Civil works in connection with renovation of suite rooms - Lilly and Lotus, in FACT Udyogamandal house.

Amount

Dismantling of walls of any thickness made out of brick, laterite or rubble in cement mortar including stacking of serviceable materials for reuse at places pointed out and disposal of debris to the low lying areas in Township within a lead of 150M as directed.

Dismantling and removing carefully doors with or without ventilators, including removal of shutters, hinges, hold fasts and all other fittings and stacking materials in Township Office as directed.

Dismantling and removing carefully windows with or without ventilators including removal of shutters, hinges, hold fasts and all other fittings and stacking materials in Township Office as directed.

Demolishing CC or RCC work including clearing away the debris at places pointed out in Township within a lead of 150M and reclaiming the reinforcement steel and stacking the same at places as per instructions.

Demolishing and removing carefully old cement plaster to the required area of the existing cement plaster of wall, floor,etc.and cleaning the surface and disposal of the debris at places pointed out within a distance of 150M as directed.

Transporting excess spoil earth, gravel, sand, broken stones, split stones, laterite stones, blasted rubble upto 45 DM3 size etc. by lorry to places pointed out upto a maximum distance of 5KM including loading with a lead of 50m and lift upto 1.5m at each loading point etc. complete.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm

Providing, fabricating & erecting temporary supports to the structural members like beams, slabs etc. to relieve the load on the members during breaking of damaged concrete, removal guiniting, excavation or any dismantling work as per the instruction of engineer incharge/consultant. These supports shall be provided either in the form of props or trestles fabricated using structural steel(with horizontal and inclined mebers as bracing) as per the requirement or by load bearing jackey and as per the instruction of EIC/Consultant. Item rate is inclusive of the materials, all labour, supervision, tools and tackles and transportation & taking away scrap etc., complete as per specification and as directed by EIC (Payment will be made for area of beam/ slab supported by the system)

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Solid concrete block masonry in cement mortar 1:5 using good quality cement concrete blocks approved by the Engineer in charge for superstructure in ground floor/upto 5m height from plinth level/floor level.

Plastering with cement mortar 1:4, 12mm thick, one coat floated hard and trowelled smooth at all levels.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one priming coats with primer of approved brand and manufacture,With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Wall painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour:-One coat.

Providing and laying Vitrified tiles of size 800 x 800 mm or higher in floor (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.

Providing and fixing wallpaper made of a paper base with a polyvinyl chloride (PVC) in finishes such as matt, semi-gloss, or high-gloss. The wallpaper shall be durable, with high resistance to scratches, tearing, and abrasion. It is scrubbable, washable, and moisture-resistant. The material should have good light fastness to prevent fading and must meet applicable fire safety standards and installation shall be as per the manufacturer's recommendations. . The wallpaper should comply with ISO 9001 standards for quality management . Payment is based on the area covered, measured in square meters. The scope of work also includes labour for installation, tools and any fittings required for installation.

Providing and fixing false ceiling at all height including providing and fixing of frame work all as per detailed specification noted in Special Conditions of work Clause No. 5 and as per the direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge moisture resistant gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)

Supplying and fixing pure polyester powder coated coloured aluminium frame work of extruded sections and approved brand/manufacturer including mitring the joints, fixing the frame work with necessary screws, drilling holes in floors, walls and ceiling, providing plugs for fixing screws, finishing the sides of packing between frame work and wall/ceiling with plaster of paris, cost of timber packing if necessary, rubber lining for air tightness, providing corner cleats, etc. complete as per standard practice for glazed doors, windows, side hung as well as sliding windows, ventilators, partitions etc. including all hinges, pivots, tower bolts, peg stays, fixtures, and pure polyester powder coated aluminium approved brand beadings, handles & approved locking system at all levels.(Payment will be given for the weight of aluminium sections only)

Glazing the Aluminium frame work of windows with 3 mm or nearest thick plain glass panes and anodized Aluminium approved brand beadings, with EPDM / NEOPRINE weather seals, gaskets of EPDM or PVC etc and screws as per standard practice at all levels (Measurement for overall area of doors / windows / ventilators)

Steel work welded in built up sections/ framed work, including cutting, hoisting,making holes for fixing, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In ventilator,gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Supplying and fixing stainless steel (SS.316) mosquito proof net to suit the existing door/Window/Ventilator frames using powder coated Aluminium frame of suitable size including handle , locking arrangements etc.complete.

Supplying and fixing Picture Display Panel/ frame for displaying photographs of FACT made with BWP grade plywood with 1mm laminate (Merino, Green or equivalent approved brand) and shall be finished with boarder as per the direction of Engineer-In-Charge.(size 600 x 900 mm Aprox)

T K SALIM (BID ID -3216646)