SPECIAL REPAIR TO BLDG NO P 503 AND P 504 (OMQs IN DJ AREA) AT AF STN JODHPUR

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for (roof padding, concrete in sunken floor above ground floors) including roof treatment and removing from site all as specified and directed.

M&L for dismantling floor heart or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and com[plete all as specified.

Taking down cement or cement lime plaster of any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc and complete all as specified

Taking down chowkats or frame with shutter (without taking off shutters from the frames) n exc 1.5 Sqm complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frames) exc 1.5 Sqm and n exc 4.00 sqm each of any description incl making good the disturbed surfaces complete all as spd and as directed.

Taking down shutters of any description exc 1 sqm & n exc 2 sqm each and refixing in Same opening after doing suitable repairing hinges etc or as directed by Engr-In-charge

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 15 mm complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 20 mm complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 25 mm complete all as specified and directed by Engr-in-Charge.

Wire brushing and cleaning top surfaces of tarrace or cement concrete including flashing and junction of parapets complete all as specified and directed by Engr-in-Charge.

M&L 10 mm thick plaster with CM 1:4 with water proofing compound @ 3% by weight of cement finish even and smooth surfaces using without extra cement. Water proofing compound shall be measured and paid seperately & complete all as specified and directed by Engr-in-Charge.

M/L for cement concrete B-1. 1:2:4 (20mm graded aggregate) in padding finishing surface of concrete topping even and fair without using extra cement all as specified of average thickness 50 mm in slop 1:40 over roof & complete all as specified and directed by Engr-in-Charge.

M/L APP modified membrane minium weighting 3 Kg/Sqm with polyster non woven polyster reinforcement ( weight not less than 150 gms/sqm )shall be laid by torch application method and overlapped by 100 mm in all sides as directed by Engr-in-Charge

M&L for light coloured Vitrified Ceramic tiles 9-10 mm thick area of each tiles not less than 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed by Engr-in-Charge.

All as per item No.14.00 above but on vertical surfaces such as dados, skirtings and risers to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces complete all as specified and directed by Engr-in-Charge.

M&L for joint free non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic tiles, coloured, 450x300x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces complete all as specified and directed by Engr-in-Charge.

M& L for 10mm thick rendering on stone masonary in CM 1:4 on walls using integral water proofing compound @ 3% weight of cement , finished even and smooth without using extra cement and all as specified.(NOTE;- Water profing compound shall be measured and paid seperately)

M&L for rendering 15 mm thick in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Supply only integral water proofing compound ISI Marked complete all as specified and directed by Engr-in-Charge.

M&L for applying two coat of Oil emulsion distemper (tint as approved by GE)including prepration of newly plastered wall surface complete all as specified and directed by Engr-in-Charge.

M&L for prepration of New plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer white or tined complete all as specified and directed by Engr-in-Charge.

M&L for preparation of Old plastered or unplastered surfaces of walls and applying one coats of cement base paint, white or tinted, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of old treatment by mechanical means from walls and applying two coats of wall putty and sanding and applying two coats of oil emulsion distemper white or tinted by pump roller applicator ,complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted wooden surface of any description not otherwise provided over 10 cm width or girth and applying one coats of synthetic enamel paint and complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel surface of any description not otherwise provided over 10 cm width or girth and applying one coats of synthetic enamel paint and complete all as specified and directed by Engr-in-Charge.

Cleaning and removing all scale dirt etc. from water storage tanks and from mouth of circulating pipes etc. and writing the date of cleaning and next due date for cleaning of tank, capacity of tanks exc. 250 liters and not exc. 500 liters complete all as specified and as directed.

Cleaning and removing all scale dirt etc. from water storage tanks and from mouth of circulating pipes etc. and writing the date of cleaning and next due date for cleaning of tank, capacity of tanks exc. 500 liters and not exc. 1000 liters complete all as specified and as directed.

S&F in repairs, EWC vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified.

S&F in repairs vitreous- China wash down water closet Squatting pan ( Orissa Pattern) size 580 x 440 mm including flush pipe , PVC P-trap and PCC for fixing complete all as specified and as directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-Charge.

S&F in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms.) complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge.

S & F PVC waste pipe 32mm bore of suitable length for WHB/Urinsl/sink complete all as specified and as directed

S&F in repair CP soap dish, fixed to plugs with chromium plated screws and all as specified.

S&F in repair CP tubular towel rail, 20 mm dia, D type, 60 cm long between flanges and all as specified

S&F in repair CP grating 100 mm dia all as specified and as directed.

S&F Single mirror bath room cabinet moulded body and frame (made of strong and fine quality A.B.S plastic) with hinged door (size 16"x12"6") white/ivory in colour complete all as specified and directed by Engr-in-Charge.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed by Engr-in-Charge.

S&F in repair corner shelf (set of three) of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) and all as specified and as directed.

S & F sinks with drainage boards made of stainless steel 1 mm thick kitchen or laboratory with plugs,washers and wastes,including bedding in cement mortar o to dwarf wall or including fixing cantilver brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed by Engr-in-Charge.

M&L for granite (of any type) tiles 20 mm thick machine cut in skirting/dado over and including 15mm thick rendering in CM 1:6 on stone masonry surfaces, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed by Engr-in-Charge.

S & F 15 mm dia galvanized steel tubing, medium grade, (Concealed type) with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S & F 20 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S & F 25 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S&F in repairs, 15 mm bore stop valve, fancy type, chromium plated with long shank and cup screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engr-in-Charge.

S&F in repair Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of 20 mm dia complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bib taps cast copper alloy CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm bore brass chromium plated bib cock two in one with angle cock including fixing to steel pipe or union complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm bore health faucet CP including with flexible pipe complete with fixing accessories complete all as specified and directed by Engr-in-Charge.

S&F in repairs stainless steel plate rack, 0.56 mm thick of standard pattern, of size 788x915x254 mm (31"x36"x10") complete all as specified and directed by Engr-in-Charge.

S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and directed by Engr-in-Charge.

Dismantling of existing water tank (PVC/RCC/AC) exc 500 ltr but n exc 1000 ltr capcity and removing from site complete as directed by Engr -in-charge.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 100 mm dia

S&F 75 mm bore UPVC (SWR) pipes type ‘A’, single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) door bends 110 mm dia with acess door complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm with acess door complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints fixed in walls complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR), junction single, (Single T) with acess door 110 mm dia equal or unequal complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) door bends 110 mm dia with acess door complete all as specified and directed by Engr-in-Charge.

S&F 110 mm dia PVC WC connector with lip ring complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) floor trap with garting of outlet dia 75mm incl jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

Resecuring or easing & adjusting without taking down shutters of any description exc. 1 sqm but n. exc. 2 sqm each complete all as specified and directed by Engr-in-Charge.

S&F in repairs 40 mm dia cupboard knobs of fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed by Engr-in-Charge.

S&F in repairs continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps (when open) 30 mm complete all as specified and directed by Engr-in-Charge.

S&F 75mm size brass handles,cast type,polished bright for kitchen cabinate complete all as specified and directed by Engr-in-Charge.

S&F 18mm thick solid UPVC (WPC) of density not less than 0.60 gm/CM3 decorative face on one faces and other face are white ; fixed with screws to timber frame work as in kitchen cabinate approval by Engr-in-Charge.

S&F PVC insulated panels 30mm thick for cupboard shetters of required sizes at site made out of 18mm thick one side decorative teak face finish consisting of 18mm thick PVC sheet/ board including all necessary fittings and fixures like handles, hinges, locking devices, maganetic catches etc. All the edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bend finish as per make and specification complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube complete all as specified and directed by Engr-in-Charge.

S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed by Engr-in-Charge.

S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars complete all as specified and directed by Engr-in-Charge.

Pressed steel frames of size 125x60mm thickness 1.25mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified.

S&F framed work such as grills gratings etc with ends of bars shoulders and/or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings frame work of water tanks and similar works conforming to Fe 290 gde E-165.

M&L for plain cement concrete type B-1 (1:2:4) using 20mm graded cruhed stone agg as in seismic and other similar bands shelves coping bed plates hold fasts plinth courses filling in pressed steel frame and the like finished fair and even incl necessary from work complete all as specified & directed.

S&F 35 mm thick factory made, second class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.

M/L for Glazed and skeleton shutters of thickness 35mm of IInd class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of doors shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats note: Glazed or clothetc in panelsor sash square shall be measured seperately complete all as specified and directed by Engr-in-Charge.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

M&L for preparation of New painted wooden surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint and complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new painted steel surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint and complete all as specified and directed by Engr-in-Charge.

S&F galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-Charge.

S&F 200 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engr-in-Charge.

S&F extructed aluminium alloy handles, fabricated type,anodised of size 125mm complete all as specified and directed by Engr-in-Charge.

S&F extructed aluminium alloy handles, fabricated type,anodised of size 150mm complete all as specified and directed by Engr-in-Charge.

S&F Aluminium anodised barrel tower bolt of extruded section 150mm size complete all as specified and directed by Engr-in-Charge.

S&F Butt hinges,heavy weight cold rolled mild steel of size 100mm complete all as specified and directed by Engr-in-Charge.

S&F Butt hinges,heavy weight cold rolled mild steel of size 125mm complete all as specified and directed by Engr-in-Charge.

S&F in repairs extructed aluminium alloy handles, fabricated type,anodised of size 125mm complete all as specified and directed by Engr-in-Charge.

S&F in repairs extructed aluminium alloy handles, fabricated type,anodised of size 150mm complete all as specified and directed by Engr-in-Charge.

S&F in repairs Aluminium anodised barrel tower bolt of extruded section 150mm size complete all as specified and directed by Engr-in-Charge.

S&F in repairs Butt hinges,heavy weight cold rolled mild steel of size 100mm complete all as specified and directed by Engr-in-Charge.

S&F in repairs Butt hinges,heavy weight cold rolled mild steel of size 125mm complete all as specified and directed by Engr-in-Charge.

S&F curtain rod, stainless steel, chromium plated with fixing brackets, stops, rollers etc of 25mm bore complete all as direcred by Engr-in -Charge.

S&F stainless steel decorative end cap suitable for 25mm dia curtain rod as per approval by Engr-in-Charge.

S&F in repairs galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-Charge.

Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm all as specified and directed by Engr-in-charge

S&F in repairs floor door stopper, with 150 mm long cover plate, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engr-in-Charge.

S&F in repairs 200 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engr-in-Charge.

S&F in repair MS peg set with 3 to 5 hooks fixed to doors/wall with screws complete all as specified and directed by Engr-in-Charge.

S&F in solid rubber beading of 30 to 50 mm wide and 3 to 5 mm thick fixing at bottom to existing doors all as directed by Engineer-in-Charge.

S&F in repairs box type hinges of steel window/ventilator, 75/100 mm long including necessary fixing & welding work etc complete all as directed by Engr-in-charge.

S&F in repairs left/right MS handle of steel windows including welding(if required) & fixing complete all as directed by Engr-in-charge.

S&F in repair MS 300 mm , ordinary rat tail rod pattern springs including rooler and roller plate complete all as specified.

M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty including punching or drilling out old glazing pin/spring, clips and providing new ones complete all as specified and directed by Engr-in-Charge.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n.exc. 0.5 sqm in each paneand complete all as specified.

S&F figured glass 4mm thick, pin head type and glazing with oil putty in square n. Exc 0.5 Sqm in each pane complete all as specified & as diretced

M&L for powder coated anodised aluminium frame for door window & ventilator with one or more rebates including joining cleat for fixing etc comlete all as specified.

S&F louvers with including arrangement of fixing glass pinhead as per size & louvers ventilator (Glass shall be measurement separately) complete all as specified and as diredcted.

S&F in repairs for center hole basin mixer without popup waste system prayag and complete all as directed by Engr-in-charge

S&F in repairs for sink mixer with regular spout w/m ,prayag and complete all as directed by Engr-in-charge

S&F in repairs for wall mixer with bend, prayag and complete all as directed by Engr-in-charge

Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface (Soft/loose soil) complete all as specified and directed by Engr-in-Charge.

M&L for mild steel misc works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.

M&L for cement concrete type C-2, 1:3:6 using 40mm graded aggregate as in foundation, filling and mass concrete complete all as specified and as directed.

Mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut (dia of neck 10mm and 50mm long) complete all as specified and directed by Engr-in-Charge.

Supply only chain link MS Galvanised fencing wire Mesh size 100mm X 100mm made into mattresses laped wired laid in postion all as complete all as specified and directed by Engr-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type of any type of standards, rails, straining bolts, etc including provision of binding wire any size or type weight n exc 4 Kg per Sqm as approved by Engineer-in-Charge.

Supply only for mild steel bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthatic enamel paint over one coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.

Material and labour for water proofing treatment of sunken floor of WCs, bathroom etc. by applying of the following specifications :- (i) Cleaning of sunken floor surface with mechanical means i.e. wire brush/air blower etc. and remove all loose/unsound material, dirt, dust, etc.(ii) Applying cement slurry mixed with acrylic based polymer modified cementitious composite compound coating Hydroproof Xtra of FOSROC/Equivalent of Dr Fixit of Pidilite Industries Ltd in the ratio of 1:2:4 (One part of acrylic polymer : Two part of water and four part of cement).(iii) First layer of cement slurry @ 0.444 Kg/Sqm mixed with acrylic based modified cementious composite compound @ 0.222 Litre/Sqm and allow it to air dry for 04 hours.(iv) Second layer of cement slurry @ 0.222 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.111 Litre/Sqm and allow it to air dry for 04 hours followed with water curing for 48 hours.(v) 200 micron thick polythene film shall be pasted with help of adhesives over treatment.Note :- Joints of WC/Trap/Soil waste shall be properly sealed with sealing compound. Testing of all traps and joint and sunken slab shall be done as per IS-1742 before filling and tiling work complete all as specified.

Material and labour for plain cement concrete 1:5:10 type E-2 (using 40mm graded broken bricks aggregate) as in foundation, filling and mass concrete, complete all as specified and as directed.

Material and labour for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling courses laid and compacted in slope in floor complete all as specified and as directed.

M&L for poviding and injecting chemical emulsion for post construction anti termite treatment along external wall where the apron is not proving using chemical emulsion at theart of 7.5 ltr per sqm of the vertical surface of the sub structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified and directed.

M&L for treatment of soil under existing floors using emulsion @ one litres per hole 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors and all as specified and directed.

M & L for 75mm thick Plain Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) complete all as specified and directed by EIC.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, set and jointed in CM (1:4) with grey cement and With pigment complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in coping , including necessary form work complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (Light/ fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc, stacking at site for reuse or removing materials to store for keeping in for taking credit and making good the disturbed surfaces / walls/ floors etc,.

M&L for channel or grooves cutting upto a depth of 2.5 cm and width not exc 15cm into brick/concrete/stone masonary walls, with or without re-inforcement and trimming surface as required, including concealing PVC conduit 20/25mm dia with required accessories (like junction boxes/bends etc) and plastering in 1:4CM, applying two coats of approved quality white putty for making good with smooth finish to match with the existing specification of wall surface all specified and directed by engr-in-charge. Note : Rate of PVC Conduit included in relavant point wiring and shall not be paid separately.

M&L for point wiring with 1.5 Sq. mm, multi-stranded copper conductor, single core, PVC insulated and unsheathed cable for phase and neutral, including 1.5 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly, drawn in surface/concealed conduit Heavy duty (HMS Grade), GI terminal boxes not less than 1.0mm thick fixed flush to wall surface, covered with & including 3 mm thick plastic laminated sheet top cover or including modular plates of required size for mounting switch and sockets etc. complete all as specified and directed for following : - Note : Quoted rates deems to be included cost of modular plate or hylem board for mounting switches, sockets & regulators as required at site. Cutting into chases required for concealing heavy duty (HMS Grade) PVC conduits and making good to damaged surface shall be measured and paid separately under relavant item.

(a) One light / fan point controlled by one switch one way.

(b) One light point controlled by two Nos 5 Amps switch two way

(c) One 3 pin 5 Amp switch & socket outlet on same board with other switches.

(d) One 3 pin 5 Amp switch & socket outlet on Independant board.

(e) One bell point controlled by one switch 5 Amps bell push.

All same as per item ser No 137 here-in-above but wiring using 2.5 sqmm multi-stranded copper conductor, single core, PVC insulated and unsheathed cable, including 2.5 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly for 6 pin, 15/16 Amps socket outlet on independant board.

All same as per item ser No 137 here-in-above but wiring using 4.0 sqmm multi-stranded copper conductor, single core, PVC insulated and unsheathed cable, including 4.0 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly for two pin earth metal clad plug & socket point for AC/Geysers.

S&F Switch piano, flush type, single pole, one way, 6 Amp.

S&F Switch piano, flush type, single pole, two way, 6 Amp.

S&F Switch piano, flush type, single pole, one way, 16 Amp.

S&F Socket outlet 2/3 pin, 2-in-1, 5/6 Amp, flush type.

S&F Socket outlet 6 pin, mulitpurpose 6/16 Amp, flush type

S&F bell push, flush type, 6 Amps

S&F Ceiling rose surface bakelite 65x50mm three terminal with PVC back plate

S&F Stepped type electronic fan regulator, socket size, flush type 230V AC.

S&F Lamp holder insulated PVC/Polycarbonate/bakelite body, fixed on PVC round or squre box using necessay screw & gutti complete all as specified.

S&F electronic Bell Bul-Bul music, 230 volt, single phase.

Taking out existing unserviceable switch board paltes any type, dismantling switches cafully, stacking at site for use of serviceable switches and supply and fixing new 3mm thick masonite laminated sheet top cover fixed on 6/8 inch x 10 inch MS box and brass screw for mounting switches, sockets, regulator etc including making necessary electrical connection with 1.5 sqmm single core copper mulitstranded cable all as directed at site by Engineer-in-charge. Note : New Switches, sockets, fan regulators etc if required will be measured and paid separately under relevant items.

All as per item ser No 150 here-in-before but new 3mm thick masonite laminated sheet top cover white or ivory fixed on 6/8 inch x 4 inch MS box.

All as per item ser No 150 here-in-before but new 3mm thick masonite laminated sheet top cover white or ivory fixed on 4 inch x 4 inch MS box.

Taking down carefully light fitting any type by disconnecting all electrical connections and stacking at site for re-use of serviceable light or shifting to store for taking credit including making good to damaged surface of wall to match with existing specifications all as specified and directed. Note : 1. Only Light fittings those are taken down separately for repair/replacement shall be measured and paid under this item of work. 2. Light fittings taken down alongwith old point wiring will be measured and paid under item No 01 above.

Fixing only light fitting any type, connecting up with twin core PVC insulated and PVC sheathed flexible copper conductor cable of suitable size from ceiling rose complete all as specified. Note : Serviceable light fittings taken down against item No 01 shall be used at site as directed by engr-in-charge.

Supply and fixing LED light fitting wall /roof mounted, 1 x 20 watt including LED tube with driver complete suitable body robust, corrosion resistant, superior finish and without any cracks or through holes. The system wattage of fitting should not be more than 20 watt ± 10%, surge protection of minimum 2 kV power factor should be more than 0.90 cool white colour, total harmonic distoration (THD) should not be more than 15%, lumen output should not be less than 90 lumens per watt, total input voltage range 140-280 V AC, colour rendering index should not be less than 80, corelated colour should be minimum 6000 degree kelvin complete all as specified and directed.

Supply and fixing LED light fitting wall /roof mounted, 1 x 9/10 watt including LED tube with driver complete suitable body robust, corrosion resistant, superior finish and without any cracks or through holes. The system wattage of fitting should not be more than 20 watt ± 10%, surge protection of minimum 2 kV power factor should be more than 0.90 cool white colour, total harmonic distoration (THD) should not be more than 15%, lumen output should not be less than 90 lumens per watt, total input voltage range 140-280 V AC, colour rendering index should not be less than 80, corelated colour should be minimum 6000 degree kelvin complete all as specified and directed.

S&F Building security light fittings, with pressure die cast aluminium housing, suitable for 25W LED, complete pre-wired, incl suitable bracket for fixing light on wall or any indicated locaction all as specified and as directed by Engr - in Charge complete

S&F LED light fitting 1 x 10W bulkhead luminaires including LED light driver perfect interior and exterier application connecting up with three core flexible copper conductor cable of suitable size complete

Taking down carefully Ceiling fan/Exhaust fan by disconnecting electrical connections, unsecrewing from position, stacking carfully at site for reuse of serviceable fans or dismantling blades and removing fan and blade to E/M Store yard all as directed and specified.

Taking down carefully electric geyser storage type 25/50 ltr capacity by disconnecting electrical/water connections, unsecrewing from position, stacking carfully at site for reuse of serviceable geyser or removing to E/M Store yard all as directed and specified.

Taking down carefully Enegry meters by disconnecting electrical connections, stacking carfully at site for reuse of serviceable meters or removing meters to E/M Store yard all as directed and specified.

Hanging only ceiling fans, 1200mm sweep, complete with three blade, down rod, accessories and making connection from ceiling rose or connector to fan using three core 0.75sqmm copper stranded conductor PVC insulated and PVC sheathed flexible wire complete all as specified. NOTE: Serviceable fan taken down against item No 30 shall be used at site as directed by engr-in-charge.

Fixing only exhaust fan 300/450mm sweep, Steel/PVC body AC single phase 230V of size 300m using 4 Nos 10mm x 100mm long wall fasteners, nut and washers and connecting up using flexible three core 0.5sqmm copper stranded conductor PVC insulated and PVC sheathed flexible wire through PVC flexible conduit from ceiling rose/connector to fan complete all as specified. NOTE: Serviceable exhaust fans taken down agaist item No 18 shall be re-used after necessary cleaning and serving at AGE E/M store yard.

Installation only Electric Storage type water heater (Geysers) 25/50 Ltr capacity with standard fixing accessories including suitable size wall fastener bolts & Nuts, gutties etc complete all as specified and directed. NOTE: Taken down serviceable geyser against item No 25 shall be used after cleaning and necessary repairs.

M&L for Sub main wiring with approved colour coding as per IS, single core FRLS PVC insulated flexible multistranded copper conductor 1.1 KV grade drawn through & including PVC grey conduit heavy duty with necessary accessories (like bend, juction boxes etc) including taking down old unsv submain wiring complete all as specified for Two runs of 4.0 Sq.mm main cable alongwith one run of single core 4.0 Sq.mm for continuous earth wire in green color.

M&L for Sub main wiring with approved colour coding as per IS, single core FRLS PVC insulated flexible multistranded copper conductor 1.1 KV grade drawn through & including PVC grey conduit heavy duty with necessary accessories (like bend, juction boxes etc) including taking down old unsv submain wiring complete all as specified for Two runs of 6.0 Sq.mm main cable alongwith one run of single core 6.0 Sq.mm for continuous earth wire in green color.

Supply and replace sheet metal enclosures with socket plug top, and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB upto 20 Amps, 240 Volt capacity fixed flush to wall surface including making good to damaged surface of wall to match with existing specification and tested on completion complete including taking out old all as directed.

Supply, installations, testing and commissioning factory made indoor cubical type panel box for fixing energy meter, 4 each separate compartment for each energy meter, frabricated using 2.0mm thick MS sheet, duly provided with 8 mm thick flame proof backelite/hylem sheet for mounting Enegry meters in each compartment, and provision pre-wiring and fixing of incomming and outgoing control MCCB/MCBs, each meter comapartent shall provided with front opening hinged door with internal or external locking arrangment. MS box duly painted with two coats of powder coated Semense gray paint over a coat of red oxide primer. The meter box shall designed and fabricated for fixing 01 x MCCB 100 Amps 4 pole as incommer and vertical or horizontal copper busbar chamber for taking connection to incommer MCB of each meter by using 10 Sqmm, PVC insulated multistranded copper conduction wire single core in proper color codes all as specified to accomodated as under :- (a) MCCB 100 Ams, 4 pole, 16 kA, (Ics=100 % of Icu) - as incommer (b) Copper Busbar 200 Amps duly sleev insulated for set of 3 phase, 4 wire system - 01 Set (c) 2 runs of PVC insulated single core multistraded FRLS grade copper wire for conncetion from busbar to input supply of Each energy meter by using necessary copper alloy lugs/thimbles. (d) MCB SPN 63 Amps on each meter incomming pre-wired - 4 Nos (one incomming each meter) (e) MCB SPN 40 Amps on each meter outgoing pre-wired - 8 Nos (Two outgoing on each meter) (f) LED Indicator lamp (R,Y,B) - Set of Three. Note : Quoted rate includes the cost of all necessary clamp, wall fasters for fixing meter box on wall surface and making all incomming and outgoing electrical connections with existing input cable and outgoing wires.

Supply and replace sheet metal enclosure distribution board for 240 volts, 12 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and blank plates and fixed flush in wall surface, and tested on completion complete including taking out old all as directed.

M&L for MCB SPN/DP 40 to 63 Amps 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

Supply and fixing MCB single pole 6-32 Amps, 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified. Note for MCBs : Current rating of MCBs provided at site shall be as per electrical load of circuits and as directed by engr-in-charge

Material and labuor for earthing complete with Galvanized Steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level and filled with 15cm thick alternate layers of charcoal and salt, connected & including GI wire earth lead 4.0mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron protected by 15mm dia GI Pipe (light grade). Earth plate shall be surrounded by alternate layers of charcoal or coke and common salt in 15cm thick in layers & 15cm of widht all aurround of earth plate including 20mm dia GI light grade pipe for watering and including funnel, wire mesh, necessary earth work in any type of soil, Pre-cast RCC cover duly re inforced with 8mm dia TMT Bar @150 mm c/c both ways, one lifting handle made of 8 mm dia TMT bar embedded in cover slab, Earth Pit of PCC (1:3:6) type C2 (using 20mm graded crushed store aggrgate) complete all as specified and as shown in electrical plate No-3 of SSR Part-I including testing on completion. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) The unit rate includes earthing lead & protection pipe upto 7.5 metre from top of earth plate.

VIKAS CONSTRUCTION CO.