Restoration of Forest Store Rirkumar

Amount

Excavation in foundation, trenches etc in earth work all kind of soils such as pick work jumper work , blasting in soft/hard rock, chiseling/wedging out of rock/where blasting prohibited) saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge in all leads and lifts.

Providing and laying cement concrete 1:6:12 ( 1 Cement: 6 Sand : 12 graded stone aggregate 40 mm niminal size) and curing complete excluding the cost of form work foundation and plinth in all leads and lifts.

Random rubble stone masonry coursed with hard stone of approved quality in foun. & Plinth i/c racking out of joints in CM 1:6 in all leads & lifts.

Brick work using common burnt clay building bricks in foundation and planth in super-structure above plinth level upto floor two level upto floor two level (second class bricks ) Cement morter 1:6 (1 Cement : 6 Sand) Second class bricks

Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6(1 Cement :3 Sand: 6 graded stone aggregate 20 mm nominal size)

Providing wood work in frames of doors, windows, clerestory , windows and other frames wrought, framed and fixed in position. 2nd class deodar wood

Providing and fixing panelled glazed of panelled and glazed shutters for doors windows and clerestory windows . Including black enamelled iron butt hings with necessary screws. 40mm thick 2nd class deodar wood.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish including centring, shutering, strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in. A. Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc. upto 20mm.

Providing and laying cement concrete 1:2:4 (1 Cement :2 Sand : 4 Graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced Concrete work in : suspended floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor two level

Providing mild steel / tor steel reinforcement for R.C.C work including bending, binding and placing in position complete upto floor two level Tor Steel.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete 250x16mm.

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and color with screws etc. complete 250x10mm

Providing and fixing aluminium handles anodized transparent or dyed to required color & shade with necessary screws etc. complete 10mm

20mm cement plaster in two coats, backing coat 15mm and finishing coat 5 mm thick on rough side of brick/stone masonry walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth. cement mortar 1:4 (1 Cement: 4 Sand)

6 mm cement plaster 1:3 (1 Cement : 3 sand) finished with a floating coat of near cement and thick coat of ilimewash on top of wall when dry for bearing of R.C.C. Slabs and beams.

Stone / boulder filling under floors/behind retaining walls.

Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form workin:0921010A foundation and plinth

Painting two coats (excluding priming coat) on new wood based surface with ready mixed paint brushing the give and even shade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white in all leads and lifts.

Wall painiting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/ plastered wall surfaces to give an even sahde including thorughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface.

sanjeev singh govt contractor (BID ID -451121)