T.No.-EDC(USN)39/2024-25

Amount

Annexure-A (LABOUR CHARGES)

Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and connecting the earth electrode with the help of G.I. wire as per construction manual.

Fabrication of MS Channel angle iron etc in required sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc. as per RESPO schedule and local approved drawing.

Fixing,tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in 33 KV Line.

Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand) block includ ing cost of Cement,sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual.

Erection of SP-55 single support pole in proper level and alignment along with fixing of all accessories like top channel& clamps a s per RESPO manual.

Erection of Sp-55 double support pole in proper level and alignment along with fixing of all accessories like top channel, X bracings & clamps as per RESPO manual.

Muffing of poles size 0.45x0.60 cm radius with 1:3:6(1 cement:3 coarse sand :graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement, stone and sand etc.

Painting of SP-55 pole with angle and channel and all steel part by one coat of Red Oxide Primer and two coats of aluminium Paint and two strip of fluorescent altemate Red and White paint 30 Cm wide upto 1.5 Mtrs. From ground level.

Laying, Spreading, Stringing and sagging of 33 KV line in 3 phase (3 Phase 3 wire) of ACSR Panther as phase wire with G.I. earth wire complete including fixing of all accessories in 3 Nos. conductor in parallel with binding and jumpering as per profile and profile and sagging chart.

Guarding of 33 KV Line over (Telephone / Road / L.T. line crossing as per drawing with 6/8 SWG G.I. wire including fixing of guardin g channel/ angle as per RESSPO manual.

Route cleareance by cutting of tree branches / proning, loping and chopping of trees for L.T., 11 & 33 KV line.

Cartage of ST pole SP-55 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21-50 Km)

Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends(distance 21-50 Km)

Headload cartage of SP-55 Pole from road to site(distance 0-1 Km)

Head load cartage of small material(distance 0-1 Km)

Dismantling of existing 33 KV line including disc fitting, Insulator, clamps, Nut & Bolts including rolling of conductor and cartage back from site to JE store (ACSR Panther/Dog)

Fabrication of X-Arm 33KV

Straightening of Tilted Single Pole 33 KV Structure

Replacement of 33 KV Damage Disc Insulators, Disc Fitting, Pin Insulator.

Laying G.S. Earth wire 7/16 SWG for providing Earth Wire on 33 KV Line.

Painting of Double Pole Struture of S.T. Pole SP-55/72

Erection of Poles and other line works where moving Hydra Crane Employed.

Straightening of Tilted X-Arm

Annexure-B (SUPPLY ITEMS)

Supply of Holding Clamps for Gaurding

Supply of Bracing Clamp for SP-55 with N/B

Supply of X-arm clamp for SP-55 with N/B

Supply of F-clamp

Supply of Stay Insulator

Supply of Number Plate with Clamp

Supply of Anti Climbing Device

Supply of Danger Board

Supply of PG Clamp for Panther

Supply of Stay Clamp with N&B

Supply of Reflective Tape 6 Inch

MANRAJ ELECTRICAL & INFRASTRUCTURE (BID ID -359779)

M/S J K ELECTRICALS (BID ID -359837)