Special repairs to OR Govt MD Accn Block No P 100 01 TO 03 P 101 01 TO 03 and P 102 01 TO 03 at Kutir Vihar Allenby Lines under GE South Ambala Cantt

Amount

SCHEDULE A PART I (B/R WORKS)

Taking down cement or cement lime plaster, of any description, on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without extra cement complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without extra cement complete all as specified and as directed.

Material and labour for rendering 5 mm thick, in cement mortar 1:3, on faces of concrete surfaces in ceilings and finished fair and even without using extra cement complete all as specified and as directed.

Material and labour for preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of interior emulsion paint over a coat of primer over and including a layer of birla wall care putty using hand roller complete all as specified and directed.

Material and labour for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

Material and labour for preparing newly plastered surfaces of walls and applying two coats of colour wash over a coat of white wash complete all as specified and directed.

Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,etc. and brushing the surface with neat cement slurry @ 3.0kg of cement per sq. metre complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing selviceable tiles to store and rubbish off the defence land remises complete all as specified and as directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles (Square/rectangular), area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm and 7 to 8 mm thick, laid in floor over and including cement screed bed 15mm thick in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the tile colour complete all as specified and directed.

Material and labour for premium quality, printed coloured ceramic tiles of size 350 x 450 x 7mm thick, on vertical surfaces of walls, over and including 10mm thick rough finished plaster in cement mortar (1:3), set, jointed in neat cement slurry and pointed in coloured cement to match tile colour complete all as specified and directed. Note:- Size of tile shall be cut as required.

Demolition of concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) including floor tiles, screed bed etc and removal the rubbish/ demolished material outside defence land complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B2 (using 20 mm graded stone aggregates), 25 mm thick, as in sub base of floors, finished rough and even to receive floor topping complete all as specified and as directed.

Material and labour for machine cut kota stone slab 16-20 mm thick ( size of each stone not less than 55cm x 55cm), laid in flooring, over and including cement screed bed 20mm thick in cement mortar (1:4) base and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed.

Dismantling of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs,aprons, etc. (each layer), laid, bedded and pointed in any mortar all as specified and as directed.

Demolition of mud/ mud phuska, as in roof, any thickness, including leeping plaster and removal of same outside defence land,complete all as specified and as directed.

Material and labour for 40mm thick brick tiles laid on 15mm thick bed in cement mortar (1:6) and jointed and pointed in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and as directed.

All as per serial item No 1.19 here-in- before but using old bricks or brick tiles retrieved from dismantling here-in-before. Note: Old serviceable bricks as obtained from serial item No 1.17 hereinbefore shall be reused after cleaning the tiles. The rate quoted shall include for cleaning the tiles also.

Material and labour for 50 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in roof padding, levelling course, including providing neat cement slurry @ 3Kg/Sqm including preparing slab surface with wire brushing complete and finishing top surface of PCC rough and even to receive the bedding layer including necessary formwork complete all specified and directed by Engr in charge

Material and labour for providing 3 mm thick APP(Atactic polypropylene polymer) modified prefabricated five layer, weight not less than 3.6 Kg/Sqm water proofing membrane, black finished, reinforced with Non-woven polyster matt make as approved over roof consisting of a coat of bitumen primer @ 0.40 Ltr/Sqm by same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25º C temperature and viscocity 70-160 Cps. over the primer coat, the layer membrane shall be using butane torch and sealing all joints etc. after preparing the surface complete over and including 10mm thick cement plaster in CM (1:4) on PCC roof padding including cleaning of existing using WPC @ 2% by wt of cement complete as per standard practice as per manufactuter's instructions all as specified and directed. The vital physical and chemical parameters of the membrane shall be as under:- (i) Joint strength in longitudinal and transverse direction at 25º C as 650/450 N/5 Cms. (ii) Tear strength in longitudinal and transverse direction as 300/250N/5 Cms. Softening point of membrane not less than 150º C cold flexiblility up to 20º when tested in accordance with ASTM (D-5147) (iii) The laying of membrane shall be carried out through the manufacturer or their authorized applicator only.

Material and labour for plain cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) cast in situ as in roof gola including necessary use and waste of formwork complete all as specified.

Demolition and breaking up drain pipes 100 mm dia ( Salt glazed ware, AC or reinforced concrete), set in cement mortar complete all as specified and directed.

Supply and fixing of asbestos cement pipes, 100 mm dia, in any length, with cement joints; fixed to walls complete all as specified and directed.

Demolition of reinforced cement concrete in roof, floors (other than ground floor), beams, stair case, landing, chhajas and similar suspended work complete all as specified and directed.

Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, for rough finished, horizontal or sloping, flat surfaces of concrete complete all as specified and directed.

Material and labour for formwork to to chullah hoods, chajjas, troughs, shelves and similar items including edges, for fair finished, flat surfaces of concrete complete all as specified and directed.

Material and labour for reinforced cement concrete (1:2:4), type B1, using 20mm graded stone aggregates, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for reinforced cement concrete (1:2:4), type B1, using 20mm graded stone aggregates, as in chajjas complete all as specified and directed.

Material and labour for mild steel TMT bars of 10mm dia and over, as in reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for mild steel TMT bars of 8mm dia, as in reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (with-out taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (without taking off shutters from frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Supply and fixing of pressed steel frames of size 125 mm x 60 mm for doors, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm FI, 25mm long, 6 Nos in each chowkhat, necessary lugs, 4 Nos 100 mm butt hinges medium weight, cold rolled, welded for each frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0 filling as in back of chowkhats, 2 Nos 12 mm dia tie bars at the bottom of frame etc and one coat of shop coat of red oxide zinc chrome complete all as specified and directed.

Supplying and fixing of factory made 35mm thick, 2nd class HW, plain framed, panelled shutters with any number of panels with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing of second class hard wood, 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, elc.;sizesof me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

Supply and fixing of mild steel pressed handle, 150mm size, oval type, stove enameled black complete all as specified and directed.

Supply and fixing of mild steel sliding door bolts, 250mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Supply and fixing of mild steel barrel tower bolt, 200mm long, stove enamelled black with bright bolt complete all as specified and directed.

Material and labour for preparing new wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of approved colour synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces, of any description not otherwise described, over 10 cm width or girth including knotting and stopping and applying one coat of approved colour synthetic enamel paint complete all as specified and as directed.

Supply and fixing of steel window box type, with side hung shutters, using ERW hollow 'P' section, factory made, comprising double frame for and including gauged and glazed skeleton shutter, 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219 sheet 1/3 to 3/3 and TD-220 sheet 1/3 to 3/3 as applicable complete all as specified and as directed. Note: (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill 10 mm square bar irrespective of whatever shown on drawings and one shop coat of zinc chromate primer. (iii) Glazing, wire mesh and painting shall be measured and paid for separately.

All as sper item No.1.44 above but steel Box type ventilators fixed type with fixed wire mesh and flat iron bends of 10mmX3mm with nut bolts complete.

Supply and fixing of sheet glass, 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.

Supply and fixing of stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fixing of solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC foam sheet reinforced with M.S. Square tube, supplying & fixing in openings as per specification & drawing complete all as specified and directed.

Supply and fixing of factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , including supplying & fixing in the frame with 3 Nos Stainless Steel butt hinges complete all as specified and directed. Make:Sintex /Cactus/Rajashree

Supply and fixing of 200 mm long aluminium anodised barrel tower bolts of extruded section, ISI marked and fixed complete all as specified and as directed.

Supply and fixing of aluminium handle, 150 mm long, cast type, anodized, ISI Marked complete, all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc, complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks old size , burnt, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified .

All as above Item No 1.53 but except bricks complete all as specified and as directed. Note: Old serviceable bricks as obtained from serial item No 1.52 hereinbefore shall be reused after cleaning the tiles. The rate quoted shall include for cleaning the tiles also.

Material and labour for PCC 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregate), 50mm thick, as in plinth protection/PCC path and paving, laid in panels of area not exceeding 1.20 sqm with 12mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/PCC Path and paving and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.

Supply and fixing in repair, water storage tank of 500 ltr capacity, HDPE double layer, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore, including taking down the existing unserviceable water tank and removing from site complete all as specified and directed. Note:- Make of tank shall be engraved on the tank.

Supply and fixing of gun metal, globe or gate valve, with iron wheel head, 15mm dia, screwed both ends for iron pipes or unions complete all as specified and directed.

Supply and fixing of gun metal, globe or gate valve, with iron wheel head, 20mm dia, screwed both ends for iron pipes or unions complete all as specified and directed.

Taking up or down 15mm bore, steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Refixing old serviceable steel water tubing of 15 mm bore, in new or old position, any grade, with all new fittings as required, fixed to walls and ceilings or laying in floors complete all as specified and as directed. Note: Old tubes reteived from serial item No 1.60 hereinbefore shall be reused in this item.

Refixing old serviceable steel water tubing of 20 mm bore in new or old position any grade, with all new fittings as required, fixed to walls and ceilings or laying in floors complete all as specified and as directed. Note: Old tubes reteived from serial item No 1.60 hereinbefore shall be reused in this item.

Supply and fixing of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fixing of GI tubing, ISI Marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fixing in repairs, vitreous china squatting pan of Orissa pattern, size 580mmx440mm, white (Ist quality) with ‘P’ or ’S’ trap, with front or back inlet and integral foot rests of any pattern including provision of lime concrete bedding for fixing and making good to existing floor surface to match with the existing surface and connection to flush pipe, trap, anti syphonage pipe, etc including taking down and removal of existing unserviceable squatting pan of any description and size complete all as specified and directed.

Supply and fixing in repair, vitreous china wash hand basin, white colour, flat back, of size 550x440mm, ISI marked, with 2 Nos.CI brackets embedded in cement mortar 1:4, PVC waste pipe, 45cms long, fixed to walls, 15mm dia PVC connections and chromium plated waste coupling, etc.,including taking down/removal of existing unserviceable wash hand basin of any description and size and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

Supply and fixing in repairs of 10 litre capacity, virgin polypropylene cistern, ISI marked, coloured, low level, valveless syohonic action type, complete with PVC bend/flush pipe and making all connections including taking down existing high or low level unserviceable flushing cistern and making good the disturbed surface to match with the existing surface complete all as specified and directed.

Supply and fixing in repairs of bib taps, 15mm bore, long body, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule or union and fixed and taking down and removal of existing unserviceable tap of any description and size complete all as specified and as directed. Note : Weight of bib tap shall not be less than 0.575 Kg

Supply and fixing in repairs of stop valves, 15mm bore, fancy type, chromium plated, with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed and taking down and removal of existing unserviceable stop valves of any description and size complete all as specified and as directed. Note : Weight of stop valve shall not be less than 0.575 Kg

Supply and fixing in repairs of angle valves, 15mm bore, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with capstain head, heavy with adjustable wall flange, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed and taking down and removal of existing unserviceable angle valves/valves of any description and size complete all as specified and as directed. Note : Weight of angle valve shall not be less than 0.575 Kg

Supply and fixing of 15mm bore brass chromium plated pillar tap, fancy type, chromium plated, cast copper alloy with capstan head, screwed down, high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and taking down and removal of existing unserviceable pillar taps of any description and size complete all as specified and directed.

Supply and fixing of brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Supply and fixing in repairs, chromium plated soap dish, of approved size, with fittings and fixed with brass screws complete all as specified and directed.

Supply and fixing of grating square (SLIT) 150mm size, of PTMT. (Minimum weight 100 gms) complete all as specified and directed.

Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth in brick walls complete all as specified and as directed.

Supply and fixing in repairs, brass chromium plated shower rose,125mm size, with or without swivel joints, any size. including fixing to steel pipe or union complete all as specified and as directed.

Supply and fix in repair, stainless steel sink with draining board, made out of 1mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 940mmx455mm with bowl size 405x355mmx178mm including waste pipe and waste fittings, brass, chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fixing in repair stainless steel plate rack 1mm thick of size 900 x 900 x 200mm weighing not less than 10 Kg each fix with stainless steel screw to wall, complete all as specified.

Dismantling of PVC (SWR) pipes, any length and dia complete all as specified and directed.

Supply and fixing of PVC (SWR) pipes, 75mm bore, single socketed, in any length with rubber ring joints, laid in floors or trenches complete all as specified and directed.

Supply and fixing of PVC ( SWR) vent pipes, 75 mm bore, single socketed, in any length, with rubber ring joints, fixed to wall complete all as specified and directed.

Supply and fixing of PVC (SWR) bends, 75 mm bore, of any radius complete all as specified and directed.

Supply and fixing of PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed.

Supply and fixing of PVC (SWR) floor trap, 75mm outlet dia, plain with grating including jointing with solvent cement complete all as specified and directed.

Material and labour for PCC 1:2:4 type B1 using 20mm graded stone aggrgate as in surface channels and drains including necessary formwork complete all as specified and directed.

Material and labour for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc.complete all as specified and as directed.

Supply and fixing in repairs, mild steel 32mm dia,1.6mm thick, PVC coated, fancy type, heavy duty drapery rod, including supply & fixing fancy type brass coloured PVC elbow or wall end sockets at ends and mild steel powder coated brackets for fixing drapery rod complete all as specified and as directed.

Supply and fixing in replacement mild steel almirah shutters with frame, exceeding 1.5 Square metre, made of 1mm thick mild steel sheet, in two leaves, as built in furniture in cupboards, including locking arrangement with mortice lock of mild steel, vertical type, 65mm size, 2 lever, ISI marked with duplicate keys and handle, etc. (all as per Godrej pattern) including two coats of approved colour synthetic enamel spray painting over a coat of red oxide primer complete fixed in brick or concrete wall with minimum six numbers of 10mm dia and 100mm long mild steel bolt with washer and nut in cement mortar (1:4) or PCC 1:2:4, type B-0, complete all as specified and directed.

Supply and fixing of mild steel helical door spring,150 mm long, fixed with screws to wooden chowkhats or welding to steel chowkhats complete all as specified and directed.

Supply and fixing of mild steel framed work as in door chowkats /gate of angle or other section of grade Fe-290-Gde E-165 with gusset plate rails, braces etc welded/drilled for fixing of steel sheeting or other covering doors etc. to be prepared for sliding or hanging with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) and hanging also fastening and fixing complete all as specified and directed.

Supply and fixing of 0.80 mm thick mild steel plain black sheeting as in covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified.

Material and labour for granite tile or slab (of any type), 16-20mm thick, machine cut and machine polished and moulded as in steps, jambs, pillar, counter WHB, floor, window cill etc laid over and including 10mm thick cement mortar (1:4) bed and jointed with grey cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

SCHEDULE A PART II (E/M WORKS)

Taking down carefully any type of aluminium or copper point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, sockets, tube light fittings with all accessories etc., and/or drawing out from existing conduit/batten and removal of materials from site and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 25 mm dia with (Halogen free fire retardant/Zero Halogen fire retardant) accessories, concealed in wall/ceiling with and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover extended up to 25 mm over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing complete all as specified and directed for one light/fan point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III Cable Make: Plaza /Havells/Finolex/RR Kabel/Polycab/L&T/Grandlay PVC Conduit make: Finolex/Polycab/Kalinga Premium/Surya/Plaza/Diplast

Description all as per Srl item No. 2.02 here-in-before but for socket outlet point 5 Amp on same board.

Description all as per Srl item No. 2.02 here-in-before but for socket outlet point 5 Amp on independent board.

Description all as per Srl item No. 2.02 here in before but for socket out let point 5 Amps on independent board

Description all as per Srl item No. 2.02 above but using 2.5 sqmm cable for 5 &15 Amps switch socket outlet (Power point) (independent) controlled by one switch .

Supply and fixing of switch piano, 5 Amps, flush type, single pole, one way, 230 volt, AC supply, ISI Marked complete all as specified and directed.

Supply and fixing of switch piano, 15 Amps, flush type, single pole, one way, 230 volt, AC supply, ISI Marked complete all as specified and directed.

Supply and fixing of socket outlet, 3 pin, 5 amps, 230 volts, flush type, ISI Marked complete all as specified and directed.

Supply and fixing of socket outlet, 16 Amps, 230 volts, flush type, ISI Marked complete all as specified and directed.

Supply and fixing of bell push, 5 Amps, flush type, single pole, one way, 230 Volts, 50 Hz, AC supply, ISI Marked complete all as specified and directed.

Supply and fixing of door bell electric, ding dong type, single phase, 230 volts, ISI Marked complete all as specified and directed.

Supply and fixing of ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and as directed.

Supply and fixing in repairs of fan regulator/ dimmer electronic step type, 230 Volts, 50 Hz, AC supply, suitable for ceiling fan, any type/make/sweep complete all as specified and as directed.

Supply and fixing of lamp holder/angle holder, PVC/polycarbonate type with back plate, suitable for batten fittings complete all as specified and as directed.

Supply and fixing of indoor decorative channel housing for fixing of LED tube rod, surface mounting, aluminium housing body in CRCA sheet, suitable for 18 watt LED tube, high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light fitting and fixing with two numbers PVC square box complete all as specified and directed. Make: Havells/Wipro/Philips

Supply and fixing of LED tube rod energy saving 18 watt, environment friendly, high efficient, T8 with aluminium extrusion heat sink for potimum performance with high luminous efficiency suitable for surface mounting battern fittings including taking down existing tube rod and removal complete all as specified and as directed. Make: Havells/Wipro/Philips

Supply and fixing of decorative surface mounting LED tube light fitting, with high efficient diffuser mirror light, aluminium housing, in CRCA body suitable and including 10 watt LED tube rod, high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light fitting and fixing the same with two Nos PVC square box including disconnecting and taking down existing light fitting and removal complete all as specified and as directed. Make: Havells/Wipro/Philips

Supply and fixing in replacement Bulk Head Fitting 10 Watt and connected with copper conductor cable of size 1.50 Sqmm, for fixing the light fitting complete all as specified & directed.

Material and labour for sheet metal enclosure, SPN, with two pin and earth plug and socket with one MCB, 20 Amps 'C' curve complete all as specified and as directed. Make: Indo Asian/Legrand/L&T.

Supply, insatallation, commissioning and testing of SPN distibution board, 8 way, double door, IP 43, conforming to IS 8623 including 100 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles complete all as specified and as directed. Make: Hager/Indo Asian/HPL/Legrand.

Supply and fixing of RCCB confirming to IS-12640-1 (IP-20) protection and overcurrent and short citcuit protection, ISI marked, 240 volts, 40 Amps, breaking capacity 10KA, 30 mA sensitivity, DP complete all as specified and as directed. Make:Indo Asian/Legrand/L&T.

Supply and fixing of MCB, single pole, 240 volts, 50Hz, breaking capacity, 6 to 32 Amps, ISI marked complete all as specified and as directed. Make: Indo Asian/Legrand/L&T.

Material and labour for sub main wiring with two single core FRLSH, PVC insulated unsheathed copper conductor cable, 4 sqmm, drawn in and including rigid non metallic PVC conduit, medium grade, 25 mm dia, concealed on wall or ceiling, with accessories with and including one additional 4 sqmm, PVC insulated, stranded copper conductor,FRLSH, green colour for earth continuity conductor including taking down old unserviceable sub main wiring of any type and making good the disturbed surface complete all as specified and as directed. Note- Three runs of 4.0 sqmm cable and one run of concealed conduit shall be measured as one unit. Cable make: Plaza/Polycab/RR Kabel/Finolex/Havells/Grindlay/L&T. PVC Conduit make: Finolex/Polycab/Kalinga Premium/Surya/Plaza/Diplast

Taking out old unserviceable earthing and material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron wire of size 4.0 mm as earthing lead (upto terminal point) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40 mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 1991(Part-I) complete all as specified and as directed.

Supply and fixing in replacement brackets for security light made up of 25mm dia, 0.90m long GI pipe, light grade, bent to required length and shape, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts including taking down existing unserviceable bracket and removal complete all as specified and as directed.

Supply and fixing of LED security light luminaire 30 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP66 protection, better optics for uniform distribtion with multiplte LEDs not less than 2 W each and driven at minimum 480mA and having optical grade polycarbonate lens with all accessories internally pre wired with input voltage range 150V to 270V including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specified and as directed. Make-JAQUAR//Havells/Philips/Wipro

Supply and laying of cable, LT, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 volts grade, with stranded aluminium conductor of size 4 core, 16 sqmm and laying in trenches complete all as specified and as directed. Make: Kalinga/RR Cable/Havells

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil for laying of cable complete all as specified and as directed.

Returning filling in, in soil, including spreading leveling watering and well ramming in layers not exceeding 25 cm each complete all as specified and as directed.

Removing excavated spoil/materials to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 above the starting point complete all as specified and as directed.

Material and labour for fine and dry sand, cushioning for underground cable, by providing a layers of sand 8cm deep before laying and 15cm deep after laying the cable including stretching the cable and punning sand cushioning complete all as specified and as directed. Note - Punned thickness of sand layer shall only be measured and paid to contractor.

Supply and lay bricks, common burnt clay, sub class "B', old size, laid in vertical direction to cable as cable protection complete all as specified and as directed.

Disconnecting and taking down old existing electric meters of any description and refixing and connecting electric meters in any position complete all as specified and directed at site.

Note:- Amount of credit of Rs. 69,611.00 for retrieved materials is mentioned in Schedule of Credit Page Nos.101 & 102 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Gupta Enterprises

M/S JAISANT CONSTRUCTION CO.

Puneet Sharma