SITC of 7.0 Mtr.- Hot Dip galvanised Octagonal type Streetlight Pole with 90 W LED Streetlight fitting with allied accessories including five years free maintenance gurantee period for Olpad Industrial Estate, GIDC, Surat (Re-Invite)

DESCRIPTION QTY UNIT Rate/Unit

Supplying and erecting approved make Octagonal pole

made from HR sheet steel. The pole should be made as per

IS. and shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm

Hylam sheet. standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for

1 cable termination to be erected With Suitable foundation Ea

(Included) as per details given by manufacturer

considering site requirement.(E) 7 Mtr. Long 70 mm Top X

135 mm bottom dia, 3 mm thickness with

225mmX225mmX16mm base plate, 4-M20 Bolts and

600mm long with necessary G.I. J Bolts .Approx Pole weight

Providing and fixing of Solderless

Crimping Type Aluminium Lugs (4 Nos.

2 per termination) conforming to IS suitable Ea

for cable of following size evenly crimped with high 57.00

pressure tool & connected to switchgear terminals with

brass/cadium plated nut bolts in an approved manner. (B)

10 Sq. MM (As Per Make List)

Providing & erecting approved make of SP MCB 6A to 25A

Miniature circuit breaker single pole 6A to 25A suitable to

operate on 240V AC system and having breaking capacity

3 10 kA to be erected in existing box confirming to IS Ea

8828/1998 with ISI/ CE Mark,Cat-III. (Make will be as per 57.00

attched make list)

Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

4 coupling and buch buried in specially prepared earth pit Ea

complete with necessary 8 SWG earth wire.

Providing and erecting Street Light pole bracket comprising

main B Class GI pipe of 4.2 cm/require outside dia.

complete with suitable B Class G.I. sleeve tubing of approx.

45cms.length and suitable for 76.5 mm /80mm / required

size of pole top having sufficient fasteners for fixing the

brackets and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays, reducer

5 and with check nuts complete painted with one coat of Red Ea

oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms. [A] Single Arm

Bracket 1.5 Mtr

Bidder Signature Executive Engineer (M&E),

GIDC, Vapi/Surat.

Supplying and erecting LED street light fittings with High

power White LEDS wattage of 1 Watt and above assembled

on single MCPCB, efficiency more than 130 Im/w and

corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved

or embossed 160 to 270 V.Power Factor more than 0.95,

THD< 10%, CCT 5000 K to 5700K, Uniformity ratio 0.45,

Luminaire efficacy> 130 lumens/watt LED driver

efficiency> 85 % ( fittings required LM 79 & LM-80

6 certificates) (NOTE Below description have shown ranges Ea

of Wattage capacity of LED fittings The Engineer incharge

may select any wattage capacity between the ranges

(A) Street Light (IP-66), Surge protection -4KV integral and

Light must have 440VAC line supply with over-voltage

protection. (iv). Above 90 Watt. Make:-

CREE/OSRAM/PHILIPS/Nessa/Lumileds/NICHIA/SEOUL/

BridgeLux (U.S.A) make LED used for luminaire ( fittings

required LM 79 & LM-80 certificates)

Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of

7 following size to be erected as directed.(h) 2.50 Sq.mm 3 Mtr

core round PVC sheathed

Providing and erecting XLPE (IS:7098)(1)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with

8 core) necessary clamps or in existing trench / pipe of Mtr

following size of cables. © 4 core 10 Sq.mm. (Make: 1,995.00

RR/KEI/Havells/Polycab)

Providing & laying of approved make Doubled Walled

Corrugated Pipes (DWC) of polyethylene (conforming to IS

14930 - II) with necessary connecting accessories of same

9 material at required depth in existing trench for laying of Mtr

cable. below ground / road surface for enclosing cable. (A)

50 mm outer dia. (As Per Make List)

Providing & laying of approved make Doubled Walled

Corrugated Pipes (DWC) of polyethylene (conforming to IS

14930 - II) with necessary connecting accessories of same

material at required depth in existing trench for laying of

10 cable. below ground / road surface for enclosing cable. (C) Mtr

90 mm outer dia. (As Per Make List)

Bidder Signature Executive Engineer (M&E),

GIDC, Vapi/Surat.

Supplying & erecting in earthpit of minimum bore dia.

225mm size approved make Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 80 mm having 80-200 Micron galvanising, Inner

pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic

11 value surrounded by highly conductive compound with 2.00 Ea

high charge dissipation suitable for following type of

applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate

including value of earth resistane of installation.[A] For

electrical installation up to 440 V

Length of Pipe - 1 Mtr

Back filling compound - 1 Nos. of Bag of 15 Kgs.

Drilling the road without breaking the road surface

(Asphalt) for laying of cable for feeding power supply by

12 making up to following size of holes at both ends Mtr.

complete.(B) Up to 150 mm bore dia

Making trench in soft soil of suitable width of 90 cm deep

for laying cable or locating the fault all over the run and

13 back filling the same and making the surface as normal Mtr.

Bidder Signature Executive Engineer (M&E),

GIDC, Vapi/Surat.

Providing and erecting Three Phase IoT GSM/GPRS Central

Control & Monitoring System (CCMS) Panel for Streetlights

Smart Feeder Panel with 3 Phase GSM/GPRS CCMS

Streetlight Controller with LCD Display (1 Nos.). Streetlight

Controller with Individual each Phase Control (Energy

Saving feature) and Spare relay facility. Streetlight

Controller having 10 years of reserved battery for RTC.

With 50 programmable schedule, month-wise offset

settable facility, Astronomic sunrise/sunset time

programming in-built for year long schedule. Operating

Voltage @ 440 V AC with Over Voltage & Short Circuit

protection. 2 hour Battery Back-up for Streetlight

Controller. Panel to have 1 Nos. of 3 Phase – Class 1 Energy

Meter for Energy & Fault monitoring on CCMS Web

Dashboard. Panel consisting of 3 Nos. of 3 Pole Contactors

(3 x 18 A), 7 Nos. of 1 Pole Miniature Circuit Breakers (32

Amp.) for Bypass, Input / Output supply functionalities,

Nos. of 4 Pole Earth leakage circuit breaker for safety

protection. Standard lock & key facility for Panel

security.Door Switch for unauthorized access & tamper

detection. Accelerometer for panel movement detection &

tamper alerts. Suitable amount of Wires, Connectors,

Terminal Blocks included in Panel. 16/18 gauge M S with

industrial exterior powder coated PP with seven tank

process RAL 7035 All weather-proof Enclosure Panel

having IP65 rating. Waterproof Glands & Grounding Stand

included. Dedicated IoT communication GSM/GPRS SIM

Card (with minimum 5 years of recharge) for Wireless

Communication with CCMS Web Dashboard. 5 Years Data

Hosting & Server Charges to be included with CCMS Web

Dashboard. Load status, Live analytics, Energy Meter

monitoring (Parameters such as kW, kWH, PF, I, V),

comparative analytics, reports generation facility. Fault

detection on web dashboard. GIS Mapping of CCMS Panel on

Web Dashboard. Secured MQTT Communication for Cloud.

Includes Android & iOS Mobile Application. Local

communication facility via Mobile Application in case of

GPRS connectivity failure.

Providing & erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections & complete

15 erected in existing 16 G.M.S. housing. (Cat - III) suitable to 2.00 Ea

work on AC supply with all internal connection-ICS=100%

of ICU only.(1 No. per Distribution Box) (Make will be as per

attched make list)

Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

16 following size of cables.(c) 2 to 4 core 10 Sq. mm (Make will 6.00 Ea

be as per attched make list)

Bidder Signature Executive Engineer (M&E),

GIDC, Vapi/Surat.

Making trench in Hard Murrum / Tar Road of suitable width

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground. 100.00

Providing , erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections

complete with cutting, welding, grinding & finishing duly

18 painted with one coat of red oxide with erection on site as Kg.

per direction of engineer in charge with necessary grouting, 60.00

cementing, plastering & finishing complete.

Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per

approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary accesories

supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal partitions

& cable alley as per requirements & instruction of engineer-

in-charge with erection of supplied switch gears, BUSBARS,

suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus & earth

bolts, foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and

rubber gasket,heavy duty end terminal connection,danger

notice board,necessary ventilation,earthing strip complete.

19 The Panel shall be painted with epoxy powder coating. (The 1.00

rates excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips, meters,

Fuses etc. The dimension shall be measured excluding base

beams) The panel shall be supplied with following

approved manufacturers with following size.(C) The

standard companies switch gear shall be used and only

manufacturers as per IEC 61439 for beneficial use. (iv) with

Bidder Signature Executive Engineer (M&E),

GIDC, Vapi/Surat.

Providing and Supplying ISI mark G.I. Pipes with Couplings

of following class and diameter including all taxes,

insurance, transportation, frieght charges, octroi,

20 inspection charges, loading, unloading, conveyence for Rmt.

departmental stores, stacking etc complete (IS-1239). 12.00

Heavy Duty 80 mm

Agency has to do successful operation and maintenance of

Street light network by using their manpower, material,

tools & tackles etc. for 5 Years Operation & Maintenance.

Payment will be released monthly based on certificate of

successful operation and maintenance of installed street

light network by DEE[M&E], GIDC, Surat in this work. More

criteria of successful operation and maintenance is Pole-

21 described in technical specification with 5 Years Free mont

Comprehensive Guarantee period. Total Quantities are as 3,420.00

follows: Operation of 57 poles for 60 months i.e. 57*60=

Total Amount Rs.:- 21,83,484.00 /-

Total Amount Rs.:- 21,83,484.00 /-

The Unit rates specified for various items to be executed as per Schedule "B" attached with the

Price Bid are excluding GST but inclusive all labours, materials, testing charges, equipments, all

incidental charges involving in the work and as specified in the Mode of measurement & payment

of detailed specifications of items incl. all taxes, royalty, octori, transportation cost etc. all as

applicable presently as to be enforced for future by any / all including Central/State Government

& Statutory bodies from time to time.

I/We agree to carry out above work at % above the estimated Rate put to tender

Percentage in words (_ )

I/We agree to carry out above work at % below the estimated Rate put to tender

Percentage in words (_ )

Estimated Amount put to Estimated Amount put to

Tender Rs. 21,83,484.00/- Tender Rs. 21,83,484.00/-

Add % Above Rs. . Deduct % Below Rs.

Net Amount Rs. (In figures). Net Amount Rs. (In figures)

Rs. (In Words). Rs. (In Words)

I/we have read the condition mentioned in this tender and agree to abide by the same

Bidder Signature Executive Engineer (M&E),

GIDC, Vapi/Surat.