SUPPLY AND INSTALLATION OF 1 NOS SUBMERSIBLE PUMPING PLANT AND RELATED ELECTRIFICATION WORK IN TUBEWELL NO.-2 AT SPINNING MILL CAMPUS, ETAWAH

Supply and Installation of Submersible Pumpset suitable for Cool & Clear water with bronze impeller and built in Non-Return Valve and suitable to run on 400 V 3 ph Hz AC supply at 2900 RPM Speed having three Meters Flat Cable The detailed specifications are as under :- Capacity in lpm ………………1000 Lpm Total Head in Mtrs ……………58 Mtr. Model …………………BODN302/8+UMAI-150 O.D. Pump Set in MM ………144 No of Stages …………………08 Pump Out let size in MM ….…75 H.P. Motor ……………………20 Method of Starting ……………S.D. Size of Flat Cable in Sqmm 2 X 3 X 4 SQMM [MAKE: KSB/KIRLOSKAR/CROMPTON]

Starter & Control Pannel

Supply and Installation of Cubical dust & vermin proff switch board panel wall mounting type And comprising fo the following and complete with internal wiring. a) 100 Amp. TPN Switch Fuse Unit panel mounted type in open execution complete with HRC fuses and of make Siemens/L&T/Crompton of suitable size. 01 Nos. b) Voltmeter flush mounting type 500V in 100mm dial and of reputed make with Voltmeter Selector Switch. 1 No c) Ampere meter flush mounting type of suitable range and of reputed make. 1 No d) Indicating Lamps Set of 3 Nos. 1 Set. e) Toggle Switches Set of 3 Nos. 1 Set. f) Instrument fuses Set of 3 Nos. 1 Set. g) Single Phasing Preventor Minilec 1 No. h) Power Capacitor Asian/GE/Siemens make of suitable 5 KVAR. 1 No. (all equipments should be of approved PWD Makelist.)

Supply and Laying of Submersible cable 1x3x4Sqmm [MAKE: HAVELLS/POLYCAB/KEI/R.R. CABLE]

Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing (This will apply for earthing of poles also). (all equipments should be of approved PWD Makelist.)

Supply and Fixing of Danger board

SUPPLY AND FIXING OF FOLLOWING MAIN PIPING & VALVES

C.l.D.F, siuice valve 150 mm dia (Make kirloskar/I.V.C)

C.l.D.F, Non Return valve 150 mm dia (Make kirloskar/I.V.C)

C.I.D.F. Tee for 150.mm.dia.