Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 LAccepted-AOC EDATHARA | ₹3.5 L | L1 | Accepted-AOC L1 BIDDER |
| 2 | L2₹4.1 L+₹62,614.92 (17.8%)Rejected-AOC | ₹4.1 L+₹62,614.92 (17.8%) | L2 | Rejected-AOC L2 BIDDER |
| Sl No | Description | Qty | Unit | VISHNU M L1 | T Sundar Raj L2 |
|---|---|---|---|---|---|
| 1.00Maintenance Works | |||||
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 126 | kg | 485.31 ₹61,149.06 Lowest | 571.85 ₹72,053.1 |
| 1.00 | 21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | 60.75 | sqm | 1,004.51 ₹61,023.98 Lowest | 1,183.63 ₹71,905.52 |
| 1.00 | 21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm) | 15 | sqm | 1,379.67 ₹20,695.05 Lowest | 1,625.69 ₹24,385.35 |
| 1.00 | 9.166.1:Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable
full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard,
kitchen cabinet under kitchen counter etc. all complete as per direction of
Engineer-in-charge (Note: Fittings to be paid separately).18 mm thick | 37.44 | sqm | 1,265.4 ₹47,376.58 Lowest | 1,491.03 ₹55,824.16 |
| 1.00 | 15.57:Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge | 37.06 | sqm | 48.42 ₹1,794.35 Lowest | 57.05 ₹2,114.16 |
| 1.01 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 390 | kg | 148.09 ₹57,755.1 Lowest | 174.49 ₹68,051.1 |
| 1.01 | OD148958/2026-2027:Providing Carpenter labour for resetting existing cabins and cupboards | 10 | no | 994.29 ₹9,942.9 Lowest | 1,171.58 ₹11,715.8 |
| 1.01 | 10.15.2:Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular /L-Type sections, made of 1.60 mm thick M.S. Sheet,joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with carbon steel galvanised dash fastener of required dia and size ( to be paid for separately) | 60.06 | kg | 139.04 ₹8,350.74 Lowest | 163.84 ₹9,840.23 |
| 1.01 | 13.91:Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 371.58 | sqm | 21.72 ₹8,070.72 Lowest | 25.59 ₹9,508.73 |
Tender Value
₹4.2 L
EMD Value
₹10,578
Closing Date
24 Aug 2026, 4:00 pmClosed
Assistant Engineer
Office of the Assistant Executive Engineer LID and EW Sub Division Kuzhalmannam Block Panchayat
Annual Plan KBP 2026 27 Maintenance works to CDPO office in Kuzhalmannam Block Panchayat Proj 55
2026_LSGD_865053_2
02/2026-27/AEE/LIDEW/KZMN/PH2
Open Tender
Civil Works - Buildings
Item Rate
240 days
Kuzhalmannam
Please refer Tender documents.
9 documents required · 9 mandatory
₹935
Yes
₹10,578
Yes
1 Sept 2026
11 Aug 2026
31 Aug 2026
11 Aug 2026
24 Aug 2026
11 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Maintenance Works | |||||
| 1.001 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | - | kg | - | - |
| 1.002 | 21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | - | sqm | - | - |
| 1.003 | 21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm) | - | sqm | - | - |
| 1.004 | 9.166.1:Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable
full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard,
kitchen cabinet under kitchen counter etc. all complete as per direction of
Engineer-in-charge (Note: Fittings to be paid separately).18 mm thick | 1 | sqm | - | - |
| 1.005 | 15.57:Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge | 1 | sqm | - | - |
| 1.006 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | - | kg | - | - |
| 1.007 | OD148958/2026-2027:Providing Carpenter labour for resetting existing cabins and cupboards | - | no | - | - |
| 1.008 | 10.15.2:Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular /L-Type sections, made of 1.60 mm thick M.S. Sheet,joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with carbon steel galvanised dash fastener of required dia and size ( to be paid for separately) | - | kg | - | - |
| 1.009 | 13.91:Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 1 | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1463789.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.14 MB
Tendernotice_2.pdf
PDF • 0.11 MB
Tendernotice_3.pdf
PDF • 0.10 MB
AFFIDAVIT.pdf
Tender Documents • 0.10 MB
FEEREMITTANCE.pdf
Tender Documents • 0.12 MB
SBD.pdf
Tender Documents • 0.86 MB
BOQ_1463789.xls
BOQ • 0.31 MB
PRELIMINARY.pdf
Tender Documents • 0.11 MB
FOT.pdf
Tender Documents • 0.11 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .