REPAIR /REPLACEMENT AND DAY TO DAY MAINTENANCE OF INTERNAL WIRING, LIGHT FITTING, SWITCH GEARS, FTL/CFL FITTINGS TO LED FITTINGS AND REPAIRS /REPLACEMENT OF AIR CONDITIONERS, REFRIGERATORS, WATER COOLERS, COOLING APPLIANCES WITH RELATED CONNECTED WOR

Amount

Note 1: (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket etc; and making good disturbed surfaces of walls, ceilings etc

M & L for point wiring with 1.5 sqmm (nominal area) FRLSH, PVC insulated stranded copper conductor single core including non metalic PVC conduit medium grade of size not less than 20 mm dia concealed in wall, pressed steel concealed terminal boxes of required size and with top cover 3 mm thick of plastic laminated sheet of reqd colour, painting terminal boxes inside and out side with one coat red oxide primer complete with all accessories and all as specified including 1.5 Sqmm FRLSH PVC insulated sheathed multistranded copper earth conductor to common earth and connected to earth dolly for fan / light / exhaust fan/ bell point controlled by one switch. Note:- (i) Cost of PVC conduit, steel terminal boxes, plastic laminated sheet cover etc; are deemed to be included in the quoted rate. (ii) M&L for cutting chases on walls / ceiling and making good disturbed surfaces including finishing with cement mortar (1:3) etc; are deemed to be included in the quoted rate.

All as per item 2.0 above but for one bell point controll by one 5/6 Amp piano type bell push complete all as specified and directed.

All as per item 2.0 above but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and directed.

All as per item 2.0 above but for 3 pin 16 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and directed.

All as per item 2.0 above but for 5 Amps socket point on the same board controlled by one switch complete all as specified and directed.

All as per item 2.0 above but for one light point controlled by two, two way switch with 1.5 sq mm copper conductor cable complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (nominal area) PVC insulated and sheathed multistranded copper conductor cable FRLSH 1100 volts grade drawn in and including PVC casing and capping of size 25-32 mm fixed to wall ceiling including PVC closed recessed boxes ISI marked with 3.00 mm thick plastic laminated sheet top cover for mounting of switches, sockets etc incl 1.50 sqmm (nominal area) PVC insulated and sheathed multistranded copper conductor cable FRLSH 1100 volts grade single core earth continuity conductor connected to common earth dolly all as directed and specified for the followings.

One light /fan point controlled by one 5/6 Amp piano type switch

All as per item Ser No 8.0 above but for one bell point controll by one 5/6Amp piano type bell push complete all as specified and directed.

All as per item Ser No 8.0 above but for One 3 pin socket outlet 5 Amps on same board.

All as per item Ser No 8.0 above but for One 3 pin socket outlet 5 Amps on indpendent board

All as per item Ser No 8.0 above but with 2.5 sqmm single core multistranded copper conductor FRLSH cable for 3/5 pin 15 Amp socket outlet on independent board.

All as per item Ser No 8.0 above but with 2.50 sqmm single core multistranded copper conductor cable for 4x1 number 3/5 pin 5/6 Amp socket outlet on independent board. (Note switch socket will be measure and paid seperately).

All as per item Ser No 8.0 above but with 2.50 sqmm single core multistranded copper conductor cable for 2x1number 3/5 pin 5/6 Amp socket outlet on independent board. (Note switch socket will be measure and paid seperately).

All as per item Ser No 8.0 above but for one light point controlled by two, two way switch with 1.5 sq mm copper conductor cable complete all as specified and directed.

M & L for switch piano (flush button type) single pole, one way, 5 Amps complete all as specified and directed.

M & L for switch socket combination 2 in one, 5 pin , 5/6 Amps, 240 Volts flush type,complete all as specified and directed.

M & L for switch socket combination 2 in One , 5/6 pin, 5/6/16 Amps flush type complete all as specified and directed.

S & F socket out let, 5 pin 5 Amps flush type complete all as specified and directed.

S & F switch flush type, 5 Amps, SP, two way complete all as specified and directed.

S & F switch bell push flush type 5 Amps complete all as specified and directed.

S & F call bell, Ding dong type, AC 230 Volts single pole complete all as specified and directed.

S & F ceiling rose polycarbonate type three terminals complete all as specified and directed.

S & F step type electronic fan regulator 120 watt single pole 240 Volts complete all as specified

Supply & Fix (S&F) in replacement of Lamp holder PVC/Polycarbonate type with cord grip cap suitable for pendent fitting complete all as specified and directed

S&F in replacement LED BALL LAMP of 10W with Lumen output 950 lm and Colour Temp 6500K B22 type fitted suitable for PVC /Poly Carbonate type complete all as specfied and directed.

S&F in replacement WW LED candle LAMP of 3W with Lumen output 240 lm and Colour Temp 3000K E14 type fitted suitable for PVC /Poly Carbonate type complete all as specfied and directed.

S&F in replacement LED batten luminaires, 20 watts, lumen output not lessthan 2000 (4 feet), made of anodised extruded aluminium housng, with high transmissivity diffuser, high lumen output, with suitable integrated electronic driver, and operated in single phase, 230 volts, 50HZ, all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of size 23/0.0076, from connector and ceiling rose, complete all as specified and directed. Make Havells/Bajaj/CG

S&F in replacement mirror light batten type 5/9/10W 230V AC, 50Hz, Pf >0.98, THD <10% on wall complete all as specified and directed by Engineer in charge. Make Havells/Bajaj/CG

S&F in replacement of LED bulk head wall light fixture 10W complete all as specified and as directed. Make Havells/Bajaj/CG

Supply and fixing in replacement of LED focus/track wall light fixture 5-10W of warm/multi coloured complete all as specified and as directed by Engr in charge. make as per sample

Supply and fixing in replacement decorative wall light fixture made up of polycarbonate suitable for 15W/10W retrofit CFL/LED (spira B-22 base) complete all as specified and as directed. Cat Part No. LHDL02160099 CITY 1 of make Havells or equivalent Make Bajaj/CG.

S&F in replacement decorative wall light fixture made up of polycarbonate suitable for 15W/10W retrofit CFL/LED (spira B-22 base) complete all as specified and as directed. Cat Part No. LHDL02160099 CITY 2 of make Havells or equivalent Make Bajaj/CG.

S&F in replacement Recess mounting 2' x 2', LED light 24W, having LED driver /surge protection device luminaire bottom opening SS frame, dust free and zero maintainence complete all as specified and as directed. Make; havells/CG/Bajaj

S&F in replacement Recess mounting 2 x 1', LED light 28W, having LED driver /surge protection device luminaire bottom opening SS frame, dust free and zero maintainence complete all as specified and as directed. Make; havells/CG/Bajaj

S&F in replacement Recess/ceiling mounted round glow type LED light 10W down lighter with ABS housing, pc opal diffuser with independent electronic driver, white/warm, dust free and zero maintainence complete all as specified and as directed by Engr in charge. Cat Part No. GLOWDLR10WLED857S of make Havells or equivalent Make Bajaj/CG.

S&F in replacement surface mounted round type LED light 10W down lighter with ABS housing, pc opal diffuser with independent electronic driver, white/warm, dust free and zero maintainence complete all as specified and as directed by Engr in charge. Cat Part No. GLOWDLR10WLED857S of make Havells or equivalent Make Bajaj/CG.

S&F in replacement LED tube rod 18 W with high efficacy, lumen output not lessthan 105 lm/W (4 feet), made of crystal glass, high lumen output, and operated in single phase, 230 volts, 50HZ, suited for installation in existing tubelight luminaire with G13 lamp holders complete all as specified and directed. make Havells or equivalent Make in Bajaj/CG

S&F in replacement ultra bright LED PLL with high efficacy 18 W operated in single phase, 230 volts, 50HZ, suited for installation in existing 2G11 lamp holders complete all as specified and directed. make Havells or equivalent Make in Bajaj/CG

S&F in replacement LED batten with microwave motion technology luminaires, 20 watt, lumen output not lessthan 2000 (4 feet), made of anodised extruded aluminium housing, with high transmissivity diffuser, high lumen output, with suitable integrated electronic driver, and operated in single phase, 230 volts, 50HZ, all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of size 23/0.0076, from connector and ceiling rose, complete all as specified and directed. Make Havells/Bajaj/CG

S&F in replacement new generation energy saving and environmental friendly long life 15W LED wall street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having top Opening seperate driver compartment with IP66 protection and impact resistance of IK07 including necessary brackets (made out of 25mm bore GI pipe light grade appx 0.6 meter long bend to shape) nuts, bolts, etc fixed on walls with MS clamp complete all as specified and directed.

Supply & Fix in replacement new generation energy saving and environmental friendly long life 25W LED wall street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having top Opening seperate driver compartment with IP66 protection and impact resistance of IK07 including necessary brackets (made out of 25mm bore GI pipe light grade appx 0.6 meter long bend to shape) nuts, bolts, etc fixed on walls with MS clamp complete all as specified and directed.

M & L for detecting faults in LT electric supply distribution system in Md Accn/OTM in the NAA and rectifiying the defects for restoring supply including replacing of unserviciable defective electrical accessories. Note :- (i) Spares shall be measured and paid under respective item of schedule . (ii) Essential material like, complain slip book, insulation tape, screws, wodden/plastic gutka and all tools required for carrying out the works and insutruments to the defect fault shall be deemed to be included in the quoted rate.

Taking down ceiling fan any type/ size from hook and dismantling cable and blades and bring in to contractor store for repair and hanging ceiling fan in position after repair, greasing etc. with existing flexible copper cable complete all as directed. (rewinding of fan, painting and spare parts required shall be measured and paid separately)

Taking down exhaust fan any type/ size from wall and dismantling sealing cable and dismantling blades and bring in to contractor store for repair and fixing exhaust fan in position after repair, greasing etc. with existing flexible copper cable complete all as directed. (rewinding of fan, painting and spare parts required shall be measured and paid separately)

M&L for rewinding of ceiling fan 1200/1400 mm sweep after dismantlingand taking out the burnt winding coils and rewinding with super enamelled copper winding wire of suitable size and gauge including insulation, Varnishing, drying etc complete and refixing the same after rewinding and testing complete all as specified and directed.

M&L for rewinding of exhaust fan 280 to 450 mm sweep after dismantlingand taking out the burnt winding coils and rewinding with super enamelled copper winding wire of suitable size and gauge including insulation, Varnishing, drying etc complete and refixing the same after rewinding and testing complete all as specified and directed.

Supply and Fixing brass bush for ceiling fan / Exhaust fan as existing size complete all as specified and directed.

Supply and Fixing bearing suitable for ceiling fan 1200mm to 1400mm /exhaust fan of bearing No- 6201/6202 complete all as specified and directed.

S & F capacitor 2.5 MFD for ceiling fan. complete all as specified and directed.

S & F capacitor 3.15 MFD for ceiling fan complete all as specified and directed.

S & F capacitor 4.0 MFD for exhaust fan complete all as specified and directed.

S & F rubber real with bolts, nuts and clamps of suitable for ceiling fan complete all as specified and directed.

S&F PVC insulated flexible copper cable 3 core of size 23/0.0076 complete all as specified and directed.

M&L for painting of ceiling fans with blade complete insitu with synthetic enamelled paint by spraying includingfilling cavities with filler, one coat after cleaning all dust etc all as specified and directed.

Taking down carefully water heater storage type of any capacity from its position for repair/ overhauling by disconnecting complete electric/water supply connections, taking out geyser assembly repairing by minor welding of inner tank re-assembling the geyser and refixing the same by connecting electric / water supply connections and testing complete all as specified and directed. Note: (spares will be measured and paid separately)

S&F in replacement old u/s element and fixing of new heating element of capacity 1.5/2 KW of any type (as per sample) complete all as specified and directed. Make: Bajaj/CG/USHA/JAGUAR/as per sample.

Supply and fixing in replacement old u/s thermostate for geyser and fixing of new thermostate adjustable between 30 degree to 90 degree celcius of any size /type as per existing (ISI marked) complete all as specified and directed.

Supply and fixing in replacement old u/s indicator lamp and fixing of new indicator lamp of suitable capacity including its electrical connection complete all as specified and directed.

Supply and fixing in replacement of PVC connection heavy duty 450mm long with 2 nuts brass at both ends suitable for hot water for GI pipe 15 mm dia complete all as specified and directed.

M&L for MS anchor fastener heavy duty 12mm dia 10 cm long all as directed.

S&F in replacement switch piano (flush button type) single pole, one way, 5 Amps complete all as specified and directed.

S&F in replacement switch socket combination 2 in one, 5 pin 5/6 Amps, 240 Volts flush type,complete all as specified and directed.

S&F in replacement switch socket combination 2 in One , 5/6 pin,5/6/16 Amps flush type complete all as specified and directed.

Supply and fixing in replacement socket out let, 5 pin 5 Amps flush type complete all as specified and directed.

S&F in replacement switch flush type, 5 Amps, SP, two way complete all as specified and directed.

S&F in replacement switch bell push flush type 5 Amps complete all as specified and directed.

S&F in replacement call bell, Ding dong type, AC 230 Volts single pole complete all as specified and directed.

S & F call bell, buzzer type, AC 230 Volts single pole complete all as specified and directed.

Supply and fixing in replacement ceiling rose polycarbonate type three terminals complete all as specified and directed.

Supply and fixing in replacement step type electronic fan regulator 120 watt single pole 240 Volts complete all as specified.

Supply & Fix in replacement of Lamp holder PVC/Polycarbonate type with cord grip cap suitable for pendent fitting complete all as specified and directed.

Supply in replacement plug top, AC 230 Volts, 6 Amps complete all as specified and directed. Make: Anchor/ Plaza

Supply in replacement plug top, AC 230 Volts, 16 Amps complete all as specified and directed. Make: Anchor/ Plaza

Supply in replacement of hylam sheet cover 3 mm thick for fixing switches, sockets, regulators etc of size 4 x 4 (Inches) on existing metal box complete all as specified and directed.

Supply in replacement hylam sheet cover 3 mm thick for fixing switches, sockets, regulators etc of size 7 x 4 (Inches) on existing metal box complete all as specified and directed.

Supply in replacement hylam sheet cover 3 mm thick for fixing switches, sockets, regulators etc of size 8 x 6 (Inches) on existing metal box complete all as specified and directed.

Supply in replacement hylam sheet cover 3 mm thick for fixing switches, sockets, regulators etc of size 10 x 12 (Inches) on existing metal box complete all as specified and directed.

Supply in replacement of PVC conduit medium grade with fittings, ISI marked, 20 mm size complete all as specified and directed.

Supply in replacement of PVC conduit medium grade with fittings, ISI marked, 25 mm size complete all as specified and directed.

Supply in replacement of PVC casing & capping with fittings, ISI marked, 20 mm size complete all as specified and directed.

Supply in replacement of PVC casing & capping with fittings, ISI marked, 25 mm size complete all as specified and directed.

Supply in replacement of PVC switch boards, closed recessed suitable for surfaces, sizes 4 X 4 (Inches) complete all as specified and as directed.

Supply in replacement of PVC switch boards, closed recessed suitable for surfaces, sizes 4 X 7 (Inches) complete all as specified and as directed.

Supply in replacement of PVC switch boards, closed recessed suitable for surfaces, sizes 8 X 6 (Inches) complete all as specified and as directed.

Supply in replacement of PVC switch boards, closed recessed suitable for surfaces, sizes 8 X 10 (Inches) complete all as specified and as directed.

Supply in replacement of PVC insulated copper conductor cable, FRLSH, single core, 1100 Volts, 1.5 Sq mm with colour coding complete all as specified and directed.

Supply in replacement of PVC insulated copper conductor Cable, FRLSH, single core, 1100 Volts, 2.5 Sq mm with colour coding complete all as specified and directed.

Supply in replacement of PVC insulated copper conductor Cable, FRLSH, single core, 1100 Volts, 4.0 Sq mm with colour coding complete all as specified and directed.

Supply in replacement of PVC insulated copper conductor Cable, FRLSH, single core, 1100 Volts, 6.0 Sq mm with colour coding complete all as specified and directed.

Taking down burnt/unserviceable sub main wiring any size complete and making good disturbed surfaces of walls all as specified and directed.

M & L for submain wiring with two runs of PVC insulated multistranded,FRLSH copper coductor of size 6 Sqmm cable single core 1100 Volts Grade and one run of earth continuity conductor cable of 6 Sq mm strand cable drawn in existing PVC surface conduite complete all as specified and as directed.

All as per item no 85 above but in PVC surface Cassing N capping complete all as specified and directed.

Supply and draw submain wiring with two single core 6 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor in concealed PVC conduit including 6 sq mm multi-strand FRLSH PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete. Note:- Cost of PVC conduit, cutting chases on walls and making good disturbed wall surfaces including finishing with cement mortar (1:4) matching with the existing shade / tint are deemed to be included in the rates quoted.

M&L for sub main wiring with three single core 10 Sqmm FRLSH copper conductor cable PVC insulated and unsheathed stranded incl drawing through concealed PVC conduit non metallic 30 mm dia with all accessories like bend,Tee , junction concealed on wall incl 01x 10 Sqmm FRLSH PVC insulated unsheathed copper conductor cable as earth wire all as specified Note- Three run of 10 sq mm and one run of 10 sq mm PVC insulated coppwer wire and one run of PVC conduit shall be measured as one unit

Taking down main switches and DBs of any type and make including wooden board/ junction box.

Supply and fixing single pole and neutral enclouser with a two pin and earth plug and socket complete with one pole MCB 20 Amps complete all as spd and directed .

Supply & fixing in replacemant for sheet metal enclosure for DBs SPN 4 way 240 V complete double door, flush mounted all as specified and as directed

M&L for sheet metal double door enclosure for MCB DBs SPN 6 way 240 V, complete flush mounted all as specified and as directed.

Supply and fixing in replacement sheet metal enclosure double door for MCB DBs SPN 8 way 240 V, complete flush mounted all as specified and as directed.

All as per item no 92 above but SPN 12 ways 240 volts complete all as specified and directed.

S&F sheet metal enclosure for multi phase out going suitable for mounting 63 Amps FP MCCBs. Vertical distribution board 4 ways mounting as incommer with 200 Amp rared bus bar, IP- 42 Protection ,double door conceled/ wall mounting suitable for mounting MCBs/Isolators complete all as specified and as directed.

M&L for Isolator single pole 5 to 40 Amps, 240 volts complete all as specified and directed.

M&L for Isolator DP 32/40 Amps, 240 volts complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Metre below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 15 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as shown on electrical plate No. 3 of SSR part - I complete alll as specified and directed.

Taking out old GI pipe of any size form trenches/wall/pole complete all as specified and directed.

M&L for 40mm dia GI tubing light grade with all necessary fittings laid in trenches fixed to walls/poles/under road/floor etc for cable protection with suitablke clamp, complete all as specified and directed.

Taking down old recess mounting 2' x 2', LED light luminaire 24-36W and refixing same after repair or by replacing required item of reccess light complete all as specified and as directed. (Note: LED driver and surge protection device will be measured and paid separately)

Supply and Fixing in replacement of LED Driver 24-36W with surge protection device of recess mounting 2' x 2', LED light luminaire, IP65, complete all as specified and as directed. Make- CG Cat Pt No- SODRVES-36-600-25W & SRPS-5K-440

Supply and fixing in repair electronic LED driver for wall security light of 15/25 Watt LED complete all as specified and as directed. Make: as per sample

S & F Modular switch 1 way 10 A 1 module

S & F Modular switch 2 way 10 A, 1 module

S & F Modular Fan step regulator, 120W - 2 module

S & F Modular bell push 6 A 1 module

S & F Socket 6 A 2/3 pin combined 2 module

S & F Socket 6 A /16 A-2/3 pin combined 2 module

S & F for metal flush box 10 module

S & F for metal flush box 9 module

S & F for metal flush box 7 module

S & F for metal flush box 6 module

S & F for metal flush box 4 module

S & F for metal flush box 3 module

S & F for white cover plate with frame 10 module

S & F for white cover plate with frame 9 module

S & F for white cover plate with frame 7 module

S & F for white cover plate with frame 6 module

S & F for white cover plate with frame 4 module

S & F for white cover plate with frame 3 module

Taking down window/split type AC capacity 1.5 ton for through checking and servicing of indoor/out door unit, replacing the defective part of its smooth functioning. taking out compressor unit from the unit duly cutting the copper tubings and taking out the same for replacement all as specified and directed and refixing the same after servicing and replacement of defective/wornout part. (Notes Spare parts will be measured and paid separately under respective items of Sch)

All as per srl item No-122 above but 2.0 Ton

Supply and fixing of hermetically sealed compressor of 1.5 ton capacity with all accessories duly connecting and soldering/ brazing of copper tubings etc and leak testing and charging of gas etc. complete including testing all as specified and directed.

All as per srl item No-122 above but 2.0 Ton complete all as specifiefd and directed.

Supply and filling of refrigerant gas R-22/410a for air conditioner 1.5 & 2.0TR

Supply and filling refrigerant gas 134a for refigrator, deep freez and water cooler of any capacity

S&F in replacement PCB (as per existing modle/make) suitable for 1.5/2.0 Ton split or window type AC all as specified and directed.

Taking down the defective/ burnt blower motor from the window/ split type AC duly disconnecting wires and blower and fan blade taking to civil work shop/contractor store and repair, rewinding with super enamelled copper winding wire of suitable size and gauge after cutting and taking out burnt winding wire and re-fixed after repair and re-conected electrical connection and blades & blower in window/ split AC including testing all as specified and directed.

Supply and fixing in replacement of copper tubing suitable for existing bore and size.all as specifiedand directed.

S&F in replacement remote suitable for 1.5/2.0 Ton AC as per sample.

S&F in replacement running capacitor of capacity 36 to 50 MFD. Make-UNIVERSAL/USHA/ARISTO

S&F in replacement dual capacitor of capacity 36 to 50 MFD. Make-UNIVERSAL/USHA/ARISTO

S&F in replacement Capacitor of capacity 2 to 6 MFD. Make-UNIVERSAL/USHA/ARISTO

S&F in replacement Capacitor of capacity 4 to 6 MFd. Make-UNIVERSAL/USHA/ARISTO

S&F in replacement thermostat for window type AC/Split type AC of capacity 1.5 TR/ 2.0TR. Make- Rentero/Danfos/Indfos

S&F in replacement of fan blade for window type AC of capacity 1.5 TR/ 2.0 TR.

M&L in replacement of front grill suitable for window type AC 1.5 TR as per sample.

S&F air filter of suitable size for 1.5/2.0 Ton window ACs of any capacity

S&F air filter of suitable size for 1.5/2.0 Ton split ACs of any capacity

S&F in replacement indoor unit suitable for 1.5 TR capacity split AC make-Voltas/LG/Videocon/ or as per site requirement.

S&F in replacement of out door unit suitable for 1.5TR capacity split air conditioner of make Votas/LG/Samsung of as per site requirement.

Taking down and complete servicing of walk in freezer refregeration unit air cooled with semi hermatic condensing units of make Blue star complete all as specifiefd and directed.

Supply and filling of refrigerant gas R-404A for walk in freezer refregeration unit air cooled with semi hermatic condensing unit complete all as specifiefd and directed.

Supply & Fixing in replacement three phase relay (as per existing model/make in control/display panelof walk in freezer) complete all as specified and directed.

Supply & Fixing in replacement 3/4 phase power contactor (as per existing model/make L&T model NC1 1801 in control/display panelof walk in freezer) complete all as specified and directed.

Supply & Fixing in replacement 3/4 phase aux contactor (as per existing model/make L&T model NC6 0901 in control/display panelof walk in freezer) complete all as specified and directed.

Taking down unserviceable water cooler of capacity 40/80,120/150 Ltr capacity by disconnecting all electrical and water connection for servicing of water cooler any capacity including checking all parts, cleaning the water tank, tightining any loose parts and replacement of defective wiring kit, split pins, nuts bolts and washers etc complete all as specified and directed at site. All spare parts required for replacement shall be measured and paid separately under respective items of sch)

Supply and fixing of hermetically sealed compressor for water cooler of 40/80 ltrs capacity with all accessories duly connecting and welding/ brazing with copper tubings etc and leak testing and charging of gas etc. complete including testing all as specified and directed. Make of compressor -Kirloskar/Tecumseh

All as above item no. 150 but for 120/150 Ltr/hrs

Taking down the defective/ burnt condencer motor from the water cooler 40/80 Ltrs capacity duly disconnecting wires and fan blade taking to civil work shop and repair, rewinding with super enamelled copper winding wire of suitable size and gauge re-fixed and conected electrical connection and bladesin water cooler including testing all as specified and directed .

All asper above item no. 152 but for 120/150 ltrs capacity

S&F in replacement, relay for water cooler of capacity 40-150 ltrs/hr. Make- Rentero/Indfos

S&F in replacement thermostate for water cooler of capacity 40-150 ltrs/hr. Make- Rentero/Indfos

Supply and fix in replacement door rubber inner liner (magnetic)suitable for water cooler capacity 40 Ltrs.

Supply and fix in replacement door rubber inner liner suitable for water cooler capacity150 Ltrs.

S&F in replacement of PVC connection heavy duty 450mm long with brass unions at both ends with brass nuts, suitable for fixing to 15mm dia GI Pipe.

S&F in replacement of PVC float valve assembly with PVC ball suitable for water coolers all as specified.

S&F in replacement PVC flexible drain out pipe 25 mm dia bore as per sample by providing necessary GI clamps nut bolts etc. complete all as directed.

Supply and fix in replacement for bib tap cromium plated, cast copper alloy suitable for 15mm bore push type ISI marked.

Taking down unserviceable refrigerator of capacity 165-380 ltrs capacity single door/double door for servicing including checking all parts, and replacement of defective perts complete all as specified and directed at site. All spare parts required for replacement shall be measured and paid separately under respective items of sch)

Supply and fixing of hermetically sealed compressor for refrigerator 165 to 210 ltrs capacity with all accessories duly connecting and welding/ brazing with copper tubings etc and leak testing and charging of gas etc. complete including testing all as specified and directed. Make of compressor -Kirloskar/Tecumseh

All as above Ser No 163 but for Refrigerator of capacity 285-380.

Supply and fix in replacement starting/ running capacitor of capacity 10 MFD. Make-Universal/Usha/Aristo

Supply and fix in replacement relay for refrigrator as per sample.

Supply and fix in replacement thermostate for Refrigerator of any capacity as per sample.

Supply and fix in replacement rubber door gasket magnetic suitable for 165 to 380 ltrs capacity refrigerator including taking out old unserviceable.

Taking down unserviceable compressor unit from Deep freezer capacity 210 Ltr- 405 ltrs capacity and taking out the same for replacement all as specified and directed by Engr-in -charge (Supply and fixing of sealed compressor shall be measured and paid separately)

Supply and fixing of hermetically sealed compressor for Deep freezer of 210 ltrs capacity with all accessories duly connecting and welding/ brazing with copper tubings etc and leak testing and charging of gas etc. complete including testing all as specified and directed. Make of compressor -Kirloskar/Tecumsh/Voltas

Supply and fixing of hermetically sealed compressor for Deep freezer of 320-405 ltrs capacity with all accessories duly connecting and welding/ brazing with copper tubings etc and leak testing and charging of gas etc. complete including testing all as specified and directed. Make of compressor -Kirloskar/Tecumseh/ Voltas

Supply and fix in replacement starting capacitor of capacity 10 MFD asper sample.

S&F in replacement thermostate for deep freezer of capacity 210 to 405 ltrs. Make- Rentero/ Indfos

Opening carefully of Voltage stabiliser of capacity 0.5KVA, removing the old U/S transformer, rewinding of the transformer with super enamelled copper winding wire as per existing size/gauge refixing, connecting the same and testing complete all as specified.

All as above (Ser No -175) but Voltage stabiliser of capacity 1KVA

All as above (Ser No -175) but Voltage stabiliser of capacity 2.0/3.0KVA

All as above (Ser No -175) but Voltage stabiliser of capacity 4/5.0KVA

Supply and fixing in replacement of vegitable tray for refrigerator complete all as specified and directed.

Supply and fixing in replacement of ice chamber of refrigerator complete all as specified and directed.

M&L in replacement of burnt out sub main wiring with two single core of 4.0 Sqmm FRLSH, PVC insulated stranded copper cable 1100 volts grade in and including PVC Cassing -N-Capping including 4.0 Sqmm FRLSH,PVC insulated stranded copper cable 1100 volts grade as earth continuty conductor all as specified and directed.

S&F PVC insulated and sheathed flexible copper cable 3 core,70/0.0076, 1100 V grade. Make- Havells/ Plaza

Supply PVC insulated PVC sheathed flexible copper cable 3 core 40/0.0076 copper conducter 1100V grade Make - Finolex/Havells/Plaza

D G Corporation

M/S Deep-Jeet

M/s Brahamaputra Wood Industries

DRISTEE ASSOCIATES

M/S Bharat Construction Co.

M/S Inder SINGH SABARWALL

M/S Barua Enterprise