Loading
Loading…
Loading…
Tender Value
₹4.3 L
EMD Value
₹5,400
Closing Date
7 Sept 2026, 6:00 pm
AREA MANAGER (ENM) KATRAS AREA
OFFICE OF THE GENERAL MANAGER BCCL KATRAS AREA IV ENM DEPT. Post-SIJUA PIN-828121 JHARKHAND
REPAIRING OF FABRICATION OF 01 SET. MODIFIED ROTOR FAN (MODEL-PV-160) AT RAMKANALI UNDER AKWMC .
2026_BCCL_364408_1
BCCL/KA/ENM/E-TEN/2026-27/65 DATE-27.08.2026
Open Tender
Miscellaneous Works
Percentage
15 days
AKWMC KATRAS AREA IV
Please refer Tender documents.
4 documents required · 4 mandatory
₹5,400
27 Aug 2026
27 Aug 2026
8 Sept 2026
27 Aug 2026
7 Sept 2026
27 Aug 2026
27 Aug 2026 - 31 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1ITEM DESCRIPTION / HEADLING | |||||
| 1.01 | (A) FOR 01 NO. FAN BLADE MAKING 1) COST OF ALUMINUM ROUGH MATERIALS | 8 | KG | 780 | ₹6,240 |
| 1.02 | Cost of Benzoic powder (For Bounding) | 1.5 | KG | 2,250 | ₹3,375 |
| 1.03 | Cost of 02 HighSkilled x Shift | 6 | Head | 502.44 | ₹3,014.64 |
| 1.04 | Cost of Skilled x Shift | 6 | Head | 434.96 | ₹2,609.76 |
| 1.05 | Cost of Studs (25mm x 150mm) | 1 | No. | 750 | ₹750 |
| 1.06 | Cost of Check Nut | 1 | No. | 500 | ₹500 |
| 1.07 | Cost of Blade Profiling by machning | 1 | No. | 3,500 | ₹3,500 |
| 1.08 | Cost of Stud hole drilling and threading | 1 | No. | 1,500 | ₹1,500 |
| 1.9 | For 07 Nos. fan blade making Cost | 7 | No. | 21,489 | ₹1,50,423 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 2.38 MB
BOQ_377322.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].