Upgradation of Rest House at Chopadvav Ta.sagbara, Dist. Narmada.

Item No Quantity Unit Amount

(with brief specification and reference to book of specifications) (In figures)

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and lift.

Removing and scraping of old deteriorated plaster of any thickness from wall / R.C.C member

2 including stacking of serviceable material and disposal of unserviceable from site of work with all 155.00 Sq.mt 20.36

lead and lift.

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps including

stacking the materials with all lead and lift ( for any dia, of pipe).

Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing

tank etc.including stacking the materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats

5 architraves, holdfasts and other attachment etc. complete and stacking them within all lead and 26.00 Each 263.35

lift.(ii) Exceeding 3 Sq.M. in area.

Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm

@ Wt 1.094Kg / Rmt with colour anodized alluminium frame with 5 mm thick transparent bronze

colour tinted float glass with colour anodized alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for.window.

Providing and fixing window having extruded aluminum Colour anodized section frame main

outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track member size

122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical member of size 122.20mm x

31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x 18mm x 1.29mm @

kg/mt with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc

complete for window.

Providing 20mm thick cement plaster in single coat on single or half brick walls for interior

8 plastering upto floor two level and finished even and smooth in (i)Cementmortar 1:3 (1-cement:3- 155.00 Sq.mt 258.23

Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of required capacity

each with all necessary fittings and connection etc. complete on terrace.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with

bricks having crushing strength not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(iii) Inside dimensions 600mm x 850 mm and 450mm deep

for pipe lines with three or more inlets.

Providing and laying Vitrified tiles 8 to 10 mm thick , 36'' x 36'' in flooring treads of steps and

11 landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with 170.00 Sq.mt 1531.82

flush pointing in white cement.

Providing and laying marble stone slab flooring over 20mm (average) base of cement mortar 1:6

(1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with

gray cement slurry including rubbing and polishing complete. (A) Marble slab 25mm thick

(upto 10 ton)

Providing and fixing 30mm thick FACTORY MADE SOLID BOTH SIDE PRELAM PANEL

PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and

size of 19mm x 19mm for stiles, top and bottom rails. M.S. frame shall have a coat of steel primer

of approved makde and manufactures. M.S frame covered with 5mm thick heat moulded prelim

PVC ‘C’ channel of siz 30mm thickness, 70 mm width of which 50mm shall be flat and 20mm

shall be tapered in 45 degree Angle on either side forming stiles, and 5mm thick, 95mm wide

pream PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the

inner side ot form top and 20mm wide cross PVC sheet shall be provided as gap insert for top rail

and bottom rails. Panelling of 5mm thck both side prelim PVC sheet to be fitted in the M.S. frame

welded,sealed to the stiles and rails with 7mm (5mm + 2 mm) thick x 15mm wide PVC sheet

beading on inner side, and joined togeth with solvent cement adhesive. An additional 5mm thick

PVC strip of 20mm width is to be stuck on the interior side of the ‘C” chanel using PVC solvent

adhesive etc. complete as per direction of Engineeringin charge, manufacture’s specification and

Providing and fixing factory-made / high-density solid core flush door shutter, 35mm thick,

conforming to IS:2202 (Part-1), with seasoned hardwood frame/battens and blockboard core,

phenol-formaldehyde boiling water proof (BWP) resin pressed, faced with 1.0mm thick approved

decorative high-pressure laminate (HPL) on both sides, complete with teak wood lipping on all

four edges, necessary heavy-duty stainless steel hinges, screws, and rubber stoppers, fixed in

position as per architectural drawings and site instructions.

Description of Item Rate

Item No Quantity Unit Amount

(with brief specification and reference to book of specifications) (In figures)

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

15 approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every 20.00 R.mt 72.65

two metre C/C or shall be concelled as directed including necessary fittings etc. including testing

of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

16 approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every 21.00 R.mt 91.84

two metre C/C or shall be concelled as directed including necessary fittings etc. including testing

of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

17 approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every 38.00 R.mt 119.15

two metre C/C or shall be concelled as directed including necessary fittings etc. including testing

of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

18 approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every 52.00 R.mt 148.12

two metre C/C or shall be concelled as directed including necessary fittings etc. including testing

of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming

to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of

the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent cement including cost of all

materials.

20 Providing and fixing in position cowel went to pipes.(C) 100mm dia. 2.00 Each 505.17

Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self

cleaning design with C.I. screaed down or higned grating including cost of cutting and making

good the walls and floor 100mm inlet and 50mm outlet.(C) 100mm dia.

Providing and fixing wall-mounted cantilever type (wall-hung) white vitreous china Water Closet

(European type) with P-trap, including C.P. bolts, nuts, adjustable cast iron (C.I.) chair/bracket

frame (painted with two coats of enamel paint over a coat of primer), concealed flushing

cistern/valve with dual-flush mechanism, inlet-outlet gaskets, plastic/urea-resin soft-close seat

cover, cutting/chasing walls and making good the masonry and tile finishes to its original state,

testing, and commissioning complete as per the direction of the Engineer-in-Charge.

Providing and fixing 100mm size P or S trap for water closet squatting pan including jointing the

trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China.

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted

24 white including sutting holes and making good the same but excluding fittings.(A) Vitreous 4.00 Each 1486.04

China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws

down Bib Tap. (ii) 20mm dia.

26 Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia. 4.00 Each 663.43

Providing and fixing Urinal of approved quality including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm.

Applying two coats of putty & two coats of primer of approved brand and manufacture on new

28 wall surface to give an even shade including thoroughly brushing the surface free from mortar 614.00 Sq.mt 40.59

dropping and other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on

29 undecorated wall surface to give an even shade including throughly brushing the surface free from 614.00 Sq.mt 84.82

mortar droppings and other foreign matter and sand papered smooth.

Applying Piers damp proof painting (Two coat) with plastic emulsion paint of approved brand

and manufacture (Asian paint/Berger paint/ICI paint/ J &N paint/Nerolac) on old wall surface to

30 give an even shade after thoroughly brushing the surfaces free from mortar dropping and other 314.00 Sq.mt 1564.00

foreign matter and sand papered smooth(a) Plastic emulsion paint of approved brand and

manufacture (Asian paint/Berger paint/ ICI paint/J & N paint/Nerolac).

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an

31 required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of 314.00 Sq.mt 122.14

loose powdered materials.etc complete.

Description of Item Rate

Item No Quantity Unit Amount

(with brief specification and reference to book of specifications) (In figures)

Providing and fixing of False ceiling consisting of lamenated Gypsum Moisture-Resistant Board

of size 1220 mm x 2440 mm x 12 mm over' aluminium Tee's 1" x 1" size at 2' - 0" X 2' - 0"

center to center longituidinally and transversally & alminium angle of size 1" X 1" at cornes/ends,

including all accessries such as Parameter Channel,Intermediate Channel,Ceiling Section,Rawal

Plug,Sofit Channel,Connecting Clip,Metalic Screw,M6 Nut Bolt,Parameter Screw Wall,PVC

Gutka etc. complete in all respect, and as approved by the Engineer Incharge.

GYPSUM SHEET PARTITION Providing and fixing gypsum

partition works (100mm Thick) upto ceiling height consisting of G.I. frame and required board

bothside, including providing and fixing of frame work made of special section power pressed/

roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and

ceiling channel 75 wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and

ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm

length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide

having one flange of 34 mma and other flange 36 mm and 0.50 mm thick fixed vertically within

flanges of floor and ceiling channel and placed at a spacing off 610 mm centre to centre by 6 mm

33 dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with 11.00 Sq.mt 4328.00

suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre,

and fixing of boards to both sides of frame work by 25 mm long dry wall screws on studs, floor

and ceiling channels at the spacing of 300 mm centre to centre. Thes boards are to be fixed to the

frame work with joints staggered to avoid through cracks, M.S.fixing channel of 99 mm width

(0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two

boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to

a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm

x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's

specification and direction all complete.

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position

and applying a priming coat of red lead paint. (A)In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters,purlins

conneted to common rafters and the like.

Providing and fixing of Ridge flashing for roof panel shall be made out of 0.5 mm thick pre

coated GI sheet . The Precoated sheet shall be of minimum 240 mpa steel grade confirming to IS

14246:1995 and shall have zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7 microns

35 epoxy primer on both side of the sheet and polyester top coat 15-18 micron. The PPGI Sheet shall 144.00 Sq.mt 867.39

have plastic protective guard film of minimum 25 microns to avoid scratches during

transportation. The ridge shall be fixed to the steel members by pop rivet or self drilling/self

stitching fastners @ maximum 450 mm c/c along length of capping/flashing etc complete .

Sofa 3 seater Proving & Fixing 3 seater - Size: 125.0cm(W) x 77.5cm(D) x 74.5cm(H), Seat

height (SH): 41.5 cm. LH/RH Side Frame: The LH/Rh side frame is fitted to the two ends of the

seat/back mounting frame to form the leg assembly. It is made of SS J4 Grade tube Dia 4.44cm x

1.5mm thick. Seat/Back mounting Frame: the seat/back mounting frame assy. Holds the two side

frames together. The mounting frames 2 nos. Are used to connect the side frames. The mounting

frame is made of MS. E.R.W. Tube 5.08+_0.03cm(dia) x 3.15+_0.0252cm(thk) black painted.

36 The seat/back is mounted on 4.0+_0.03cm x 2.0+_0.02cm x 0.2+_0.016cm M.S. Rectangular 3.00 Nos. 51767.25

tube which is welded on the beam of seat/back mounting frame. Seat/back Assembly : The

Seat/back Assemblyconsists of 1.2+_0.1cm thk plywood insert with polyurethene foam having

density 45 +_ 2 kg/m3 and the hardness of the P.U. Foam = 18 to 22 kg on Hampden m/c for

25% compression of the foam. The complete moulded seat/back assembly is covered with a

replaceable fabric upholstrey. The rate shall include all materials, hardware and labour etc.

complete as per instruction of engineer-in charge and consultant.

ROLLER CURTAINS

Providing and fixing of approved quality roller blinds using phifer fabric of premium grade, with

roller tube, bottom bar leveller made of extruded aluminium alloy an Idler, Insert Type- Brackets,

PVC chain etc. all complete at all floor and heights as per approved specification. Roller Tube

Control, Clutch, Idler Side by side or single Roller Tube of extruded Aluminium 38mm inner dia

- 41mm outer dia minimum wall thickness of 1.6mm. Roller blind - roller blind fabric should be

37 made up of 35% FibreGlass, 65% PVC, it should have specific low emissivity treatment and lead 12.00 Sq.mt 5571.00

free with Greenguard gold certification. It should have 3% to 5% openness, fabric thickness

should be 0.43mm, mesh weight approx 400 gms/sqmtr. It should cut UV rays, with antimicrobial

properties preferably with Microban. The fabirc should be Flame retardant and Lead Free. It

should be Green Guard certified with Gold Standard for low chemical emissions for indoor use.

(Basic rate of Roller blinds - 85 rs/sq.ft.) including all accessories, material, labour, installation

etc. and complete the work satisfactorily as per instruction of Architect or Engineer-in charge.

Description of Item Rate

Item No Quantity Unit Amount

(with brief specification and reference to book of specifications) (In figures)

KITCHEN CABINET Complete turnkey execution of

an L-shaped modular kitchen cabinet framework measuring 4.85 × 8.53 feet. The external shutters

and doors are fabricated using 100% waterproof and termite-proof premium PVC solid sheets.

The internal storage architecture comprises 7 modular wire baskets (6 units of 20"x20" and 1 unit

of 20"x22") running smoothly on heavy-duty telescopic trolley channels. The package includes

premium 8-inch stainless steel handles, secure magnetic catches, high-grade installation screws,

and a standard washbasin setup. The final pricing is fully inclusive of all material costs, hardware

supplies, and expert carpenter labor charges.

Demolition of terrace including stacking of serviceable materilas and disposal of unserviceable

materials with all lead and lift.(i) Brick tile covering.

Cutting out cracks roof terrace to V-Section cleaning out and filling solidly with a hot mixture of

bitumen and clean dry sand (1:1 by weight).

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken

pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to

bring mortar creme out upto surface using white cement including rounding off junctions and

extending them upto 15 cm along the wall,clearing with water and oxalic acid etc. as directed.

Chasing / cutting the brick wall, concrete blocks or stone masonry for fixing / laying the

42 concealed conduit pipe up to 30mm diameter, including making good the surface with cement 144.00 Rmt 134.00

mortar (1:3) to match the original surface, removing the debris etc. complete.

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in below type of pipe

erected with 6A Modular type switch / bell push & accessories and earth continuity of following

43 type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with 73.00 Pt. 534.00

textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.(a) with medium class Rigid PVC

pipe and accessories erected flushed on wall/ceiling complete.Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in below type of pipe

erected with 6A Modular type switch and hum free EME four or more step type electronic fan

regulator with separately mounted and accessories with earth continuity of following type erected

on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.(a) with medium class Rigid PVC pipe and accessories flushed on

wall/ceiling complete.Cat. III

Point wiring for independent PLUG with following size mains earth wire of 1.5 sq.mm (green)

both are of ISI marked 1.1 kV grade FRLS PVC insulated multistrand copper wires up to 10 mt

length, in following below of pipe erected complete with ISI marked 3 / 5 Pin socket and tissino

45 type switch erected with earth continuity connection erected on Metal / PVC/Wooden box 18.00 Pt. 565.00

covered with 3 mm thick PC(Polycarbonate) / Acrylic/Laminated sheet.[B] 6/16A Plug and

amp switch with 2-2.5 sq. mm Cu. Mains from mcb d b boards.(a) with medium class Rigid PVC

pipe and accessories erected flushed on wall/ceiling complete.

Point wiring for on board looped PLUG with tissino type single pole ISI marked Switch and

Socket erected with necessary connections erected on wooden /Metal/ PVC Box covered with

mm thick PC(Polycarbonate) /Acrylic sheet for open / concealed wiring for following size.[A] For

Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

47 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green 144.00 Mtr 127.00

colour for earth continuity of following size.(A) With medium class Rigid PVC pipe and acces.(d)

3 wire 2.5 sq. mm.

Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

48 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green 53.73 Mtr 103.00

colour for earth continuity of following size.(A) With medium class Rigid PVC pipe and acces.(c)

3 wire 1.5 sq. mm

Providing and erecting Inverter based approved make Cassette type split air-conditioning unit

consisting of condensing unit with fan motor, hermetically sealed scroll/rotary compressor with

49 accessories etc. duly connected separately erected evaporating unit and blower motor with its 3.00 Each 87925.00

accessories by Eco friendly Green gas charging & Internal copper wiring & Remote control (

star and above of current year) with necessary core cutting.(B) for 2 ton capacity

Providing & erecting Approved make Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C.50 Hz 1200 mm sweep complete having 3 blades aluminium body and

blade sets having ornamental design shanks , canopy erected with earthing. [ Make shall be

approved by Engineer in Charge]

Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts erected

with necessary hook of 10 mm M.S. Round Bar.

Description of Item Rate

Item No Quantity Unit Amount

(with brief specification and reference to book of specifications) (In figures)

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20(i) 5-9 watts,Surge-2 kV.Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

LED Strip Light.(i) Minimum 4.8W-120 LED per meter (2 wire, IP-65) with non integral suitable

Driver complete.Cat-lll

Supplying and erecting horizontal / vertical mounting type storage water heater with copper

container housed in M.S./S.S./ABS body insulated with glass wool/puff complete with heating

54 elements,adjustable thermostats 300C to 850C, indicating lamp, safety valve, fusible plug, 2.00 Each 15045.00

etc.complete erected with coach bolts, nuts. washers & cementation.(E)50 Ltr. with 2 KW.

heating element.Premium Category

Providing and applying exterior acrylic texture finish in a scratch/grooved pattern (e.g., Asian

Paints Apex Duracast Fine/Coarse or equivalent) on a thoroughly prepared exterior wall surface.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick

with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved

design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the

joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone

58 aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) 43.00 Cu.mt 3591.22

Foundation and Plinth.

Providing TMT Bar FE 550D reinforcement for R.C.C. work including bending, binding and

placing in position complete upto floor two level.

including watering, ramming and consolidating etc. complete.

A standard 6-seater rectangular dining table measures 1.5 to 1.8 meters long, 0.9 to 1.0 meters

61 wide, and 0.75 to 0.76 meters high, balancing spatial efficiency while seating two people on each 1.00 Nos. 62100.00

long side and one at each head.

Providing Tapi-Karjan Link Pipeline Lift Irrigation Scheme a 4.00 meter x 2.00 meter (13.12 ft x

6.56 ft) artwork is exceptionally large. Framing a piece of this scale requires commercial-grade

structural materials rather than standard picture-frame mouldings to prevent the glass from

bending or shattering under its own weight.

Providing a unplasticized polyvinyl chloride (uPVC) cupboard unit with a width of 2.20 meters

(2200mm) and a height of 1.15 meters (1150mm) is a wide, low-profile furniture piece. This

63 15.00 Sq.mtr 21105.00

layout is typical for a credenza, outdoor patio sideboard, laboratory storage unit, or hallway

Providing videography on the ocassion of function or for on going construction work including

dubbing, titeling etc. complete including cost of cassette/CD.(b) Up to 4.00 hours

Total Amount (in Fig.)

Total Amount (in Fig.)

Executive Engineer

Ver-II Project Division, Vyara.