MID/AN/09

1. Providing and fitting of 100mm dia C.I. Sluice valve at outlet of delivery tank at LIS Langer (New)by way of cutting of bushes and removing of unwanted malwa/material including breaking/hammering of concrete portion thereby making the site suitable to execute work by using sledge hammer/vibrator machine by engaging semi-skilled worker from outlet of the delivery tank .Cutting of 100mm dia threaded/damaged portion of GI pipes and giving a good surface finish to the cut part by using grinder/emery paper and providing and fitting of superior quality 100mm dia flange with the help of Arc welding to the periphery of pipe and M.S. Flange ensuring sufficient strength and making leak poof joint.Holding the sluice valve along with gasket matching the holes of sluice valve and flange to make joint by nuts bolts and washers etc by skilled labour .Complete job includes cost of material,skilled/semi-skilled labour charges, to and fro charges,welding set ,electrodes,generator,tools etc and testing and commissioning at site (Qty.-02 No. Complete Job) 2. Restoration of EOT crane by way of cleaning the entire rails with the help of wire brush and emery paper ensuring the smooth movement(forward and backward of the crane. The job also includes repair/services of the gearbox by way of dismantling ,checking and cleaning the gearbox housing by cleaning agent,recondition the main and counter shaft at worn out portion and gears.Machining/turning and polishing the shaft and gear teeth to the required pitch including replacement of the old/damaged 01 no. Gear as per existing gear. Job also includes reassembling the gear box and topping of fresh gear oil to the required level. Complete job includes cost of material, skilled/semi-skilled labour charges, hire charges of welding set, portable grinding machine, tools etc at site (Qty.-01 No. Complete Job) 3 Fabrication, providing and installation of stand made of MS angle/channel for existing voltage stabilizers,LT panels and Auto transformer starter at LIS Langer(New) and LIS Langer. The job includes cutting of MS material with the help of cutter, straightening the channel and strips as per the required size.Fabrication of the stand using superior quality welding electrodes, followed by grinding of welded portions to ensure smooth surface and strength of the joints. The job also includes cleaning of the rust etc by using emery paper to create a good surface to prepare for painting. Apply two coats of red oxide followed by high quality paint. Carriage/shifting of the fabricated structure from workshop to station. Disconnecting the main supply and then placing the voltage stabilizers,LT panels and ATS by using chain pulley block, while also ensuring the provision of earthing, so that functioning of equipments is risk free.Complete job includes cost of material, skilled/semi-skilled labour charges, hire charges of welding set, portable grinding machine, tools etc at site (Qty.-01 No. Complete Job)