Construction work of Office Building in New R.S.No.90/2 at Sub yard Dhunsol Ta.Lakhani Dist : Vav-Tharad.

1 Excavation for foundation upto1.5

depth including.sorting out and

stacking useful material and disposing

of the excavated stuff upto 50mt lead.

(a) Loose or soft soil

Item code 04001A 167.39 121.72 Rs/cmt

2 Excavation for foundation for depth from

1.50 m to 3.00m including sorting

out and stacking of useful

materials and disposing off the

excavated stuff upto 50 meter

lead.(A) Loose or Soft soil.

(S.O.R.P.no. 67 Item code 04002A 135.00 134.95 Rs/cmt

3 Filling available excavated earth

(excluding rock) in trenches plinth

sides of foundations etc. in layers

are not exceeding 20 cm in depth

consolidating each deposited layer

by ramming watering etc comp.

S.O.R.P.No.69, It code 4006 213.82 135.56 Rs/cmt

4 Filling in foundation & plinth with murrum

or selected soil in layers of 20 cm. thickness

including watering ramming and consoli-

dating etc comp.

S.O.R.P.No.69, It code 04008A 89.75 279.28 Rs/cmt

5 Filling in plinth with sand under floors

including watering ramming, consoli-

dating and dressing etc comp.

S.O.R.P.No.69 It code 04007A 37.40 440.35 Rs/cmt

6 Providing and laying Cement concrete

1:4:8 (1 cement :4 coarse sand:8

machine cut stone aggregate 40mm

nominal size) and curring comp.

excluding cost of formwork in.

(a) Foundation & plinth.

S.O.R.P.No.73 It code 05004A 54.84 2627.15 Rs/cmt

7 Applying general insecticide pest control

treatment to floors, cupboards etc

including labour materials etc.complete.

Using Imidacloprid 30.5 SCas Per

IS 6313 part-II( (0.075% concentration

by mass) is recommended 10.5ml

chemical diluted with 5 liters of water

application 0.5 litre chemical /Sqm of

surface is recommended as per I.S.

S.O.R.P.No.158, It code 22006 149.59 80.04 Rs/smt

8 Providing and laying Controlled cement

concrete M-200 and curing comp

excluding the cost of form work and

reinforcement for reinforced concrete

S.O.R.P.No.77, It code 05024AA

(a) Foundation footings Base of columns 32.38 3904.28 Rs/cmt

9 Providing and laying controlled cement

concrete M 200 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

work in © Slabs,landing, shelves,

balconies, lintels,Beams, Girders,copping

and cantilever upto floor two level.

(S.O.R P. no.77 . Item No.5.8.2

Item code 05024CA 96.14 4424.47 Rs/cmt

10 Providing and laying controlled cement

concrete M 200 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

work in (D) Columns, pillers posts,

and struts upto floor two level

(S.O.R P. no.77 . Item No.5.8.2

Item code 05024DA 34.80 4528.83 Rs/cmt

11 Providing and laying controlled cement

concrete M 200 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

work in (E) Staircase excluding

landing upto floor two level

Item code 05024EA 1.83 5476.50 Rs/cmt

12 Providing TMT Bar FE 500/500D

reinforcement for r.c.c. work including

bending, bindings and placing in

position comp.upto floor two level.

Item code 05014C)

13 Providing formwork of ordinary timber

planking so as to givea rough finish

including centering shuttering strutting

and propping etc. Height of propping

and centering below supporting floors

to ceiling not exceeding 4 m and

removal of the same for in situ

reinforced concrete and plain

cement concrete work in.

(A) Foundations Footings bases of

columns etc. and Mass concrete.

(S.O.R P. no.95 Item No.9.1

Item code 09001AA. 29.16 178.61 Rs/smt

14 Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. Height of propping

and centering below supporting floors

to ceiling not exceeding 4 m and

removal of the same for in situ

reinforced concrete and plain

cement concrete work in.

(G )Coulmns, pillers posts and

struts (1) Squares Rectangular

polygonal in plan. 330.41 315.87 Rs/smt

(S.O.R P. no.95 Item No.9.1

Item code 09001G1A.

15 Providing formwork of ordinary timber

planking so as to givea rough finish

including centering shuttering strutting

and propping etc. Height of propping

and centering below supporting floors

to ceiling not exceeding 4 m and

removal of the same for in situ

reinforced concrete and plain

cement concrete work in.

(H )(1) sides and soffits of Beams

Beam Haunchings cantilevers

Girders Bressumers and lintels

not exceeding 1 M in Depth.

(S.O.R P. no.96 Item No.9.1 741.58 205.07 Rs/smt

Item code 09001H1.

16 Brick using common burnt clay

building bricks having crushing

strength not less than 35 kg./sq.cm.

in foundation & plinth in cement

mortor 1:6 (1 cement : 6 fine sand)

(B) Conventional

Item code 06002BA 19.56 4172.60 Rs/cmt

17 Brick using common burnt clay

building bricks having crushing

strength not less than 35 kg./sq.cm.

in Super structure in cement

mortor 1:6 (1 cement : 6 fine sand)

(B) Conventional

Item code 06002BA) + 110.00 4451.53 Rs/cmt

Item code 06006B)

18 (i) Half brick masonary in common

burnt clay building bricks having

crushing strength not less than

35 kg/sq.cm in cement mortor 1:4

(1 cement : 4 coarse sand ) in

super structure above floor two level

(B) Conventional

(S.O.R.P.no.89 it no.6.30 77.46 629.84 Rs/smt

Item code 06008A2A)+

Item code 06011BA)+

19 Providing 15mm th plain cement plaster

in single coat on fairside brick concrete

wall for interior plastering upto floor

two level finished even and smooth in.

(ii) Cement plaster 1:4

(1 cement: 4 sand)

(S.O.R P. no.136 Item No.17.60 1210.85 163.39 Rs/smt

Item code 17002B.

20 Providing 20mm thick double coat mala

cement plaster on interior brick/concrete

work for plastering comprising of base

coat of 12mm thick cement plaster

in cement mortor (1 cement : 4 coarse

sand ) in rough finishingand 8mm thick

top coat of cement mortor 1:2 (1 cement

:2 coarse sand ) finished with trovel

including scafolding curing etc comp.

S.O.R.P.No.138 It code

21 20mm th sand faced cement

plaster on wall upto ht 10mt above

ground level consisting of 12mm

th backing coat of c.m. 1:3 (1cement:

3 sand ) and 8mm th finishing coat of

of c.m.1:1(1 cement :1 sand etc comp

it code 17009 116.69 317.52 Rs/smt

22 Providing and applying on walls

exterior surfaces of HERITAGE

textures granules finish trowelled over

20mm thick sand faced cement plaster

(two coat of 12mm thickin

c.m. 1 :3 & 8mm coat in c.m. 1:1 )

sub strata to get an average finish coat

of 0.8mm to12mm comprisingof three

components of viz. dry granules

Granules bonding agent

and top coatof Glossy finish

(Dry granules shall be made from

silica sand, pigments, primarily

inorganic) pure acrylic copolymer

emulsion mix etc. and top coat made

from solvent acrylic co-polymer

emulsion,borad spectrum fungicide

produce including

scafolding, surface preparation with all

contractor’s material , labour, tools,

plants, lead, lift and transportation

etccompas per specification and as directed

by the engineer in charge.

23 Providing and applying on walls

exterior surfaces of HERITAGE surface

textures granite finish trowelled over

20mm thick sand faced cement plaster

(two coat of 12mm thickin

c.m. 1 :3 & 8mm coat in c.m. 1:1 )

sub strata to get an average finish coat

of 0.8mm to12mm comprisingof three

components of viz. dry granites flakes

flakes bonding agent

and top coatof Glossy or mat finish

(Dry granites flakesaremadeof china

clay pigments,(chiefly

inorganic) homo-polymeremulsion mix

etc. bonding agent made of acrylic

co-polymer emulsion,borad spectrum

fungicide produce including

scafolding, surface preparation with all

contractor’s material , labour, tools,

plants, lead, lift and transportation

etccompas per specification and as directed

by the engineer in charge.

24 Applying two coats of Birla or Asian

acryllic lappy (putty) and two coats of

primer of approved brand and

manufacture on new wall surface to give

an even shade including throughly brushing

the surface free from mortar dropping

and other foreign matter and sand

papered smooth.

S.O.R.P.No.146, It code 19032 1096.32 40.19 Rs/smt

25 Wall painting Two coats with plastic

emulsion paints of approved brand and

manufacture as per engineer instruction

on wall surface to give an

even brushing the surface free from

mortar dropings and other foreign

matter and sand papered smooth.

S.O.R.P.No.142, It code 18031 1096.32 82.36 Rs/smt

26 Finishing wall with weather proof

exterior emulsion paint on wall surface

(two coat) to give an required shape and

even shade after throughly brushing

the surface to remove all dirt and

remains of loose powdered material

(S.O.R P. no.146. Item code 19031. 116.69 73.10 Rs/smt

27 Providing and fixing 35mm thick

shutter for doors,window and

clearstory window including idnian

teak wood 12 cm x 7 cm size incl

anodized alluminium fixtures and

fatening including primer coat of

approved quality and two coats of

oil painting etc comp.

(ii) Fully Pannelled

(S.O.R.P no.103 it.code.10030B 14.39 5285.45 Rs/smt

28 Providing and fixing Flush Door

shutters solid core construction with

cross board and face veneer or

plywood face panels, including

anodized alluminium butt hinges

with necessary screws.

(B) Decorative type and block

board core anodized alluminium

butt hinges in flush door shutters

Item code 10011 21.51 1811.62 Rs/smt

29 Providingand fixing M.S. Grill of

required pattern to wooden frame

of windows etc. with M.S. flats at

requiredspacing and frame alround

square or round bars with round

headed bolts and nuts or by screws

Item code 10025AA 1809.77 105.18 Rs/Kg

30 Providing and fixing window having

extruded alumimium colour anodized

section frame main outer size 63.50x38.10

x1.95 (of jindal section no. 4605@ wt

1.094 kg/Rmt) horizontal two track

member sie 61.85mm x 31.75mm x 1.2mm

(of jindal section no. 8687.@ wt.

lg/mt ) vertical member of size 61.85mm

x 31.75mm x 1.30mm (of jindal section

no 8758 @ wt 0.659 kg/mt) with sliding

shutter of horizontal member of size

40mmx 18mm x 1.29mm (of jindal

section no. 8947 @ wt of 0.456 kgmt

/section 8948,@ wt. 0.457 kg/mt) with 5mm

th transparent bronze colour tinted flot glass

with powder coated aluminum fittings and

fixtures and transparent silicon sealent

glass fixing to frame as per details

etc completed for window.

S.O.R.P.No.117 It code 11028 22.95 1696.73 Rs/smt

31 Providing and fixing extruded aluminum window

having extruded aluminum colour anodized section

frame main outer size 127mm x 38.10mm x

1.35mm (of Jindal section no. 2443@ Wt.

Kg/mt), horizontal four track member size

122.20mm x 31.75mm x 1.10mm (of Jindal section

no. 8787, @ Wt. .205 Kg/mt), vertical member of

size 122.20mm 31.75mm x 1.50mm (of Jindal

section no. 8935 @ Wt. 1.398 Kg/mt) with sliding

shutters of horizontal member size 40mm x 18mm

x 1.29mm (of Jindal Section No. 8949 @ Wt. of

0.456 Kg/mt), vertical member of size 40mm x

18mm x 1.29 mm (of Jindal section no: 8947 @

Wt. of 0.456 kg / mt/ Section 8948@ Wt.

Kg/Mt) with 5 mm th transparent bronze colour

tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc. for window.

S.O.R.P.No.117, It code 11026 22.29 2119.14 Rs/smt

32 Provide and laying 24"x24" Vitrified

8mm thick tiles flooring

over 20mm base of cement mortor

1:6 (1 cement : coarse sand

on new surface or fixing on existing

flooring by adhasive materials including

dismentaling of exisitng flooring

and jointed with colour cement slurry

including finished with flush pointing

and cleaning the surface etc comp.

for Light shade

S.O.R.P.No.130 It code 14022A 260.73 1331.27 Rs/smt

33 Provide and laying Ceramic tiles 6mm

th in flooring treads of steps and landings

laid on a bed of 12mm thick cement mortor

1:3 pointing in white cement and jointed

with white cement slurry.

S.O.R.P.No.127 It code 14008BA 21.65 977.37 Rs/smt

34 Provide and laying Glazed tiles 6mm

th in skirting risers of steps and dedo

laid on a 10mm thick cement mortor

1:3 pointing in white cement and

jointed with white cement slurry

S.O.R.P.No.128 It code 14009AA

35 Provide and laying Grenite stone slab over

20mm thick risers of step and dedo on

10mm thick cement plaster 1:3 pointing

in white cement and jointed with white

cement slurry.including rubbing &

polishing etc comp. 97.31 3644.07 Rs/smt

S.O.R.P. no.22 sr.no.453, code M395

36 Providingand laying marble stoneslab

flooring over 20mm thick base of cement

mortor 1:6 (1 cement : 6 coarse sand

and jointed with grey cement slurry

rubbing and polishing etc comp.

Marble 25mm thick

S.O.R.P.No.128 It code 14011A

37 Providing and laying broken chine mosaic

flooring for terrace using 12mm to 20mm

broken pieces of glazed tiles to be laid over

cement mortor 1:3 to plain or slope and to

be tempered to bring mortar crème out

upto surface using white cement including

rounding of junctions and extending them

upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

S.O.R.P.No.130 It code 14035 173.52 771.98 Rs/smt

38 Providing electric light fittings

as per point plan and engineer

instruction incl all acceries etc comp.

S.O.R.P.No.1 Sr.No.1.1.1, A + 100.00 567.00 Rs/point

39 Labour of Grenite Moulding work

as per design and instruction etc comp. 509.44 85.00 Rs/Rmt

S.O.R.P. no.38 sr.no.782, code M724

40 Providing and fixing concealed centre

points to wall ceilingand floorCPVC

(SDR 13.5 PIPE) having National

Sanitation Foundation (NSF) seal

for potable water of following dia.

nominal bore tube fittings and clamps

including making good the wall, ceiling

and floor etc comp.

S.O.R.P. no.167 it.code no.

(A) 15mm dia 20.00 168.67 Rs/Rmt

41 Providing and fixing concealed centre

points to wall ceilingand floorCPVC

(SDR 13.5 PIPE) having National

Sanitation Foundation (NSF) seal

for potable water of following dia.

nominal bore tube fittings and clamps

including making good the wall, ceiling

and floor etc comp.

S.O.R.P. no.167 it.code no.

(A) 20mm dia 20.00 206.73 Rs/Rmt

42 Providing and laying and jointing

in true line and level 15mm dia

U.P.V.C. Pipe (sch-40) for cold

water including fitting make

FINOLEX or equvalent as approved

by engineer in charge. Pipe shall be

fixed on the wall with the help of

clamp at every two meter C/C or

shall be concelled as direced including

necessary fittings etc. including

testing of pipe and joints and fixing

the same with adhesive solvent,

including cost of all materials.

S.O.R.P. no.168 it.code no.

(A) 15mm dia 30.00 71.93 Rs/Rmt

43 Providing and laying and jointing

in true line and level 25mm dia

U.P.V.C. Pipe (sch-40) for cold

water including fitting make

FINOLEX or equvalent as approved

by engineer in charge. Pipe shall be

fixed on the wall with the help of

clamp at every two meter C/C or

shall be concelled as direced including

necessary fittings etc. including

testing of pipe and joints and fixing

the same with adhesive solvent,

including cost of all materials.

S.O.R.P. no.168 it.code no.

(A) 25mm dia 30.00 90.93 Rs/Rmt

44 Providing and laying and jointing

in true line and level 32mm dia

U.P.V.C. Pipe (sch-40) for cold

water including fitting make

FINOLEX or equvalent as approved

by engineer in charge. Pipe shall be

fixed on the wall with the help of

clamp at every two meter C/C or

shall be concelled as direced including

necessary fittings etc. including

testing of pipe and joints and fixing

the same with adhesive solvent,

including cost of all materials.

S.O.R.P. no.168 it.code no.

(A) 32mm dia 15.00 117.97 Rs/Rmt

45 Providing and laying and jointing

in true line and level 40mm dia

U.P.V.C. Pipe (sch-40) for cold

water including fitting make

FINOLEX or equvalent as approved

by engineer in charge. Pipe shall be

fixed on the wall with the help of

clamp at every two meter C/C or

shall be concelled as direced including

necessary fittings etc. including

testing of pipe and joints and fixing

the same with adhesive solvent,

including cost of all materials.

S.O.R.P. no.168 it.code no.

(A) 40mm dia 10.00 146.65 Rs/Rmt

46 Providing and laying and jointing

in true line and level 50mm dia

U.P.V.C. Pipe (sch-40) for cold

water including fitting make

FINOLEX or equvalent as approved

by engineer in charge. Pipe shall be

fixed on the wall with the help of

clamp at every two meter C/C or

shall be concelled as direced including

necessary fittings etc. including

testing of pipe and joints and fixing

the same with adhesive solvent,

including cost of all materials.

S.O.R.P. no.168 it.code no.

(A) 50mm dia 20.00 193.73 Rs/Rmt

(b)75mm dia 20.00 143.22 Rs/Rmt

(c)110mm dia 30.00 262.71 Rs/Rmt

47 Providing and fixing PVC SWR

trap IS 14735 for drain -100mm

diameter with jali of the following

nominal diameter of self

cleansing design with C.I scread

down or hinged grating including

the cost of cuttingand marking good

S.O.R.P. no.169 it.code no.

(A) 100mm dia. 2.00 726.00 Rs/No.

48 Providing and fixing PVC SWR Nani

Trap conforming to IS 14735 for

diameter drain with jali, self-cleansing

design, complete with C.I. screw-down

or hinged grating, all necessary PVC

SWR fittings, solvent cement, jointing,

cutting, testing and making good the

wall, complete as directed by the

Engineer-in-Charge.

(A) 100mm dia. 8.00 74.58 Rs/No.

S.O.R.P. no.42 sr.no.866, code M808

49 Providing and fixing S.W. gully trap

with C.I grating brick masonary

chamber and water tight C.I cover

with frame of 300mmx 300mm size

(inside) with standered weight

(1) Square mouth traps

(A) 100mm x 100mm size p-type

it.code no. 24006AA 4.00 1279.40 Rs/No.

50 Providing and fixing in position

cowl vent to pipe

S.O.R.P. no.163 it.code no. 23006B

(B) 75mm dia 3.00 389.15 Rs/No.

51 Providing and fixing in position

cowl vent to pipe

S.O.R.P. no.163 it.code no. 23006C

100mm dia 3.00 500.17 Rs/No.

52 construction brick maonary road gully

chambers 500mm x450mmx 600mm

including 500mmx450mm c.i horizontal

grating with frame etc comp.

item code 24013A

53 Providing and fixing wash basin with

single hole for piller rap with c.i. or m.s.

brackets painted white including cutting

holes and making good the same but

excluding fittings (550 x400 mm)

54 Providing and fixing c.p brass towel rail

complete with c.p.brass bracket fixed

to wooden plugs with c.p. brass screw

55 Providing and fixing screw down

bib taps of size (brass cromium

plated screw down bibtap

(item code 23028A1

15 mm dia 20.00 184.98 Rs/No

56 Providing and fixing piller tap

capstan head screw down high

pressure with screw snakes and

back nuts (A -15 mm dia)

(item code 23029A

57 Providing and fixing gun mettal check

or non return full way wheel valve

item code 23031A

58 Providing and fixing ball cock of

approved quality as per instrction

(copper metal 25 mm dia )

S.O.R.P.No.166 it. code 23037A1 2.00 131.57 Rs/No.

59 Providing and fixing urinal of approved

quality including connection with tap

and with integral longtudinal flush pipe.

60 Providing and fixing 600mmx450mm

beveled edge mirror of superior glass

mounted on 6mm thick a.c. sheet

or plywood sheet to fixed to wooden

plugs with c.p brass screws and washers

61 (Indian type W.C.pan) size 580 mm. (Earth work,

Bed concrete foot rests and trap to be measured

and paid for separately.)

(A) Vitreous china

(I) Long pattern white colour

item code 23009 1.00 982.33 Rs/No.

62 Providing and fixing wash down water closet

(European type, W.C. Pan with integral 'P' or 'S'

trap including jointing the trap with soil pipe in

cement mortar 1:1 (1 cement : 1fine sand) (seat

and cover to be measured and paid for separately)

(A) Vitreous china pattern

(I) In white color 4.00 1343.38 Rs/No.

63 Providing and fixing C.I Man

hole cover 0.60m x 0.45m size having

weight not less than 35 kgs

S.O.R.P.No.167 it.code 23038 4.00 948.68 Rs/No

64 Supplying and fixing C.I cover

300mm x 300mm without frame for

gulley trap the weight of cover to

be not less than 4.35 kg.

item code 24011A

65 Providing and fixing 12.5 litres low

level flushing cistern with a pair of

C.L.I . Or mild steel brackets, comp

with fittings such as lead value siphon,

15mm nominal size brass ball valve with

polythene float, C.P. Brass handle

unions and couplings for connections

with inlet, oylet and over flow pipes

40mm dia porcelain enameled flush

bend including cutting holes in walls

and making good the same

connecting the flush bend withj cistern

(A) vitereous china (i) in white colour

66 Providing and fixing plastic seat and

cover for wash down water closet

with c.p. brass hinges and rubber

(B) black plastic seat & cover 4.00 288.45 Rs/No

67 Providing and fixing C.P.Brass shower

rose with 15mm or 20mm inlet

68 Providing and fixing S.S. Railing

for staircase approved quality incl

all accessoires and necessary fittings

as per engineer instruction etc comp. 15.00 1004.24 Rs/Rmt

S.O.R.P. no.37 sr.no.772, code M714

69 Providing erecting and fixing double

coated sintex or equvalent PVC (ISI)

mark water tank of required capacity

each with all necessary fitings and

connectioin etc comp on terrace.

S.O.R.P.No.158 item code 22014 4000.00 3.91 Rs/Ltr

70 Applying priming coat over new steel

and other metal surface after and inclduing

preparing the surface by throughly cleaning,

oil, grease, dirt and other foreign matter and

scoured with brushes fine steel wool,

scrapers and sand paper with ready mixed

printing paint brushingred lead.

S.O.R.P.No.143 It code 19001 67.87 36.06 Rs/smt

71 Painting two coats (excluding priming

coat) on new steel and other metal

surface with synthetic enamel paint,

brushing to give an even shade incl.

cleaning the surface of all dirt dust

and other foreign etc.

S.O.R.P.No.143 It code 19005 67.87 67.89 Rs/smt

72 Providing sock pit of 1.82 internal dia

meter and 6.00m depth including

excavation and filling brick bats with

masonry work height including covering

the top with RCC slab including vatas in

CM 1:3 including finshing and curing

etc complete as per detail drawing.

1% Labour cess Rs

add :- GST 18 % Rs

add :- 3 % Contigency charge amount Rs

add :- 1 % Quality Control Rs

I AGREE TO DO THE ABOVE WORK

AT THE RATE OF % ABOVE / LESS

THAN THE ESTIMATED RATES WHICH ARE COATED

IN THE TENDER COPY.

MANSUKH N. PATEL

Consulting Engineer Contractor

A.P.M.C. LAKHANI

Secretary The Chairman

A.P.M.C. LAKHANI A.P.M.C.LAKHANI