PROVISION OF FIXED FIRE FIGHTING SYSTEM FOR BUILDING P25A P25B AND P25E AT WECORS AT NAVAL DOCKYARD VISAKHAPATNAM UNDER GE (I) DM VISAKHAPATNAM

Surface excavation not exc 30cm deep and aveeraging 15cm deep and getting out in hard and dense soil complete all as specified and directed.

Removing excavating material waste materials obtained from item No. 1.01 after reuse) not exc 50M and depositing where directed at a level not exc 1.5M above the starting point all as specified and directed.

Excavating in trenches, not exc 1.5M wide and not exc 1.5 M in depth in soft / loose soil for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out all as specified and directed.

Excavating in trenches not exc 1.5M wide and exc 1.5 M in depth in soft / loose soil;for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and exc 1.5M in depth and getting out all as specified and directed.

Returning, filling in soil including spreading, leveling, watering and well ramming in layers not exc 25 cm all as specified and directed.

Removing excavated material to a distance exc. 1.5KM and not exc. 5KM all as specified and directed.

M&L for RCC (nominal mix) type B1, 1:2:4 (using 20mm graded stone aggregate) for foundations, including rafts, footings complete all as specified and directed.

M&Lfor formwork flat or curved to sides of concrete foundations, footings, bases of columns, and plinth beams and similar work vertical or to batter complete all as specified and directed.

M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions all as specified and directed.

M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges all as specified and directed.

M&L for Reinforced cement concrete M-30 (design mix) for beams, cantilevers, lintels, column pillars, piers, posts, struts, chullah hoods, staircase, arches, domes, vaults, shell roofs, arch ribs, folded plates, slabs, balconies, canopies, deck slab etc. or in similar articles upto 5th floor level complete all as specified and directed.

M&L for Reinforced cement concrete M-30 (design mix) in foundations, including rafts, footings, foundation beams, plinth beams, lintel beams, bases for columns, etc basement slabs, under reamed piles and mass concrete complete all as specified and directed.

S&F TMT bar 10mm dia and over cut to length , bent to shape required, hooking ends and binding with MS wire (annelled) not less than 0.9 mm dia complete all as specified and as directed.

S&F TMT bar 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for pre cast cement concrete type 1:3:6 type C-2 (20mm graded stone aggregate) block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M& L for two coat of wheather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer on newly plastered wall surfaces including preperation of surfaces etc complete all as specified and as directed.

M& L for two coats of distemper oil emulsion paint over a coat of primer on newly plastered wall surfaces including preperation of surfaces etc complete all as specified and as directed.

M& L for two coats of distemper oil emulsion paint over a coat of primer on newly plastered ceiling including preperation of surfaces etc complete all as specified and as directed.

M&L for hard core of gauge not exc. 63mm, deposited, spread and levelled in layers n exc. 10cm thick, watered and rammed to a true surface all as specified and directed.

M&L for 100mm thick in cement concrete type C2 1:3:6 (Using 20mm graded stone aggregate) as in plinth protection finished even and smooth with out using extra cement complete all as specified and directed.

M&L for 150mm thick in cement concrete type C2 1:3:6 (Using 20mm graded stone aggregate) as in floors finished even and smooth with out using extra cement complete all as specified.

M&L for 125mm thick in cement concrete type B1 1:2:4 (Using 20mm graded stone aggregate) as in floor finished even and smooth with out using extra cement complete all as specified and directed.

M&L for preparation of new steel surfaces of any descriptions over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/ zinc chrome complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per Sqm including cleaning of surfaces all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) shall be laid over entire roof surface and on vertical surface up to groves with other laps of 100mm. The over lap shall be sealed by flames complete all as specified.

M&L for plain, solid, straight chowkats and frames of 2nd class hardwood, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

M&L for plain, framed, panelled shutters of 1st class hardwood of 30 mm thickness (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face venners supplied and fitted to chowkats all as specified and directed.

S&F aluminium anodised barrel tower bolts of length 200 mm of extruded section and fixed all as specified and directed.

S&F aluminium anodised barrel tower bolts of length 150 mm of extruded section and fixed all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, of 200 mm length staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed all as specified and directed.

S&F in repairs extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed.

S&F butt hinges, of 125 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supporting and fixing in opening as per specification and drawing on page No-178 of SSR Part-II complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out MS tubes for top and bottom rails MS shall be cuvred with heat moulded plain colour PVC `C` channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame / sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing on page No-174 of SSR Part-II complete.

S&F powder coated anodized aluminium window or ventilator shutter, side hung type / top hung without sash bar,aluminium section weighing 0.55 kg/M including necessary jointing cleats, glazing clips, rubber packing handles 2 Nos, 2 Nos 100mm long tower bolt 2 Nos Hinges of 100 mm size typeB-21, in each shutter, and anodised aluminium snap beading screws etc., complete all as specified and directed.

M&L for powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for sheet glass of 4.8 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane all as specified and directed.

M&L for sheet glass of 4.8 mm thick ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane all as specified and directed.

S&F steel rolling shutters of 1.25 mm thick lath without ball bearing as specified including top cover anchoring rod hasp and staple and one shop coat of primer erected in position as indicated complete push pull or manual type all as specified and directed.

S&F safety lever locks mild steel with 4 levers for rolling shutters all as specified and directed.

S&F ball bearing for rolling shutters all as specified and directed.

M&L for glazed ceramic tiles of size 450x350x7-8mm) thick as in skirting/dado/vertical surfaces , including 10 mm thick 1:4 CM etc set and jointed in neat cement slurry provided in colured cement to match the coloured tiles all complete all as specified and directed.

M&L for light shed non skid ceramic tiles 7-8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick 1:6 cement morter complete all as specified and directed.

Supply and fix Viterous China wash down water closet pan (pedestal pattern), white and trap, including connection to drain(or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc, all complete all as specified and directed.

S & F Vitreous China Ware Wash hand basin white, flat back, size 450 x 300 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.

S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S & F soap dish vitreous china white of size 160x160x90 mm fixed to plug with chromium plated brass screw complete all as specified and directed.

S&Fchromium plated tubular towel rail D Type of 20mm dia bore and 600mm long comlete all as specified and directed.

S&F Waste pipes 32 mm dia LDPE ,UPVC pipes of pressure rating 6 Kg/cm2 for wash basins all as specified and directed.

S&F plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel C.P or Aluminium hinging device all as specified and directed.

S&F PVC low level flushing cistern 10 ltrs capacity including all fittings and brackets bends flush pipe etc and fixed complete all as specified and directed.

S/F PVC connection (high density) 15 mm dia 600 mm with PTMT nuts both ends with rubber washer all as specified and directed.

S & F 1000 ltr capacity rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks exc 500ltr but n exc 1000 ltr and removing to store complete all as specified and directed.

S & F fancy type chromium plated 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F 15 mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs all as specified and directed.

S&F 75mm bore PVC (SWR) soil, waste and vent pipes single socketed in any legth with rubber ring joint

s laid in floors or trenches all as specified and directed.

S & F 110 mm bore PVC (SWR) , waste and rain water pipes single socketed in any length with rubber ring joints complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius all as specified and directed.

M & L 75 mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110mm bore PVC SWR P trap all as specified and directed.

S&F 15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S&F 110mm bore PVC SWR S trap all as specified and directed.

Cutting chases, pinning in stone, concrete block or slab wall, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth in brick walls complete all as specified and directed.

S&F 20mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as specified and directed.

M&L for 50mm thick in cement concrete type B1 1:2:4 (Using 20mm graded stone aggregate) as in floor finished even and smooth with out using extra cement complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed bed of 15mm of 1:4 cement mortar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed of 15 mm of 1:3 cement mortar and jointed all as specified and directed.

Excavating over areas, not exc.1.5m deep and getting out in soft/loose soil all as specified and directed.

Excavating over areas, exc. 1.5m deep but not exc.3m and getting out in soft/loose soil complete all as specified and directed.

M&L for soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber, of 150mm thick in two layers all as specified and directed.

M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter fair finish complete all specified and directed.

M&L for Reinforced cement concrete M-30 (20mm graded aggegate) in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top offootings; including attached pilasters and buttresses complete all as specified and directed.

M&L rendering 15 mm, (10+5)mm thick two coat on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.

M&L For plastering of CM (1:3) Screed bed or bedding layer of mortar 20mm thick for laying floor finishes complete all as specified and directed.

M&L for precast cement concrete type B1 (1:2:4) (20mm graded stone aggregate) in drain covers setting in cement mortar (1:4) complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) of railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specfied and directed.

S&F For Cast iron soil, 200mm dia waste and vent pipes, inlet ,outlet pipes in any length with or without ears, with cement joints, laid in trenches and fixed to wall all as specified and directed.

[SCHEDULE 'A' PART-II [E/M WORKS]

S&F CI Bends (any radius),diminishing pieces or tapers(larger bore measured) all as specified and directed.

Supply, installation, testing and commisioning of 150mm dia 4 way fire brigade inlet with isolation valve with instantaneous SS coupling 63 mm dia with requried fittings as per IS all as directed by Engineer-in-Charge

Supply and fixing of DI Non return valve flanged type 40mm as per IS all as directed by Engineer-in-Charge

Supply and lay MS Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings of following sizes as per IS all as directed by Engineer-in-Charge. Note :-Supply & Fixing of flanged joints all included

Supply and lay DI Pipes 200mm dia heavy grade with all fittings laid in floors or fixed to walls and ceilings as per IS all as directed by Engineer-in-Charge. Note- Supply & fixing of flanged joints all included

Supply and fixing of Ball Valve size 40mm as per IS all as directed.

Supply and fixing of Suction strainer 200mm complete as per IS all as directed by Engineer-in-Charge.

Supply and installation of flanged type complete of size 200 mm dia Sluice Valve Class PN 1.5 as per IS all as directed.

Supply and installation of flanged type complete of size 150 mm dia Sluice Valve Class PN 1.6 as per IS all as directed by Engineer-in-Charge.

Supply and installation of flanged type complete of size 100 mm dia Sluice Valve Class PN 1.6 as per IS all as directed by Engineer-in-Charge.

Supply and installation of flanged type DI non return valve as per IS :5312 complete of size 200 mm dia as per IS all as directed by Engineer-in-Charge.

Supply and installation of flanged type DI non return valve as per IS :5312 complete of size 100 mm dia as per IS all as directed by Engineer-in-Charge.

Supply and fix of DI foot valve 200mm Dia as per IS all as directed by Engineer-in-Charge.

Supply and fix of DI foot valve 100 mm Dia as per IS all as directed by Engineer-in-Charge.

Supply and fix Fire Hydrant stand post to fix single out fire hydrant valve confirming IS:908 all as specified and directed.

Supply and fix Fire Hydrant valve single headed valve size 63mm as per IS all as directed by Engineer-in-Charge.

Supply and fix Hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white internal as per IS all as directed by Engineer-in-Charge.

Supply and fix Fire Hose pipe 15 mtr with Stainless Steel male female Coupling Dia 63mm Hose pipe and nozzle confirming to IS:903 all as specified and directed

Supply and fix Fire Hose Reel drum including 30m hose reel of dia 20 mm as per IS all as directed by Engineer-in-Charge.

Supply and fix fire Material and labor for fabrication of steel supports all as specified and directed.

Material and labor for fitting the flanged pipes bends, tapers, Tee pieces (single & double branch) any type and angle/radius and straight connecting pieces but all ends flanged all as specified and directed.

Supply and fix rotational moulded polythylene water storage tanks 1500 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position as per IS complete all as specified and directed.

Supply and fix rotational moulded polythylene water storage tanks 2000 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position as per IS complete all as specified and directed.

S & F brass ball valve 25 mm dia high pressure with polythene float and flynut complete all as specified and as directed.

Supply and fix of Analog under ground Sump Water Level Indicator Complete as per IS all as directed by Engineer-in-Charge.

Supply, installation, testing and commissioning of horizontal electric driven centrifugal pump set of, 1500 RPM, 70 Mtrs head, 450LPM discharge capacity to maintain 3.5 kg/cm2, including Dual Starter , Cable all Electrical Accessories complete including PCC (1:2:4), type B1) foundation complete with copper lugs, 2 Nos of body earthing of suitable size and connected to earth electrode as specified and directed by Engineer-in-Charge.

Supply, installation, testing and commissioning of horizontal IC engine driven centrifugal pu

mp set of, 1500 RPM, 90 Mtrs head, 2850LPM discharge capacity to maintain 3.5 kg/cm2, complete including PCC (1:2:4), type B1) foundation complete all as specified and directed by Engineer-in-Charge.

Supply, installation, testing and commissioning of horizontal electric driven centrifugal pump set of, 1500 RPM, 90 Mtrs head, 2850LPM discharge capacity to maintain 3.5 kg/cm2, including Dual Starter , Cable all Electrical Accessories complete including PCC (1:2:4, type B1) foundation complete with copper lugs, 2 Nos of body earthing of suitable size and connected to earth electrode as specified and directed by Engineer-in-Charge.

Supply and installation of jockey pump of, 90 Mtrs head, 180 LPM discharge with minimum pressure of 3.5 Kg. cm2 including Dual Starter , Cable all Electrical Accessories coupled with complete eletric, located on terrace connected to terrace tank with non return valve on delivery side, starting of terrace pump shall be automatic with pressure swtich incorporated and necessary control wiring complete all as specified and directed by Engineer-in-Charge.

S & F Panel board (main) made out of CRCA sheet 2mm thick indoor cubical type totally enclosed with front opening, hinged doors with projected and raised platform of suitabe size weather and water proof with necessary lockig arrangements including as per IS8623 aluminium bus bar with half neutral insulators suitable for 3 phase 4 wire LTAC, 50 Hz 415 Volts 300 Amps, with metering faciltity, capacity complete with two coats of primer red oxide necessary internal electrical connection as required and provisio of removal and fixing of the following switch gears from the existing panel. (a) MCCB 4 pole 415 Volts, 300 amps, 50 KA -01 No As incomer (b) MCCB 3 pole 415 volts, 250 amps, 50 KA-02 Nos As outgoing (c) MCB TPN 415 volts,63 amps - 01 Nos

(d) MCB TPN 415 volts,32 amps - 03 Nos (e )Star delta starter 100 KW 02 Nos (f) Star delta starter 10 KW 01 No Microporcessor based programmed micro controller for Auto/ manual start provision with indications,

Supply and fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 300 sq. mm 3.5 core though wall/trench/surface complete all as specified and as directed by Engineer-in-Charge.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth and getting out in soft disintegrated rock (considered for road cutting) all as specified and directed by Engineer-in-Charge.

M&L for dry sand cushioning for under ground cable provided with layer and sand 8 cm deep before laying the cable and 15cm after laying the cable complete all as specified and directed.

Supply and laying GI pipe heavy duty of size 100mm passing through trench/road complete all as specified and as directed.

Supply and laying well burnt bricks sub class 'B' laid breath wise along the length of cable in trench for underground cable protection complete all as specified and directed.

Supply, install, test and commissioning of electrical operated water pressure switch with necessary mounting/ connection with control wiring with conductor and mechnanical connection to operate at pressure range of 0 to 10 kg/ Sq.cm for automation all as specified and directed.

Supply and fix LED building security light 70W IP 66 rated including supply and fixing with 40mm dia medium grade GI pipe bracket 1.5 mtr long bent to shape, mounted on pole/wall with suitable clamps nuts and bolts and all accessories complete including connection with 3 core PVC insulated sheathed flexible cable with multistranded copper conductor cable from ceiling rose to fitting terminal including taking down old unsv one all as specified and directed

S & F Water pressure gauge 4"dial 0-21 kgs rating standard delivery side & Suction side of pump sets complete tubing, fitted with stop cock etc.,Complete all as per standard practice and all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

One fan point controlled by one 5 Amps switch one way

One 3/5 pin 5 Amp switch socket outlet on independent board

M&L concealed point wiring with with 1.5 sq mm (nominal area), PVC insulated, stranded single core unsheathed FRLS copper conductor cable drawn through with PVC conduit medium grade with all fittings and accessories of PVC conduit/ casing caping (like Tee, bend etc) complete fixed to walls etc with and including 1.5 sqmm (nominal area) PVC insulated stranded single core unsheathed FRLS copper cable as earth continity wire connecting to common earth point including supply & fixing of galvanized pressed mild steel Modular terminal boxes of suitable size as require for fixing modular switch socket regulator etc. complete all as specified and directed including necessary chase cutting for conduits to walls, floors and sinking boxes and making good to walls, floors complete all as specified and directed.

One light point controlled by one 5 Amps switch one way

M&L concealed point wiring with with 2.5 sq mm (nominal area), PVC insulated, stranded single core unsheathed FRLS copper conductor cable drawn through with PVC conduit medium grade with all fittings and accessories of PVC conduit / casing caping (like Tee, bend etc) complete fixed to walls etc with and including 2.5 sqmm (nominal area) PVC insulated stranded single core unsheathed FRLS copper cable as earth continity wire connecting to common earth point including supply & fixing of galvanized pressed mild steel Modular terminal boxes of suitable size as require for 3/5 pin socket outlet 15 Amps complete all as specified and directed including necessary chase cutting for conduits to walls, floors and sinking boxes and making good to walls, floors complete all as specified and directed.

S&F 5/15 Amps modular switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal all as specified and directed.

S&F SPN DB 8 Way double door with 200 amp rated bus bar all as specified and directed.

S&F SPN MCB 32 Amps C Curve complete all as specified and directed.

S&F SP MCB 6 to 32 Amps C Curve complete all as specified and directed.