SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF KITCHEN EQUIPMENT AT STATE INSTITUTE OF HOSPITALITY MANAGEMENT,KOZHIKODE, KERALA

Specifications of Items

8 Burner range ( 5 ½’l x 3’w x34” h ) ( 1650 mm x900 mm x 850 mm) Fabricated with Stainless Steel Frame Top: Made out of 304 Grade 16 SWG SS sheet, 18 SWG SS side panelling on 4 sides. Spill tray of 18 SWG SS sheet LP gas Accessories inbuilt , 4 domestic burners on either side with individual control valves and heavy duty cast iron pan support of suitable size for the burner,2 gas inlet on either side of the range at the sides with the individual control knob Legs: 40 mm dia16 SWG SS Pipe legs with adjustable Nylon bushes

Work table (4’l x2’w x34”h) ( 1200 x 600 x 850 mm) Fabricated with Stainless Steel Frame Top : Made out of 304 Grade 16 SWG SS sheet One under shelf made of 18 SWG S.S-304 sheet (6” clearance from the floor level) Legs: 40 mm dia16 SWG SS Pipe legs with adjustable Nylon bushes.

Hot Plate with griller( 4’ x 2 ½’ x 34” ) (1200 x 750 x 850mm) Made out of 40 mm SS pipe frame with 16 mm thick MS Polished plate on SS frame with two ‘V’ type LPG burners and independent control knob on side. 18 SWG SS 304 splash guard provided on three sides up to 6” height with drain board of 4” wide on rear and 3” on sides. One flame guard is required. Glass wool as insulation material in 1.6 thickness Front and rear panelling with 18 SWG SS 304. MS plate should have Grooves for Grill on right hand side of the plate. Length of the Grill 1’ 40 mm dia16 SWG SS Pipe legs with adjustable Nylon bushes

Storage Table ( 4’ x 1 ½’ x 34”) ( 1200 x 450 x 850 mm) Fabricated with Stainless Steel Frame 2shelf with sliding door and lock. Top16 SWG 304 grade SS Sheet. 18 SWG 304 grade SS Sheet Middle & Bottom sheets Three side covering with 18 SWG 304 grade SS Sheet. Front side sliding double door with locking facility. Mounted on SS Pipe legs of 40 mm dia, with floor adjustment nylon bushes

Salamander , Electric, Outer Size-36”x 20”x 16” Inner Size –30” x 17” x 12” Salamander should be 3 phase unit and is to be made out of 18/8 St. Steel AISI 304 Quality 20 SWG duly 120 grit matt polished with all resulting edges rounded with no bur or other excess material left. The unit should be electrically operated and provided with heating element of 2 KW at top in full length and width. The unit should also provide with rotary on/off switch, thermostat and indication lamps

Work Table ( 6’ x 2’ x 34”) ( 1800 x 600x 850 mm) Fabricated with Stainless Steel Frame Top is made of 16 SWG 304 grade SS Sheet. Bottom sheet is made up of 18 SWG SS (6” clearance from the floor level) Mounted on 40 mm diaSS Pipe legs with floor adjustment nylon bushes.

Sink with drain Board-1100 x600 x850 mm Sink Size : 450x400x250 mm Splash guard of 6”ht behind, made out of 16 SWG 304 grade SS Sheet Legs: 40 mm dia16 SWG SS Pipe legs with adjustable Nylon bushes

Tandoor ( Gas Operated) ( 2 ½ ’ x 2 ½ ’ x 34”) ( 750 x 750 x 850 mm) Tandoor clay Pot, with 16 SWG 304 grade SS sheet covering. All Sides insulated with non-sagging mineral Glass wool 75 mm thick, sand and glass pieces package. Provision of Lid with Handle Gas operated.

4 Burner range ( 3’ x 3’ x34”h ) ( 900 mm x900 mm x 850 mm) 2domestic burners on either side with individual gas control valve, 1 gas inlet to the unit with control knob. Fabricated with Stainless Steel Frame Top: Made out of 304 Grade 16 SWG SS sheet, 18SWG SS side panelling on 4 sides. Spill tray of 18 SWG SS sheet Legs: 40 mm dia16 SWG SS Pipe legs with adjustable Nylon bushes.

Work table (3’x3’x34”h) ( 900 x 900 x 850 mm) SS table with under shelf with 6” clearance from the floor level. Fabricated with Stainless Steel Frame Top : Made out of 304 Grade 16 SWG SS sheet One under shelf made of 18 SWG S.S-304 sheet Legs: 40 mm dia16 SWG SS Pipe legs with adjustable Nylon bushes.

Single Burner range ( 2’ x 2’ x 18”) (600 x 600 x 450mm) Made out SS frame with 16 SWG SS 304 Top, Side panel and spill tray made with 18 SWG SS 304. Mounted on SS pipe of 40 mm dia with adjustable Nylon Bushes. High Pressure burner with cast iron pan support. individual control knob.

Wall rack ( 4’ x 1 ½’ x 6’) ( 1200 x 450 x 1800 mm) SS frame, All sheets are made of 16SWG 304 grade SS Sheet. Mounted on 40 mm diaSS Pipe legs with floor adjustment nylon bushes. SS 5 tier rack- lower rack should be 6” above the floor level

Sink with drain Board- 900 x500 x850 mm Sink Size : 450x400x250 mm Splash guard of 6”ht behind, made out of 16 SWG 304 grade SS Sheet Legs: 40 mm dia 16 SWG SS Pipe legs with adjustable Nylon bushes

Hot Plate ( 4’ x 2 ½’ x 34” ) (1200 x 750 x 850mm) Made out of 40 mm SS pipe frame with 16 mm thick MS Polished plate on SS frame with two ‘V’ type LPG burners and independent control knob on side. 18 SWG SS 304 splash guard provided on three sides up to 6” height with drain board of 4” wide on rear and 3” on sides. One flame guard is provided with glass wool as insulation material in 1.6” thickness 40 mm dia16 SWG SS Pipe legs with adjustable Nylon bushes

Work table( 8’ x 3’ x 34”) (2400 x 900x 850 mm) SS table with under shelf with 6” clearance from the floor level Fabricated with Stainless Steel Frame Top : Made out of 304 Grade 16 SWG SS sheet One under shelf made of 18 SWG S.S-304 sheet Legs: 40 mm dia 16 SWG SS Pipe legs with adjustable Nylon bushes

Work table( 6’ x 3’ x 34”) (1800 x 900x 850 mm) SS table with under shelf with 6” clearance from the floor level Fabricated with Stainless Steel Frame Top : Made out of 304 Grade 16 SWG SS sheet One under shelf made of 18 SWG S.S-304 sheet Legs: 40 mmdia 16 SWG SS Pipe legs with adjustable Nylon bushes

Two Burner Range ( 4’ x 2’ x 34”) (1200 x 600x 850 mm) Made out of SS frame with 16 SWG SS 304 Top, Side panel and spill tray made with 18 SWG SS 304. Mounted on SS pipe of 40 mm dia with adjustable Nylon Bushes. High Pressure burners with cast iron pan supports. Individual control knobs. Legs 40 mm dia 16 SWG SS Pipe with adjustable Nylon bushes.

Two Burner Range ( 4’ x 2’ x 22”) (1200 x 600x 550 mm) Made out of SS frame with 16 SWG SS 304 Top, Side panel and spill tray made with 18 SWG SS 304. Mounted on SS pipe of 40 mm dia with adjustable Nylon Bushes. High Pressure burners with cast iron pan supports. Individual control knobs. Legs 40 mm dia 16 SWG SS Pipe with adjustable Nylon bushes.

Pot Rack SIZE: 5’ x 2’ x 5 ½’ ( 1500 mm x 600 mm x 1650 ) Four tier rack- Sheets made of 16 SWG 304 grade SS, Frame is fabricated with 40 mm dia SS pipe and the lower rack should have 6” floor Clearance

Wall Rack: ( 3’ x 2’ x 6’ h) ( 900 mm x 600 mm x 1800mm) SS Frame, All sheets are made of 16SWG 304 grade SS Sheet. Mounted on 40 mm dia SS Pipe legs with floor adjustment nylon bushes. SS 5 tier rack- lower rack should be 6” above the floor level

Two Burner Chinese range ( 4’ x 2’ x 34”) ( 1200 x 600 x 850 mm) Fabricated with Stainless Steel frame. Top made up of 16 SWG 304 grade SS Sheet Four side panelling is made with 18 SWG 304 grade SS Sheet. High pressure burners with individual control valves and heavy duty cast iron pan support Spill tray with 18 SWG 304 grade SS Sheet. Mounted on 40 mm SS Pipe legs with floor adjustment nylon bushes.

Wall rack ( 5’ x 1 ½’ x 6’) ( 1500 x 450 x 1800 mm) SS Frame, All sheets are made of 16SWG 304 grade SS Sheet. Mounted on 40 mm diaSS Pipe legs with floor adjustment nylon bushes. SS 5 tier rack- lower rack should be 6” above the floor level

Work Table ( 8’ x 2 ½’ x 34”) 2400 x 750x 850 mm) SS table with under shelf with 6” clearance from the floor level SS Frame Top : Made out of 304 Grade 16 SWG SS sheet One under shelf made of 18 SWG S.S-304 sheet Legs: 40 mmdia 16 SWG SS Pipe legs with adjustable Nylon bushes

Storage Table ( 4’ x 2’ x 34”) ( 1200 x 600 x 850 mm) 2shelf with sliding door and lock SS frame, Top16 SWG 304 grade SS Sheet. 18 SWG 304 grade SS Sheet Middle & Bottom sheets Three side covering with 18 SWG 304 grade SS Sheet. Front side sliding double door with locking facility. Mounted on SS Pipe legs of 40 mm diathick, with floor adjustment nylon bushes

Storage Table ( 5’ x 2’ x 34”) ( 1500 x 600 x 850 mm) 2shelf with sliding door and lock SS Frame, Top16 SWG 304 grade SS Sheet. 18 SWG 304 grade SS Sheet Middle & Bottom sheets Three side covering with 18 SWG 304 grade SS Sheet. Front side sliding double door with locking facility. Mounted on SS Pipe legs of 40 mm thick, with floor adjustment nylon bushes

Demonstration Table ( 8’ x 3’ x 34”) ( 2400 x 900x 850 mm) SS Frame with one piece of white marble top of 8’ x 3’ with under shelf of made up of 18 SWG SS with 6” clearance from the floor level Mounted on 40 mm diaSS Pipe legs with floor adjustment nylon bushes.

Cooling Rack ( 4’ x 2’ x 6’) ( 1200 x 60 x 1800 mm) SS Frame, Shelves made up of 16 SWG 304 grade SS wire/mesh

SS Dining Table with Foldable seat ( 1800 mm x 900 mm x 750 mm) Table Top made up of 16 SWG 304 grade SS Sheet. Attached and foldable sturdy SS three seats of 16 SWG on each side of the table. SS Pipe legs of 40 mmdia, with nylon bushes

SS Table ( 5’ x 2’ x 34”) (1500 x 600x 850 mm) SS table with under shelf with 6” clearance from the floor level Top : Made out of 304 Grade 16 SWG SS sheet One under shelf made of 18 SWG S.S-304 sheet Legs: 40 mm dia 16 SWG SS Pipe legs with adjustable Nylon bushes