Supply and Installation of fire hydrant and sprinkler system.

SECTION - 1.0 FIRE PUMPS, EQUIPMENT, PIPING, VALVES & ACCESSORIES

Fire Pumps (Electric, and Jockey) Pump Location - Plant Room

Supplying,Installing, testing and commissioning of Fire authority approved fire pumps suitable for automatic/ manual operation consisting of the following-Rates for erection of pumps only. With Factory Fabricated Base frame and foundation Anchor Bolts, Interconnection Cable from Panel to Pump.

Fire pump panel (Combined for All Pumps) and electrical works - Starter panel with with necessary protection and on off indicating lamps Ammeter / Voltmeter and KWh meter. Cabling / earthing from panel to pump. Cable- Al XLPE .

Providing of dial type Pressure Guage having 100 mm dial & range of 0-15 Kg/cm2 with syphon and cock. Make: HGURU/FIBIG/Micro/Airmax/SWI and Pressure Switches Danfoss Make (0-16Bar)

Providing of CI Butterfly valve (PN 16) with integrally moulded linear of nitrile or EPDM. Stainless steel Disc & Steam Lever operated with ISI Marked as required.r (Billing At Actual)

65 mm dia.

80 mm dia.

100 mm dia.

Providing, fixing, testing and commissioning of non-return valve of following sizes complete with rubber gasket, GI bolts, nuts, washers etc. as required.

Providing, of above ground GI Class-B pipes (At Actual) (APPOLO, SURYA , ASIAN)

80 mm dia.

65 mm dia.

40 mm dia

25mm dia

Providing, of Weather proof standard Single Door fire hose cabinet ) made out of 22 SWG powder coated M.S. sheet (Make: Protecto Fire Safety Industries).

Providing, of SS single headed ISI marked oblique pattern hydrant landing valves as per IS:5290 with 80mm dia flanged inlet and 63mm dia female outlet complete with SS metal cap & chain etc. (Make: Protecto Fire Safety Industries)

Providing, of 15 mtr long 63 mm dia RRL hose pipe with 63 mm dia. Male and female SS couplings duly binded with GI wire, rivets etc. conforming to IS 636 (type-A) as required. (Make: Protecto Fire Safety Industries)

Providing, of Standard SS branch pipe with nozzle of 20 mm nominal bore outlet as per IS:903 suitable to fit with standard instanteneous type 63 mm dia coupling.(Make: Protecto Fire Safety Industries)

Supplying of First Aid hose reel with MS construction spray painted in post office red, conforming to IS 884 with upto date amendments, complete with the following as required. 36m long 25mm (nominal internal) dia water hose thermoplastic ,25mm (nominal internal) dia S.S. Ball valve & nozzle. Connections from riser with stop valve (GM) & M.S. pipe. (Make: Protecto Fire Safety Industries)

Supplying, of 2 way fire brigade tank inlet connection of cast iron body with 2 nos. gun metal instanteneous inlet couplings complete with cap and chain as required for 100 mm dia MS pipe connection, conforming to IS 904 as required. (Make: Protecto Fire Safety Industries)

Providing and fixing of 15 mm dia quartzoid bulb type brass sprinkler head suitable for sustaining pressure on seat & water hammer effect. The type and temperature rating shall be as follows: (With Acessories)(Make: Protecto Fire Safety Industries)

Providing Signages in Block / Small Letters of Specified Sizes:

Providing monoamonium phosphate base stored pressure type Dry Chemical Powder Extinguisher of capacity 6 kg. as per IS 15683 with hanging bracket & accessories. (Make: Protecto Fire Safety Industries/Kanex)

Providing of Carbon Dioxide type Fire Extinguisher of capacity 4.5 kg. as per IS 15683 with squeze grip type operation with swivel horn, hanging bracket & accessories. (Make: Protecto Fire Safety Industries/Kanex)

Providing and fixing of fire alarm and pump trigger system as per requirement and specification consisting of following items

Providing and fixing of control panel 4 zone for fire alarm & pump trigger system complete as per the requirement of the system.(Make:Ravel/System Sensor/ Dahua)

Conventional Optical Smoke Detectors (Ravel / System Sensor/ Apollo/ Dahua)

Erection and commissioning of Entire Fire protection system alongwith Miscellaneous M.S. structural work fabricated from standard sections, (MS rounds, angles, channels etc.) including cutting to size, drilling, welding, including cost of fasteners, clamps in RCC structural members as directed, including two or more coats of synthetic paint over one coat of primer after surface preparation including cutting and making good walls (Structural other than pipe supoort). ( This includes miscellaneous metal harware such as nuts, bolts, flanges, anchors clamps etc).

Liasioning for getting Approval of Fire Hydrant system from local fire authority and any other relevant statutory authority at initial and various other stages of work. Client will furnish required Data / Drawings and other paper work related documents as may be required for getting the required approval. (*any statutory charges to be paid extra).

Total Amount :-

President and

Manager- The kodinar Taluka co operative banking union ltd.