Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹61.8 LAccepted-AOC | L1 | Accepted-AOC L1 Bidder |
| Sl No | Description | Qty | Unit | K RAMACHANDRAN L1 |
|---|---|---|---|---|
| 1.00Groove cleaning | ||||
| 1.00 | OD41207/2023-2024:Removing debris and cleaning the shutter, its grooves, sill, guide track, seal track, and roller track. | 18 | set | 2,475 ₹44,550 Lowest |
| 2.00Dismantling and Changing of rubber seals of Regulator and Lock shutters | ||||
| 2.00 | OD38145/2024-2025:Dismantling and stacking the bottom and vertical rubber seals by cutting rubber seal clamp, bolt joint ,cost includes cost of labour and hire charge of tools etc | 16 | set | 4,040.4 ₹64,646.4 Lowest |
| 2.00 | OD38153/2024-2025:Dismantling and stacking the bottom and two nos vertical rubber seals for lock shutter by cutting rubber seal clamp, bolt joint ,cost includes cost of labour and hire charge of tools etc | 2 | set | 5,004.6 ₹10,009.2 Lowest |
| 2.00 | 85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing | 201.6 | metre | 2,448.6 ₹4,93,637.76 Lowest |
| 2.00 | 85.117:Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings | 94 | metre | 3,539 ₹3,32,666 Lowest |
| 2.00 | 85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings | 72 | metre | 3,236 ₹2,32,992 Lowest |
| 3.00Overhauling of Roller assembly and Side guide | ||||
| 3.00 | OD38154/2024-2025:Clean Roller assemblies from grit, sand or any other foreign material , Grease the Roller axle to the the required amount as per the instruction of the departmental officers at site, Check Roller by hand for free rotation, Check all nuts and bolts for tightness etc complete | 72 | no | 1,411 ₹1,01,592 Lowest |
Tender Value
₹59.2 L
EMD Value
₹50,000
Closing Date
22 Jun 2026, 5:00 pmClosed
Jishakumar C B
Executive Engineer, Irrigation-Mechanical Division, Malampuzha
GENERAL- Palayivalavu SWE RCB- Kasaragod District- Preventive maintenance of 16 nos of Regulator shutters and 02 nos of Vertical Lock gates - General Mechanical Work
2026_Irrig_855165_1
IRR/MH/TR/3415/2022_16_1_1/1
Open Tender
Repair and Maintenance Works
Item Rate
365 days
Kasargod-trikaripur
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
Yes
₹50,000
Yes
1 Sept 2026
10 Jun 2026
24 Jun 2026
10 Jun 2026
22 Jun 2026
10 Jun 2026
10 Jun 2026 - 22 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Groove cleaning | |||||
| 1.001 | OD41207/2023-2024:Removing debris and cleaning the shutter, its grooves, sill, guide track, seal track, and roller track. | - | set | - | - |
| 2Dismantling and Changing of rubber seals of Regulator and Lock shutters | |||||
| 2.001 | OD38145/2024-2025:Dismantling and stacking the bottom and vertical rubber seals by cutting rubber seal clamp, bolt joint ,cost includes cost of labour and hire charge of tools etc | - | set | - | - |
| 2.002 | OD38153/2024-2025:Dismantling and stacking the bottom and two nos vertical rubber seals for lock shutter by cutting rubber seal clamp, bolt joint ,cost includes cost of labour and hire charge of tools etc | - | set | - | - |
| 2.003 | 85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing | 1 | metre | - | - |
| 2.004 | 85.117:Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings | - | metre | - | - |
| 2.005 | 85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings | - | metre | - | - |
| 3Overhauling of Roller assembly and Side guide | |||||
| 3.001 | OD38154/2024-2025:Clean Roller assemblies from grit, sand or any other foreign material , Grease the Roller axle to the the required amount as per the instruction of the departmental officers at site, Check Roller by hand for free rotation, Check all nuts and bolts for tightness etc complete | - | no | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1445274.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1445274.xls
BOQ • 0.32 MB
SBD.pdf
Tender Documents • 1.64 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .