72 ₹1,476.29 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 4.1 | cum | 9,235.97 ₹37,904.42 Lowest | 9,235.97 ₹37,904.42 Lowest |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,401.49 | kg | 230.93 ₹3,23,645.62 Lowest | 230.93 ₹3,23,645.62 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 5,662.21 | kg | 187.05 ₹10,59,116.75 Lowest | 187.05 ₹10,59,116.75 Lowest |
| 1.00 | OD316764/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness
with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have
protective guard film of 25 microns minimum to avoid scratchesduring transportation and
should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet
shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal,
complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting tosize and shape wherever required. | 419.71 | sqm | 621.1 ₹2,60,681.88 Lowest | 621.1 ₹2,60,681.88 Lowest |
| 1.01 | 16.15.2:Supplying at site:Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & painting to be paid for separately) | 903.45 | kg | 93.5 ₹84,472.67 | 93 ₹84,020.94 Lowest |
| 1.01 | OD316763/2024-2025:supplying and providing vinyl sticker name board | 38 | 1 sqm | 320 ₹12,160 | 317 ₹12,046 Lowest |
| 1.01 | 13.71:Lettering with black Japan pint of approved brand and manufacture | 7,980 | per Letter per cm height | 6.3 ₹50,274 Lowest | 6.3 ₹50,274 Lowest |
Tender Value
₹18.3 L
EMD Value
₹45,745
Closing Date
7 Feb 2026, 6:00 pmClosed
Assistant Engineer
Assistant Engineer, LID EW Section, Cherthala South
Annual Plan-2024-25 PROJECT NO 339/25-CHERTHALA SOUTH GP CONSTRUCTION OF MINI MCF ALL WARDS
2026_LSGD_832040_9
6/AE/LID EW/CSGP/25-26
Open Tender
Civil Works - Roads
Item Rate
180 days
Cherthala South GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
Yes
₹45,745
Yes
17 Sept 2026
31 Jan 2026
9 Feb 2026
31 Jan 2026
7 Feb 2026
31 Jan 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1construction of MCF | |||||
| 1.001 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 4.1 | cum | - | - |
| 1.002 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 4.1 | cum | - | - |
| 1.003 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,401.49 | kg | - | - |
| 1.004 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 5,662.21 | kg | - | - |
| 1.005 | OD316764/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness
with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have
protective guard film of 25 microns minimum to avoid scratchesduring transportation and
should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet
shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal,
complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting tosize and shape wherever required. | 419.71 | sqm | - | - |
| 1.006 | 16.15.2:Supplying at site:Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & painting to be paid for separately) | 903.45 | kg | - | - |
| 1.007 | OD316763/2024-2025:supplying and providing vinyl sticker name board | 38 | 1 sqm | - | - |
| 1.008 | 13.71:Lettering with black Japan pint of approved brand and manufacture | 7,980 | per Letter per cm height | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_1398891.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.30 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.25 MB
Affidavit.pdf
Tender Documents • 0.23 MB
FormofTender.pdf
Tender Documents • 0.25 MB
Preliminary.pdf
Tender Documents • 0.25 MB
viewnit.pdf
Tender Documents • 0.02 MB
viewsbd.pdf
Tender Documents • 2.02 MB
BOQ_1398891.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .