PROVISION OF RAIN WATER DRAIN BEHIND CRYSTAL GROWTH BUILDING, ROAD SIGN BOARDS AND CONNECTED WORKS IN SSPL, REPLACEMENT OF VENETIAN BLINDS FOR MAIN BUILDING AT CFEES, INSTALLATION OF POLYCARBONATE ROOFING OF RAC BUILDING, BOLLARD LIGHT AT INMAS,

Amount

Demolition of cement concrete unreinforced in ground floors (below or above ground level) and paving not exceeding 15cm thickness including disposal of material/malba outside MoD land from 5KM upto 20KM lead at municipal dumping ground complete all as specified and directed.

Excavation in trenches in soft/loose soil, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc or for shafts, wells, drains, cesspits, manholes, pier holes, laying of LT cables etc not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out complete all as specified and directed.

Excavation in post holes (or similar holes) not exceeding 0.50 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and securing surplus soil complete all as specified and directed.

Excavation over area, not exceeding 1.50 M deep and getting out in soft/loose soil complete all as specified and directed.

Dismantling wrought iron or mild steel work including door, gates, angle post etc of any descriptions not otherwise provided complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks of class designation 7.5 (minimum compressive strength of brick 75 kg/Sqcm) old size bricks, straight or curved on plan exceeding 6 metre mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement plaster from brick or stone wall or concrete surface etc including racking out joint, hacking for key scrubing down with water complete all as specified and directed.

M&L 15mm thick rendering in CM 1:6 fair faces of new or old brick works or concrete work finished even & smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on brick work or concrete surfaces in CM 1:4 mixed with WPC as per manufacturer instruction finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately as supply only.

M&L for rough cast plaster including 15mm thick rendering in CM (1:3) on brick work or concrete surfaces complete as specified in SSR Part-I, Clause 14.22 complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers, each layer not exceeding 25 cm thick in soft/loose soil, complete all as specified and directed.

Removing excavated material/malba outside Mod land from 5KM upto 20KM lead at municipal dumping ground complete all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates,water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) in landings, cover slabs for man holes, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:6 complete all as specified and directed.

Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement concrete 1:2:4 type B-1 as required depth of embedded portion not exceeding half brick complete all as specified and directed.

S&F Framed work of angle or other section with gusset plate, rails, braces, flat iron etc as in stair case,steel doors, cages, barreled doors, cover grills, frame work for cages etc Fe 410-W (Gde-E-250) quality 'A' complete drilled for fixing of steel sheeting or other covering including welding to be prepared for hanging or sliding with and including either hooks, hinges or steel hanging door fittings and hanging also fastening and fixing and building upto 8 mtr complete all as specified and directed.

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F MS work as in framing work for wall clading, similar work etc complete all as specified and directed.

S&F MS iron angle posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed.

S&F welded steel wire fabric having weight not exc 4kg per sqm including necessary welding and riveting required to fix the mesh with frame of steel members, angle iron, flat iron etc or similar work complete all as specified and directed.

M&L for preparation of steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over 2mm thick wall care putty in two layers (each layer min 1mm thick) complete all as specified and directed.

M&L for complete removal of existing treatment including preparation of plastered or unplastered old decorated surface of walls including pillasters and cornices etc including washing, rubbing down and stopping the previously treated surfaces and applying two coat of oil emulsion distemper of approved shade/tint over and including 2mm thick wall care putty in two layers (each layer minimum 1mm thick) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls including all cornices, pilasters etc and applying two coats of acrylic exterior emulsion paint of approved tint/shade(s) over a coat of acrylic primer complete all as specified and directed.

M&L for preparation of newly plasterd surface of wall and applying two coats of cement base paint of approved shade/tint over one coat of base coat primer complete all as specified and directed.

M&L for 40mm thick plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in flooring, finished even and smooth without using extra cement complete all as specified and directed.

M&L for providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1100 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm mm x 1.6 mm complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for precast concrete coloured designer interlocking paver block any shape and size confirming to IS-15658 - 2006 of 60mm thickness M-35 grade with gray cement and pigment complete all as specified and directed.

All as per item Ser No 34.00 above but except/paver blocks. Note :- Old serviceable pavers retreived from item Ser No 33.00 shall be reused.

S&F 10-12 mm thick polycarbonate fiber glass reinforced translucent plain both side sheeting with three layer fixed with self drilling screw and washer in roof, in any shape including taking down the old sheet complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

S&F factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with CM 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment) complete all as specified and directed. Note : Kerb stone shall be approved by Engineer-in-charge.

M&L for applying two coat of synthetic enamel paint over new concrete surfaces along with preparation of surfaces of any description over 10cm width or girth with priming paints plaster coat complete all as specified and directed.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured) complete all as specified and directed.

S&F Concertina coil: 1200 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 200 GSM/Sqmm. Zine Coating on wire: Minimum 275 GSM/Sqmm (IS 6745-1972 reaffirmed 2006). Tensile Strength of wire: 1400-1500 N/Sq.mm. Weight: 14.63 Kg (+ 5%). Number of Loops: 56. Blade Length: 22 mm. Barb Profile: Medium Blade (MBBT). Distance Between Barb: 35 mm. Stretchable length: 12 mtrs, Type of clip: Hardened Steelin Galvanized steel. (Wt: 8 Kg (5 % +-) per 6 to 8 Mtr ) complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundaton, filling, mass concrete and sub floors etc complete all as specified and directed.

S&F Stainless steel (Grade 304) hollow round or square pipe of any dia /size fixed as in posts / sheds/ chair / railing and making frame structure as design approved by AGE/GE for fixing sign board with knock-down fixing system with Stainless steel 304 Grade ,channels, plates etc, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, fixing in any position with suitable arrangement as per approval of Engr-in-Charge complete all as specified and directed.

Supply, installation, hoisting and fixing in position baked hardened alloy 2mm thick aluminium composite panel as in sign boards of any size and shape as approved including necessary arrangement of stainless steel flat of suitable size all around and fixed over framed work of stainless steel complete all as specified and directed.

S&F 3M™ High Intensity Prismatic grade retro-Reflective Sheeting as base and with cut out massage (legends borders letters/numerals etc) as directed with high intensity prismatic grade retro reflective sheeting of approved colour and shade fixed on aluminium composite panel fully covered including lettered, writing information/logo with same sheeting by computerised cutting in any colour and shade. The following specification for sign board to be used:- (i) Paper used for printing should be 170 GSM 3M Reflective Vinyl. (ii) Printing of letter with Mutoh Eco Solvent. (iii) Base of Material should be used should be 3mm Alcabond Make : 3M AVERY, DENNYSON and equivalent Note:- Aluminium composite panel shall be measured and paid for separately.

S&F factory made chequered cement concrete coloured tiles 200mm X 200mm X 25mm thick, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and including 20mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8, type D-2 (40mm graded stone aggregate) as in sub base concrete complete all as specified and directed.

S&F in repair for convex mirror for size 800mm to 1000mm made of PC material provided with suitable corrosion free MS pipes 75mm dia with necessary fixing arrangement including fix the mirror at necessary height as per site requirement , meant for road turning, intersections, curves, 'T' junctions, parking lots etc. ideal for surveillance, have clear and definite mirror image, having 130 degree of viewing angle complete all as specified and directed. Make:- Dark eye, Road star or equivalent as approved by GE.

S&F in repair vertical venetian blinds consisting of aluminium head rail with vanes/louvers/flip cover 100 mm wide of approved tint/shade and traverse coard complete fixed in position complete all as specified and directed.

S&F in repair double rolling vertical venetian blinds consisting of aluminium head rail with flip cover of approved tint/shade and traverse coard complete as per manufacturer instruction fixed in position complete all as specified and directed.

M&L for LED backlit and glow sign board of size approx 20ft x 3ft having backlit stainless steel (grade 304) 3D Letters in different fonts and sizes with Stylish Designs and Superior Polish of any color, illuminated with fabricated backlit letters fitted with LED module having energy-efficient IP65 LED lights of desired color mounted to the back of each SS letter allowing lights to glow around each SS letter providing a “halo” effect of 3D SS letters appearing “floating” on the board .The fabricated backLit letters behind SS letters are produced with a translucent acrylic material fitted with inbuilt IP65 LED lights of desired color and mounted on a backlit lightbox as base assembly made up of aluminum composite panel fitted with ibuilt IP65 LED tube/LED strips as suitable including all necessary wiring complete mounting of entire bord assembly on exterior vertical surface at suitable height complete all as specified and directed. Note:- Contractor is advised to visit the AGE B/R office for sample and should quote the rate accordingly.

M&L for point wiring with two run of 1.50 Sqmm FRLS single core multi stranded copper conductor PVC insulated and unsheathed wire and one run of 1.50 Sqmm copper conductor as earth continuity for one Light/Fan/Exhaust fan/call bell point controlled by one switch, passing through and including medium grade PVC concealed/surface conduit with all accessories and to be terminated in pressed GI sunken box suitable for fixing modular switch and sockets etc including making good the disturbed surface including white/color wash to match with the existing complete all as specified and directed.

M&L for point wiring with two run of 4.0 Sqmm FRLS single core multi stranded copper conductor PVC insulated and unsheather wire and one run of 4.0 Sqmm copper conductor as earth continuity for one 15/16 Amps power socket out let point passing through and including medium grade PVC concealed/surface conduit with all accessories and to be terminated in pressed GE sunken box suitable for fixing modular switch and sockets etc including making good the disturbed surface including white/color wash to match with the existing complete all as specified and directed.

S&F Modular switch 6 Amps one way 230 volts 50 Hzs one module complete all as specified and directed.

S&F modular switch single pole one way 16 Amps 1 module complete all as specified and directed

M&L of modular socket 6 A/16 amp -2/3 pin combined 2 module complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with onesingle pole MCB 20 Amps including taking down old unserviceable single pole & neutral enclosure complete all as specified and directed.

S&F distribution board double door vertical type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, suitable for MCCB of capacity 125 Amps, 16 KA as incommer 8 way 415 volts with 200 Amps rated busbar adjustable thermal 70% to 100%) and fixed magnetic setting type complete all as specified and directed.

S&F MCB SP 6-32 amp rating 240V, 10KA 'C' curve in the MCB DB complete with connection and testing complete all as specified and directed.

S&F MCCB four pole 415 volts 50 Hzs 100 Amps with 25KA repturing capacity with MS powder coated suitable size box complete all as specified and directed.

Supply and fix MCCB four pole 415 volts 50 Hzs 125 Amps with 35KA repturing capacity complete all as specified and directed.

S&F MCB TP&N 100 Amps 415 volts 50 Hz complete with 4 way enclosure without bus bar complete all as specified and directed.

M&L for wiring of circuit/submain wiring alongwith earth wire of FR PVC insulated copper conductor, single core cable of size 4X25 Sqmm + 2X25 Sqmm earth wire including suitable size of concealed PVC conduit and lugs/thimble with nuts,bollts and washers etc complete, including cutting chases for conduit and sinkings for boxes and making good to wall and floor/ceiling complete all as specified and directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor of suitable size complete all as specified and directed.

Material and Labour for earthing complete with iron earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron strip of 32x6 mm by means of Copper nuts, bolts and washers. Strip laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following complete all as specified and shown in electrical plate No 3 of SSR Part-I & testing on completion :- (a) GI strip of size 32mm x 6mm. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel bar 75mm centre to centre with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover.

S&F Earth continuity conductor or main earthing lead fixed to wall or batten or chases or burried in ground or any other indicated situation for loop earthing as required GI Strip 32x6 mm complete all as specified and directed.

Supply and laying in trench/fixing on wall/floor/ceiling as directed cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 Sqmm 3.5 core complete including connection with suitable size lugs complete all as specified and directed.

Supply and laying XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 16 Sqmm 4 Core and testing complete all as specified and directed.

S&F bollard light cone series act as an imposing street furniture a silient observed, diffuser at the upper portion adds functional value with IP-65 with in built 8 watt LED 1 M height and connected all fixing accessories such as nuts bolts etc complete all as specified and directed.

Supply and laying dry fine sand for cushioning of underground cable laid in trenches/duct complete all as specified and directed. Note:- Punned thickness shall be measurement & paid.

Supply and laying in treanches burnt brick sub class 'B' standard size for cable protection keeping width of the brick parallel to the length of the cable complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) for sub base of pole/bollard light complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) for coping/finished surface etc of pole/bollard light complete all as specified and directed.

S&F PVC pipe of size 25 mm dia medium grade including all connected accessories complete all as specified and directed.

S&F of electrolyte grade copper tubing of following size suitable for any type of split type AC including synthetic rubber foam complete all as specified and directed. Note : - The quoted rate is inclusive of necessary T&P, Rope, Ladder etc with safety equipment for execution the work upto six storey building.

Copper pipe 1/4" dia

Copper pipe 1/2" dia

Supply and install hi wall split units indoor & outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with copper cooling coil with minimum 3 star rating and EER 3.2 of capacity 2.00 TR complete all as specified and directed.

Supply and fix voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed.

Sree Ram Enterprises

SAWARIYA ENGINEERS AND CONTRACTORS

GENIMAA PRIVATE LIMITED