Construction of CGI shed at LIS

Amount

Earthwork in excavation in foundation of trenches for all kinds of soil with required depth including removal of excavated soil, dressing of bed and sides ,dewatering of trenches if any and disposal of excavated soil as directed by engineer incharge all leads. 50'x1'-6"x1'-6"=112.5cft

Providing and laying stone soiling tightly hand packed under foundation footing etc. including ramming and dressing and carriage of material from source to site of work complete in all respect 50'x0'-6"x1'-6"+10'-0"x15'-0"x0'-3"=75cft

Providing and laying in position cement concrete of grade 1:4:8(1 cement, 4 coarse sand, 8 graded stone agg/40mm nominal size crushed agg) 50'x0'-6"x1'-6"+10'x15'x0'-4"=87.45cft

Providing and laying in position cement concrete of grade 1:2:4(1 cement,2 coarse sand,4 graded stone agg/20mm nominal size crushed agg) 50'x1'-6"x0'-6"+50'x1-0"'x1'-0"=87.5cft

Providing form work of ordinary timber planking so as to give a rough finish incl. Centring, shuttering, strutting etc. including removal of same. 50x2x1'-0"=100sft

Providing and fitting of MS angle iron vertical post/horizontal, trusses, purling etc for constructing structure of the shed. The vertical posts are to be grouted 1'-6" deep in the cement concrete block. The job includes applying two coats of steel primer to the entire steel structure. All the tools and tackles are to be arranged by the firm.The size of MS posts are as : Vertical posts 50x50x6mm= 11x11'-6"[email protected]/mt=174Kgs Horizontal posts 50x50x6mm =6x10'+6x15'[email protected]/mt=207Kgs Trusses 50x50x6mm=2x4x32'+4x8'=288Rfft=87Rm @4.5kgs/mt=395kgs Perlins 50x50x6mm= 5x15'[email protected]/mt=103kgs cross brasses 40x40x5mm=18x7'=126Rft=39Rm @3kgs/mt=117kgs Gusset plates 6mm= 12x0'-6"-0'-6"=3sft=0.279Sqm@47kgs/sqm=14KGs Total=1010 Kgs+5% wastage=1060Kgs

Providing and fitting of 24 gauge(.63mm) CGI sheets on the roof and side walls of the MS shed. The job includes providing with polymer coated J and L hooks,bolts and nuts and G.I limped washers. including a cost of approved steel primer and two coats of approved paint on overlaping of sheets complete excluding the cost of purling, rafters and trusses but including the cost of cutting15'x15'+50'x10'+1/2x13'x3'-9"=750Sft=70sqm+15% overlap=80.5sqm

Providing and fitting of kit ply to the sides and roof of CGI shed (6mm thick) on the vertical and horizontal wooden pieces of size (3"x3").the cost on account of nuts, bolts nails are in the scoop of job. 50'x10'+10'x15' =650Sq ft-8’x4’ door opening= 618 Sq ft

SULTAN ENGINEERING WORKS

M/S FAFOO ENTERPRISES

M/s A. N. Engineering Works Kralpora Chadoora