Construction work of Godown (5000 M.T ) in market yard at Deesa DIST : B.K

4 Excavation for foundation upto1.5

depth including.sorting out and

stacking useful material and disposing

of the excavated stuff upto 50mt lead.

(a) Loose or soft soil

S.O.R.P no.65 item code 04001A

5 Excavation for foundation upto1.5 to

3.00m depth including.sorting out and

stacking useful material and disposing

of the excavated stuff upto 50mt lead.

(a) Loose or soft soil

item code 04002A

6 Filling available excavated earth

(excluding rock) in trenches plinth

sides of foundations etc. in layers

are not exceeding 20 cm in depth

consolidating each deposited layer by

ramming watering etc comp.

S.O.R.P.No.67, It code

7 Filling in foundation & plinth with

murrum or selected soil in layers of

cm. thickness including watering

ramming and consoli-dating etc comp.

S.O.R.P.No.67 , It code 04008A

8 Filling in plinth with sand under

floorsincluding watering ramming,

consolidating and dressing etc comp.

S.O.R.P.No.67,It code 04007A

9 Applying general insecticide pest

control treatment to floors, cupboards

etc, including labour materials etc

complete.Using Heptachloride 20EC

As per 6113pests Consentration

weight 0.50 percentis recommended

one litre of water will give Total dillute

with 39 liter of water be40 liter

inclusive of one litre chemical

emulsion appication 0.5 litre

chemical/per sqm of surface is

recommended as per I.S.

S.O.R.P.No.166, It code

10 Providing and laying Cement concrete

1:3:6 (1 cement :3 coarse sand:86

machine cut black stone aggregate

40mm nominal size) and curring

comp. excluding cost of formwork in.

(a) Foundation & plinth.

item code 5003A

11 Providing and laying controlled

cement concrete M-200 and curing

complete excluding the cost of form

work and reinforced concrete work in

(a) Foundation footings Base of

columns and Mass concrete

S.O.R.P no.75 it no. 5.8.2. item code

12 Providing and laying controlled

cement concrete M-200 and curing

complete excluding the cost of form

work and reinforced concrete work in

(C) Slabs, landings, shelves,

Balconies lintels,Beams, girders and

cantilever upto floor two level

S.O.R.P no.75 it no. 5.8.2. item code

13 Providing and laying controlled

cement concrete M-200 and curing

complete excluding the cost of form

work and reinforced concrete work in

(D) columns, pillers posts and struts

upto floor two level

S.O.R.P no.75 it no. 5.8.2. item code

14 Providing formwork of ordinary

timberplanking so as to give a rough

finish including centering shutttering

strutting and propping etc. Height of

propping and centering below

supporting floor to ceiling not

exceeding 4 M and removal of the

same for in situ reinforced concrete

and plain concrete work in.IA)

Foundation footing bases of column

etc.and mass concrete

item code 09001AA

15 Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shutttering strutting

and propping etc. Height of propping

and centering below supporting floor

to ceiling not exceeding 4 M and

removal of the same for in situ

reinforced concrete and plain concrete

work in.(G) Column pillers posts and

struts.(1) Squares rectangular

polygonal in plan.

item code 09001G1a

16 Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shutttering strutting

and propping etc. Height of propping

and centering below supporting floor

to ceiling not exceeding 4 M and

removal of the same for in situ

reinforced concrete and plain concrete

work in.(C) Vertical Surface such as

walls (Any thickness) partitons and the

like including attached buttresses &

string course & the like

item code 09001C

17 Providing T.M.T Bar FE 500/500D

Reinforcement for r.c.c work incl.

bending binding and placing in

position etc comp up to floor two level.

S.O.R.P no.73 it no.5.4.11 item code

18 Brick using common burnt clay

building bricks having crushing

strength not less than 35 kg./sq.cm. in

foundation and plinth in cement mortor

1:6 (1 cement : 6 fine sand)

(B) Conventional

(S.O.R.P.no.86 it no.6.13 Item code

19 Brick using common burnt clay

building bricks having crushing

strength not less than 35 kg./sq.cm. in

Super structure in cement mortor 1:6

(1 cement : 6 fine sand)

(B) Conventional

(S.O.R.P.no.86 it no.6.13 Item code

(S.O.R.P.no.87 it no.6.19 Item code

20 Providing and fixing Rolling shutters

18 gauge of approved make made of

80mm wide M.S. laths inter-locked

together through their entire lengthv

and jointed together at the end locks

mounted on specially designed pipe

shaft with bracket plated, guide

channels and outside locking with

pushpull operation including the cost

of hood cover and spring etc.

(S.O.R P no.120 Item code

21 Providing 20mm thick double coat

malacement plaster on interior

brick/concrete work for plastering

comprising of base coat of 12mm thick

cement plasterin cement mortor (1

cement :4 coarsesand ) in rough

finishingand 8mm thick

top coat of cement mortor 1:2 (1

cement:2 coarse sand ) finished with

trovel including scafolding curing etc

S.O.R.P.No.143, It code

22 20mm th sand faced cement

plaster on wall upto ht 10mt above

ground level consisting of 12mm

th backing coat of c.m. 1:3 (1cement:

sand ) and 8mm th finishing coat ofof

c.m.1:1(1 cement :1 sand etc comp

S.O.R.P.No.142, It code 17009it

23 Providingand fixing M.S. Grill of

required pattern to wooden frame

of windows etc. with M.S. flats at

requiredspacing and frame alround

square or round bars with round

headed bolts and nuts or by screws

(S.O.R.P no. 103 It. No, 10.100 Item

24 Wall painting two coats with

plasticemulsion paints of approved

brand andmanufacture as per

engineer instruction on wall surface to

give an even brushing the surface free

frommortar dropings and other foreign

matter and sand papered smooth.

(S.O.R P no.147 it. no.18.57 Item code

25 Finishing wall with weather proof

exterior emulsion paint on wall surface

(two coat) to give an required shape

and even shade after throughly

brushing the surface to remove all dirt

and remains of loose powdered

S.O.R.P no.152 item code

26 Applying priming coat over new steel

and other metal surface after and

inclduing preparing the surface by

throughly cleaning,oil, grease, dirtand

other foreign matter and scoured with

brushes fine steel wool, scrapers and

sand paper with ready mixed printing

paint brushingred lead.

27 Painting two coats (excluding priming

coat) on new steel and other metal

surface with synthetic enamel

paint,brushing to give an even shade

incl.cleaning the surface of all dirt

dustand other foreign etc.

28 Point wiring for light/fan/bell/ Primary

point with 2-1.5 sq.mm & earthwire of

1.5 sq.mm (green) both are of isi

marked 1.1kv grade FRLS PVC

insulated multistrand copper wires, in

following type of pipe to be erected

concealed in/flushed on

wall/ceiling,complete with 6A tission

type ISi marked flush type switch /bell

push and accessories erected on

Metal / PVC box covered with 3 mm

thick PC(Polycarbonet) /Acrylic sheet.

with necessary lampholder/ceiling rose

/ H.D.Connector as directed. (a)

with medium class Rigid PVC pipe and

Electric S.O.R.(2022-23) It.no 1-1-1.

175.00 363.00 Rs/point

29 Compaction and Finishing of

cementconcrete road by trimix

processProviding extra labour charge

for the Tre-mix (Vacume) Dewatering

service process on C.C.Flooring

surface using dewater pump floater

surface vibrator including making

grooves and rough finish to surface as

per in including levelling the comp.

30 Steel work welded in built upsecetions

framed work including cutting hoisting

fixing in position and a prining coat of

(A) In beams and joist channels

angles,tees,flats with connecting

cleats as in main and cross beam ship

and jack raffers purline connected to

common raffers and the like.

No.11.4 Item code

31 Labour charge for M.S Rectangle pipe

bending work as per engineer

instruction etc comp.(R.A.)

32 Providing and fixingTATA Precoated

colour (150 GSM) Metal sheet

(0.60mm th) roof including all

accessories and necessory fittings as

per engineer instruction etc comp.

I AGREE TO DO THE ABOVE WORK

AT THE RATE OF_______________________% ABOVE / LESS

THAN THE ESTIMATED RATES WHICH ARE COATED

IN PART - 1 THE TENDER COPY.

MANSUKH N. PATEL

Consulting Engineer Contractor

Secretary Chairman

A.P.M.C. DEESA A.P.M.C. DEESA