Extension of HT/LT line including installation of a 100 KVA Distribution Transformer at Sri Krishna Mission School, Agartala for providing three phase Service Connection under ESD- Capital Complex.

Amount

(ERECTION)

Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size on wall surface as required,Above 185 sq.mm and upto 400 sq.mm(Clamped with 40X3 mm M.S flat clamp)

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 11 KV grade of following size direct in ground including excavation,sand cushioning,protective covering and refilling the trench etc as required.Trench Size Width-350 mm,Hieght-1200 mm/sand(couhioning)Hieght-250 mm,Width 350 mm/protection-Double layer Brick Upto 120 Sq mm

Manually digging / drilling horizantal or diagonal direction for road crossing/water supply line/Telcomunication line/Gas pipe line etc.including laying of 64 to 200 mm dia G.I pipe direct into the earth at a depth of minimum 1100 mm below the ground surface with out effecting the existing road including excavation earth for entry pit as per site condition and directon of Engineering In charge.

Fitting fixing of coiling of HT/ LT XLPE cable in all sized in a single pole/ double pole/ four pole at the height of 5/6meter with using 2.2 to 2.8 Mtr. Long 75x40x40x6mm channel as required and fixing of cable with pole by Back Clamp before coiling (Supplied by TSECL) including the cost of Back Clamp, Nuts & Bolts. 3 nos. coiling each for In and Out going cables.

Erection of Stay set direct in earth complete with 19mm x 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm ,thimble, turn buckle, 7/3.15 mm dia G.I Standed stay wire and stain insulator etc. with Supply of M.S.Clamp,Nuts & Bolts etc. as required. and making complete in all respect.(SUPPLY BY TSECL).

Erection of M.S.Channel Cross-Arm,1.3 to 2.8 Mtr.Long 75 X 40 x 40X 6 mm(Excluding the cost of back clamp,Nuts & Bolts)(SUPPLY BY TSECL).

Erection of M.S.Channel Cross-Arm,0.6 to 2.8 Mtr.Long100 x50 x 50 x 6 mm (Excluding the cost ofBack Clamp, Nuts & Bolts)(SUPPLY BY TSECL).

Earthing with G.I pipe 2.5mtr. Long and 40mm dia, including excavation, refilling with alternate layer of salt & Charcoal as per drawing (excluding supply of G.I.Pipe, Salt & Charcoal, Gi wire, nuts &boIts, etc. as required)

Febrication of Cross-Arms by MS Channel/MS Angle as per specification(SUPPLY BY TSECL).

Laying & Stringing of 1KM (Single Conductor) ACSR6/1/3.35 mm dia RABBIT including hoisting & KM binding etc. Complete as required.(SUPPLY BY TSECL).

Erection of 9KV,5KA single pole metal oxide gapless type LA , including necessary connection complete as per technical specification

Erection of 11KV DOF unit set of three nos. including necessary connection complete as per technical specification.(Excluding the cost of back clamp, Nuts & Bolts)(SUPPLY BY TSECL).

Erection of 11KV 200 Amp. GOS unit set of three nos. including necessary connection complete as per technical specification. (Excluding the cost of back cIamp,Nuts & Bolts)(SUPPLY BY TSECL).

Installation/Positioning of 11/0.430KV,3-Phase 100KVA of Distribution Transformer on Pole with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing(SUPPLY BY TSECL).

Erection of 9.0mtrs length of Steel Tubular POLE at any kind of soil , including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.(SUPPLY BY TSECL).

Supplying and Making Indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as requiredUp to 150sqmm

Fixing of cut out(Set of 3nos)on wooden plank(preferably korai wood) of size 24"x10"x1.5"& cable connection with termination by lugs/thimbels)complete(i/c. supply of wooden plank,screws&MS clamp excluding cost of thimble)(SUPPLY BY TSECL).

Providing of Pre-cast cement concretecableidentification route marker (1 cement: 2 coarse sand4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits as per design, drawing and specification of TSECL. The marker snail be embossed "DANGERS: TSECL, ELECTRIC POWER CABLE” with Black colour letter {both side) The visible part shall be painted with Yellow colour japan paint. (1 cement: 2 coarse sand 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits.

Grouting of Steel Tubular PCC Pole of ratio 1:2:4 (1cement:2 riversand:4 Jhama brick Aggregate of 20mm. Nominal size) including supply of cement,sand and brick aggregate. Complete with excavation,refilling of each, ramming along with centering and shuttering as required.

Erection of 4 way (1 incoming and 3 out goining feedero H.TKIOSK/11 KV Outdoor type feeder pillar made of 10 SWG MS Sheet complete with aluminium busbar, HT insulator etc as required provided with locking system and painting to be fitted on structure of MS Angle(50 X 50 X6 mm) and MS flat (40X6 mm) including supply of MS Angle and Flat as required and cocreting of ration 1:2:4 with excavation of earth centering shuttering disposal of excess soil.

Erection of double door LT metering KIOSK box of size 1250mmX1040mmX450mm made of 2mm MS Sheet on 5X50X6mm MS angle structure bus bar made of copper strip ofsize 500mmX50mmX6mm with with locking system and painting for LT metering purpose i/c fitting fixing of cut outs cable and other related work.

(SUPPLY)

XLPE Cable (H.T) 3 C X 70 Sq mm

HDPE Pipe Pe-100 Grade PN 8(SDR 17) 75 mm dia, Wall thickness,minimum-4.5 mm,maximum 5.1 mm

L.T Grade Armoured Cable 3.5 CX 120 Sq mm

L.T Cable Kit for XLPE 3.5 C X 120 Sq mm Indoor

L.T Cable Kit for XLPE 3.5 C X 120 Sq mm Out door

Supply of double door L.T metering KIOSK box of size 1250 mm X 1040 mm X 450 mm made of 2 mm MS Sheet on 5 x 50 X 6 mm M,S angle structure bus bar made of copper strip of size 500 mm X 50 mm X 6 mm with locking system and painting for L.T metering purpose i/c fitting of cut outs cable and other related works

11 KV H.T 4 way outdoor type feeder pillar-KIOSK with necessary fitting and structures complete as per requirement

Supply of febricated clamps of assorted size of MS flat (50 x 6 mm) with double coat of red oxide primercoating

Supply of M.S.Nuts & Bolt i/c Washer of assortedsize ISI Marked machine made

Supply of 2.5mtr. Long , 40mm dia G.I pipe .Make TATA/JINdAL)

Supply of 60Kg Salt & 55Kg Charcoal(For 1 Pit)

(CARRYING OF THE FOLLOWINGS)

Carriage of . of 7.5mtrs /8.0mtrs / 9.0mtrs length of Steel Tubular Poles by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required a) Upto the lead range 25 KM i) For maximum 8 (eight) poles From MMD Store to Sub Division Store

Carriage of G.O.S, D.O.F,L.A,etc., by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required a) Upto the lead range 0-25KM From MMD Store to Sub Division Store.

Carriage of 11/0.430, 3-Phase 100KVA by Mechanical Transport trom the Site /Store/Worshop to working site Vis-a-vis including loading, unloading and placing on base, as required,a) Upto the lead range 25KM From MMD Store to Sub Division Store

Carriage of materials such as Cable,AAC, AAAC, ACSR, G.I,Wire,Cross-Arm,Stay Set,lnsulators etc., by Mechanical Transport from the Electrical Sub- Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required, upto the lead of 25KM & 50KM.a) Upto the lead range 25KM From MMD Store to Sub Division Store.