CONSTRUCTION OF 1ST FLOOR OVER EXISTING STATION BUILDING AT DIVI TERMINAL AND REFURBISHMENTOF OFFICE BUILDING AT KADI

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: M/s GAIL (INDIA) LIMITED, VADODARA

Name of Work: CONSTRUCTION OF 1ST FLOOR OVER EXISTING STATION BUILDING AT DIVI TERMINAL AND REFURBISHMENT OF OFFICE BUILDING AT KADI

Tender No.: GAIL/BDA/CNP/HKS/25/W-33 (Tender ID: 2025_GAIL_260622_1)

Do you want to quote for this sheet ? Yes

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Brief Description Item Code / Make Estimated Qty. UoM Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Consolidate Rates SAC Code Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Total amount (including all taxes , duties & GST (INR) TOTAL TAXES It will be convert only If you choose Full Conversion, Until it will be treated as INR TOTAL AMOUNT In Words

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: M/s GAIL (INDIA) LIMITED, VADODARA

Name of Work: CONSTRUCTION OF 1ST FLOOR OVER EXISTING STATION BUILDING AT DIVI TERMINAL AND REFURBISHMENT OF OFFICE BUILDING AT KADI

Tender No.: GAIL/BDA/CNP/HKS/25/W-33 (Tender ID: 2025_GAIL_260622_1)

Do you want to quote for this sheet ? Yes

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code Quantity Units Estimated Rate (Incl GST @18%) in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Item Descriptions TOTAL AMOUNT With Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: 88 CU.MT Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

Excavation for foundationfor depth from 1.5 m to 3.0m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil +Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials. 18 CU.MT Excess(+) Full Conversion INR INR Four Thousand One Hundred & Forty Eight and Paise Ten Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 106 CU.MT Excess(+) Full Conversion INR INR Twenty Thousand Two Hundred & Fifteen and Paise Twenty Six Only 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

REINFORCED CEMENT CONCRETE 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforcement cement work; using coarse aggregate and fine aggregate derived from natural sources, Portland pozzalana / ordinary portland / Portland slag cement , admixtures in recommended proportions as per IS :9103 to accelerate / retard setting of concrete to improve durability and workablity without impairing strength ; including pumping of concrete to site of laying, curing, carraige for all leads; but excluding the cost of centering , shuttering , finishing and reinforcement as per direction of the engineer - in - charge , for the following grades of concrete. Note : Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified miminum cement contect , the contractor shall have descretion to either re - design the mix or bear the cost of extra cement. 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

All works Upto Plinth Level 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

5.33.1.1 - Concrete of M25 grade with minimum cement content of 330 kg/cum 10 CU.MT Excess(+) Full Conversion INR INR Ninety Two Thousand Four Hundred & Eighty One and Paise Twenty Only 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

All works above plinth level upto floor V level 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

5.33.2.1 - Concrete of M25 grade with minimum cement content of 330 kg/cum 40 CU.MT Excess(+) Full Conversion INR INR Three Lakh Eighty Three Thousand Seven Hundred & Sixty Six and Paise Eighty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Thermo-Mechanically Treated bars of grade Fe-500D or more. 585 KG. Excess(+) Full Conversion INR INR Sixty One Thousand Three Hundred & Eighty Nine and Paise Ninety Only

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Thermo-Mechanically Treated bars of grade Fe-500D or more. 1356 KG. Excess(+) Full Conversion INR INR One Lakh Forty Two Thousand Two Hundred & Ninety Eight and Paise Sixty Four Only

Form Work 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Centering and shuttering including strutting,propping etc. and removal of form work for: 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Foundations, footings, bases of columns, etc. for mass concrete 24 SQM Excess(+) Full Conversion INR INR Nine Thousand One Hundred & Fifty Seven and Paise Forty Four Only 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

Columns, Pillars, Piers, Abutments, Posts and Struts 67 SQM Excess(+) Full Conversion INR INR Sixty Two Thousand Six Hundred & Sixty Seven and Paise Seventy Eight Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Stairs, (excluding landings) except spiral-staircases 21 SQM Excess(+) Full Conversion INR INR Fifteen Thousand Six Hundred & Thirty and Paise Thirty Only 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

Suspended floors, roofs, landings, balconies and access platform with water proof ply 12mm thick 141 SQM Excess(+) Full Conversion INR INR One Lakh Forty One Thousand &Eighty Eight and Paise Eighty Three Only 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12mm thick 134 SQM Excess(+) Full Conversion INR INR One Lakh Nine Thousand Seven Hundred & Seventy Five and Paise Forty Eight Only 4 Construction of chamber for 100mm sluice plates item5 10 Nos

MASONARY WORK 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

6.1.2 Cement mortar 1:4 (1 cement : 4 coarse sand) 4 CU.M Excess(+) Full Conversion INR INR Twenty Eight Thousand Six Hundred & Eighty Six and Paise Fifty Six Only

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

6.4.2 Cement mortar 1:4 (1 cement : 4 coarse sand) 56 CU.M Excess(+) Full Conversion INR INR Five Lakh Nine Thousand One Hundred & Fifty Four and Paise Eighty Only

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

6.13.2 Cement mortar 1:4 (1 cement : 4 coarse sand) 16 SQ.M Excess(+) Full Conversion INR INR Seventeen Thousand Four Hundred & Ninety Five and Paise Thirty Six Only

FINISHING 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work 686 SQ.M Excess(+) Full Conversion INR INR Fifty One Thousand Eight Hundred & Forty Seven and Paise Eighty Eight Only

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90lit/10 sqm) 374 SQ.M Excess(+) Full Conversion INR INR Forty Three Thousand Three Hundred & Sixty Nine and Paise Four Only

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer , over the plaster wall surface to prepare the surface even and smooth complete. 525 SQ.M Excess(+) Full Conversion INR INR Seventy Nine Thousand Seven Hundred & Sixteen Only

WATERPROOFING 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Roof Waterproofing 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/ brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs. (c) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trovel with neat cement slurry and making pattern of 300 x 300mm square 3mm deep. (d) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. " All above operations to be done in order and as directed and specified by the Engineer-in-charge." With average thickness of 120mm and minimum thickness at Khurra as 65mm. 135 M2 Excess(+) Full Conversion INR INR Two Lakh Twenty One Thousand Two Hundred & Eighty One and Paise Twenty Only

DISMANTLING AND DEMOLISHING 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Demolishing brick work manually/by mechanical means including stacking of seviceable material and disposal of inserviceable material within 50 meters lead as per direction of Engineer - in - charge: 15.7.4 In Cement Mortar 50 CUM Excess(+) Full Conversion INR INR One Lakh Two Hundred & Twenty Eight and Paise Fifty Only

Demolishing Rcc work manually/by mechanical means including stacking of steel bar and disposal of unserviceable material within 50 meters lead as per direction of Engineer - in - charge 4 M3 Excess(+) Full Conversion INR INR Thirteen Thousand Eight Hundred & Twenty One and Paise Forty Eight Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. 1333.33 KG Excess(+) Full Conversion INR INR Seven Thousand Three Hundred & Thirty Three and Paise Thirty One Only 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 15.23.1 For thickness of tiles 10 mm to 25 mm 233.33 SQM Excess(+) Full Conversion INR INR Sixteen Thousand Six Hundred & Sixty Four and Paise Forty Three Only 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

15.28 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: 15.28.1 G.S. Sheet 133.33 SQM Excess(+) Full Conversion INR INR Twenty One Thousand Three Hundred & Ninety Nine and Paise Forty Seven Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 333.33 SQM Excess(+) Full Conversion INR INR Seventeen Thousand Seven Hundred & Twenty Three and Paise Sixteen Only 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 266.67 CUM Excess(+) Full Conversion INR INR Sixty Eight Thousand Four Hundred & Eighty Six and Paise Nineteen Only 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer in- charge 30 SQM Excess(+) Full Conversion INR INR Thirty Three Thousand Four Hundred & Eighty Six and Paise Ninety Only 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

12 mm cement plaster finished with floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

a) On Wall 525 SQ.M Excess(+) Full Conversion INR INR Two Lakh Twenty Four Thousand Three Hundred & Seventy Nine and Paise Seventy Five Only

b) On Ceiling 162 SQ.M Excess(+) Full Conversion INR INR Sixty Nine Thousand Two Hundred & Thirty Seven and Paise Eighteen Only

12 mm cement plaster of mix 1:4 (1 cement: 4 Coarse sand) 340 SQ.M Excess(+) Full Conversion INR INR One Lakh Fourteen Thousand Eight Hundred & Eleven and Paise Twenty Only

Interior Works: False Ceiling, Stones, Washroom Fittings, Tiles, Cubicles, SS Railing 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

P&F false ceiling of 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) at all height including P&F of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm entre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing rimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with ting compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and irection of the EIC but excluding the cost of painting with: P&F false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the EIC. 81 M2 Excess(+) Full Conversion INR INR One Lakh Twenty Thousand Eight Hundred & One and Paise Seventy Eight Only

With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles. 81 M2 Excess(+) Full Conversion INR INR One Lakh Forty Five Thousand Nine Hundred & Sixty Five and Paise Twenty Four Only

P&F factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight (Only plan area of chajjas shall be measured for making payment) P&F 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 20 M2 Excess(+) Full Conversion INR INR One Lakh One Thousand Three Hundred & Thirty Seven Only

Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab upto 0.50 sqm. 2 M2 Excess(+) Full Conversion INR INR Six Thousand Six Hundred & Forty Five and Paise Twenty Only

Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab over 0.50 sqm. 10 M2 Excess(+) Full Conversion INR INR Twenty Nine Thousand Nine Hundred & Fifty Two and Paise Eighty Only 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Granite of any colour and shade Area of slab upto 0.50 sqm. 2 M2 Excess(+) Full Conversion INR INR Ten Thousand Five Hundred & Thirty Four and Paise Sixty Six Only

Granite of any colour and shade Area of slab over 0.50 sqm. Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by EIC. 10 M2 Excess(+) Full Conversion INR INR Forty Nine Thousand Nine Hundred & Seventy Six and Paise Twenty Only

Interior Works: False Ceiling, Stones, Washroom Fittings, Tiles, Cubicles, SS Railing 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Marble work 20 M Excess(+) Full Conversion INR INR Five Thousand Eight Hundred & Ten and Paise Sixty Only 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

Granite work 50 M Excess(+) Full Conversion INR INR Twenty Four Thousand Eight Hundred & Fifty Seven and Paise Fifty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 20 M2 Excess(+) Full Conversion INR INR Forty Five Thousand Eight Hundred & Twenty Two and Paise Forty Only 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. 40 M2 Excess(+) Full Conversion INR INR Nineteen Thousand Seven Hundred & Twenty and Paise Eighty Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

Providing Table Float Glass panes of nominal thickness 8 mm (weight not less than 20.00 kg/sqm) 20 M2 Excess(+) Full Conversion INR INR Fifteen Thousand One Hundred & Twenty Seven and Paise Sixty Only 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

P&F white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required (W.C. pan with ISI marked white solid plastic seat and lid) 4 EA Excess(+) Full Conversion INR 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

P&F wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer 4 EA Excess(+) Full Conversion INR INR Eight Thousand Nine Hundred & Fifty Eight and Paise Forty Only 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

P&F P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White 4 EA Excess(+) Full Conversion INR INR Four Thousand Six Hundred & Thirty Four Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

P&F CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of EIC. 8 EA Excess(+) Full Conversion INR INR Eight Thousand &Fifty Four and Paise Eighty Eight Only 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

P&F Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (Kitchen sink without drain board 610x510 mm bowl depth 200 mm). 1 EA Excess(+) Full Conversion INR INR Four Thousand Eight Hundred & Seven and Paise Forty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

P&F P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete (flexible pipe 32 or 40mm dia) 5 EA Excess(+) Full Conversion INR INR Two Hundred & Fifty Nine and Paise Five Only 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

Providing Pillar Cock (Jaquar FLR 5011N or Equivalent as approved by GAIL). 5 EA Excess(+) Full Conversion INR INR Eleven Thousand Eight Hundred & Fifty Two and Paise Five Only 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

Providing Pillar Cock Auto Closing Systerm 031 (Jaquar or Equivalent as approved by GAIL). 5 EA Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

Providing Health Faucet 579 (Jaquar or Equivalent as approved by GAIL). 4 EA Excess(+) Full Conversion INR INR Six Thousand Eight Hundred & Thirty and Paise Sixty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

P&F 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 4 EA Excess(+) Full Conversion INR INR Two Thousand Six Hundred & Nine and Paise Thirty Six Only 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

Providing Con Upper Part (Jaquar FLR 5083NK or Equivalent as approved by GAIL). 4 EA Excess(+) Full Conversion INR INR Two Thousand Six Hundred & Fifty One and Paise Four Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

Providing Angle Cock (Jaquar 5053N or Equivalent as approved by GAIL). 10 EA Excess(+) Full Conversion INR INR Fifteen Thousand Eight Hundred & Seven and Paise Seventy Only 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

Providing Bib Cock 2 Way (Jaquar 5041 or Equivalent as approved by GAIL). 4 EA Excess(+) Full Conversion INR INR Eleven Thousand Eight Hundred & Eighty Seven and Paise Eighty Eight Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Providing 6x6 S S Jali Hvy. 5 EA Excess(+) Full Conversion INR INR One Thousand Three Hundred & Forty Three and Paise Forty Five Only 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

Providing Supply Pipe 24". 4 EA Excess(+) Full Conversion INR INR Eight Hundred & Ninety Five and Paise Sixty Four Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

Providing Flush Valve (Jaquar 1093N or Equivalent as approved by GAIL). 4 EA Excess(+) Full Conversion INR INR Twenty Thousand Nine Hundred & Ninety Three and Paise Thirty Two Only 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

Providing H Wash Basin integrated elegance white 10119 (Hindware, Johnson or Equivalent as approved by GAIL). 4 EA Excess(+) Full Conversion INR INR Forty Eight Thousand Four Hundred & Seventy and Paise Ninety Six Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Providing Sink Cock Table Mounted (JAQ/FLT/C.P.5357 N or Equivalent as approved by GAIL). 1 EA Excess(+) Full Conversion INR INR Three Thousand &Sixty Seven and Paise Fifty Only 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

Providing Nanhi Trap. 4 EA Excess(+) Full Conversion INR INR Nine Hundred & Fifty Five and Paise Thirty Two Only 4 Construction of chamber for 100mm sluice plates item5 10 Nos

P&F Waste coupline 6 Kamal or Equivalent as approved by GAIL. 4 EA Excess(+) Full Conversion INR INR Two Thousand Nine Hundred & Eighty Five and Paise Forty Only 4 Construction of chamber for 100mm sluice plates item5 10 Nos

P&F Control Valve H 860064 25mm or Equivalent as approved by GAIL. 2 EA Excess(+) Full Conversion INR INR Six Thousand One Hundred & Ninety Seven and Paise Seventy Only

P&F 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades, of any size as approved by EIC in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 10 M2 Excess(+) Full Conversion INR INR Twelve Thousand Three Hundred & Thirty Seven and Paise Ten Only

Providing and laying ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturer) of Ist quality conforming to Is: 15622 of approved make in all colours, shades laid on 20mm thick cement mortar 1:4 (1 cement: 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 10 M2 Excess(+) Full Conversion INR INR Ten Thousand Six Hundred & Sixty Nine and Paise Forty Only

Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption's less than 0.08% and confirming to IS 15622 of approved make in all colour and shade, laid with cement based high polymer modified quick-set tile adhesive (water based) confirming to IS : 15477, in average 6 mm thickness, including grouting the joints with white cement and matching pigments etc. complete; size of tiles 60x60 cm. 120 M2 Excess(+) Full Conversion INR INR Two Lakh One Thousand Four Hundred & Fifty One and Paise Twenty Only

P&F in position low height cabins as per details to provided during execution : Hollock wood frame 2 " X 2" both in horizontal and vertical members and covering of side along full length and height wit 12 mm thick commercial ply with lamination of 1 mm thick laminate of shade and make as approved including providing teak wood beading at top and sides including polishing and rounding of edges, all complete as directed by EIC. 10 M2 Excess(+) Full Conversion INR INR Seventy One Thousand One Hundred & Ten and Paise Fifty Only

P&F stainless steel (Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of EIC, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). P&F aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of EIC. (Glazing, paneling and dash fasteners to be paid for separately) : 20 KG Excess(+) Full Conversion INR INR Fifteen Thousand &Thirty and Paise Eighty Only

For Fixed Portion 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) For shutters of doors, windows & ventilators including P&F hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 84 KG Excess(+) Full Conversion INR INR Forty Four Thousand One Hundred & Twenty Two and Paise Sixty Eight Only

Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) P&F glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of EIC .(Cost of aluminium snap beading shall be paid in basic item): 83 KG Excess(+) Full Conversion INR INR Fifty One Thousand Nine Hundred & Sixty Four and Paise Sixty Four Only

With float glass panes of 5 to 6mm thickness (weight not less than 12.50 kg/ sqm) 16 M2 Excess(+) Full Conversion INR INR Twenty Three Thousand Four Hundred & Thirty Three and Paise Seventy Six Only

With float glass panes of 8 to 10mm thickness (weight not less than 20 kg/ sqm) 16 M2 Excess(+) Full Conversion INR INR Twenty Six Thousand Two Hundred & Thirty Eight and Paise Twenty Four Only

NON DSR ITEM 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Dismantling of the existing waterproofing from terrace inclusive of removing the debris, transporting upto 3 km lead, unloading & spreading as per directions of the EIC. 135 SQ.M Excess(+) Full Conversion INR INR Thirty Six Thousand Nine Hundred & Fifty Seven and Paise Sixty Only 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

Providing & fixing 35mm thick solid core flush door shutters and 5" x 2½" size salwood frame, in single leaf as per detailed drawing. The flush doors shall be factory made solid core block board shutters bonded with phenol formaldehyde resin. The lipping shall be of teakwood all round the flush door with a minimum thickness of 12mm. The frame shall be painted with two coats of wood primer & three coats of synthetic enamel paint of approved make & shade to the satisfaction of the architect. The shutter shall have laminate of approved make & shade (1 mm thk) on both sides). The following powder coated brass fittings shall be used: - 5" long handle on both sides - ball catch - Mortise Lock -10" long tower bolt from one side 55 SQ.M Excess(+) Full Conversion INR INR Three Lakh Ninety Thousand Eight Hundred & Sixty Nine and Paise Sixty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Total in Figures Forty Three Lakh Fifty Seven Thousand Seven Hundred & Eleven and Paise Seventy Seven Only 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: M/s GAIL (INDIA) LIMITED, VADODARA

Name of Work: CONSTRUCTION OF 1ST FLOOR OVER EXISTING STATION BUILDING AT DIVI TERMINAL AND REFURBISHMENT OF OFFICE BUILDING AT KADI

Tender No.: GAIL/BDA/CNP/HKS/25/W-33 (Tender ID: 2025_GAIL_260622_1)

Do you want to quote for this sheet ? Yes

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code Quantity Units Estimated Rate (Incl GST @18%) in Rs. Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT With Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words TOTAL AMOUNT In Words

EARTH WORK (EXECUTED WITH MANUAL LABOUR) 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: 194 M3 Excess(+) Full Conversion INR 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Excavation for foundationfor depth from 1.5 m to 3.0m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil +Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials. 129 M3 Excess(+) Full Conversion INR INR Twenty Nine Thousand Seven Hundred & Twenty Eight and Paise Five Only 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 286 M3 Excess(+) Full Conversion INR INR Fifty Four Thousand Five Hundred & Forty Three and Paise Six Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

REINFORCED CEMENT CONCRETE 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforcement cement work; using coarse aggregate and fine aggregate derived from natural sources, Portland pozzalana / ordinary portland / Portland slag cement , admixtures in recommended proportions as per IS :9103 to accelerate / retard setting of concrete to improve durability and workablity without impairing strength ; including pumping of concrete to site of laying , curing , carraige for all leads; but excluding the cost of centering , shuttering , finishing and reinforcement as per direction of the engineer - in - charge , for the following grades of concrete ;Note : Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified miminum cement contect , the contractor shall have descretion to either re - design the mix or bear the cost of extra cement. 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

All works Upto Plinth Level 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

5.33.1.1 - Concrete of M25 grade with minimum cement content of 330 kg/cum 38 CU.MT Excess(+) Full Conversion INR INR Three Lakh Fifty One Thousand Four Hundred & Twenty Eight and Paise Fifty Six Only 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

All works above plinth level upto floor V level 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

5.33.2.1 - Concrete of M25 grade with minimum cement content of 330 kg/cum 62 CU.MT Excess(+) Full Conversion INR INR Five Lakh Ninety Four Thousand Eight Hundred & Thirty Eight and Paise Fifty Four Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. 1657 KG. Excess(+) Full Conversion INR INR One Lakh Seventy Three Thousand Eight Hundred & Eighty Five and Paise Fifty Eight Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 7971 KG. Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

Form Work 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Centering and shuttering including strutting,propping etc. and removal of form work for: 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Foundations, footings, bases of columns, etc. for mass concrete 52 M2 Excess(+) Full Conversion INR INR Nineteen Thousand Eight Hundred & Forty One and Paise Twelve Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Columns, Pillars, Piers, Abutments, Posts and Struts 211 M2 Excess(+) Full Conversion INR INR One Lakh Ninety Seven Thousand Three Hundred & Fifty Six and Paise Seventy Four Only 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

Stairs, (excluding landings) except spiral-staircases 43 M2 Excess(+) Full Conversion INR INR Thirty Two Thousand &Four and Paise Ninety Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

Suspended floors, roofs, landings, balconies and access platform with water proof ply 12mm thick 158 M2 Excess(+) Full Conversion INR INR One Lakh Fifty Eight Thousand &Ninety Nine and Paise Fifty Four Only 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12mm thick 157 M2 Excess(+) Full Conversion INR INR One Lakh Twenty Eight Thousand Six Hundred & Seventeen and Paise Fifty Four Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) 50 SQ.M Excess(+) Full Conversion INR INR Eighteen Thousand Six Hundred & Ninety Six Only 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

MASONARY WORK 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.2 Cement mortar 1:4 (1 cement : 4 coarse sand) 5 M3 Excess(+) Full Conversion INR INR Thirty Five Thousand Eight Hundred & Fifty Eight and Paise Twenty Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.2 Cement mortar 1:4 (1 cement : 4 coarse sand) 74 CU.M Excess(+) Full Conversion INR INR Six Lakh Seventy Two Thousand Eight Hundred & Eleven and Paise Seventy Only 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.13.2 Cement mortar 1:4 (1 cement : 4 coarse sand) 55 SQ.M Excess(+) Full Conversion INR INR Sixty Thousand One Hundred & Forty and Paise Thirty Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

IPS FLOORING 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Cement Concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete: 11.3.1 40mm thick with 20mm nominal size stone aggregate 18 SQM Excess(+) Full Conversion INR INR Ten Thousand Seven Hundred & Fifty Seven and Paise Sixteen Only 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

PAINTING 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work 846 SQ.M Excess(+) Full Conversion INR INR Sixty Three Thousand Nine Hundred & Forty and Paise Sixty Eight Only 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer , over the plaster wall surface to prepare the surface even and smooth complete. 679 SQ.M Excess(+) Full Conversion INR INR One Lakh Three Thousand &Ninety Nine and Paise Thirty Six Only

EXTERIOR WALL WATERPROOFING 1. Surface preparation prior to waterproofing application as per detailed technical specification. 2. Providing and applying one coat of modified acrylic, water-based alkali resistant primer-cum-sealer with silicone additives of approved make (AsianPaints Samrtcare/Berger HomeShield/Nerolac Perma) as per product specification. 3. Providing and applying first coat of fiber reinforced elastomeric liquid of approved make (AsianPaints Samrtcare/Berger HomeShield/Nerolac Perma) as per product specification. 4. Providing and applying second coat of fiber reinforced elastomeric liquid of approved make (AsianPaints Samrtcare/Berger HomeShield/Nerolac Perma) as per product specification. 5. Providing and applying first coat of Acrylic smooth emulsion with silicon additives paint of approved make (AsianPaints Samrtcare/Berger HomeShield/Nerolac Perma) as per product specification. 6. Providing and applying second coat of Acrylic smooth emulsion with silicon additives paint of approved make (AsianPaints Samrtcare/Berger HomeShield/Nerolac Perma) as per product specification. 7. Providing and applying third coat of Acrylic smooth emulsion with silicon additives paint of approved make (AsianPaints Samrtcare/Berger HomeShield/Nerolac Perma) as per product specification on horizontal surfaces only. This coat must be applied on parapet walls, windows, chhajjas etc. Note: All the above-mentioned products must be of same make. E.g. Primer+ waterproofing coat +topcoat paint must be one brand. 385 SQ.M Excess(+) Full Conversion INR INR One Lakh Forty Four Thousand Three Hundred & Seventy Five Only 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/ brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs. (c) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trovel with neat cement slurry and making pattern of 300 x 300mm square 3mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. " All above operations to be done in order and as directed and specified by the Engineer-in-charge." With average thickness of 120mm and minimum thickness at Khurra as 65mm. 184 M2 Excess(+) Full Conversion INR INR Three Lakh One Thousand Five Hundred & Ninety Eight and Paise Eight Only

DISMANTLING AND DEMOLISHING 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Demolishing brick work manually/by mechanical means including stacking of seviceable material and disposal of inserviceable material within 50 meters lead as per direction of Engineer - in - charge 15.7.4 In Cement Mortar 22 CUM Excess(+) Full Conversion INR INR Forty Four Thousand One Hundred and Paise Fifty Four Only

Demolishing Rcc work manually/by mechanical means including stacking of steel bar and disposal of unserviceable material within 50 meters lead as per direction of Engineer - in - charge 4 CUM Excess(+) Full Conversion INR INR Thirteen Thousand Eight Hundred & Twenty One and Paise Forty Eight Only

FINISHING 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

12 mm cement plaster finished with floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

a) On Wall 684 SQ.M Excess(+) Full Conversion INR INR Two Lakh Ninety Two Thousand Three Hundred & Thirty Four and Paise Seventy Six Only

b) On Ceiling 210 SQ.M Excess(+) Full Conversion INR INR Eighty Nine Thousand Seven Hundred & Fifty One and Paise Ninety Only

12 mm cement plaster of mix 1:4 (1 cement: 4 Coarse sand) 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

On Wall 312 SQ.M Excess(+) Full Conversion INR INR One Lakh Five Thousand Three Hundred & Fifty Six and Paise Sixteen Only

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 50 M2 Excess(+) Full Conversion INR INR Four Hundred & Thirty Four and Paise One Hundred Only

P&F stainless steel (Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of EIC, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 50 KG Excess(+) Full Conversion INR INR Thirty Seven Thousand Five Hundred & Seventy Seven and Paise Fifty Only

P&F 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and /or alkali resisting mortar bedding and joints filled with acid and /or alkali resisting cement as per IS:4457 complete as per direction of EIC: 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) - Acid and alkali resistant tiles 30 M2 Excess(+) Full Conversion INR INR Fifty Thousand Seven Hundred & Thirty Six and Paise Sixty Only

In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile. 44 M2 Excess(+) Full Conversion INR INR Eighty Thousand Six Hundred & Ninety Six and Paise Forty Four Only

Kota stone flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab, including rubbing and polishing complete with base of cement mortar 1:4 ( 1 cement : 4 coarse sand) including skirting (if required) complete as directed by EIC -- 25 mm thick 42.4 M2 Excess(+) Full Conversion INR INR Eighty Thousand Three Hundred & Seventy Five and Paise Fifty Six Only

Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption's less than 0.08% and confirming to IS 15622 of approved make in all colour and shade, laid in 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete; size of tiles 60x60 cm. 67.29 M2 Excess(+) Full Conversion INR INR One Lakh One Thousand Seven Hundred & Eight and Paise Eighty Four Only

P&F 18mm thick or more as per instruction mirror polished, machine cut granite of any colour and shade, area of slab over 0.50 sqm for floors, kitchen platforms, vanity counters facia and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc., complete at all levels as per direction of EIC. 25 M2 Excess(+) Full Conversion INR INR One Lakh Fifteen Thousand Four Hundred & Fifty One and Paise Twenty Five Only

P&F factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight (Only plan area of chajjas shall be measured for making payment) 20 M2 Excess(+) Full Conversion INR INR One Lakh One Thousand Three Hundred & Thirty Seven Only

P&F double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of EIC. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. 100 M2 Excess(+) Full Conversion INR INR Thirty Two Thousand Nine Hundred & Eleven Only

P&F false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the EIC. 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles. 67.29 M2 Excess(+) Full Conversion INR INR One Lakh Twenty One Thousand Two Hundred & Fifty Nine and Paise Twenty Seven Only 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

P&F aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of EIC. (Glazing, paneling and dash fasteners to be paid for separately) : 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

For Fixed Portion 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) For shutters of doors, windows & ventilators including P&F hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 100 KG Excess(+) Full Conversion INR INR Fifty Two Thousand Five Hundred & Twenty Seven Only

Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) 100 KG Excess(+) Full Conversion INR INR Sixty Two Thousand Six Hundred & Eight Only

P&F glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of EIC .(Cost of aluminium snap beading shall be paid in basic item): 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

With float glass panes of 5 to 6mm thickness (weight not less than 12.50 kg/ sqm) 16 M2 Excess(+) Full Conversion INR INR Twenty Three Thousand Four Hundred & Thirty Three and Paise Seventy Six Only

With float glass panes of 8 to 10mm thickness (weight not less than 20 kg/ sqm) 16 M2 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

Fixing of (Re bars) Reinforcement bar using chemical of various diameter, using various drill upto a depth of 12 times dia of bar cleaning etc. complete as per manufacture’s specification including scaffolding. 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Rebar Fixing with FISCHER FISV 360S Chemical 8mm Dia 85 NOS Excess(+) Full Conversion INR INR Fifteen Thousand One Hundred & Twenty Four and Paise Ninety Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Rebar Fixing with FISCHER FISV 360S Chemical 10mm Dia 5 NOS Excess(+) Full Conversion INR INR One Thousand Three Hundred & Sixty Eight and Paise Eighty Only 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

Rebar Fixing with FISCHER FISV 360S Chemical 12mm Dia 76 NOS Excess(+) Full Conversion INR INR Twenty Six Thousand &Seven and Paise Twenty Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

Rebar Fixing with FISCHER FISV 360S Chemical 16mm Dia 108 NOS Excess(+) Full Conversion INR INR Sixty Six Thousand Five Hundred & Twenty Three and Paise Sixty Eight Only 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

Rebar Fixing with FISCHER FISV 360S Chemical 20mm Dia 5 NOS Excess(+) Full Conversion INR INR Five Thousand One Hundred & Thirty Three Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Rebar Fixing with FISCHER FISV 360S Chemical 25mm Dia 19 NOS Excess(+) Full Conversion INR 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Rebar Fixing with FISCHER FISV 360S Chemical 32mm Dia 5 NOS Excess(+) Full Conversion INR INR Eight Thousand Two Hundred & Twelve and Paise Eighty Only 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Providing and placing Plum concrete using 150mm to 230mm size plums (upto 30%) in the PCC including vibration, finishing, curing & roughening to surfaces wherever required; concrete conforming to grade M 10/20 (IS 456) with minimum cement content of 220 kg/M3 as per specification above raft slab & between raft beams; including centering, shuttering if required; compacting with vibrators, curing; floated steel trowelled surface wherever specified. The rate shall include for providing recesses, construction joints, PVC pipe sockets etc.to the required shape, size & slope including de-watering. 27 CU.M. Excess(+) Full Conversion INR INR Ninety Five Thousand Six Hundred & Ninety Five and Paise Twenty Nine Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

Dismantling of the existing waterproofing from terrace inclusive of removing the debris, transporting upto 3 km lead, unloading & spreading as per directions of the EIC. 181 SQ.M Excess(+) Full Conversion INR INR Forty Nine Thousand Five Hundred & Fifty and Paise Fifty Six Only 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

Providing & fixing 35mm thick solid core flush door shutters and 5" x 2½" size salwood frame, in single leaf as per detailed drawing. The flush doors shall be factory made solid core block board shutters bonded with phenol formaldehyde resin. The lipping shall be of teakwood all round the flush door with a minimum thickness of 12mm. The frame shall be painted with two coats of wood primer & three coats of synthetic enamel paint of approved make & shade to the satisfaction of the architect. The shutter shall have laminate of approved make & shade (1 mm thk) on both sides). The following powder coated brass fittings shall be used: - 5" long handle on both sides - ball catch. - Mortise Lock -10" long tower bolt from one side. 48 SQ.M Excess(+) Full Conversion INR INR Three Lakh Forty One Thousand One Hundred & Twenty Two and Paise Fifty Six Only 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Total in Figures Sixty Lakh Seventy Eight Thousand Seven Hundred & Twelve and Paise Seventy Four Only 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Please Enable Macros to View BoQ information