Civil Work

Name of Work :- Renovation Meeting Room At Taluka Panchayat Karjan

Ta. Karjan Di. Vadodara

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Qty. Unit Rates in Total

No. Description of Item Figure Amount

Civil works items

1 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 10.00 No. 187.52

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding

2 Dismentling wood work, wrought framed and fixed in frames trusses 1.38 Cu.mt 1754.44

including stacking the materials with all lead and lift.

3 Removing and scraping of old deteriorated plaster of any thickness 163.75 Sq.m. 19.41

fromm wall / R.C.C member including stacking of serviceable material

and disposal of unserviceable from site of work with all lead and lift

4 DOORS IN VENEER :- P & F 35mm flush door with 4mm veneer 3.78 Sq.m. 14342.00

design as per drawing with four side BTC patti, 4 Hinges, Lock etc.

5 Providing 15mm thick cement plaster in single coat on Rough 171.94 Sq.m. 171.21

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (ii) Cement mortar 1:4

(1-cement :4-sand)

6 Wall painting (two coats) with plastic emulsion paint ofapproved brand 172.51 Sq.m. 80.87

and manufacture on undecorated wall Surface to give an even shade

including throughly brushingthe surface free from

7 Providing and fixing eco-friendly light weight calcium silicate false 66.41 Sq.m. 1674.15

ceiling tiles having Tegular edge & 15 mm Thick Densified edges on

the Tile Periphery for Extra Strength The Light weight calcium silicate

ceiling tiles shall have , light reflection 85% non-combustible as per

B.S. 476 part IV, 100% humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium Silicate tile shall be of

approved texture Fine fissured/Spintone/Cosmos having NRC value of

0.5 & Globe having NRC value of 0.75 NRC or equivalent of size

X 595 mm to be laid on true horizontal level suspended inter locking

metal grid of hot dipped galvanized steel sections (galvanizing @120

grams per sqm including both side) consisting of main ‘T’ runner

suitably spaced at joints to get required length and size of 24X38mm

made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre,

and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet

spaced 1200mm along spaced between main ‘T’ at

600mm centre to centre to form agrid of 1200X600mm and secondary

cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick

(Minimum) sheet to be interlocked at middle of the 1200X600mm

panel to form grid of size 600X600mm resting on periphery

walls/partitions on a perimeter wall angle pre-coated steel of size

(24X24X3000mm made of 0.40mm thick (minimum) sheet with the

help of rawl plugs at 450mm centre to centre with 25mm long dry wall

screws @ 230mm interval and laying 15mm thick

Densified edges light weight calcium silicate ceiling tiles of approved

texture (Fine Fissured/Cosmos/Spintone) in the grid including,

cutting /making opening for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to

be suspended from ceiling using G.I. slotted cleats of size.

It. Qty. Unit Rates in Total

No. Description of Item Figure Amount

8 Providing and fixing window having extruded aluminum colour 4.32 Sq.m. 4260.18

anodized section frame main outer size 95mm x 24mm x 1.17mm (of

section no.2459 @ Wt. 0.738 Kg/mt), horizontal three track member

size 92mm x 31.75mm x 1.30mm (of Jindal section no. 8688, @ Wt.

9 WALL PANELING BEHIND TABLE :-P & F with framing of 2"x1" 185.04 Sq.ft 1515.00

aluminum pipe, 12mm MR grade plywood finish with 4mm veneer as

per design with polish shade complete. Etc.

10 Providing and supplying High Back Executive Revolving Ergonomic 5.00 No. 10100.00

Chair Made from SS with push back mechnism and hydraulic gas lift

of height adjustment,seat and back should be Foam Cushioned with

40 Density Foam and cover with fabric of fire retarder in all side with

Desiners head and High grade roller,size (4'ht, 3'depth) as per design.

11 CONFERENCE TABLE: Providing and Fixing Conference table as per 70.00 Rft. 2020.00

layout - 600 mm wide : Top and Legs are made from 34mm flat

laminated plywood panels 16+16 mm Calibrated BWR ply wood both

side 1mm laminated as per detailed specification. Top is coated with

epoxy solution two pack to make surface recipient fore PU lamination.

PU lamination of minimum 3mm thick in wet ultra gloss finish is

provide on surface as well as wooden edges of the top. All edges are

covered by 2 mm PVC edge bands glued by hot melt glue applied by

auto edge banding machine. . The Cable manager is provided as per

the requirements. Modesty panel: Made from 18mm flat laminated

plywood panel of 16 mm Calibrated BWR ply wood both side1mm

laminated as per detailed specification. All edges are covered by

mm PVC edge bands glued by hot melt glue applied by auto edge

banding machine. Additional cable trench below work top

admeasuring 75X75mm with entry from both ends. KD fitting: Entire

table is assembled through 8mmX45mm concealed bolt with 15mm

eccentric cranks, 8mm wooden dowels, etc. Complete drilling and

boring work is done on Multi drill machine in KD – 32 System. All

mounting holes are notched in all axis simultaneously in single

reference. Complete interchange ability is required in all parts.

12 Visiting Chair-Medium back, non-revolving, fixedbase visitor chair with 20.00 No. 3535.00

arms ,Fabricated from 2mm thick MS (Mild Steel) pipe, 40mm x 25mm

section, finished with a 40-micron thick epoxy polyester powder

13 Providing & erecting Approved make Ceiling Fan with double ball 5.00 No. 2358.35

bearing ISI mark with Condenser 230 volt A.C.50 Hz. 1200 mm sweep

complete having 4 blades Aluminium body and blade sets having

ornamental design shanks, canopy erected with earthing [ Make shall

14 Supplying and erecting approved make oscillating type bracket fan 4.00 No. 2534.09

A.C. 23OV. 50cy/s 400/450 mm sweep wall mounted with height

adjustment and rotary tilting device complete with guard, flexible Core

plug top complete erected with lead wires as directed.(Cat-II)

15 Providing and erecting approved make split airconditioning unit 1.00 No. 38820.36

consisting of copper condensing unit with fan motor, hermetically

sealed rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with its

accessories by means of extra supplied proper insulated copper

tubing,drain PVC pipes suitable for ( cost includes powder coated

Stand, Eco Friendly green gas charging, 15A plug top & Remote

Control) with necessary core cutting.(For 3 Star Rating of current year

(c) for 2 ton capacity)

It. Qty. Unit Rates in Total

No. Description of Item Figure Amount

i.e. Rs.Eight Lakh Thirty Eight Thousand Three Hundred Fourty Four Rupya And Fifty Six paisa only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items

where there is a change as per actual mix design the cost of difference of cement consumption have been

deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as

directed and to be approved from the Engineer in charge.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me

and found order.

Deputy Executive Engineer Sr. Divisional Account Executive Engineer

Panchayat (R & B) Sub Division, Officer Panchayat (R & B) Division,

Karjan Panchayat (R & B) Division, Vadodara