Replacement of damaged 50HP DVD pump set with 60HP Submersible Dry pit vertical drive DVD NonClog Sewage pump sets at Vambey Colony drainage pumping station in circle I area

Supply and Delivery of Electrically drive (415 Volts, 3 Phase, 50Hz) Non- clog Horizantel /Vertical Submersible Dry pit pump sets pumping of screned sewage water with soft solieds up to 100 mm size of required capacity as mentioned below. The pump should be fitted with S.S impeller, SS shaft as per IS specification with cast iron casing of heavy duty of 1450/960 RPM of Kishor/grundfos/Jyoti/KSB and Approved make and including required 15Mtrs cables,required Guide pipe and required lifting chain & Pedestal bracket,support plate (MS),Suction bend (CI) etc.,., complete set (The pump sets at minimum efficiency of 70% shall deliver the above discharge and head) for the following duty conditions. 45KW Power,60HP, 500 CUM/Hr. 21 Mtrs. Head with 200MM dia delivery, 60HP, Submersible Dry pit pump sets etc complete including cost and conveyance of all material as directed by the deprtmental authorities. (600 CUM/Hr. 21 Mtrs. Head with 200MM dia delivery, 60HP, Submersible Dry pit pump sets cooling jacket)

Supply, delivery and replacement of totally enclosed floor Mounted Bus - bar type dust and vermin proof L.T. Power Distribution Control Panel board to operate above pump sets. The panel should be fabricated with 16 gauge M.S.Sheet Rating Aluminum Bus bars for 3 phase and one Neutral Complete as per IE eule with required capacity Accessories and internal wiring etc suitable for 1No 60HP Submersible Non Clog pump sets/Submersible Dry pit pump sets required capacity MCCBs, FASD Starters,selecter switches, Voltmeters and Ammeters, Capacitors, control circuits preventers, automatic water level controls, seal monitor relay, Overload Protection, Hour run meter, Multi function meter etc., with internal wiring and with indicating lamps etc as per I.E standards all required materials, transportation charges etc complete. (Internals of panel board and starters of make L&T/Siemens/C&S/Telemechanics.") etc complete as direceted by the departmental authorities (For 60HP Non Clog submersible pump sets)

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. PN 1.6 Make : Sigmaflow/upadhyay etc complete including cost and conveyance of all material as directed by the deprtmental authorities (200mm dia)

Manufacture, Supply and delivery of DI D/F Tilting disc Swing Check Valves (NRV) Slanted seated with maximum swing of 59 degree with metallic, corrosion proof and wear resistant seat faces, Body and Disc of ductile cast iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Shafts of stainless steel, shaft bearing of zinc free bronze and Integral body seat face & disc face with nickel-chromium overlay welding and micro finished. All the inside and outside of the body is to be coated with double coating of food grade epoxy liquid lacquer (EP-F) with minimum thickness of 150 microns, color: RAL 5005 Blue face to face dimensions according to EN 558-1/14/DIN 3202-F4, Flange dimensions according to EN1092-2/IS 1538 PN 1.6 Make : Sigmaflow/upadhyay etc complete including cost and conveyance of all material as directed by the deprtmental authorities. (200mm dia)

Supply, delivery, fabrication and fixing of MS pipe for suction and delivery line of "ZINDAL" or "TATA" make including cost of specials, coupplings, bends "Tee" etc., including cost and conveyance of all materials labour charges etc., complete as directed by the departmental authorities.

Cost of MS Flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness confirming to IS 7322-1985 and flange dimensions confirming to IS 1538-1993 excluding cost of MS specials including cost and conveyance to site, vat etc

SUPPLY AND DELIVERY OF BOLTS AND NUTS WITH DOUBLE WASHERS INCLUDING CONVEYANCE ETC., COMPLETE, BUT EXCLUDING TAXES. (1/2" TO 1") etc complete including cost and conveyance of all material as directed by the deprtmental authorities

SUPPLY AND DELIVERY OF RUBBER PACKING INCLUDING CONVEYANCE ETC., COMPLETE, BUT EXCLUDING TAXES. etc complete including cost and conveyance of all material as directed by the deprtmental authorities

Supply and delivery of 3 Ton capacity chain pully block (carban streel) of 36 mtrs lift with manual geared trolly of Indeff make complete as directed by the departmenatal authroities.

Labour charges for erection of pump set 60HP Submersible Dry pit pump sets,including Cran charges ,foundation, fabrication, welding, laying charges for pipe line including earth work excavation, electrical connections and trail run (in 30 Feet Well) etc., complete as directed by the departmenatal authroities.