Loading
Loading…
Loading…
Tender Value
₹2.4 Cr
EMD Value
₹4.9 L
Closing Date
12 Oct 2026, 11:00 am
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ELECT G
15 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.
In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing. Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- (i) Erection of LT or above voltage level distribution panels.(ii) Erection and commissioning of LT or above voltage level line (over head or underground).(iii) Electrification/Rewiring service building, bungalow and quarters.(iv) Supply and Erection of tower light(v) Lighting of station/Administrative building/Circulating area.
5 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderers are requested to go through the following documents which are available in upload/View Documents in Home Page of IREPS portal for works tenders before submitting the e-tender. 1. General Instruction for E-Tenders on works contract--Chapter-I 2. Special Condition-General-Chapter-II
1. I/We have visited the works site and I/We am/are aware of the site conditions. 2. We have read the tender Notice[NIT] details, Tender document along with all the conditions attached/referred to, in this tender document, and agree to abide by the said conditions. 3. We are aware of the fact that the railway reserves the right to amend the scope and value of the contract and to reject[or accept] this offer without assigning any financial liability.
The Tender document uploaded as "Tender Document.pdf" should be read in conjunction with the terms and conditions and should read and followed before quoting the tender.
Improvement of Illumination in Examination Yard/Door checking yards under DHN division
EL-21-OPEN-2026-27~ECR
EL-21-OPEN-2026-27
Open
Works - General
12 Months
Dhanbad, Jharkhand
₹0
₹4.9 L
18 Sept 2026
18 Sept 2026
28 Sept 2026
49 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,44,82,646.47 | ||
| — | 858.00 | — | — | ||
| Installation, connection, testing and Supply of LED Street Light Fitting 72W (±5%), similar to Havells model OMNIPLUS, made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07. Light source - High efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen efficacy of LED >140 lm/W. System Lumen Efficacy 110Lm/W, Electronic driver- Powered by integral, isolated electronic LED driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Over Voltage protection, Surge Voltage protection 10KV with SPD & other safety test as per IS 15885 Part-2/Sec 13. Warranty 5 years. (Make- Havells, Crompton, Bajaj, Philips). Connection to be made with PVC insulated S/core stranded alum. FRLS Conductor 2.5mm2 with PG clamp of required size (including supply) Warranty: Firm have to submit warranty certificate for five year along with the supply. All fittings should be embossed/permanent sticker with warranty details (supplier/firm's name, LOA No. & Date etc.) at the time of supply. | — | — | — | 45,74,658.66 | |
| — | 858.00 | — | — | ||
| Supply of Bend GI pipe of 30mm dia x 4ft long (to suit the street light fitting) as per site requirement and fixing the same on pole with supply of suitable clamp, nut, bolt and washer. | — | — | — | 3,12,063.18 | |
| — | 245.00 | — | — | ||
| Transportation of 2nd hand rail pole 36 feet long ,from the point of delivery to site of erection and erection of the same with cement concret founadtion ratio 1:3:6 as per drg No EL/T/5- 76 (Rail Pole will be supplied by Railway) | — | — | — | 5,48,285.5 | |
| — | 245.00 | — | — | ||
| Scrapping, cleaning & painting of rail pole with 2-coats of Red Oxide primer for entire pole then 2-coats of alum. Paint from top up to 5ft above the ground level and 2-coats of Green/Black paint up to 5ft from the ground level along with supply of paint | — | — | — | 59,169.95 | |
| — | 1448.00 | — | — | ||
| Installation, Testing, Commissioning and Supply of 60 Watt LED Flood light luminaire, 100 Lm/Watt, IP-65/66 (weather proof) complete with driver and all accessories. (Make-Havells, osram, Bajaj , Philips, Cromption) and provision of the same using suitable clamping arrangement made of 40mm X 6mm MS flat on to existing / new lamp posts in a manner so that the luminaire can be swivelled / adjusted as per the requirement or as directed by Section Engineer in charge at site | — | — | — | 43,70,006.08 | |
| — | 6192.00 | — | — | ||
| Supply and wiring to street lights/ flood light from distribution box provided in the lamp post using 3 runs of 1.5 sq. mm fire retardant Low Smoke PVC insulated single core multi stranded copper conductor of 1100 V grade confirming to IS:694/1990 or latest, in PVC flexible pipe, duly inside the tubular post in a manner as directed by Section Engineer incharge at site. Note: 3runs of 1.5 sq. mm copper conductor is taken as 1 m for unit purpose | — | — | — | 1,78,886.88 | |
| — | 1383.00 | — | — | ||
| Fabrication and Supply of tubular lamp posts made out of 2.0 mtr long (1.4 mtr above ground level) 100 mm dia "C" class (heavy duty) hot dip galvanized GI pipe and erection of the same on to pathway / floor complete, including foundation, coping/muffing, base plate of size 320mm X320mm X 10mm, suitable top cover made of 3mm thick hot dip galvanized MS sheet in a manner as directed by Section Engineer incharge. GI pipe shall conform to IS :1239 or latest | — | — | — | 61,80,958.92 | |
| — | 1628.00 | — | — | ||
| Supply of loop in - loop out box of size 280 X170 X 130mm and made of SMC (similar to"Sintex" Catalogue Reference No.GS-JB-2817) and comprising of 1 No. 6 way 32A per way strip connector block, 2Nos. of 16A Fuse base and carrier confirming to IS:2675/1983 or latest etc. duly pre-wired and provision of the same on to the lamp posts using suitable clamping arrangement made of 40mm X 6mm MS flat complete in a manner as directed by Section Engineer in charge at site. Note: Danger sticker shall be affixed on to the loop in-loop out box | — | — | — | 10,78,843.04 | |
| — | 27.00 | — | — | ||
| Supply, erection, testing and commissioning of Distribution Board, Double Door, Powder coated with locking arrangement consisting 1No, 32A DP ELCB/RCCB as incoming and 6 Nos x 6A SP MCB and 2 Nos x 20A SP MCB as outgoing Complete. Make - L&T, Havells, Legrand ,C&S (Fixing of Distribution Board to be done with proper clamping arrangement as per the site requirement (normally concealed) and connection to be done with suitable conductor including supply of PVC flexiable pipe) | — | — | — | 1,35,801.09 | |
| — | 4.00 | — | — | ||
| Supply, erection, testing and commissioning of LT Panel Outdoor type with closing double door powder coated consisting 125 A X 1 Nos for I/C and 3 x 63 A 4 Pole MCCB, 2 x 32 A 3 Pole MCB, 4X32 A DP MCB for O/G 3ph KWH meter and other accessories | — | — | — | 2,02,638.08 | |
| — | 16600.00 | — | — | ||
| Trenching, laying and back filling of XLPE cable as per Sr.DEE(G)/DHN's drg. No. EL/486-01 (cable will be supplied by the Railway) | — | — | — | 10,05,296 | |
| — | 7780.00 | — | — | ||
| Trenching, laying and back filling of XLPE cable on pucca/concrete road or concrete/tiled floor through making a trench of 6 inchs depth and 6 inches wide on the road / floor and refilling the trench with cement concrete (1:3:6) and finished to smooth surface. | — | — | — | 9,21,307.6 | |
| — | 410.00 | — | — | ||
| Cable crossing across railway track/pucca road by boring hole at depth of 01 mtr by using 01(one) nos 100mm dia GI pipe(medium grade) with accessories.GI pipe with accessories will be supplied by the contractor. | — | — | — | 7,06,434.1 | |
| — | 303.00 | — | — | ||
| Provision (Supply and erection) of Earthing station (RI-7021) as per Drg.No. ETI/ OHE/P/ 7020 or latest (The price shall cover supply and erection of an earth electrode (RI 7021) as per drawing no. ETI/OHE/P/7020. The price shall also cover the provision of a protective concrete Box with removable MS cover. The material should confirm to ACTM vol. II Part II Para 7.1.1 with figure A 3.01. The price shall cover the testing of earth value and painting the value on the earth pit. The earth electrode shall normally be of mild steel galvanized perforated pipe of not less than 44 mm nominal bore and about 3 meter length provided with a spike at one end and welded lug suitable for connecting directly Earth wire/MS flat of required size at other end. The connection of Earth wire/M S flats to each electrode shall be made through M S links by bolted joints, fasteners to be supplied by the contractor. The earth surrounding the electrode shall be chemically treated by alternate layers of fine charcoal and salt at least 150 mm all around. The item should be procured from approved supplier of CORE or RDSO, duly inspected by either RITES or Railway Representative deputed by Sr. Div. Elect.Engineer (G)/ Dhanbad.) | — | — | — | 9,72,075.51 | |
| — | 16400.00 | — | — | ||
| Providing and fixing 06 SWG / 5.0 MM dia GI wire on surface or in recess for loop earthing of street light poles, connection from earth pit to main junction board/panel, connecting different earth pits etc. Connection and Looping of earth wire to be done with suitable fasteners, nuts bolts and washer as required. | — | — | — | 1,22,836 | |
| — | 500.00 | — | — | ||
| ISI marked four core circular armoured cross linked polyethylene (XLPE) LT insulateed cable. PVC outer sheathed armoured with galvanised round steel wire or steel strip and with aluminium conducter suitable for rated voltage 1100 volts, grade conforming to IS:7098 [part-1]- 1988 with admt. no. 1,2 and 3 [reaffirmed 2005] size 4*120 sq. mm. The firm will have to submit type test report as per IS from NABl accredited lab alongwith the tender. Type test report should not be more than 10 years old on the date of bid opening. | — | — | — | 2,84,500 | |
| — | 400.00 | — | — | ||
| ISI marked four core circular armoured cross linked polyethylene (XLPE) LT insulateed cable. PVC outer sheathed armoured with galvanised round steel wire or steel strip and with aluminium conducter suitable for rated voltage 1100 volts, grade conforming to IS:7098 [part-1]- 1988 with admt. no. 1,2 and 3 [reaffirmed 2005] size 4*95 sq. mm. The firm will have to submit type test report as per IS from NABl accredited lab alongwith the tender. Type test report should not be more than 10 years old on the date of bid opening. | — | — | — | 2,01,600 | |
| — | 50.00 | — | — | ||
| Supply of GI pipe 4" dia, Medium gauge 'B' class including fixing with suitable clampnuts, bolts etc as per requirement (Make-Tata, Jindal & Bansal) | — | — | — | 29,269 | |
| — | 8.00 | — | — | ||
| (A) Supply, fixing and erection of 16Mtrs. long High Mast Tower for 09 nos. LED floodlight fittings of 160W/200W/240W suitable for wind pressure upto 180Km per hour. Materials construction: MSD IS-2002, make "BPP"/Bajaj/" comprising with following.(b) Supply, fixing and erection of mechanical components including head frame lantern carriage, ring, luminaries and C. G. Box Mfg. Arms, resting bracket, guide ring, compensating disc, lightning arrestor. (c) Supply, fixing and erection of steel ropes and nuts, bolts suitable for 16Mtrs.s. long High Mast.(d) Supply, fixing, connection and testing of control cable suitable for 9nos. LED floodlight fittings of 160W.(e) Supply and erection of foundation bolts, nuts & anchor plates etc.(f) Supply and erection of winch assembly suitable for 16-Mtrs.s. long High Mast. (g) Supply, fixing, connection and testing of power tools. (Motors, starters with control circuit board). Make: Bajaj/ BPP | — | — | — | 13,51,477.76 | |
| — | 8.00 | — | — | ||
| Casting of high mast masonry foundation with earth excavation with RCC 1:3:6 cement, sand and stone as per relevant IS foundation shall be of approximate overall size 2.7 Mtrs. (L) X 2.7 Mtrs (B) X 2.3 Mtrs. (H) including muffing of size: 0.75Mtr (L) x 0.75Mtr (B) x 1.9 Mtr (H) or as per OEM manufacturer's drawing. The course aggregate should be granite stone 20 mm for muffing and foundation along with grouting of foundation bolts complete in all respect.(Cement and all other materials will be supplied by the contractor) | — | — | — | 1,94,007.92 | |
| — | 8.00 | — | — | ||
| Supply, fixing, connection, testing and commissioning of panel board complete with contractor, timer, selector switch, voltmeter, auto & manual switch indicator lamps etc. as required. (Make: As per Bajaj/BPP} | — | — | — | 1,84,889.28 | |
| — | 72.00 | — | — | ||
| Installation, fixing, testing, commissioning & Supply o f LED floodlight of 160W +/- 10% similar to BAJAJ Make, Turbo LED floodlight series Luminare type BARFEG 160W LED ordering code 169642 with secondry optics made in pressure die cast housing and heat sink in aluminium extrusion with IP66 (Make-Havells,Bajaj,Crompton, Philips, Surya ) | — | — | — | 8,30,703.6 | |
| — | 8.00 | — | — | ||
| Supply, installation, testing & commissioning of Neon spiral aviation fixture with 25W Neon spiral lamp (02 nos. fitting in the mast). (Make: Bajaj/ Philips/Surya, C&S). | — | — | — | 31,698.32 | |
| — | 100.00 | — | — | ||
| Supply, fabrication, laying, welding and connection of GI Flat of size 25/32/40 mm x 6mm from earth pit with GI nut Bolt suitable size. | — | — | — | 5,240 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocument.pdf
ATTACHMENT
GCCApril-2022.pdf
ATTACHMENT
GCCCorrectionslip1to11_compressed.pdf
ATTACHMENT
LEDstreetlight.pdf
ATTACHMENT
LED_Indoor_lighting_specifications_EOI.pdf indoor light specification
ATTACHMENT
LED_Indoor_lighting_specifications_EOI.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .