Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.2 LAccepted-AOC | L1 | Accepted-AOC Over all rates are reasonable and lowest. | |
| 2 | L2₹42.0 L+₹8.2 L (24.4%)Rejected-Finance | L2 | Rejected-Finance Over all rates are higher than L-1. | |
| 3 | L3₹45.7 L+₹12.0 L (35.4%)Rejected-Finance THIRIYA NIZAWAT KHAN JAMAMASZID WARD NO 07 BAREILLY 2430021 UP | BAREILLY | UTTAR PRADESH | 243002 | L3 | Rejected-Finance Over all rates are higher than L-1. | |
| 4 | L4₹47.5 L+₹13.8 L (40.7%)Rejected-Finance | L4 | Rejected-Finance Over all rates are higher than L-1. |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
11 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST BAREILLY
GE WEST BAREILLY
PROVISION OF LED LIGHT FITTINGS FOR CERTAIN LOCATIONS IN REPLACEMENT OF OLD LIGHT FITTINGS AND PROVN OF CERTAIN E/M MINOR WORKS UNDER AGE E/M OF GE (WEST) BAREILLY.
2023_MES_623174_1
8159/C/E8
Open Tender
Civil Works
Item Rate
180 days
GE WEST BAREILLY
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE WEST BAREILLY
₹98,000
Yes
22 Nov 2023
14 Oct 2023
13 Nov 2023
14 Oct 2023
11 Nov 2023
30 Oct 2023
Amount
Taking down carefully light fitting of any type and capacity from ceiling, wall etc. complete all as specified and directed.
Supply and fixing of basic all purpose surface and wall mounted LED batten light 20 Watt capacity, 4 feet long, 220 Volts, 50 Hz with seprate drivers, holder and all accessories duly prewired alongwith making connection complete all as specified and directed.
Supply and fixing of basic all purpose surface and wall mounted LED batten light 10 Watt capacity, 2 feet long, 220 Volts, 50 Hz with seprate drivers, holder and all accessories duly prewired alongwith making connection complete all as specified and directed.
Supply and fixing of precisely designed decortative PMMA diffuser 2' X 2' panel light LED luminaire 36 watt capacity, 220 Volts, AC recessed type with high efficiency soft glare free light complete with driver, holders and all accessories duly prewired alongwith making connection complete all as specified and directed.
Supply and fixing of precisely designed decortative PMMA diffuser 1' X 4' panel light LED luminaire 36 watt capacity, 220 Volts, AC recessed type with high efficiency soft glare free light complete with driver, holders and all accessories duly prewired alongwith making connection complete all as specified and directed.
Supply and fixing LED energy saving long life, corrosion resistant, impact proof surface mounting IP-66 luminaire with PC housing & opal finish suitable for outside area wall sec light fitting 20 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket complete including GI pipe bracket 32/40 mm with clamp and connection complete all as specified and directed.
Supply and fixing recess mounted pressure die cast aluminium luminaire in power coated white finish in round shape 10 watt 220 volts AC , high efficiency suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fixing energy saving surface mounted 10Watt bulkhead luminaires complete with all aceesories connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fix in repairs LED lamp 14 watt emergency back up 220 Volts complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/dence soil for laying of LT UG cables/base for Pole etc complete all as specified and directed.
Returning, filling in, including spreading levelling, watering and well ramming in layers not exceeding 25 cm thick in hard/dense soil complete all as specified and directed.
Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
M&L for sand cushioning laid in trenches for laying of LT UG cables complete all as specified and directed. ( Note Punned thickness of cable shall be measured)
M&L common burnt clay building bricks, sub-class ‘B’ designation-75 for LT UG cable protection complete all as specified and directed.
Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm, 4 core complete all as specified and directed.
S & F in GI pipe light grade for cable protection, fixed to pole/ alongwall/ floor/ under road/ across the drain or nallaha etc of sizes 40 mm bore complete all as specified & directed.
Supply and fixing LED flood lights 200 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
S & F Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long) complete all as specified and directed.
M & L for Cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size complete all as specified and directed.
S&F loop-in-loop out box of size 30x20x20cm made out from 1.6mm thick PVC sheet weather proof, dust and vermin proof with hinged door and locking arrangements with slanting cover on top and provision of 2 Nos aluminium bus bar of size 25mm x 2mm-4 Nos fixed on insulator and one MCB of capacity 6 Amps complete fixed on pole with and including suitable size MS flat iron clamps, nuts,bolts & washers etc complete all as specified and directed.
M & L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.
M & L for Earthing complete with galvanised GI earth plate eletrode 600x600x6mm thick,burried directly in ground (earth pit not less than 2.25 m deep (below GL) with top edge of the plate n. less than 1.5mtr below normal. GL surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate using 4mm dia GI wire as earth wire electrode welded and riveted to earth plate at one end connected to main DBs of Bldg at another end GI earth wire encased in and including 15mm dia GI light grade pipe through upper end of earth plate upto main DB of bldg with 20mm bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate MS funnel with wire mesh fixed on water pipe and Provn of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) duly reinforced with MS bars 8mm dia @ 150C/c with both ways complete with lifting handle all as shown in electrical plate No 3 of MES SSR Part-I (2009 - Specifications) complete all as specified and directed by Engr-in-charge.
Supply and fixing Air termination, single pointed, copper rod 12mm dia and 300mm long complete all as specified and directed.
Supply and fixing Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25 mm long hexagonal head screws complete all as specified and directed.
Supply and fixing Copper strip 20 x 3.15 mm with saddles and fixing screws etc.for roof conductors and down conductors above ground complete all as specified and directed.
Supply and fixing copper strip 32x6 mm burried in to ground for ring conductor and necessary jointiong work shall be carried out by brazing work complete all as specified and directed.
M&L for GI pipe 40 mm bore medium grade with fittings and provision of nut, bolt and welding work as required at site to fix air termintion rod complete all as specified and directed.
M&L for PCC (1:3:6) type C2 using 40 mm graded aggregate for making blocks for fixing air termination complete all as specified and directed.
M & L for Earthing complete with copper earth plate electrode of size 600 mm x 600 mm x 3.15 mm thick buried directly in ground (earth pit of depth not less than 2.25 metre below ground level) with top edge of the earth plate not less than 1.50 metre below normal ground level, surrounded from all sides by mixture of charcoal and common salt 15 cm thick each layer and electrode connected to and including copper earth strip of size 20 mm x 3 mm by means of bolts, nuts, check nuts and washers of brass or stainless steel, protection pipe light grade 40 mm dia and GI pipe light grade 20 mm dia bore for watering, funnel with wire mesh, earthing chamber with PCC (1:2:4) type B-1 using 20 mm graded stone aggregate, 80 mm thick precast RCC 1:1.5:3 type A-1 cover duly reinforced with XPM (weight not less than 3 kg/sq m) and frame including all excavation and earth work all as shown in electrical plate No. 3 connected to earthing test point complete all as specified and as directed including testing on completion. Note : The unit rate includes for 40 mm light grade protecton pipe and copper earth strip from top of earth plate upto 7.50 metre above ground level. The earth pit shall be constructed atleast 1.5 m away from the top of earth electrode complete all as specified and directed.
Note :- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.
S.S.ENTERPRISES
S S ELECTRICALS
LEEJA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .