Loading
Loading…
Loading…
Tender Value
₹2.5 L
EMD Value
₹3,800
Closing Date
19 May 2026, 1:00 pmClosed
SE/Civil/KTPS-VII Stage
O/o SE/Civil/KTPS-VII Stage
KTPS-VII Stage-Civil-O and M-II- B Camps- Replacement of check nuts and spindles at water pump houses in B Camps and A Camps area
698639
EPT-10/2026-27/SE/Civil/KTPS-VII Stage/Paloncha
OPEN
Civil Works
BHADRADRI KOTHAGUDEM, TELANGANA
9 documents required · 7 mandatory · 2 optional
₹89
₹3,800
4 May 2026
4 May 2026
4 May 2026
Manufacturing and supplying Stem nut or check nut for 200 mm(8") Non Rising Stem (NRS) Gate valve , fabricated from Cast iron FG200(IS210:2009), machined and threaded as per specifications.the component shall have an OD of 65mm, bore ID of 36mm and height 60mm with internal square threading(36x5 mm pitch) to suit the valve stem.Cost includes raw material, machinery charges, cutting, greasing and packing etc., Complete for finished item of the work as directed by the Engineer in charge.
Manufacturing and supplying Stem nut or check nut for 150 mm(6") Non Rising Stem (NRS) Gate valve , fabricated from Cast iron FG200(IS210:2009), machined and threaded as per specifications.the component shall have an OD of 55mm, bore ID of 30mm and height 50mm with internal square threading(30x4 mm pitch) to suit the valve stem. Cost includes raw material, machinery charges, cutting, greasing and packing etc., Complete for finished item of the work as directed by the Engineer in charge.
Repairing of Stem or Spindle of length 800mm , diameter 36mm, cut 150mm to 250mm square thread, for 200mm to 300mm Rising Stem Sluice valve(PN 1.6/PN 1)) of main water supply line of KTPS Colony , fully machined and threaded, suitable for existing pitch and gate wedge. Cost includes machinery charges for cutting, threading, facing, conveyance charges, working t&P etc., complete for finshed item of the work as directed by the department.
Manufacturing and supplying Stem or Spindle of length 725mm , diameter 32mm,cut 150mm square thread, for 200mm Rising Stem Sluice valve(PN 1.6) of main water supply line of B colony , Fabrication of Stem or spindle from Stainless steel raw material along with stem nut(located at wheel of valve) made from Bronze or Gunmetal(RG5), fully machined and threaded, suitable for existing pitch and gate wedge. Cost includes material charges for Stainless steel and Gunmetal , machinery charges for cutting threading, moulding,,conveyance charges, working t&P etc., complete for finshed item of the work as directed by the department.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ -10-2026-27- Check Nuts.xls
TENDER_DOCUMENT • 0.44 MB
EPT- 10-2026-27- Check Nuts- E tender Notice.docx
TENDER_DOCUMENT • 0.04 MB
EPT-10- Check Nuts -Specification - SE-Civil.docx
TENDER_DOCUMENT • 0.13 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .