Construction of One (01) number 100 Bedded OBC Boys Hostel and One (01) number 100 Bedded OBC Girls Hostel at Campus of National Sports University, Koutruk, Manipur

Name of Work: Construction of One (01) number100 Bedded OBC Boys Hostel and One (01) number 100 Bedded OBC Girls Hostel at Campus of National Sports

University, Koutruk, Manipur

S.No Item No. Description of work Unit Qty Rate Amount Remarks

(Including L- (Rs.)

SUB-HEAD - I : Earthwork

1 2.6 Earthwork in excavation by mechanical means (Hydraulic excavator)/Manual means over areas (exceeding 30cm in

depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead upto 50m

and lift upto 1.5m, as directed by the Engineer-in-charge.

2 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or

2.8 drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift

upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead

3 2.23 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not cum 241.94 204.60 49,500.03 MSR 22

exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto

4 2.25 Supplying and filling in plinth with sandy soil under floors including, watering,ramming consolidating and dressing cum 716.15 908.33 6,50,498.32 MSR 22

Digitally signed by DAIPAYAN

S.No Item No. Description of work Unit Qty Rate Amount Remarks

(Including L- (Rs.)

SUB-HEAD - II : PCC Work

5 Providing and laying cement concrete of specified grade excluding the cost of centering and shuttering- - All work

4.1 upto plinth level

4.1.6 1:4:8 ( 1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) cum 108.66 8,799.48 9,56,151.12 MSR 22

SUB-HEAD - III : RCC Work

6 5.1 Providing and laying in position specified grade of reinforced reinforced cement concrete, excluding the cost of

centering, shuttering, finishing and reinforcement- All work upto plinth level

6.1 5.1.1 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). cum 244.00 12,255.36 29,90,308.53 MSR 22

7 5.2 Providing and laying cement concrete in retaining walls, return walls (any thickness) including attached pilasters,

columns, piers, abutmets, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks,

anchor blocks, plain window sills, fillets etc upto floor five level, excluding the cost of centering, shuttering and

7.1 5.2.1 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) cum 86.84 13,739.64 11,93,150.55 MSR 22

8 5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies,

shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five

level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand

: 3 graded stone aggregate 20 mm nominal size).

8.1 5.3.1 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) cum 549.37 14,183.11 77,91,806.49 MSR 22

9 5.20 Reinforcement for RCC work including bending, binding and placing in position complete

9.1 5.20.1 Thermo-Mechanically Treated bars kg 74525.26 118.89 88,60,603.88 MSR 22

Digitally signed by DAIPAYAN

S.No Item No. Description of work Unit Qty Rate Amount Remarks

(Including L- (Rs.)

10 5.9 Centering and Shuttering including struting, propping etc and removal of form for.

10.1 5.9.1 Foundation, Footings, bases of Columns etc. For mass concrete sqm 296.80 466.72 1,38,522.73 MSR 22

10.2 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. sqm 594.00 927.13 5,50,712.28 MSR 22

10.3 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. sqm 2188.10 618.19 13,52,656.70 MSR 22

10.4 5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 1151.11 744.76 8,57,292.89 MSR 22

10.5 5.9.7 Stairs, (excluding landings) except spiral staircases sqm 48.96 618.52 30,282.76 MSR 22

SUB-HEAD - IV :Brick Work

11 6.1 Brick work with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in:

11.1 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 145.48 16,732.03 24,34,175.12 MSR 22

12 6.9 Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth

level upto floor V level in

12.1 6.9.2 Cement mortar 1:4 (1 cement: 4 coarse sand) cum 3046.44 2,116.26 64,47,045.17 MSR 22

SUB-HEAD - V :Wood Work

Digitally signed by DAIPAYAN

S.No Item No. Description of work Unit Qty Rate Amount Remarks

(Including L- (Rs.)

13 10.17 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. each 136.00 248.78 33,833.58 MSR 22

slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete.

14 9.27 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and each 1888.00 241.34 4,55,648.98 MSR 22

wooden plugs and embedding in cement concrete block 30x10 x 15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded

stone aggregate 20mm nominal size)

15 9.1 Providing wood work in frames of doors, windows, clerestory

windows and other frames,wrought framed and fixed in positfon with hold fast lugs or with dash fastener of required

dia and length (hold fast lugs or dash fastener Shall be paid for separately:

15.1 9.1.1 Local Best Quality Teak Wood cum 6.41 1,03,720.70 6,64,642.23 MSR 22

16 9.4 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including

ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be

paid for separately, all complete as per direction of Engineer-in-charge.

16.1 9.4.2 Local best quality Tolhao wood.

17 9.49 Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of each 104.00 984.95 1,02,434.92 MSR 22

approved quality).

18 9.43 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :

19 9.36 Providing and fixing ISI marked oxidised M.S.sliding door bolts With screws etc. complete

20 9.44 Providing and fixing bright finished brass towerbolts (barrel type) with necessary screws etc. complete:

21.00 9.51 Providing and fixing bright finished brass handles with screws etc. complete:

Digitally signed by DAIPAYAN

S.No Item No. Description of work Unit Qty Rate Amount Remarks

(Including L- (Rs.)

22 9.22 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars

priming coat with approved steel primer all complete.

22.1 9.22.2 Fixed to openings /wooden frames with rawl plugs screws etc. kg 1744.32 239.93 4,18,520.24 MSR 22

SUB-HEAD - VI :Aluminium Work

23 18.1 Providing and fixing aluminium work for doors, windows, ventilators and partitionswith extruded built up standard

tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285,

fixed with rawl plugs and screws of with fixing clips, or with expansion hold fasteners including necessary filling up

Of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections

shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleatangle,

Aluminium, snap beading for glazing / panelling, C.P. brass / stainless steelscrews, all complete as per architectural

drawings and the directions of .Engineer-incharge'. (Glazing and panelling to be paid-for separately):

23.1 18.1.1 For fixed portion

23.1.1 18.1.1.2 Anodised aluminium (anodised transparent or dyed to kg required shade according to IS: 1868, Minimum anodic kg 751.08 1,120.89 8,41,876.48 MSR 22

coating of grade AC 15)

24 18.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/pivbts and making provision for

fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be

paid for separately).

24.1 18.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic kg 996.93 1,230.89 12,27,117.62 MSR 22

coating of grade AC 15)

25 18.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM

rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .

(Cost of aluminium snap beading shall be paid in basic item):

25.1 18.2.1 With float glass panes of 4.0 mm thickness sqm 407.10 2,137.37 8,70,130.13 MSR 22

Digitally signed by DAIPAYAN

S.No Item No. Description of work Unit Qty Rate Amount Remarks

(Including L- (Rs.)

SUB-HEAD - VII :Steel Work

26 10.3 Providing and fixing in position collapsible steel shutters with vertical channels 20xl0x2mm and braced with flat sqm 6.30 11,012.86 69,381.04 MSR 22

iron diagonals;20x5mm size: with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete

with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

27 10.6 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together

through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with

brackets, side guides and arrangements for inside and outside locking with push and pull operation complete

including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of

required thickness for rolling shutters.

27.1 10.6.1 80xl.25mm M.S. laths with 1.25 mm thick top cover. sqm 6.30 5,358.50 33,758.55 MSR 22

28 10.26 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including kg 141.12 881.44 1,24,389.29 MSR 22

welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary

stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash

fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engiheer-in-charge, (for payment purpose ohly weight of stainless Steel members

shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

29 10.16 Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing

in position and applying a priming coat of approved steel primer, including welding and bolted including special

shaped washers etc. complete.

29.1 10.16.1 Hot finished,welded type tubes . kg 6429.42 208.12 13,38,117.08 MSR 22

Digitally signed by DAIPAYAN

S.No Item No. Description of work Unit Qty Rate Amount Remarks

(Including L- (Rs.)

SUB-HEAD - VIII :Roofing & Ceiling

30 12.46 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by

Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy

primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25

microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or

as desired by Engineer-in charge. The ! sheet shall be fixed using.self drilling /self tapping screws of size (5.5x 55

mm) with EPDM seal,complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins,

rafters and trusses and including cutting to size and shape wherever required with

30.1 12.4.6.2 Precoated galvanised iron profile sheets 0.40 mm thick sqm 1888.69 580.63 10,96,636.75 MSR 22

31 12.47 Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in

240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using

self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts,

G.I. plain and bitumen washers complete :

31.1 12.47.1 Ridges plain (500 - 600mm).

31.1.1 12.47.1.2 Precoated galvanised iron profile sheets 0.40 mm thick rm 98.14 440.04 43,185.17 MSR 22

32 12.47.4 Barge board (Upto 300 mm).

32.1 12.47.4.1 Precoated galvanised iron profile sheets 0.50 mm thick rm 171.60 547.91 94,020.71 MSR 22

33 12.47.6 Gutter (600 mm over all girth).

33.1 12.47.6.2 Precoated galvanised iron profile sheets 0.40 mm thick rm 196.28 870.84 1,70,927.76 MSR 22

Digitally signed by DAIPAYAN

S.No Item No. Description of work Unit Qty Rate Amount Remarks

(Including L- (Rs.)

34 12.41 Providing and fixing at all height false ceiling including providing and fixing of frame work made of special

sections, power pressed from M.S. sheet and galvanised with zinc coating of 120 gms/ sqm (both sided inclusive), as

per IS: 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at

1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm diax50mm long with 6mm dia

bolts,other flange of cleat fixed to the angle hangers Of 25x25x0.55mm of required length with nuts and bolts of

required size and the other end of the angle hanger fixed with intermediate G.I. channels 45x15x0.9mm running at

the spacing of 1200mm centre to centre; to which the ceiling section 0.5mm thick bottom wedge of 80mm with

tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre, shall be fixed in a direction

perpendicular to G.l. intermediate channel with connecting clips made out of 2.64mm diax230mm long G.l. wire at

every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm

long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre with 25mm long

drive-all screws @ 230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with

the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishng to a flush finish of

tapered and square edges of the board with recommended jointing compoundjointing tapes, finishing with jointing

compund in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board,all as per

manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts

made with frame of perimeter channels suitably fixed, all complete as per drawings, and specification and direction

of the Engineer in Charge but excluding the cost of painting with :

34.1 12.41.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I, sqm 955.32 1,265.54 12,08,993.15 MSR 22

Digitally signed by DAIPAYAN

S.No Item No. Description of work Unit Qty Rate Amount Remarks

(Including L- (Rs.)

SUB-HEAD - IX :Flooring Work

35 11.3 52 mm thick cement concrete flooring with concrete hardener topping under layer 40 mm thick cement concrete sqm 1876.85 1,003.51 18,83,435.75 MSR 22

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement

hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume

.hardening compound is mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes

cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

36 11.5 Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (1 cement : 3coarse sand) finished with a

floating coat of neat cement.

37 11.16 Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge)

over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand).laid and jointed with grey cement

slurry including rubbing and polishing complete with:

37.1 11.16.5 Udaipur green marble sqm 127.55 2,369.51 3,02,219.53 MSR 22

SUB-HEAD - X :Finishing Work

38 13.9 Cement plaster 1:3 (Tcement: 3 coarse sand) finished with a floating coat of neat cement.

39 13.8 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :

40 13.13 6mm cment plaster to ceiling 1:3 (1 Cement : 3 fine sand) sqm 2277.10 248.61 5,66,109.14 MSR 22

41 13.29 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

41.1 13.29.1 New work (two or more coats) over and including priming coat with cement primer sqm 6928.73 149.74 10,37,492.45 MSR 22

42 13.58 Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, sqm 9205.83 121.74 11,20,739.81 MSR 22

over the plastered wall surface to prepare the surface even and smooth complete.

43 13.31 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:

43.1 13.31.1 Water thinnable cement primer sqm 6928.73 61.04 4,22,957.37 MSR 22

44 13.45 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

44.1 13.45.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and sqm 6928.73 205.23 14,21,969.12 MSR 22

45 13.32 Finishing walls with water proofing cement paint of required shade :

45.1 13.32.1 New work (Two or more coats applied @ 3.84 kg/10 sqm) sqm 1053.36 96.55 1,01,699.50 MSR 22

Digitally signed by DAIPAYAN

S.No Item No. Description of work Unit Qty Rate Amount Remarks

(Including L- (Rs.)

46 13.63 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic

Compound) content.

46.1 13.63.1 With ready mixed pink primer on wood work (hard andsoft wood) having VOC content less than 50 grams/ litre sqm 246.96 62.92 15,537.52 MSR 22

SUB-HEAD - XI :Protection Work

47 4.9 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded sqm 137.57 600.74 82,642.42 MSR 22

stone aggregate 20mm nominal size).

48 4.11 Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on sqm 137.57 162.43 22,345.23 MSR 22

damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene

49 4.15 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 c: 3 c/s : 6 g/ stone aggrtgate 20 mm nominal size) sqm 137.57 939.32 1,29,219.98 MSR 22

Over 75mm bed of dry brick 40mm n/s.. rammed and consolidated and grouted with fine sand including finishing the

50 19.1 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., sqm 271.03 942.71 2,55,504.85 MSR 22

kitchen and the like consisting of : (i).1st course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing

compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and

horizontal surface. (ii) Ilnd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water

proofing compound in recommended proportion including rounding off junction of vertical and horizontal

surface.(iii) Illrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area.(iv) IVth course

of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other

with bitumen @ 1.7 Kg/sqm.)

SUB-HEAD - XII : Sanitary & Water Supply

51 16.3 Providing and fixing white vitreous, china pedestal type water closet (European type) with seat and lid, 10 litre low

level white vitreous china flushing cistern & C.P. flush bend with fittings & C.l. brackets, 40 mm flush bend,

overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design

complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever

51.1 16.3.1 W.C. pan with ISI marked white solid plastic seat and lid each 24.00 6,937.11 1,66,490.65 MSR 22

Digitally signed by DAIPAYAN

S.No Item No. Description of work Unit Qty Rate Amount Remarks

(Including L- (Rs.)

52 16.7A Providing |nd fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality

and make, including painting of fitting and brackets, cutting and making good the walls wherever required:-

52.1 16.7A.1 White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass each 32.00 6,498.41 2,07,949.08 MSR 22

53 16.90 Providing & fixing Stainless stell A ISI 304 (18/8) kitchen sink as per IS:13983 with CI brackets and stainless steel

plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required.

53.1 16.9.1 Kitchen sink with drain board.

54 16.16 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete:;

54.1 16.16.1 10 litre (full flush) capacity-white each 24.00 2,465.60 59,174.30 MSR 22

55 16.29 Providing and fixing toilet paper, holder:

56 16.34 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with

concealed fittings arrangement of approved quality and colour.

56.1 16.34.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing, not less each 16.00 671.22 10,739.55 MSR 22

57 16.28 Providing and fixing mirror of superior glass (of approved quality) and.of required shape and size with plastic

moulded frame of approved make and shade with 6 mm thick hard board backing :

57.1 16.28.4 Rectangular shape 1500x450 mm each 32.00 2,299.94 73,597.94 MSR 22

58 16.32 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of each 32.00 233.35 7,467.34 MSR 22

standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not

less than 105 gms.

59 16.26 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete,

59.1 16.26.2,2 Flexible pipe- 40mm dia each 32.00 129.79 4,153.18 MSR 22

Digitally signed by DAIPAYAN

S.No Item No. Description of work Unit Qty Rate Amount Remarks

(Including L- (Rs.)

60 17.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water

supply, including all CPVC plain s brass threaded fittings, including fixing the pipe with clamps ,at 1.00 m spacing.

This .includes jointing of pipes & fittings with one step CPVC, solvent cement and testing of joints complete as per

direction of Engineer in Charge.

60.1 Internal work-exposed on wall

60.1.1 17.4.1 15mm nominal outer dia. Pipes m 44.00 234.78 10,330.52 MSR 22

60.1.2 17.4.2 20mm nominal outer dia. Pipes m 21.00 296.16 6,219.41 MSR 22

60.1.3 17.4.4 32mm nominal outer dia. Pipes m 33.40 481.73 16,089.63 MSR 22

60.1.4 17.4.5 40mm nominal outer dia. Pipes m 21.40 642.38 13,746.94 MSR 22

60.1.5 17.4.6 50mm nominal outer dia pipes rm 55.88 926.51 51,773.12 MSR 22

61 17.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water

supply, including all CPVC plain s brass threaded fittings, including fixing the pipe with clamps ,at 1.00 m spacing.

This .includes jointing of pipes & fittings with one step CPVC, solvent cement, trenching, refilling and testing of

joints complete as per direction of Engineer in Charge.

61.1 17.6.9 External Work-100mm nominal outer dia pipes rm 63.84 2,768.19 1,76,721.50 MSR 22

62 17.7 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

62.1 17.7.1 Internal work - Exposed on wall-15 mm nominal outer dia Pipes rm 94.44 308.80 29,162.64 MSR 22

63 17.8 Providing and fixing G.l. pipes complete with G.l, fittings including trenching and refilling etc.

63.1 17.8.5 External Work-40mm dia nominal bore rm 51.52 557.17 28,705.22 MSR 22

64 17.11 Providing & fixing brass bib cock of approved quality:

65 17.17 Providing and fixing uplasticised PVC connection pipe with brass unions:

65.1 17.17.1 30 cm length

66 17.18 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:

Digitally signed by DAIPAYAN

S.No Item No. Description of work Unit Qty Rate Amount Remarks

(Including L- (Rs.)

67 17.28 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover per liter 26000.00 12.16 3,16,065.36 MSR 22

and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings

and the base support for tank.

68 17,32 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to

69 NS Supplying & fixing unplasticized PVC pipe for sewarage including jointing with seal ring , leaving 10 mm gap for

thermal expansion, (i) Single socketed pipes.

including required hire and labour charges, fittings & accessories etc. all complete, as per direction of Engineer -in-

110mm dia pipe metres 137.40 709.59 97,497.06 MR

70 NS Providing and fixing plain bend of required degree

71 NS Providing and fixing single equal plain junction of required degree :

Sub-Total (Civil, Plumbing & Sanitary items) 5,87,65,880.08 A

ELECTRICAL WORKS

INTERNAL ELECTRIFICATION

1.1 1.9 Point wiring in PVC conduit with modular type switch:-

Wiring for light point / Fan point / Exhaust Fan point / Call bell point with 1.5mm 2 FR PVC Insulated copper

conductor single core cable in surface / recessed PVC conduit with modular type switch, modular plate suitable size

G.I box and earthing the point with 1.5mm 2 FR PVC insulated copper conductor single core cable etc. as reqd.

1.2 1.15 Circuit/ Sub-Main wiring in P.V.C. steel conduit

Wiring for circuit / Sub-main wiring along with earth wire with (the following sizes) of FR PVC insulated copper

conductor single core cable in surface / recessed P.V.C. conduit etc. as reqd.

Digitally signed by DAIPAYAN

S.No Item No. Description of work Unit Qty Rate Amount Remarks

(Including L- (Rs.)

1.3 1.57.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess

including cutting the wall and making good the same in case of recessed conduit as required.

1.4 1.60 Supply and Fixing modular type switch and socket :-

Supply and Fixing ( following modular type switch/socket) on the existing modular plate and switch box i/c

connection but excluding modular plate etc. as reqd.

c) 1.60.4 3 pin 5/6 amps socket outlet each 100.00 197.36 19,736.21 MSR' 11

d) 1.60.5 6 pin 15/16 amps socket outlet each 40.00 338.95 13,557.92 MSR' 11

1.5 1.62 Supplying & Fixing stepped type electronic fan regulator on the existing modular plate switch box i/c connection but Each 152.00 701.85 1,06,681.36 MSR' 11

excluding modular plate etc. as reqd.

1.6 1.63. S/F MODULAR TYPE BLANKING PLATE Each 60.00 60.78 3,646.91 MSR' 11

S/F modular type blanking plate on existing modular plate and switch box cxcluding modular plate as reqd.

1.70 1.64. S/F MODULAR BOXES, BASE AND COVER PLATE

SIF (following size / modules, ) G.I. Box along with modular base and cover plate for modular switch in recess as

1.80 1.70 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box / wooden block i/c connection etc. as Each 220.00 56.25 12,375.65 MSR' 11

a 1.71 S/F brass batten / angle holder i/c connection etc. as reqd. Each 48.00 69.12 3,317.97 MSR' 11

Digitally signed by DAIPAYAN

S.No Item No. Description of work Unit Qty Rate Amount Remarks

(Including L- (Rs.)

1.90 1.72 S/F call bell / buzzer suitable. for DC'/AC single phase 230V complete as reqd. Each 4.00 59.35 237.41 MSR' 11

1.10 1.73 S/F brass batten / angle holder i/c connection etc. as reqd. Each 40.00 69.12 2,764.98 MSR' 11

1.11 1.77 Installation testing and commissioning of pre wired fluorescent fittings/compact fluorescent fittings of all types Each 220.00 654.30 1,43,945.60 MSR' 11

complete with all accessories and tube etc. directly on ceiling/ wall i/c connection with 1.5 sqmm FR PVC insulated

copper conductor S/core cable and earthing etc. as reqd.

1.12 1.80 Installation testing and commissioning of ceiling fan i/c wiring down rod of standard length (up to 30 cm) with Each 152.00 88.79 13,495.94 MSR' 11

1.5mm2 FR PVC insulated copper conductor single core cable etc. as qu

1.13 1.81 Installation of exhaust fan up to 450 mm sweep in the existing opening " i/c making the hole to-suit the size of the

above fan, making good the damaged, connection testing commissioning etc. as reqd.

a. Upto 450 mm sweep Each 20.00 366.60 7,331.95 MSR' 11

1.14 1.83 Extra for fixing the louvers / shutters complete with frame for a exhaust fan of all sizes etc. as reqd. Each 20.00 162.08 3,241.70 MSR' 11

1.15 414 Providing 50sqmm 4 core PVC/XLPE insulated heavy duty armonred cable 1.1 KV grade meter 1956.00 661.45 12,93,794.24 MSR' 11

1.16 6.02 Laying and fixing of 1 no. PVC insulated PVC sheathed power cable of 1.1KV grade of size not less than 25 sqmm meter 1936.00 226.80 4,39,083.91 MSR' 11

but not exceeding 120 sqmm direct in ground including excavation , sand cushioning , protective covering and re-

filling the trench etc. as reqd.

2.0 MCCB, MCB & DB's

2.1 1.88 S/F (following way) 3 pole and neutral, sheet steel, MCB distribution board 415V on surface / recessed complete

with tinned copper bus bar peutral bus bar, earth bar, din par, detachable gland plate, interconnection, phasphatized

and powder painted including earthing etc as reqd. (but

without MC /RCCB/Isantor).

a. 1.88.6 4 way (4+12 single door hoqzonm type). Each 8.00 2,350.23 18,801.84 MSR' 11

b) 1.88.8 8 way (4+24 single door hoqzonm type). Each 8.00 3,077.70 24,621.63 MSR' 11

2.2 2.10 Supplying and fixing 5 amps to 32 amps rating, 230V B series MCB for lighting and other load of (following poles)

in the existing MCB DB complete with connection testing and commissioning etc. as reqd.

2.3 2.14 S/F( following rating ) double pole 240V isolator 1n t

DB complete with connection, testing and commissioning as reqd.

Digitally signed by DAIPAYAN

S.No Item No. Description of work Unit Qty Rate Amount Remarks

(Including L- (Rs.)

3.1 3.02 Earthing with G.I. earth pipe 4.5m long 40mm dia i/c accessories and providing masonary enclosure with cover plate Set 4.00 6,531.06 26,124.26 MSR' 11

having locking arrangement and watering pipe etc. (with charcoal and salt) as reqd.

3.2 3.10 P/L carth connection from earth electrode with 8 SWG dia. GI wire in 15mm dia G.1 pipe as reqd. Metre 24.00 190.69 4,576.51 MSR' 11

3.3 5.15 P/F 8 SWG dia G.1. wire on surface or in recessed for loop earthing along with existing surface / recessed conduit Metre 150.00 24.31 3,646.91 MSR' 11

wiring /sub-main wiring / cable as reqd.

4.0 LIGHTNING CONDUCTOR

4.1 4.01 P/F copper lightning conductor finial: Each 2.00 3,646.91 7,293.82 MSR' 11

Providing & fixing of lightning conductor finial made of 25mm dia. 300 mm long copper tube having single prong at

top with 85mm dia. 3mm thick copper plate i/c holes etc. complete as reqd.

4.2 6.3 Reveting, sweating and soldering lightning conductor tape reveting, sweating and soldering of copper/G.I. tape (with Each 2.00 71.75 143.49 MSR' 11

another copper/G.I. tape base of the finial or any other metallic object as reqd.

4.3 4.07 Providing and fixing G.I. tape in horizontal run: Each 241.70 104.04 25,147.47 MSR' 11

Providing and fixing G.I. tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as reqd. (for

horizontal run)

4.4 4.08 Providing and fixing G.I. tape in vertical run: Metre 18.90 122.40 2,313.32 MSR' 11

Providing and fixing G.I. tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as reqd. (for

4.5 4.12 P/F Testing joint for G.I lightning conductor:- Each 4.00 38.26 153.03 MSR' 11

Providing, fixing and testing joint made of 20mmx3mm thick G.I strip 125mm long with 4 nos. of tinned brass bolts

nuts, check and spring washer etc. complete as erqd.

4.6 6.14 P/L G.1. earth tape for lightning conductor:- Metre 32.92 393.17 12,944.88 MSR' 11

P/L G.L tape 32mmx'6mm from earth electrode directly in ground as reqd.

5.0 8 LIGHTS FIXTURE, CEILING FANS & EXHAUST FANS

5.1 8.01 S/F 48” sweep (1200mm) A.C. ceiling fan complete with down canopy, 3 (three) blades but without regulator etc as Each 152.00 3,043.86 4,62,666.29 MSR' 11

reqd. (Make Bajaj Usha or similar )

5.2 8.06 S/F 305mm sweep exhaust fan complete with all accessories i/c connection etc as reqd. Each 20.00 4,189.06 83,781.16 MSR' 11

Digitally signed by DAIPAYAN

S.No Item No. Description of work Unit Qty Rate Amount Remarks

(Including L- (Rs.)

5.3 8.10 S/F surface / Pendent mounting FL 1x36W box type lamp channel luminaries complete with choke, starter and bulb Each 220.00 1,187.81 2,61,317.64 MSR' 11

i/c connection etc. as reqd.

5.4 8.36 S/F CFL bulk head luminaires deep down annodised Al. body, heat resistant prismatic glass cover .(Ref 021240 , Each 4.00 1,799.62 7,198.47 MSR' 11

BJBE - 19 ,S —type CFL 1 X 9w)

6.0 MDB-TYPE-III

6.1 NS Supply, installation, testing & commissioning of ACDB Buliding for Hostel Buliding on 415V, 50 Hz, 3 phase, 4 Set 2.00 79,941.93 1,59,883.86

wire, AC system.

The panel shall be indoor,Wall Mounting, Steel shall be treated for Degreasing, Derusting, Phosphating and

Passivating as per Standard Tank Process, Epoxy based Powder Coating paint, dust & vermin proof, compartment

type enclosure of IP‐42 & fabricated out of 2mm thick CRCA sheet as per manufacturer. The painting, earthing,

sign writing, numbering shall be complete with specifications & single line diagram and comprise of the following

switchgear and accessories: (Shop drawing to be got approved by the Engineer‐In‐Charge)

1 Nos 200 Amp, C -Curve, 4P,MCCB

1 No. of each Red, Yellow, Blue Indicating Lights

3 Nos 63 Amp, C-Curve, 4P MCB

3Nos 32 Amp. C-Curve,4P MCB

Digitally signed by DAIPAYAN

S.No Item No. Description of work Unit Qty Rate Amount Remarks

(Including L- (Rs.)

NON-SCHEDULE ITEMS

1 NS-1 (a) Supplying, installation, testing and commissioning of electric driven terrace pump conforming to IS 12469: 2019

suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)

(b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel

shaft, mechanical seal as required.

(c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC

supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class- 'F' insulation,

conforming to IS-12615: 2018.

(d) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.

(e) Suitable cement concrete foundation duly plastered and with anti vibration pads.

2 NS-2 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS:

3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of

required shade complete as required :

3 NS-3 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of

63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel

cap and chain as required

3.1 NS-3.1 Single headed Gunmetal set 4 6,750.51 27,002.04 MR

4 NS-4 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI

marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

5 NS-5 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312

complete with rubber gasket, GI bolts, nuts, washers etc.as required

Digitally signed by DAIPAYAN

S.No Item No. Description of work Unit Qty Rate Amount Remarks

(Including L- (Rs.)

6 NS-6 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick

stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.

7 NS-7 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound

with GI wire, rivets etc. conforming to IS 636 (type-A) as required :

7.1 NS-7.1 Stainless Steel (Grade 304) Each 8 6,127.58 49,020.64 MR

8 NS-8 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884

complete with the following as required.

(a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:12585

(b) 20 mm nominal internal dia gun metal globe valve & nozzle.

(c) Drum and brackets for fixing the equipmets on wall.

(d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

9 NS-9 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle

conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required.

9.1 NS_9.1 Stainless Steel (Grade 304) Each 8 2,430.96 19,447.70 MR

10 NS-10 Supplying & fixing of ISI marked (IS:2878) carbon-di-oxide gas type fire extinguisher with cylinder of 4.5 kg. Each 16 7,194.35 1,15,109.57 MR

capacity complete with suitable length hose and horn duly charged and ready for use GI bracket for wall mounting

etc. as required.

11 NS-11 Supplying ISI marked (IS:13849) ABC dry powder 6 kg. fire extinguisher with cylinder fully charged complete with Each 16 2,809.85 44,957.56 MR

bakelite horn discharge tube, GI bracket for wall mounting etc. as required.

12 NS-12 Supplying and Fixing of Fire Man's axe with heavy insulated rubber as per standard conforming to IS 926 Each 8 2,075.84 16,606.73 MR

13 NS-13 Supply and fixing of 9W LED bulb with nuts,washer etc. complete as required. Each 48.00 152.03 7,297.25 MR

Sub-Total (Electrical & Fire Fighting) 62,86,033.57 B

Grand Total (A+B) 6,50,51,913.64 C

Grand Total (A+B) 6,50,51,913.64 C

Digitally signed by DAIPAYAN