SPECIAL REPAIRS TO BLDG NO 44, 56 AND 60 (BATHROOM AND TOILETS) AT BGTC AREA AT BARRACKPORE UNDER GE BARRACKPORE.

Amount

B/R PORTION Demolition of cement concrete (unreinforced) as in ground floors or paving n. exc 15cm thick below or above ground level complete.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing unseviceable tiles to the low lying areas of defence land stone and rubbish off the premises.

S&F for colour glazed ceramic tiles in vertical surfaces 450x300x7mm thick set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

S&F for joint free non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey cement and pigment set, jointed & pointed in neat cement slurry in floors with glossy finish over 20mm thick screed bed in CM(1:6) complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonary, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) all as specified and directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) all as specified and directed.

All as per item No. 8 but except bricks. Note: Serviceable old bricks shall be obtained from Srl Item No 6.00 here-in-before for reusing

Taking down of cement plaster incl racking out of joints, hacking for key, scrubbing down with water etc.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of concrete surfaces finished fair and smooth without without using extra cement.

M&L for 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound when necessary @ 3% weight of cement or as per manufacturer's instruction Note: WPC measured and paid separately

Supply only Liquid water proofing compound

M&L for preparation new surfaces of walls applying two coats of oil bound distemper including one coat of primer on plastered surfaces complete all as specified.

M&L for preparation of old Distempered surfaces of walls by washing, rubbing down, stopping nail holes, filling cracks with putty etc and applying two coats of oil bound distemper including one coat of primer on plastered surfaces complete all as specified.

M&L for two coats of cement base paint over one coat of primer including preparation of newly plastered surfaces complete all as specified.

M&L for two coats of cement base paint over one coat of primer including preparation of old plastered surfaces by washing, rubbing down, stopping nail holes, filling cracks with putty etc complete all as specified.

Taking down Chowkhats with shutter or frame wooden / PVC or Aluminum exc. 1.5 sqm but n.exc 4 sqm each and refixing in same opening or all as specified

Taking down Chowkhats with shutter or frame wooden / PVC or Aluminum not exc. 1.5 sqm each and refixing in same opening or all as specified.

Taking down Chowkhats with shutter of or frame exc. 1.5 sqm but n.exc 4 sqm. (without taking off shutters from the frame) removing from site all as directed.

Taking down Chowkhats or frames n.exc 1.5 sqm each but (without taking off shutters from the frame) removing from site all as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing as specified in SSR.

S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification & drawing as specified in SSR including necessary Aluminum fitting all as specified.

S&F for plain Aluminum sheeting Alloy 31000 H4 in stepped flashing 0.56 mm thick fixed with door/window or all as specified and directed by Engr-in-Charge.

Taking down shutter only exc. 1.00 sqm and n.exc 2 sqm each and removal from site.

Cutting holes into or through brick walls built in cement mortar or stone walls built in lime or cement mortar to a depth of embedded portion exc one brick but n.exc two brick for inserting hold fast etc and making good dismantled portion with cement concrete (1:2:4) type B1 all as specified.

S&F MS hold fast or Fan hook of flat iron 25mm x 6mm all as specified.

M&L preparing surfaces of steel, Treating small articles sutch as hold fast back of chowkats, etc are n.exc 0.1 sqn each

Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for.

S&F framed work such as grills, gratings, etc. with end of bars shouldered and or riveted, or forged into spikes; framed guard bars;; barred iron doors; ladders; framed work of water tanks and similar work confirming to FE.290.gde-E-165 and similar works.

M&L preparing surfaces of wood and wood based materials, steel and iron work, new or old of any description and grith not described, and treated with tar or coal tar black paint.

S&F for Amuminum anodised barrel tower bolts of extruded section and fixed 150 mm long.

S&F for Amuminum anodised barrel tower bolts of extruded section and fixed. 200 mm long.

S&F for 100 mm butt hinges medium weight cold rolled stainless steel and fixed complete.

S&F for 150mm long aluminum handles, fabricated type, anodised.

S&F in repair for aluminium alloy anodised, sliding door bolt 250 mm long with hasp staples (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolt and sliding bolt of extruded sections or cast alluminium alloy and fixed.

M&L preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.

M&L preparation of New surfaces of steel any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer all as specified.

M&L 75 mm thick cement concrete type C-2, (1:3:6) (40mm graded Aggregate) as in plinth potection or all as specified & finishing cement concrete surfaces even and smooth without using extra cement.

M&L for Cement concrete in surfaces channels and drains type C2 (1:3:6) (40 mm graded aggregate) of all as specified.

M&L forming construction joint 30mm deep x 10 mm wide filled with (1:3) sealing compound Grade 'A'

M&L providing cement concrete type C1 (1:3:6) (using 20mm graded stone aggregate) as in coping or specified.

M&L 100 mm thick cement concrete type D-2, (1:4:8) (40 mm graded aggregate) as in sub base or all as specified and directed by Engr-in-Charge.

M&L for 25 mm thick cement concrete type B-1, (1:2:4) (using 20 mm graded aggregate) as in floor/pavings etc complete all as specified by Engr-in-Charge.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples including wooden fillet fixed with wire mesh and frame.

S&F fixed for Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, antisyphonage pipe etc. complete including making good to floor.

S&F in repair PVC (SWR) 'P' trap of bore 110/110

S&F in repair PVC (SWR) 'S' trap of bore 110/110

S&F for Bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule fancy type, chromium plated 15mm dia of bore

S&F CP Grating 125 mm dia with waste hole fancy type all as specified

S&F for PVC bend 110mm dia

Cutting into existing manholes for connecting new drain making good to pipe and rendering, cutting out existing benchig for and forming branch channel (1/2 roudn or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished and reforming benching as required.

S&F fixed in repairs of PVC valveless, syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle incl 20 mm dia GI pipe brackets capacity 10 ltrs and connection to pipe complete fancy type

Taking down 100 mm bore cast iron pipes including fittings by burning out lead joints etc to facilitate dismantling old serviceable fittings/pipe laid in trenches floors or fixed to walls all as directed including earth work, demolition of PCC/Brick work and making good to match with existing surfaces

All as per Srl Item No 55.00 here-in-above 80/75 mm bore of pipe

All as per Srl Item No 55.00 here-in-above 160 mm bore of pipe

S&F PVC (SWR)100 mm bore of pipes single socketed in any length with rubber ring joints laid in trenches or in floors or fixed to walls or all as specified.

All as per Srl Item No 58 here-in-above 75 mm bore of pipe

All as per Srl Item No 58 here-in-above 160 mm bore of pipe

M&L for 15 mm GI Tubes medium grade, galvanised, with all fitting and fixed complete to walls and ceillings or laid in floors including taking up or down old tube and connections including cleaning for refixing or remove from site.

All as per Srl Item No 61 here-in-above 20 mm bore GI tubing

All as per Srl Item No 61 here-in-above 25 mm bore GI tubing

S&F in repairs stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union fancy type chromium plated and fixed, all as specified.

S&F in repairs Angle Stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union fancy type long shank and cup (concealed type) 15 mm bore and fixed, all as specified.

S&F for PVC connection 15 mm dia 450 mm long with 02 Nos brass check nuts with washer etc complete all as specified and directed.

Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning, repairing etc. measured separately) 1000 Ltr or all as specified.

Dismantling water tanks, capacity exc 500 & nexc 1000 Ltr and removing from site.

S&F rotational moulded polythylene water storage tanks(1000 Ltr) (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F in repair gun metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed of 20mm bore

S&F Ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule/PVC pipe and fixed (25 mm dia).

S&F in repair PVC (SWR) Floor trap plain with grating including jointing with solvent cement and removing old trap and making good all as specified and directed.

S&F in repairs viterous china wash basin, white or colour flat back Pedestal type including all fittings size 630 mm x 450 mm including 25 x 25 x 3mm angle iron brackets with waste pipe, including cutting for and pinning in ends of brackets or erecting stand with making good, fancy type complete all as specified.

S&F for Pillar Taps, cast copper alloy, Fancy type, chromium plated screwed, down high pressure with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipe and fixed all as specified.

S&F in repair waste fittings brass chromium plated for glazed ware basins, etc with long screwed shanks and flyuts, flange end bedded in red lead cement and other end fixed 32 mm dia.

M&L for Providing cement concrete type B0 (1:2:4) (12 mm graded aggregate) in hold fast block, lintels upto 1.5 m clear span, cills, steps: seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones bed plates, kerbs not provided for water through and the like including weathering, slightly rounded for chamfered angles and throating, as directed.

S&F fixed in repair of viterious china wash down water closet pan (pedestal pattern) white (excl fixing bolt, flushing cistern pipe) incl connection to drain (or outgoing pipe) and to flushing pipe, anti shyphonage etc with seat cover complete.

S&F in repair plastic water closet seat, back closed pattern with flat bottom and cover and CP or aluminium hinges devices.

S&F in repair health faucet chrome plated with push bottom flexible steel pipe with PVC lining of 1 mtr long suitable for 15 mm pipe fancy type.

M&L Forming jambs, etc. to openings (to foregoing items) including cutting, toothing and properly bonding into old work also facing, jointing and pointing to match existing work, complete cement mortar (1:6)

S&F PVC (SWR) bends any radius 75 mm bore with access door.

All as per item No-81 above but 110 mm bore.

S&F PVC (SWR) branch piece, single (Single Y) / (Double Y) equal or unequal 75 mm bore with access door.

All as per item No-83 above but 110 mm bore.

S&F PVC (SWR) junction single (Single T) equal or unequal 75 mm bore with access door.

All as per item No-85 above but 110 mm bore.

S&F for PVC (SWR) Vent cowl 110 mm bore.

S&F for PVC (SWR) Vent cowl 75 mm bore.

S&F Chromium plated towel ring screwed down fixing to walls with screws complete.

S&F fixed Chromium plated Towel rail 20 mm dia, D type 60 cm long between flanges of all as specified.

Demolition or Reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below or above ground floors) (Reinforcement cut as required to facilities demolition).

Form work to sides & soffits of shelves including supports over hangs etc

M&L Providing Reinforced cement concrete (1:2:4) Type B-1, (using 20 mm graded aggregate), as in shelves and the like, all as specified.

M&L TMT 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.

All as per item No-94, but 6 to 8 mm dia for stirrups.

M&L for Granite slabs (of any colour) 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade or granite stone including grinding and polishing complete.

M&L for 10mm thick rendering in cement mortar (1:4) on fair faces of concrete surfaces finished fair and smooth without using extra cement.

S&F for Vitreous china urinals, Half stall type white with grating and union for discharge pipe complete including providing and fixing plug, bedding urinal a Partition wall with plugs, bedding urinal ainst wall in cement mortor (1:2) securing urinal to plugs with and including 60 m long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets flush pipe CP Grating and Union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe fancy type all as specified.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc) sheet in roof covering.

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Taking down of Roof trusses, coupled rafters or trussed beams, for renewal of any defective members (timber renewed to be measured seperately) and reassembling upto 4 mtr all as specified and directed by Engr-in-Charge.

Housing and fixing trusses etc. after repairs including tightening up wedges, cotters bolts etc upto 4 mtr all as specified and directed.

Dismantling timber scantling 40 Sq cm and over in section unframed work, in any position complete all as specified.

M&L 2nd class hard wood clean sawn in timber scantlings timber framed and fixed to replace old and decayed timber (including piecing, scarfing, etc. of old and new timbers if required) and removing defective portions from site complete all as specified.

M&L for preparing old decorated surfaces of ceiling by brooming down or by steel wire brushing and applying two coats of white wash complete all as specified and directed.

E/M PORTION Taking down carefully copper/aluminium point wiring (light, fan, bell, socket or power) complete including fixtures and fittings such as switches, ceiling roses, holders, regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement for smooth finishing of holes, small patches etc complete all as specified and directed.

M&L for point wiring complete with 1.5 sqmm PVC insulated, FRLSH type, ISI marked, conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade (MMS) and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. flush mounting MS box with top, bottom, side/back wall knockout for conduit entry from any direction made out of 1.60 mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches, sockets, fan regulators, red colour indicator, blank plates etc as approved coloures and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed (Green colour), single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface One light point controlled by one switch complete all as specified and directed for the following:- (Note: All necessary accessories such as modular box, top cover plate, blank plate, MS box, screws, washers and all modular electrical fixtures are to be used same make/brand only and shall be deemed in to included in quoted rate only.)

All as per Srl Item No 108 here-in-above One fan point controlled by one switch and one regulator.

All as per Srl Item No 108 here-in-above One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board.

All as per Srl Item No 108 here-in-above One 5 pin 6 amps socket point controlled by one 6 amps switch on same board.

S&F modular type switch 10 amps, single pole, 1 way, 1/2 module, 240V, ISI marked complete all as spedified and directed.

S&F modular type socket shuttered type 6 amps, 2/3 pin combined 2 module, 240V, AC, ISI marked complete all as specified and directed.

S&F red color lighting indication lamp 6 amps, single pole, 240V, AC, 50 HZ suitable for 1/2 module ISI marked complete all as specified and directed.

S&F fan regulator modular type electronic, stepped type (01 to 4/5), 120 watts, 240V, AC, ISI marked complete all as specified and directed.

S&F angle lamp holder, PVC/poly carbonate type with back palte for batten fittings including LED lamp 10 watts complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/polycarbonate, isolated body ISI marked, complete all as specified and directed.

S&F decorative box type 20/22 watt light fitting, blue coloured end caps, pre-wired, and including providing PVC/Wooden round/square block-02 Nos and connected with LED fitting to ceiling rose and removing old unserviceable fitting complete all as specified and directed. Make of light fitting: Hallonix Cat No. HLCB118T8 / Crompton Model No. DMLN1LT8-16/ Havells Order code:- REGALBATTENT8UPTO1X22WSSBSWH/ JAQUAR Product code:-LUN101X120XC or equivalent in any approved make.

S&F decorative box type 9 watt light fitting, blue coloured end caps, pre-wired for single LED lamp 9 watt and including PVC/Wooden round/square block-02 Nos and connected with LED fitting to ceiling rose and including removing old unserviceable fitting complete all as specified and directed. Make:- Crompton Model No. DMLN1LT8-8 / Surya Cat Ref: SUB 118T8 or equivalent make in Philips

S&F LED T-8 tubular lamp 20/22 watt with extruded aluminium/PC body and PC diffuser complete with inbuilt LED driver complete all as specified and directed. Make: Crompton Model No. LT8-20-865-2 / Havells Code No. PHOTONULTRA1213T8SSTL20WLED865SPC / JAQUAR CAT No. LTBL01X020XC or equivalent make in Philips

S&F LED T-8 tubular lamp 9/10 watt with extruded aluminium/PC body and PC diffuser complete with inbuilt LED driver complete all as specified and directed. Make: Crompton Model No. LT8-8-865-2/ Surya Cat Ref:-SLETL-DS 9 PC reform or equivalent in any approved make.

S&F and in repair sheet metal enclosure 2 mm thick, AD/DD 240 volts AC. SPN, DB, 4 way flush mounting with 100 amps copper busbar, neutral bar, earth bar and MCB incomer, MCB SPN/DP, and MCB SP as outgoing for IP 43 & IP54 DBs protection and including making good the disturbed surfaces to match with existing surface and colour shade all as specified and as directed. Make:- Legrand Cat No. 5076 20 4Way (AD) / Hagar Cat ref No. VYS04G(AD)/ L&T at ref:-DBSPN004GD or equivalent in any approved make.

S&F MCB SP 6 to 32 amps 10 KA, "C" series, AC, 240V, 50 HZ, ISI marked complete all as specified and directed.

S&F MCB SPN 40 to 63 amps 10 KA, "C" series, AC, 240V, 50 HZ, ISI marked complete all as specified and directed.

M&L for sub main wiring complete with 2 run of 4 sqmm single core copper conductor (ISI marked) cable 1100 volts grade, FRLSH type, PVC insulated, unsheathed, flexible, multi standed colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade (MMS) with all connected accessories such as Bend, Tee, Elbow, Short pieces etc concealed in wall / roofs / floors and including one run of 4 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistrand, 1100 volts grade, FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat and applying putty including cutting and cheashing and complete all as specified and directed. (Note: Two run of 4 sqmm single core copper conductor cable and one run of 4 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

S&F and in repair aluminium busbar chamber in sheet steel enclosure of current rating capacity 100 amps, 4way, 415 volts with necessary fixing arrangements such as hole fastners/screws, bolts, nuts and wasers etc and including removing old unserviceable item from existing location and making good the disturbed surface area and complete all as specified and as directed. Make:- Havells/Standard/Indo Asian/Hagar as approved.

M&L for Earting complete with galvanised steel earth plate electode 600mm x 600mm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode upto test point or upto 7.5 mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Part-1 and GI watering pipe of 20 mm dia medium grade, GI funnel with wire mesh, including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber (1:3:6) type C1, of size 45 x 45 x 45 cm, RCC cover (1:2:4) type B1 of size 45 x 45cm and 50 mm thick including excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as slpecified and directed.

Taking down old unserviceable ceiling fan of any type/size from existing location and deposit in MES store yard and Supply and fix ceiling fan of size 1400 mm sweep, high speed, single phase, 240 volts, AC, 50HZ of approved colour and including hanging GI hook with necessary suitable MS clamps and connecting cable three core 0.45 sqmm round PVC sheathed from ceiling rose to fan connector and testing complete all as specified and directed. Make:- Standard Model No. SAILOR/ Usha model No:- Striker/ Havells model No. ES-50/ Orient model No. DELUXE (DBB) as approved

Taking down old unserviceable exhaust fan of any type/size from existing location and deposit in MES store yard for safe custody and Supply and fix metal type exhaust fan 300 mm sweep, 900 rpm, 240 volts, AC, 50HZ of approved colour and connecting of electrical connections and testing complete all as specified and directed. Make:- Standard Model- Fresh Air-DB/ Havells Model- Turbo force SP/ Usha Model- Turbo HDEF SPH as approved.

M&L for galvanized iron tubing 40 mm dia "medium grade" in any length including embedded in wall two ends duly welded MS holdfast at two ends of GI pipe and providing PCC in wall and making good distribed surfaces complete all as specified and directed. Make:-Tata/Jindal/SuryaPrakash

M&L for XLPE insulated, LT armoured heavy duty electric cable with aluminium stranded conductor 1100 volts grade, cross-sectional area 10 sqmm, 2.0 core laid in trenches/pipes/ducts/wall with necessary cable lugs and glands, nuts, bolts and washers etc and testing complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.

Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-1 and as directed. (Sand will be measured after punning down)

M&L for brick sub class 'B' 250 mm x 125 mm x 0.75 mm and laid in trenches as in protection of UG cable complete all as specified and directed.

Returning filling in soil including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

S&F GI bracket pipe of size 40 mm dia medium grade of 1.2 mtr long bent to shape hot or cold suitable for street light fitting and making one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on PCC & Steel poles/on wall surfaces and including suitable MS flat iron clamps of 30 x 6 mm thick -02 Nos suitable for fixing any place of poles with nuts, bolts & wahsers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed.

S&F LED security light fitting of capacity 70 to 75 watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. Make:- Jaquar cat No. LSRTO1S072XW/HALONIX Cat No.HLSLD-10-72-CWL-I/ Crompton cat No. LSTP-72-CDL/ Bajaj cat No. BRTFG 75W LED I as approved

JADAV CONSTRUCTION

CHANDRA CONSTRUCTION AND CO

M/S H.P Singha

BHASKAR SUPPLY AGENCY

R N CHATTERJEE

KOLAY CONSTRUCTION

JAGATRAM CONSTRUCTION

SAI ENTERPRISE