Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.6 LAccepted-AOC 63 MANDIR LANE BALLUPUR CHOWK DEHRADUN 248001 | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC Acceptance of Contract | |
| 2 | L2₹48.6 L+₹2.8 L (6.10%)Rejected-AOC 79B MIG PHASE 1 INDIRA PURAM G M S ROAD DEHRADUN UK PIN 248171 | DEHRADUN | UTTARAKHAND | 248171 | L2 | Rejected-AOC R | |
| 3 | L3₹49.0 L+₹3.2 L (6.89%)Rejected-AOC 107 NEAR POST OFFICE PRENAGAR DEHRADUN 248 007 UK | DEHRADUN | UTTARAKHAND | 248007 | L3 | Rejected-AOC R | |
| 4 | L4₹49.7 L+₹3.9 L (8.41%)Rejected-AOC | L4 | Rejected-AOC R | |
| 5 | L5₹53.4 L+₹7.5 L (16.4%)Rejected-AOC | L5 | Rejected-AOC R |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE IMA Dehradun
GE IMA Dehradun
DAY TO DAY MAINT PETTY REPAIRS OF OTM MD ACCN UNDER AOR OF AGE BR I UNDER GE IMA DEHRADUN
2022_MES_531755_1
GE/IMA/T-35/2022-23 9217/E8
Open Tender
Support/Maintenance Service
Item Rate
334 days
GE IMA Dehradun
NIT
8 documents required · 8 mandatory
₹500
Yes
GE IMA Dehradun
₹90,000
Yes
20 Sept 2022
17 Jun 2022
28 Jul 2022
5 Jul 2022
26 Jul 2022
5 Jul 2022
Amount
Taking down 15 mm dia unserviceable bib cock/ stop cock/Pillar cock/Angle cock of any pattern or of any type and removing from site complete all as directed.
Taking down 15 mm dia bib cock / stop cock/Pillar Cock/Angle cock of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers, spindals, caps etc and refixing old serviceable bib cocks/ stop cocks/ pillar cock/angle cock any pattern (any major parts such as jumpers brass/ spindles/ caps etc to be measured and paid for separately.)
Supply and fixing bib cock PTMT standard 15 mm dia with capastan head complete male or female as reqd and as directed by Engineer Incharge,
Supply and fixing bib cock brass chromium plated 15 mm dia with capastan head, screwed down high pressure complete.
Supply and fixing stop cock brass/ cast copper alloy 15 mm dia with crutch or butterfly handle, screwed down high pressure complete.
Supply and fixing stop cock PTMT standard 15 mm dia with capastan head , complete male or female as reqd and as directed by Engineer Incharge.
Supply and fixing 15 mm dia angle cock/ angle valve chromium plated with capstain head screwed down high pressure complete all as directed.
Dismantling / taking down 20 mm dia unserviceable stop cock/Bib cock of any pattern or of any type and removing from site complete all as directed.
Taking down 20 mm dia stop cock/Bib cock of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers etc or refixing old serviceable stop cocks any pattern (any major parts such as jumpers brass/ spindles/ caps etc to be measured and paid for separately)
S & F 20 mm bore stop valves,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for GI pipe or for GI unions and fixed completed all as specified.
S & F Stop Valve Concealed Type in repair 15 mm Cast Copper Alloy Capstain head, Chromium plated with long shank and cup, high pressure, screwed both ends for iron pipe or for unions and fixed complete.
Supply and fixing in repairs ball Cock PTMT 20 mm dia high pressure with alluminium rod epoxy coated and HD Ball and Brass flynut complete, screwed for iron pipe or for brass ferule fixed complete all as specified.
S & F in repairs centre hole basin mixer 15 mm dia, Brass Chromium plated complete all as specified
Supply and fixing in repairs 15 mm bore Pillar cocks chromium plated brass with capstain head screwed down high pressure complete.
All as per items No 14 here-in-before but with Swan Neck 15 mm size complete.
S & F in repairs CP shower rose with arm length 200mm & flange 15 mm bore pipe complete all as specified.
Supply and fixing in repair Waste coupling 40 mm , brass chromium plated for sinks with long screwed shanks and fly-nuts, flange end bedded with teflon tape & M-Seal.Complete all as directed.
Supply and fixing in repair Waste Coupling 32 mm , brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded with teflon tape & M-Seal. complete all as specified and directed by the Engr-In-Charge.
S & F PVC Connections 15 mm size with PTMT nuts of length 450 mm.
S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified.
S & F in repairs Vitreous China wash down water closet pan, white including PVC polymer water closet seat, black, closed pattern with flat bottom, cover and Stainless steel hinging device.
S & F in repairs Vitreous China wash hand basin, white, flat back, size 550 x 400 mm including waste coupling and PVC waste pipe up to floor trap and fixed complete all as specified.
S & F in repairs Beveled edge Looking Mirror 5 mm thick size 600 x 450 mm fixed on commercial ply wood 6 mm thick fixed to wooden plugs with chromium plated brass screws and 1" Spacers with cup washers and fixed all as specified.
S & F in repairs Toilet Paper Holder PTMT and fixed complete all as specified.
S & F in repairs 10 ltr capacity PVC low level flushing cistern, syphonic action type, white, with inlet, ball valve, float and handle including brackets and fixed all as specified.
S & F in repairs Flush Pipe of polyethylene/ PVC, 32 mm dia, for low level flushing cistern and fixed all as specified.
S & F in repairs plastic water closet seat cover, white, closed pattern with flat bottom, and cover and stainless steel hinging device and fixed all as specified.
S & F in repair PVC Waste Pipe 32 to 40 mm dia & length (expandable 1 mtr) for WHB/Sink up to floor trap and fixed complete all as specified.
S & F in repair PVC Waste Pipe 32 to 40 mm dia & length (expandable 1 mtr) for URINALS up to floor trap and fixed complete all as specified.
S & F in repairs Stainless steel curtain Rod Fancy type 25 mm Bore and 1mm thickness with fixing brackets, end feneals etc. as approved by Engr-in-Charge
S & F in repairs Tublar towel rail 24" long , 20 mm dia, Brass Chromium plated complete all as specified.
S & F in repairs PTMT towel rail 24" long, complete all as specified
S & F in repairs mirror cabinet in PTMT Make Prayag and fixed complete all as specified
S & F in repairs PVC Jet spray with 1.50 m tube for wash down water closet (pedestal pattern) and fixed complete all as specified
S & F in repairs Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails complete all as specified
S & F in repairs MS Butt Hinges medium weight, cold rolled mild steel 100 mm fixed to steel/wooden shutters complete all as specified
All as per serial item No 36 above but 45 mm long complete all as specified.
S & F in repairs MS Rat tail pattern/ helical doors spring 150 to 200 mm, ordinary springs including roller and roller plate complete all as specified.
S & F in repairs 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified.
Supply and fixing in repairs 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified.
All as per serial item No 40 above but 150 mm long
S & F in repairs 125 mm long Aluminium handles, fabricated type, anodised and fixed complete all as specified
S&F in repairs 150mm dia Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified.
Supply and fixing in repairs cast iron body hydraulic door closers universal type designation No 3 suitable for door shutters of 850 to 1000 mm wide. Complete all as directed.
S & F in repairs 100 mm long Hasp and Staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified.
S & F in repairs Small fittings of 2nd Class Hardwood such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu.m each and fixed complete all as specified.
M & L in repairs Plain fillets 2nd Class hardwood not exc 3 sq. cement mortar, square, rectangular or triangular in section, chamfered or rounded on one edge or face, secured with nails and fixed complete all as specified.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed all as specified.
S & F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size pane and fixed all as specified.
All as per serial item No 49 above but frosted glass complete all as specified.
M & L for Securing old glass of any description in existing steel/wooden frames glazed with putty/beads including removing loose or decayed putty/beads, reputtying to match existing work etc. and fixed all as specified.
Taking down chowkats or frames exc 1.5 sqm and n.exc 4 sqm each (wuthout taking off shutters from the frame and removing from the site.
All as per ser Item No 52 above but n,exc 1.5 sqm each
S & F in repair pressed steel door frame of size 125x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as directed.
Providing and fixing factory made polyvinayl chloride(PVC) door frame size 100x50 ,, with a wall thickness of 5mm,made out of extruded 5mm PVC foam sheet,miter cut at two corners and joined with 2 nos of 150mm long brackets of 15mmx15mm MS Square tube.the two vertical door profiles are to be reinforced with 40mmx20mm MS Square tube of 19 gauges,EPDM rubber gasket weather seal to be provided through out of fram. the door frameshall be fixed to the wall using 65/100mm long MS Screw through the frame by using PVC fastener.A minimum of 04 Nos of screws to be provided for each vertical member & minimum 4 nos for horizontal member etc. complete all as specified and directed by the Engr-In-Charge.
Providing and fixing factory made polyvinayl chloride(PVC) door frame size 50x47 ,, with a wall thickness of 5mm,made out of extruded 5mm PVC sheet,miter cut at two corners and joined with 2 nos of 150mm long brackets of 15mmx15mm MS Square tube.the two vertical door profiles are to be reinforced with 19mmx19mm MS Square tube of 19 gauges,EPDM rubber gasket weather seal to be provided through out of fram. the door frameshall be fixed to the wall using 65/100mm long MS Screw through the frame by using PVC fastener.A minimum of 04 Nos of screws to be provided for each vertical member & minimum 2 nos for horizontal member etc. complete all as specified and directed by the Engr-In-Charge.
S & F Factory made solid panel PVC cupboard/cupboard shutter/door shutter 25 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet, strip of 20mm width stuck inside with solvent cement for stiles and plain. colour PVC sheet for top rail and bottom rail on either side and as gap in sorts of top rail and bottom rail padding of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the format site as per specification and drawing.
Providing and fixing 30mm thick consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat molded “GIZA” PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert For top rail & bottom rail. Paneling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails With 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An Additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent cement Adhesive. Complete as per direction of Engineer-incharge, manufacturer’s specification & drawing.
Providing and fixing 32mm Thick brand Factory made PVC Flush door shutter consisting of panel of Hollow PVC Profile of 20 mm thickness, consisting of frame made out of M.S.tubes of 19 guage thickness and size of 19 mm x 19 mm inserted inside the hollow section of stiles, top and bottom rails and two 19mm x 19mm inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 5mm thick PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mm x 2) thick x 20 mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5 mm thick termite proof, water proof and fire retardant PVC sheet using solvent cement on both side of the panel etc. complete as per direction of Engineer – in- charge, manufactacturer’s specification and drawing.
S & F Factory made, 35 mm thick plain framed panelled shutter (two panel) of second class hard wood rail and style with lock rail and panel of 9 mm BWP commercial ply. The size of rail and style as per IS : 1003 Part I, klin seasoned and chemically pressure treated, all as specified and directed.
S & F 35mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.
Dismentling floor hearth or wall tiling including cement motor bedding (But not backing), removing inserviceable tiles or stone and rubbish off the premises
M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6- 7 mm thick in floor, set and jointed in tile adhesive/cement mortar and pointed in coloured grout to match over and including 15 mm thick screed in cement mortar 1:6 complete.
M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x600mm x 7mm/ 450x 350 x 7mm thick over and including 10 mm thick bedding layer in cement mortar 1:4 , set and jointed in tile adhesive/cement mortar and pointed in coloured grout to match all as directed.
Demolition of Stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc. and removing unserviceable stone & rubish of the premises of MOD land.
S&F granite 15-18mm thick of Zed Black/Telephonic Black ( table rubbed and polished in steps, jambs pillars, window cill, cooking platform and like in tile adhesive incl pointing in coloured grout complete all as specified and directed.
S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete.
Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed and removing unserviceable stone & rubish of the premises of MOD land.
M&L for rendering 12 mm thick on brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge.
M&L for new plastered surface of walls including corners and applying two coats of distemper oil emulsion over applying of 2-3mm thick wall care putty finish wall surface even & smooth by roller complete all as specified and directed.
S & F in repairs Healt facut with 1.50 m tube and two way CP Bib cock for wash down water closet (pedestal pattern) and fixed complete all as specified
Demolition of brick work or stone/boulder masonry built in cement mortar on cement lime mortor and removing rubbbish of out side MoD land
M&L for brick work with sub class ‘B’ brick (old size) straight or curved on plan exc 6m mean radis built in cement mortar 1:6 complete.
M&L for Chequered cement concrete tiles glossy finish coloured 25 mm thick of any size and pattern as approved by GE as in patches in floor set & jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over.
Taking down shutters of any description n. exc 1 sq. m and refixing in same opening after easing, adjusting and replacement of minor nails etc complete.
Description all as per item ser No 76 above but exc 1 sq. m and n. exc 2 sq. m each
Resecuring or easing & adjusting, without taking down shutter of any description n. exc 1 sq. m each
All as per item ser No 78 above but exc 1 sq. m and n. exc 2 sq. m each
Supply and fixing in repairs Ply Wood 4 mm thickness, grade BWR, type BB fixed with screws/nails to timber framework of pasted with glue/ fevicol adhessive etc., complete all as specified.
Supply and fixing in repairs Ply Wood 6mm thickness, grade BWR, type BB fixed with screws/nails to timber framework of pasted with glue/ fevicol adhessive etc., complete all as specified.
S & F in repairs 19 mm thick block board grade-2 quality interior grade, commercial type for cupboard, almirah and shelves etc. complete all as specified.
Supply and fixing in repairs 19 mm thick MDF Board interior grade pre-laminated on one side and other side balancing white lamination in any position such as cup boards, drawers, shutters etcc., fixed with screws to timber frame work complete.
All as per serial item No 83 above but laminated on both sides complete.
Repair to steel Door, Window and Ventilators by spot or running welding including repair of MS Butt Hinges any size to steel chowkets by bringing welding plant at site complete
Taking up or down 15 mm bore steel tubing and connections, including cleaning etc.
S&F for 15 mm Bore Steel Water Tubing 'Medium Grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors.
All as per serial item No 87 above but using old serviceable pipes 15 mm bore dismantled under item No 87 above.
Taking up or down 20 mm Bore steel tubing and connections, including cleaning completed all as specified.
S & F for 20 mm bore Steel Water Tubing 'Medium Grade' galvanised, with all fittings and fixed complete to walls and ceiling or laid in floors.
All as per serial item No 90 here in before but using old serviceable pipes 20 mm bore dismantled
Cutting chases in brick walls girth exc 10 cement mortar but not exc 20 cement mortar wide for consealed water tubing etc and making good in cement mortar 1:3 or PCC 1:2:4 as reqd complete all as directed
Supply and fixing in repairs PTMT Ball valves 20 mm bore, high pressure with epoxy coated Aluminium rods & high density plastic ball screwed and fixed complete.
All as per serial No 93 above but 15 mm size complete
S&F in repairs PVC Knob/Handle (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as directed.
S&F in repairs PVC Syphon (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as directed.
S&F in repair complete Veta Washer set (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as directed.
Fixingonly low level flushing cistern any capacity after carrying out minor repairs such as stopping of leakage etc. complete all as directed.
Cleaning and removing all scale and dirt, etc. from over head water tanks and from mouths of circulating pipes of capacity exc 250 ltr but not exc 500 ltr vacumation, dewatering, desludging, rubbing internal surfaces with soft sponge & medium hard sponge to remove coglation with vinegar solution or light acid, drawing the tank by wet vaccume cleaner, disinfecting the internal surfaces with Kmnou solution & drying it again with vaccume cleaner and marking the outer surface of overhead tank with synthetic enamel paint using stancils (Date of cleaning month & Year)
Description all as per serial item No 99 above but capacity of water tanks exc 500 ltr and not exc 1000 ltr
Description all as per serial item No 99 above but capacity of water tanks exc1000 ltr and not exc 2000 ltr
S&F in repair covers for PVC over head water tanks 300/500/1000 ltrs capacity (as per sample) complete all as directed.
S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical top) hoisted and fixed in position complete 500 litre capacity.
S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical top) hoisted and fixed in position complete 1000 litre capacity.
S&F in repairs PTMT/ CP bottle trap 32 mm size for WHB complete all as specified and as directed (As per sample)
S&F PTMT grating 125 mm dia with or without waste hole fixed in repairs complete all as specified and as directed.
S&F PTMT grating 100 mm dia with or without waste hole fixed in repairs complete all as specified and as directed.
M&L for preparing new wooden surfaces and applying two coats of synthetic enamal paint over a coat of wood primer complete.
Supply and fixing in repairs CI lid for inspection hole of CI bend, traps Y junction T junction, etc fixed with nut and bolt, fixed as in repair including removing old nuts by drilling or welding complete all as specified and directed.
Supply and fixing in repairs cast Iron bends 100mm dia bore ( any radius), diminishing pieces or tapers ( larger bore measured) in cement joints complete all as specified and directed.
Supply and fixing in repairs MS powder coated peg set of three complete all as specified.
S&F double action spring hinge 100mm long mild steel with steel wire spring stove enameled black all as directed.
S&F 300mm long M.S ordinary Helical door spring incl roller and roller plate all as specified.
Demolition of Cement concrete of any description in any position not otherwise specially provided for Sunken floor etc complete all as specified and directed
40mm thick PCC (1:2:4) type B-1 (using 20mm grade crushed stone aggregate) as in flooring finishing the surfaces even & smooth without using extra cement.
S & F Cast iron soil, waste and vent pipe, 100mm bore, sand cast in any length, with or without ears, with cement joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified after taking down of existing unserviceable pipe
S & F Cast iron soil, waste and vent pipe, 75mm bore, sand cast in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections, fixed as in repair complete all as specified
Attending complaints like leakge of taps, angle valve stop coks or in pipes, fitting and removing of plumbing fittings such as Bib taps , pilllar taps, GI tubing , stop cocks, angle vales, float valves water tanks, grating, traps , WCs flushing cistern, waste pipes, WHBs, EWCs and similar work for continuity of essential internal water supply/sanitary services by employing an experienced team of plumbers and helpers to restore the exiting/services to the satisfaction of Engineer-in-Charge. Note :- (i) T&P including convence to reach door to door for attending the compaints will be provided by the contractor. (ii) Material will provided by seggregation of complaints to the contractor and will be measured & paid as supply. (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor or higher authority rep in writing. (iv) The area/Location of of complaints will be all MD and OTM accn in AOR of AGE B/R-I. (v) If any complaint not attended by contractor with in 08 hours contractor will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill.
Attending complaints related to carpenter work and obtaining completion from user including repair/easing of doors re-fixing or tightening of doors, windows, resecuring of door/window wire guage, (fixing only) builders hardwares, helical door spring including use of all types of nails, screws etc which are required to make good the work, use of any other stores/fittings shall be paid seprately under Supply only items in building to continuity of essential carpentry service by employing a team of experienced carpenters with a helpers to restore the existing service to the satisfaction of Engineer-in-Charge. All as directed T&P for attending the job will be provided by the contractor. Note :- (i) T&P including convence to reach door to door for attending thecomplaints will be provided by the contractor. (ii) Material will provided by seggregation of complaints to the contractor and will be measured & paid as supply. (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iv) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-I. (iv) If any complaint not attended by contractor with in 48 hours he will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill.
Attending complaints related to black smith work and obtaining completion from user for resecuring/easing/minor repair to make functional of steel doors, steel windows, steel rolling shutter and gates etc by greasing,oiling & cleaning and changing of required fittings, fixtures & compnents etc by employing experienced Black smith with a helper to restore the existing service to the satisfaction of Engineer-in-Charge by using store issued by the Dept..All as directed T&P for attending the job will be provided by the contractor. Note :- (i) T&P including convence to reach door to door for attending the complaints will be provided by the contractor. (ii) Material will provided by seggregation of complaints to the contractor and will be measured & paid as supply. (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iv) The area/Location of of complaints will be all MD and OTM accn in AOR of AGE B/R-I. (VI) If any complaint not attended by contractor with in 48hours contractor will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill.
Attending complaints related to Cleaning of blocked WC seat of pedestal/squatt pattern upto Ist manhole and making the drain pipe of any size full fuctional by flushing with water to entire satisfaction of engr-in charge including cleaning of 1st manhole and removing the waste material/sludge etc to a distance n. exec 300m and burning the same in pits complete all as specified and directed by Engr-in -charge. Note :- (i) T&P including convence to reach door to door for attending the complaints will be provided by the contractor. (ii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iii) The area/Location of of complaint will be all MD and OTM accn in AOR of AGE B/R-I. (iv) If any complaint not attended by contractor with in 08 hours contractor will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill.
Attending complaints related to Cleaning of blocked floor trap of bath room &kitchen etc upto 1st manhole including cleaning of gully/trap and removing the waste material/sludge etc ta a distance n. exec 300m and burring the same in pits complete all as specified and directed by Engr-in -charge. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iii) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-I. (iv) If any complaint not attended by contractor with in 12hours he will be liable for penalty/recovery of Rs.100 per complaint.Amount will be deducted from running payments/Final bill.
Dewatering of septic tank/soakage well of any depth by pump or by manual after plugging of incoming sewage lines and throwing water into non residential area or in drain/nallah complete all as specified and directed by Engineer-in-Charge.
Cleaning of septic tanks, soakage well of any depth including inlet and outlet chamber and removing sludge, silt, residue both organic and in-organic nature including any other type of waste material after plugging of incoming sewage line and removing waste material/sludge etc to a distance n.exc 300m and burrying in a pit complete all as specified and directed by Engineer-in-Charge.
Supply only Jumper brass with rubber or leather washer complete for 15 mm dia bib cock / stop cock brass all as specified.
Supply only spindle brass for 15 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern.
Supply only Capastain head / cap of CP bib tap / CP stop cock 15 mm size complete all as directed by Engr- in-charge.
Supply only Jumper brass with rubber or leather washer complete for 20 mm dia stop cock brass all as specified.
Supply only spindle brass for 20 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern.
Supply only Capastain head / cap of CP bib tap / CP stop cock 20 mm size complete all as directed by Engr- in-charge.
supply only white cement in 1 kg pack
supply only Plain sheet glass 3 mm thick of size 90X90 cement mortars
Supply only oil glass putty for glazing
Supply only PVC urinal waste pipe 40 mm
Supply only PVC waste pipe 32 mm
Supply only PVC washer for bib tap 15 mm
Supply only Rain water pipes PVC 110 mm bore
Supply only Rain water pipes PVC 75 mm bore
Supply only Clamps for rain water pipes
Supply only PVC grating 150mm
Supply only WPC Board 18mm thick.
Supply only WPC Board 6mm thick.
Supply only WPC Board 30mm thick,
Supply only wood ply 6mm thick
Supply only wood ply 10mm thick
Supply only wood ply 12mm thick
Supply only wood ply 18mm thick
Supply Only Mortice lock 75mm
Supply Only Mortice lock 100mm
Supply Only PVC Connection 600mm
Supply Only Door seal 1000mm
Supply Only Looking mirror 5.0 mm thick
Supply Only CP heavy duty hanging rod with bracket for cup board 20 mm dia
Supply Only Wall mixer 15 mm bore
Supply Only CP grating with/without hole 100 mm
Supply Only Leg for wall mix 'L' Band
Supply Only Extension piece CP 15 mm x 25mm
Supply Only CP 75 mm handles for drawers
Supply Only CP Channels for CB drawers
Cleaning of roof, chajja and similar places roof area upto 300 sqm including opening mouth of rain water pipe or spout at roof upto 15 mtr height, removing debris/waste materials/tree leaves etc to be distance exc 500m & not exc 1 km and making good the surface and filling the cracks etc with cement mortar 1:2 or PCC 1:2:4, type B-O (using 12.5 mm stone aggt) all complete as specified and directed by Engr-in-charge.
Cleaning of roof, chajja and similar places area of roof exc 300 sqm upto 600 sqm including opening mouth of rain water pipe or spout at roof upto 15 mtr height, removing debris/waste materials/tree leaves etc to be distance exc 500m & not exc 1 km and making good the surface and filling the cracks etc with cement mortar 1:2 or PCC 1:2:4, type B-O (using 12.5 mm stone aggt) all complete as specified and directed by Engr-in-charge.
Cleaning of roof, chajja and similar places area of roof exc 600 sqm and not exc 1000 sqm including opening mouth of rain water pipe or spout at roof upto 15 mtr height, removing debris/waste materials/tree leaves etc to be distance exc 500m & not exc 1 km and making good the surface and filling the cracks etc with cement mortar 1:2 or PCC 1:2:4, type B-O (using 12.5 mm stone aggt) all complete as specified and directed by Engr-in-charge.
Removal of plants/trees/shrubs from roof tops/sides, external walls of bldg, chajjas, wall junction, junctions of rain water/CI soil/Waste pipe junctions including taking out the roots entered in wall/slab surfaces and making good the disturbed surfaces using PCC (1:2:4) type B-O or cement mortar (1:2) including repairing the GI/CI/PVs pipe joints which were damaged during cutting/taking out process to match with the existing and finishing the disturbed surfaces to match with existing including necessary scaffolding/staging upto a height of 15.00 m from the ground level complete all as specified as directed.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .